Skip to contentSkip to conversation

staging/adt7316 Fix some 'interesting' string operations

PATCH In review Luck, Tony 4 participants 5 messages Apr 4, 2013 – Apr 9, 2013

Subsystems (4)
lore
Share & tools
lore

Luck, Tony

author
#0 lore raw

PATCH 1/1 staging/adt7316 Fix some 'interesting' string operations

Calling memcmp() to check the value of the first byte in a string is overkill. Just use buf[0] == '1' or buf[0] != '1' as appropriate.

---

[Inspired by a rant on IRC about a different driver doing something similar]

drivers/staging/iio/addac/adt7316.c +13 -13
index 0b431bc..506b5a7 100644
@@ -256,7 +256,7 @@ static ssize_t adt7316_store_enabled(struct device *dev,
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	int enable;
 
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		enable = 1;
 	else
 		enable = 0;
@@ -299,7 +299,7 @@ static ssize_t adt7316_store_select_ex_temp(struct device *dev,
 		return -EPERM;
 
 	config1 = chip->config1 & (~ADT7516_SEL_EX_TEMP);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config1 |= ADT7516_SEL_EX_TEMP;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, config1);
@@ -495,7 +495,7 @@ static ssize_t adt7316_store_disable_averaging(struct device *dev,
 	int ret;
 
 	config2 = chip->config2 & (~ADT7316_DISABLE_AVERAGING);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config2 |= ADT7316_DISABLE_AVERAGING;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG2, config2);
@@ -534,7 +534,7 @@ static ssize_t adt7316_store_enable_smbus_timeout(struct device *dev,
 	int ret;
 
 	config2 = chip->config2 & (~ADT7316_EN_SMBUS_TIMEOUT);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config2 |= ADT7316_EN_SMBUS_TIMEOUT;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG2, config2);
@@ -597,7 +597,7 @@ static ssize_t adt7316_store_powerdown(struct device *dev,
 	int ret;
 
 	config1 = chip->config1 & (~ADT7316_PD);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config1 |= ADT7316_PD;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, config1);
@@ -635,7 +635,7 @@ static ssize_t adt7316_store_fast_ad_clock(struct device *dev,
 	int ret;
 
 	config3 = chip->config3 & (~ADT7316_ADCLK_22_5);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config3 |= ADT7316_ADCLK_22_5;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, config3);
@@ -681,7 +681,7 @@ static ssize_t adt7316_store_da_high_resolution(struct device *dev,
 
 	chip->dac_bits = 8;
 
-	if (!memcmp(buf, "1", 1)) {
+	if (buf[0] == '1') {
 		config3 = chip->config3 | ADT7316_DA_HIGH_RESOLUTION;
 		if (chip->id == ID_ADT7316 || chip->id == ID_ADT7516)
 			chip->dac_bits = 12;
@@ -731,7 +731,7 @@ static ssize_t adt7316_store_AIN_internal_Vref(struct device *dev,
 	if ((chip->id & ID_FAMILY_MASK) != ID_ADT75XX)
 		return -EPERM;
 
-	if (memcmp(buf, "1", 1))
+	if (buf[0] != '1')
 		config3 = chip->config3 & (~ADT7516_AIN_IN_VREF);
 	else
 		config3 = chip->config3 | ADT7516_AIN_IN_VREF;
@@ -773,7 +773,7 @@ static ssize_t adt7316_store_enable_prop_DACA(struct device *dev,
 	int ret;
 
 	config3 = chip->config3 & (~ADT7316_EN_IN_TEMP_PROP_DACA);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config3 |= ADT7316_EN_IN_TEMP_PROP_DACA;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, config3);
@@ -812,7 +812,7 @@ static ssize_t adt7316_store_enable_prop_DACB(struct device *dev,
 	int ret;
 
 	config3 = chip->config3 & (~ADT7316_EN_EX_TEMP_PROP_DACB);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config3 |= ADT7316_EN_EX_TEMP_PROP_DACB;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, config3);
@@ -1018,7 +1018,7 @@ static ssize_t adt7316_store_DA_AB_Vref_bypass(struct device *dev,
 		return -EPERM;
 
 	dac_config = chip->dac_config & (~ADT7316_VREF_BYPASS_DAC_AB);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		dac_config |= ADT7316_VREF_BYPASS_DAC_AB;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_DAC_CONFIG, dac_config);
@@ -1063,7 +1063,7 @@ static ssize_t adt7316_store_DA_CD_Vref_bypass(struct device *dev,
 		return -EPERM;
 
 	dac_config = chip->dac_config & (~ADT7316_VREF_BYPASS_DAC_CD);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		dac_config |= ADT7316_VREF_BYPASS_DAC_CD;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_DAC_CONFIG, dac_config);
@@ -1982,7 +1982,7 @@ static ssize_t adt7316_set_int_enabled(struct device *dev,
 	int ret;
 
 	config1 = chip->config1 & (~ADT7316_INT_EN);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config1 |= ADT7316_INT_EN;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, config1);
#1 lore raw
Quoted 4 lines · Tony

Calling memcmp() to check the value of the first byte in a string is overkill. Just use buf[0] == '1' or buf[0] != '1' as appropriate.

I'll let Jonathan take this through his tree which eventually makes it to mine.

thanks,

greg k-h

Acked-by on v1 1/1
#2 lore raw
In reply to Luck, Tony
Quoted 5 lines · Tony

Calling memcmp() to check the value of the first byte in a string is overkill. Just use buf[0] == '1' or buf[0] != '1' as appropriate.

I think it is a good idea to switch directly to strtobool. But anyway, if you don't want to respin the patch it is fine as it is.

Quoted 130 lines

---

[Inspired by a rant on IRC about a different driver doing something similar]

drivers/staging/iio/addac/adt7316.c +13 -14
index 0b431bc..506b5a7 100644
@@ -256,7 +256,7 @@ static ssize_t adt7316_store_enabled(struct device *dev,
 	struct adt7316_chip_info *chip = iio_priv(dev_info);
 	int enable;
 
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		enable = 1;
 	else
 		enable = 0;
@@ -299,7 +299,7 @@ static ssize_t adt7316_store_select_ex_temp(struct device *dev,
 		return -EPERM;
 
 	config1 = chip->config1 & (~ADT7516_SEL_EX_TEMP);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config1 |= ADT7516_SEL_EX_TEMP;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, config1);
@@ -495,7 +495,7 @@ static ssize_t adt7316_store_disable_averaging(struct device *dev,
 	int ret;
 
 	config2 = chip->config2 & (~ADT7316_DISABLE_AVERAGING);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config2 |= ADT7316_DISABLE_AVERAGING;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG2, config2);
@@ -534,7 +534,7 @@ static ssize_t adt7316_store_enable_smbus_timeout(struct device *dev,
 	int ret;
 
 	config2 = chip->config2 & (~ADT7316_EN_SMBUS_TIMEOUT);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config2 |= ADT7316_EN_SMBUS_TIMEOUT;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG2, config2);
@@ -597,7 +597,7 @@ static ssize_t adt7316_store_powerdown(struct device *dev,
 	int ret;
 
 	config1 = chip->config1 & (~ADT7316_PD);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config1 |= ADT7316_PD;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, config1);
@@ -635,7 +635,7 @@ static ssize_t adt7316_store_fast_ad_clock(struct device *dev,
 	int ret;
 
 	config3 = chip->config3 & (~ADT7316_ADCLK_22_5);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config3 |= ADT7316_ADCLK_22_5;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, config3);
@@ -681,7 +681,7 @@ static ssize_t adt7316_store_da_high_resolution(struct device *dev,
 
 	chip->dac_bits = 8;
 
-	if (!memcmp(buf, "1", 1)) {
+	if (buf[0] == '1') {
 		config3 = chip->config3 | ADT7316_DA_HIGH_RESOLUTION;
 		if (chip->id == ID_ADT7316 || chip->id == ID_ADT7516)
 			chip->dac_bits = 12;
@@ -731,7 +731,7 @@ static ssize_t adt7316_store_AIN_internal_Vref(struct device *dev,
 	if ((chip->id & ID_FAMILY_MASK) != ID_ADT75XX)
 		return -EPERM;
 
-	if (memcmp(buf, "1", 1))
+	if (buf[0] != '1')
 		config3 = chip->config3 & (~ADT7516_AIN_IN_VREF);
 	else
 		config3 = chip->config3 | ADT7516_AIN_IN_VREF;
@@ -773,7 +773,7 @@ static ssize_t adt7316_store_enable_prop_DACA(struct device *dev,
 	int ret;
 
 	config3 = chip->config3 & (~ADT7316_EN_IN_TEMP_PROP_DACA);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config3 |= ADT7316_EN_IN_TEMP_PROP_DACA;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, config3);
@@ -812,7 +812,7 @@ static ssize_t adt7316_store_enable_prop_DACB(struct device *dev,
 	int ret;
 
 	config3 = chip->config3 & (~ADT7316_EN_EX_TEMP_PROP_DACB);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config3 |= ADT7316_EN_EX_TEMP_PROP_DACB;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG3, config3);
@@ -1018,7 +1018,7 @@ static ssize_t adt7316_store_DA_AB_Vref_bypass(struct device *dev,
 		return -EPERM;
 
 	dac_config = chip->dac_config & (~ADT7316_VREF_BYPASS_DAC_AB);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		dac_config |= ADT7316_VREF_BYPASS_DAC_AB;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_DAC_CONFIG, dac_config);
@@ -1063,7 +1063,7 @@ static ssize_t adt7316_store_DA_CD_Vref_bypass(struct device *dev,
 		return -EPERM;
 
 	dac_config = chip->dac_config & (~ADT7316_VREF_BYPASS_DAC_CD);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		dac_config |= ADT7316_VREF_BYPASS_DAC_CD;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_DAC_CONFIG, dac_config);
@@ -1982,7 +1982,7 @@ static ssize_t adt7316_set_int_enabled(struct device *dev,
 	int ret;
 
 	config1 = chip->config1 & (~ADT7316_INT_EN);
-	if (!memcmp(buf, "1", 1))
+	if (buf[0] == '1')
 		config1 |= ADT7316_INT_EN;
 
 	ret = chip->bus.write(chip->bus.client, ADT7316_CONFIG1, config1);
--

To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

author
#3 lore raw
Quoted 2 lines

I think it is a good idea to switch directly to strtobool. But anyway, if you don't want to respin the patch it is fine as it is.

I didn't know that strtobool() existed ... but now that I do I agree that it would be better to use it here. But ... I'm less comfortable updating the patch to use it. User visible behavior would change (currently just "1" is considered "true", but strtobool would also accept "y" and "Y"). I'd also have to think hard about what to do if strtobool() said the input was not a valid boolean.

Thanks for the review.

-Tony ���{.n�+�������+%�����ݶ��w��{.n�+����{��G�����{ay�ʇڙ�,j��f���h��������z_�(�階�ݢj"���m������G������?����&���~��iO��z��v�^�m���� ������?�I�

maintainer
#4 lore raw
Quoted 11 lines · Tony
Quoted 2 lines

I think it is a good idea to switch directly to strtobool. But anyway, if you don't want to respin the patch it is fine as it is.

I didn't know that strtobool() existed ... but now that I do I agree that it would be better to use it here. But ... I'm less comfortable updating the patch to use it. User visible behavior would change (currently just "1" is considered "true", but strtobool would also accept "y" and "Y"). I'd also have to think hard about what to do if strtobool() said the input was not a valid boolean.

Thanks for the review.

-Tony

I'll take the patch as is. If anyone wants to do the strtobool conversion as a follow up that would be great as well. As a staging driver which doesn't terribly closely correspond to any standard abi's I'd be inclined to not worry to much about breaking userspace code that relies on the exact comparison currently used as long as the obvious case still works.

Patch applied to togreg branch of
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git

Thanks,

Jonathan