Skip to contentSkip to conversation

m68k build regression

DISCUSSION Bityutskiy, Artem 4 participants 6 messages Apr 5, 2013 – Apr 8, 2013 m68k architecture

lore
Share & tools
lore
#0 lore raw

Hi,

starting from 3.9-rc1 one of my m68k configurations does not build, which is a regression. The configuration is attached. I build with W=1. I did not look at the details, just shooting a bug report.

drivers/gpio/devres.c: In function 'devm_gpio_request_one':
drivers/gpio/devres.c:90:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[3]: *** [drivers/gpio/devres.o] Error 1

Thanks!

Signature · 12 lines
Best Regards,
Artem Bityutskiy
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki 
Business Identity Code: 0357606 - 4 
Domiciled in Helsinki 

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.
#1 lore raw
Quoted 8 lines · Artem

starting from 3.9-rc1 one of my m68k configurations does not build, which is a regression. The configuration is attached. I build with W=1. I did not look at the details, just shooting a bug report.

drivers/gpio/devres.c: In function 'devm_gpio_request_one':
drivers/gpio/devres.c:90:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[3]: *** [drivers/gpio/devres.o] Error 1

Somehow GPIO_DEVRES get selected,
m68k is using GENERIC_GPIO but not GPIOLIB, so devres.c include <linux/gpio.h> which includes <asm/gpio.h> as the arch has CONFIG_ARCH_HAVE_CUSTOM_GPIO_H.

So to use the devres facility arch/m68k/include/asm/gpio.h needs to provide gpio_request_one().

Which it doesn't and thus fails.

Did some driver you're using start to use
devm_gpio_request_one() recently?

I vaguely remember Alexandre looking into things like this so adding him...

Yours,
Linus Walleij

#2 lore raw
Quoted 20 lines · Linus Walleij
Quoted 8 lines · Artem

starting from 3.9-rc1 one of my m68k configurations does not build, which is a regression. The configuration is attached. I build with W=1. I did not look at the details, just shooting a bug report.

drivers/gpio/devres.c: In function 'devm_gpio_request_one':
drivers/gpio/devres.c:90:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[3]: *** [drivers/gpio/devres.o] Error 1

Somehow GPIO_DEVRES get selected,
m68k is using GENERIC_GPIO but not GPIOLIB, so devres.c include <linux/gpio.h> which includes <asm/gpio.h> as the arch has CONFIG_ARCH_HAVE_CUSTOM_GPIO_H.

So to use the devres facility arch/m68k/include/asm/gpio.h needs to provide gpio_request_one().

Quoted 7 lines

Which it doesn't and thus fails.

Did some driver you're using start to use
devm_gpio_request_one() recently?

I vaguely remember Alexandre looking into things like this so adding him...

I know OpenRisc had an issue with devres.c (CC Jonas), please look at commit d4cb776f for the fix. I don't think my changes for 3.9 are responsible for this, they only deal with gpiolib's internals and not with header files, so they should be noop for platforms only using GENERIC_GPIO.

I'd recommend doing the same as OpenRisc (turning GENERIC_GPIO and ARCH_WANT_OPTIONAL_GPIOLIB into ARCH_REQUIRE_GPIOLIB), anyway GENERIC_GPIO is being removed for 3.10, so you better get used to using gpiolib from now on. :)

Alex.

-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------

#3 lore raw
Quoted 26 lines · Alex Courbot
Quoted 25 lines · Linus Walleij
Quoted 8 lines · Artem

starting from 3.9-rc1 one of my m68k configurations does not build, which is a regression. The configuration is attached. I build with W=1. I did not look at the details, just shooting a bug report.

drivers/gpio/devres.c: In function 'devm_gpio_request_one':
drivers/gpio/devres.c:90:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[3]: *** [drivers/gpio/devres.o] Error 1

Somehow GPIO_DEVRES get selected,
m68k is using GENERIC_GPIO but not GPIOLIB, so devres.c include <linux/gpio.h> which includes <asm/gpio.h> as the arch has CONFIG_ARCH_HAVE_CUSTOM_GPIO_H.

So to use the devres facility arch/m68k/include/asm/gpio.h needs to provide gpio_request_one().

Which it doesn't and thus fails.

Did some driver you're using start to use
devm_gpio_request_one() recently?

Quoted 6 lines
Quoted 2 lines

I vaguely remember Alexandre looking into things like this so adding him...

I know OpenRisc had an issue with devres.c (CC Jonas), please look at commit d4cb776f for the fix. I don't think my changes for 3.9 are responsible for this, they only deal with gpiolib's internals and not with header files, so they should be noop for platforms only using GENERIC_GPIO.

I'd recommend doing the same as OpenRisc (turning GENERIC_GPIO and ARCH_WANT_OPTIONAL_GPIOLIB into ARCH_REQUIRE_GPIOLIB), anyway GENERIC_GPIO is being removed for 3.10, so you better get used to using gpiolib from now on. :)

Or we could fix like this, keeping the existing local functions intact for this one last kernel version.

Regards
Greg

[PATCH] m68k: define a local gpio_request_one() function

Compiling for linux-3.9-rc1 and later fails with:

drivers/gpio/devres.c: In function 'devm_gpio_request_one':
drivers/gpio/devres.c:90:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration]

So provide a local gpio_request_one() function. Code largely borrowed from blackfin's local gpio_request_one() function.

---
 arch/m68k/include/asm/gpio.h | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
arch/m68k/include/asm/gpio.h +20 -0
index 4395ffc..8cc8343 100644
@@ -86,4 +86,24 @@ static inline int gpio_cansleep(unsigned gpio)
 	return gpio < MCFGPIO_PIN_MAX ? 0 : __gpio_cansleep(gpio);
 }
 
+static inline int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
+{
+	int err;
+
+	err = gpio_request(gpio, label);
+	if (err)
+		return err;
+
+	if (flags & GPIOF_DIR_IN)
+		err = gpio_direction_input(gpio);
+	else
+		err = gpio_direction_output(gpio,
+			(flags & GPIOF_INIT_HIGH) ? 1 : 0);
+
+	if (err)
+		gpio_free(gpio);
+
+	return err;
+}
+
 #endif
Acked-by
#4 lore raw
Quoted 11 lines · Greg Ungerer

Or we could fix like this, keeping the existing local functions intact for this one last kernel version.

Regards
Greg

[PATCH] m68k: define a local gpio_request_one() function

Compiling for linux-3.9-rc1 and later fails with:

Quoted 7 lines

drivers/gpio/devres.c: In function 'devm_gpio_request_one':
drivers/gpio/devres.c:90:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration]

So provide a local gpio_request_one() function. Code largely borrowed from blackfin's local gpio_request_one() function.

Greg, are you pushing this patch then?

Yours,
Linus Walleij

#5 lore raw

Hi Linus,

Quoted 16 lines · Linus Walleij
Quoted 14 lines · Greg Ungerer

Or we could fix like this, keeping the existing local functions intact for this one last kernel version.

Regards
Greg

[PATCH] m68k: define a local gpio_request_one() function

Compiling for linux-3.9-rc1 and later fails with:

drivers/gpio/devres.c: In function 'devm_gpio_request_one':
drivers/gpio/devres.c:90:2: error: implicit declaration of function 'gpio_request_one' [-Werror=implicit-function-declaration]

Quoted 8 lines
Quoted 4 lines

So provide a local gpio_request_one() function. Code largely borrowed from blackfin's local gpio_request_one() function.

Greg, are you pushing this patch then?

I am happy to push to Linus if everyone is happy with that.

Regards
Greg