rtcan/peak_pci: add further device ids to the PCI device, table
PATCH 1/1 rtcan/peak_pci: add further device ids to the PCI device, table
Add support for further PEAK CAN PCI cards. We have confirmation that the miniPCIe card with the device id 8 works fine. But 4 channels cards are still not fully supported.
Signed-off-by Wolfgang Grandegger <[email protected]>
--- ksrc/drivers/can/sja1000/rtcan_peak_pci.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-)
ksrc/drivers/can/sja1000/rtcan_peak_pci.c +15 -5
@@ -70,16 +70,26 @@ struct rtcan_peak_pci#define PITA_GPIOICR 0x18 // general purpose IO interface control register#define PITA_MISC 0x1C // miscellanoes register -#define PEAK_PCI_VENDOR_ID 0x001C // the PCI device and vendor IDs -#define PEAK_PCI_DEVICE_ID 0x0001 // Device ID for PCI and older PCIe cards -#define PEAK_PCIE_DEVICE_ID 0x0003 // Device ID for newer PCIe cards (IPEH-003027) +#define PEAK_PCI_VENDOR_ID 0x001C // the PCI device and vendor IDs +#define PEAK_PCI_DEVICE_ID 0x0001 // Device ID for PCI and older PCIe cards +#define PEAK_PCIE_DEVICE_ID 0x0003 // Device ID for newer PCIe cards (IPEH-003027) +#define PEAK_CPCI_DEVICE_ID 0x0004 // for nextgen cPCI slot cards +#define PEAK_MPCI_DEVICE_ID 0x0005 // for nextgen miniPCI slot cards +#define PEAK_PC_104P_DEVICE_ID 0x0006 // PCAN-PC/104+ cards +#define PEAK_PCI_104E_DEVICE_ID 0x0007 // PCAN-PCI/104 Express cards +#define PEAK_MPCIE_DEVICE_ID 0x0008 // The miniPCIe slot cards#define PCI_CONFIG_PORT_SIZE 0x1000 // size of the config io-memory#define PCI_PORT_SIZE 0x0400 // size of a channel io-memorystatic struct pci_device_id peak_pci_tbl[] = { - {PEAK_PCI_VENDOR_ID ,PEAK_PCI_DEVICE_ID ,PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 ,0 }, - {PEAK_PCI_VENDOR_ID ,PEAK_PCIE_DEVICE_ID ,PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 ,0 }, + {PEAK_PCI_VENDOR_ID ,PEAK_PCI_DEVICE_ID ,PCI_ANY_ID ,PCI_ANY_ID ,}, + {PEAK_PCI_VENDOR_ID ,PEAK_PCIE_DEVICE_ID ,PCI_ANY_ID ,PCI_ANY_ID ,}, + {PEAK_PCI_VENDOR_ID ,PEAK_MPCI_DEVICE_ID ,PCI_ANY_ID ,PCI_ANY_ID ,}, + {PEAK_PCI_VENDOR_ID ,PEAK_MPCIE_DEVICE_ID ,PCI_ANY_ID ,PCI_ANY_ID ,}, + {PEAK_PCI_VENDOR_ID ,PEAK_PC_104P_DEVICE_ID ,PCI_ANY_ID ,PCI_ANY_ID ,}, + {PEAK_PCI_VENDOR_ID ,PEAK_PCI_104E_DEVICE_ID ,PCI_ANY_ID ,PCI_ANY_ID ,}, + {PEAK_PCI_VENDOR_ID ,PEAK_CPCI_DEVICE_ID ,PCI_ANY_ID ,PCI_ANY_ID ,}, { } };MODULE_DEVICE_TABLE (pci, peak_pci_tbl);
Signature · 1 line
1.7.9.5
Gilles Chanteperdrix
AppliedQuoted 5 lines · Wolfgang Grandegger
Add support for further PEAK CAN PCI cards. We have confirmation that the miniPCIe card with the device id 8 works fine. But 4 channels cards are still not fully supported.
Signed-off-by Wolfgang Grandegger <[email protected]>
Merged, thanks.
Signature · 1 line
Gilles.