Skip to contentSkip to conversation

Remove SH2 and SH3 support

PATCH New Thomas Petazzoni 4 participants 8 messages Apr 7, 2013 – Apr 11, 2013 Journalling flash file system V2 (JFFS2)

lore
Share & tools
lore
#0 lore raw

cover Remove SH2 and SH3 support

Hello,

Here is a set of two patches that remove support for SH2 and SH3. The retionale for the removal is part of the commit log of the second patch. The first patch is only a preliminary cleanup, it can be committed regardless of the decision for the second patch.

I've already removed the SH2 toolchain configuration from my autobuilders.

Thanks.

Thomas Petazzoni (2):
fs/jffs2: refactor endianess selection to use BR2_ENDIAN
arch: remove support for SuperH 2 and SuperH 3

 arch/Config.in.sh                        |   18 ++------------
 fs/jffs2/Config.in                       |    5 +---
 package/flashbench/flashbench.mk         |    4 +--
 package/kexec/Config.in                  |    2 +-
 package/multimedia/mplayer/Config.in     |    3 +--
 toolchain/toolchain-external/Config.in   |   40 ------------------------------
 toolchain/toolchain-external/ext-tool.mk |    6 -----
 toolchain/uClibc/uclibc.mk               |   20 ---------------
 8 files changed, 7 insertions(+), 91 deletions(-)
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/2 fs/jffs2: refactor endianess selection to use BR2_ENDIAN

Instead of explicitly listing the sub-architectures or architectures that are big-endian, use BR2_ENDIAN directly.

---
 fs/jffs2/Config.in |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
fs/jffs2/Config.in +1 -4
index 9a96d7d..f15e730 100644
@@ -92,10 +92,7 @@ config BR2_TARGET_ROOTFS_JFFS2_PADSIZE
 
 choice
 	prompt "Endianess"
-	default BR2_TARGET_ROOTFS_JFFS2_BE if BR2_armeb || \
-			BR2_avr32 || BR2_m68k || BR2_mips || \
-			BR2_powerpc || BR2_sh2 || BR2_sh2a || \
-			BR2_sh3eb || BR2_sh4eb || BR2_sh4aeb || BR2_sparc
+	default BR2_TARGET_ROOTFS_JFFS2_BE if BR2_ENDIAN = "BIG"
 
 config BR2_TARGET_ROOTFS_JFFS2_LE
 	bool "little-endian"
Signature · 1 line
1.7.9.5
#2 lore raw

PATCH 1/2 fs/jffs2: refactor endianess selection to use BR2_ENDIAN

Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line

"Thomas" == Thomas Petazzoni <[email protected]> writes:

Thomas> Instead of explicitly listing the sub-architectures or architectures Thomas> that are big-endian, use BR2_ENDIAN directly.

Committed, thanks.

Signature · 1 line
Bye, Peter Korsgaard
#3 lore raw

PATCH 2/2 arch: remove support for SuperH 2 and SuperH 3

In reply to Thomas Petazzoni

The SuperH 2 architecture is a noMMU architecture from Renesas, and its Linux support is really poor. A number of packages fail to build, the kernel support is almost inexistant, we have never heard of any user of it.

I was originally the one who introduced support for SuperH 2, but the project switched to a different architecture due to the poor Linux support for SuperH 2.

Regarding SuperH 3, I've never heard of Linux support for it that is used in practice.

---
 arch/Config.in.sh                        |   18 ++------------
 package/flashbench/flashbench.mk         |    4 +--
 package/kexec/Config.in                  |    2 +-
 package/multimedia/mplayer/Config.in     |    3 +--
 toolchain/toolchain-external/Config.in   |   40 ------------------------------
 toolchain/toolchain-external/ext-tool.mk |    6 -----
 toolchain/uClibc/uclibc.mk               |   20 ---------------
 7 files changed, 6 insertions(+), 87 deletions(-)
arch/Config.in.sh +2 -16
index cf70fd5..c919e56 100644
@@ -5,14 +5,6 @@ choice
 	help
 	  Specific CPU variant to use
 
-config BR2_sh2
-	bool "sh2 (SH2 big endian)"
-config BR2_sh2a
-	bool "sh2a (SH2A big endian)"
-config BR2_sh3
-	bool "sh3 (SH3 little endian)"
-config BR2_sh3eb
-	bool "sh3eb (SH3 big endian)"
 config BR2_sh4
 	bool "sh4 (SH4 little endian)"
 config BR2_sh4eb
@@ -24,10 +16,6 @@ config BR2_sh4aeb
 endchoice
 
 config BR2_ARCH
-	default "sh2"		if BR2_sh2
-	default "sh2a"		if BR2_sh2a
-	default "sh3"		if BR2_sh3
-	default "sh3eb"		if BR2_sh3eb
 	default "sh4"		if BR2_sh4
 	default "sh4eb"		if BR2_sh4eb
 	default "sh4a"		if BR2_sh4a
@@ -35,7 +23,5 @@ config BR2_ARCH
 	default "sh64"		if BR2_sh64
 
 config BR2_ENDIAN
-	default "LITTLE"	if BR2_sh3 || BR2_sh4 || BR2_sh4a || \
-				   BR2_x86_64 || BR2_sh64
-	default "BIG"		if BR2_sh2 || BR2_sh2a || BR2_sh3eb || \
-				   BR2_sh4eb || BR2_sh4aeb
+	default "LITTLE"	if BR2_sh4 || BR2_sh4a || BR2_sh64
+	default "BIG"		if BR2_sh4eb || BR2_sh4aeb
package/flashbench/flashbench.mk +2 -2
index 45d0540..4ea8f5d 100644
@@ -11,8 +11,8 @@ FLASHBENCH_LICENSE_FILES = COPYING
 
 FLASHBENCH_CFLAGS = $(TARGET_CFLAGS)
 
-ifeq ($(BR2_microblaze)$(BR2_sh2a),y)
-# microblaze and sh2a toolchains only provide LLONG_MAX when used with gnu99 dialect
+ifeq ($(BR2_microblaze),y)
+# microblaze toolchains only provide LLONG_MAX when used with gnu99 dialect
 FLASHBENCH_CFLAGS += -std=gnu99
 endif
 
package/kexec/Config.in +1 -1
index 886144f..d82aa11 100644
@@ -2,7 +2,7 @@ config BR2_PACKAGE_KEXEC
 	bool "kexec"
 	depends on BR2_i386 || BR2_x86_64 || BR2_arm || BR2_armeb || \
 		BR2_mips || BR2_mips64 || BR2_mipsel || BR2_mips64el || \
-		BR2_powerpc || BR2_sh4 || BR2_sh4a || BR2_sh3
+		BR2_powerpc || BR2_sh4 || BR2_sh4a
 	help
 	  Kexec is a user space utiltity for loading another kernel
 	  and asking the currently running kernel to do something with it.
package/multimedia/mplayer/Config.in +1 -2
index e36fc46..35a1d04 100644
@@ -1,8 +1,7 @@
 config BR2_PACKAGE_MPLAYER
 	bool "mplayer"
 	# Those architectures are not supported by MPlayer
-	depends on !(BR2_sh2 || BR2_sh2a || BR2_sh4a || BR2_sh4aeb \
-			|| BR2_microblaze || BR2_aarch64)
+	depends on !(BR2_sh4a || BR2_sh4aeb || BR2_microblaze || BR2_aarch64)
 	depends on BR2_LARGEFILE
 	help
 	  MPlayer is a movie player which runs on many systems and supports
toolchain/toolchain-external/Config.in +0 -40
index d2f3926..282c2c8 100644
@@ -471,44 +471,6 @@ config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
 	    - SH4A, uClibc, big endian
 	      Not usable in Buildroot yet.
 
-config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
-	bool "Sourcery CodeBench SH 2011.03"
-	depends on BR2_sh2a
-	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
-	select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
-	select BR2_LARGEFILE
-	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
-	select BR2_USE_WCHAR
-	select BR2_TOOLCHAIN_HAS_THREADS
-	select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
-	select BR2_INSTALL_LIBSTDCPP
-	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	help
-	  Sourcery CodeBench toolchain for the SuperH architecture,
-	  from Mentor Graphics. It uses gcc 4.5.2, binutils 2.20,
-	  uClibc 0.9.30, gdb 7.2.50 and kernel headers 2.6.38. It has
-	  support for the following variants:
-	    - SH2A, uClibc, big endian
-
-config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
-	bool "Sourcery CodeBench SH 2010.09"
-	depends on BR2_sh2a
-	depends on BR2_HOSTARCH = "x86_64" || BR2_HOSTARCH = "x86"
-	select BR2_TOOLCHAIN_EXTERNAL_UCLIBC
-	select BR2_LARGEFILE
-	select BR2_TOOLCHAIN_HAS_NATIVE_RPC
-	select BR2_USE_WCHAR
-	select BR2_TOOLCHAIN_HAS_THREADS
-	select BR2_TOOLCHAIN_HAS_THREADS_DEBUG
-	select BR2_INSTALL_LIBSTDCPP
-	select BR2_HOSTARCH_NEEDS_IA32_LIBS
-	help
-	  Sourcery CodeBench toolchain for the SuperH architecture,
-	  from Mentor Graphics. It uses gcc 4.5.1, binutils 2.20,
-	  uClibc 0.9.30, gdb 7.2.50 and kernel headers 2.6.35.2. It
-	  has support for the following variants:
-	    - SH2A, uClibc, big endian
-
 config BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209
 	bool "Sourcery CodeBench x86/x86_64 2012.09"
 	depends on BR2_i386 || BR2_x86_64
@@ -779,8 +741,6 @@ config BR2_TOOLCHAIN_EXTERNAL_PREFIX
 	default "sh-linux-gnu"           if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201103
 	default "sh-linux-gnu"           if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201203
 	default "sh-linux-gnu"           if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209
-	default "sh-uclinux"             if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009
-	default "sh-uclinux"             if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103
 	default "i686-pc-linux-gnu"	 if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109
 	default "i686-pc-linux-gnu"	 if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201203
 	default "i686-pc-linux-gnu"	 if BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201209
toolchain/toolchain-external/ext-tool.mk +0 -6
index 5f467b7..e38ec3e 100644
@@ -225,12 +225,6 @@ TOOLCHAIN_EXTERNAL_SOURCE=renesas-2012.03-35-sh-linux-gnu-i686-pc-linux-gnu.tar.
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH201209),y)
 TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/public/gnu_toolchain/sh-linux-gnu/
 TOOLCHAIN_EXTERNAL_SOURCE=renesas-2012.09-61-sh-linux-gnu-i686-pc-linux-gnu.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201009),y)
-TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/sh-uclinux/
-TOOLCHAIN_EXTERNAL_SOURCE=renesas-2010.09-60-sh-uclinux-i686-pc-linux-gnu.tar.bz2
-else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH2A_201103),y)
-TOOLCHAIN_EXTERNAL_SITE=http://sourcery.mentor.com/public/gnu_toolchain/sh-uclinux/
-TOOLCHAIN_EXTERNAL_SOURCE=renesas-2011.03-36-sh-uclinux-i686-pc-linux-gnu.tar.bz2
 else ifeq ($(BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_X86_201109),y)
 TOOLCHAIN_EXTERNAL_SITE=https://sourcery.mentor.com/public/gnu_toolchain/i686-pc-linux-gnu/
 TOOLCHAIN_EXTERNAL_SOURCE=ia32-2011.09-24-i686-pc-linux-gnu-i386-linux.tar.bz2
toolchain/uClibc/uclibc.mk +0 -20
index e8b2bb4..8553451 100644
@@ -181,26 +181,6 @@ ifeq ($(UCLIBC_TARGET_ARCH),sh)
 	/bin/echo "# CONFIG_SH2 is not set" >> $(UCLIBC_DIR)/.oldconfig
 	/bin/echo "# CONFIG_SH3 is not set" >> $(UCLIBC_DIR)/.oldconfig
 	/bin/echo "# CONFIG_SH4 is not set" >> $(UCLIBC_DIR)/.oldconfig
-ifeq ($(BR2_sh2a),y)
-	$(SED) 's,# CONFIG_SH2A is not set,CONFIG_SH2A=y,g' $(UCLIBC_DIR)/.oldconfig
-	/bin/echo "# UCLIBC_FORMAT_FDPIC_ELF is not set" >> $(UCLIBC_DIR)/.oldconfig
-	/bin/echo "# UCLIBC_FORMAT_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig
-	/bin/echo "# UCLIBC_FORMAT_FLAT_SEP_DATA is not set" >> $(UCLIBC_DIR)/.oldconfig
-	/bin/echo "# UCLIBC_FORMAT_SHARED_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig
-endif
-ifeq ($(BR2_sh2),y)
-	$(SED) 's,# CONFIG_SH2 is not set,CONFIG_SH2=y,g' $(UCLIBC_DIR)/.oldconfig
-	/bin/echo "# UCLIBC_FORMAT_FDPIC_ELF is not set" >> $(UCLIBC_DIR)/.oldconfig
-	/bin/echo "# UCLIBC_FORMAT_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig
-	/bin/echo "# UCLIBC_FORMAT_FLAT_SEP_DATA is not set" >> $(UCLIBC_DIR)/.oldconfig
-	/bin/echo "# UCLIBC_FORMAT_SHARED_FLAT is not set" >> $(UCLIBC_DIR)/.oldconfig
-endif
-ifeq ($(BR2_sh3eb),y)
-	$(SED) 's,# CONFIG_SH3 is not set,CONFIG_SH3=y,g' $(UCLIBC_DIR)/.oldconfig
-endif
-ifeq ($(BR2_sh3),y)
-	$(SED) 's,# CONFIG_SH3 is not set,CONFIG_SH3=y,g' $(UCLIBC_DIR)/.oldconfig
-endif
 ifeq ($(BR2_sh4eb),y)
 	$(SED) 's,# CONFIG_SH4 is not set,CONFIG_SH4=y,g' $(UCLIBC_DIR)/.oldconfig
 endif
Signature · 1 line
1.7.9.5
#4 lore raw

PATCH 2/2 arch: remove support for SuperH 2 and SuperH 3

Quoted 13 lines · Thomas Petazzoni

The SuperH 2 architecture is a noMMU architecture from Renesas, and its Linux support is really poor. A number of packages fail to build, the kernel support is almost inexistant, we have never heard of any user of it.

I was originally the one who introduced support for SuperH 2, but the project switched to a different architecture due to the poor Linux support for SuperH 2.

Regarding SuperH 3, I've never heard of Linux support for it that is used in practice.

Quoted 9 lines
---
  arch/Config.in.sh                        |   18 ++------------
  package/flashbench/flashbench.mk         |    4 +--
  package/kexec/Config.in                  |    2 +-
  package/multimedia/mplayer/Config.in     |    3 +--
  toolchain/toolchain-external/Config.in   |   40 ------------------------------
  toolchain/toolchain-external/ext-tool.mk |    6 -----
  toolchain/uClibc/uclibc.mk               |   20 ---------------
  7 files changed, 6 insertions(+), 87 deletions(-)

git grep 'sh[23]' tells me:

- some comments in qemu.mk can be removed;
- package/binutils/binutils-*/120-sh-conf.patch can probably be removed (I think the target name is always sh-x-y for sh4).

Regards,
Arnout

Signature · 6 lines
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
#5 lore raw

PATCH 2/2 arch: remove support for SuperH 2 and SuperH 3

In reply to Thomas Petazzoni

Hi Thomas,

Quoted 8 lines

The SuperH 2 architecture is a noMMU architecture from Renesas, and its Linux support is really poor. A number of packages fail to build, the kernel support is almost inexistant, we have never heard of any user of it.

I was originally the one who introduced support for SuperH 2, but the project switched to a different architecture due to the poor Linux support for SuperH 2.

Actually, there are a couple of sh2a devices that are supported in the upstream Linux kernel, the sh7264 and sh7269 devices. Though they lack a number of upstream drivers, the basics are there, and there are a number of out-of-tree drivers. I also know of a number of customers using these devices with Buildroot, mostly in Japan.

The main reason that most packages fail to build is the noMMU architecture. That, of course, is a problem. However, I have found that it is useful to use Buildroot to build the busybox and a few packages at least. One of the main reasons for using Buildroot is that it is the one of the few tools that can build for noMMU devices.

Quoted 2 lines

Regarding SuperH 3, I've never heard of Linux support for it that is used in practice.

Regarding the other Renesas families that are removed by this patch, I would agree that there are any users.

So, can we keep sh2a?

Regards
Phil

#6 lore raw

PATCH 2/2 arch: remove support for SuperH 2 and SuperH 3

Hello,

Quoted 1 line · phil.edworthy at renesas.com

So, can we keep sh2a?

Ok, sure. I'll change the patch to remove only SH3. I'll try to contact you separately whenever we have SH2 related build issues, when they are not stricly noMMU related.

I presume you actually have real hardware to test the systems generated by Buildroot?

Thanks for your feedback!

Thomas

Signature · 4 lines
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
#7 lore raw

PATCH 2/2 arch: remove support for SuperH 2 and SuperH 3

Hi Thomas,

Quoted 5 lines
Quoted 1 line

So, can we keep sh2a?

Ok, sure. I'll change the patch to remove only SH3. I'll try to contact you separately whenever we have SH2 related build issues, when they are not stricly noMMU related.

Ok, thanks!

Quoted 2 lines

I presume you actually have real hardware to test the systems generated by Buildroot?

Yes, I have a sh7264 and sh7269 board I can use.

Thanks
Phil