Skip to contentSkip to conversation

ARM: at91: move to generic DMA device tree bindings

PATCH Superseded ludovic.desroches at atmel.com 4 participants 8 messages Apr 15, 2013 – Apr 16, 2013

Subsystems (7)

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

cover ARM: at91: move to generic DMA device tree bindings

From: Ludovic Desroches <[email protected]>

Hi,

This set of patches introduces DMA device tree bindings support for the atmel DMA controller and first driver conversions.

I'll send an update of dts file in the next version if there is no major issue with the bindings.

Regards

Ludovic Desroches (3):
at_hdmac: move to generic DMA binding
i2c: at91: convert to dma_request_slave_channel_compat()
mci: at91: convert to dma_request_slave_channel_compat()

 .../devicetree/bindings/dma/atmel-dma.txt          | 26 +++++-
 arch/arm/boot/dts/sama5d3.dtsi                     |  4 +-
 drivers/dma/at_hdmac.c                             | 93 ++++++++++++++++++++--
 drivers/dma/at_hdmac_regs.h                        |  4 +
 drivers/i2c/busses/i2c-at91.c                      | 49 ++++++------
 drivers/mmc/host/atmel-mci.c                       | 25 +++---
 6 files changed, 154 insertions(+), 47 deletions(-)
Signature · 1 line
1.7.11.3
#1 lore raw

PATCH 1/3 at_hdmac: move to generic DMA binding

From: Ludovic Desroches <[email protected]>

Update at_hdmac driver to support generic DMA device tree binding. Devices can still request channel with dma_request_channel() then it doesn't break DMA for non DT boards.

---
 .../devicetree/bindings/dma/atmel-dma.txt          | 26 +++++-
 arch/arm/boot/dts/sama5d3.dtsi                     |  4 +-
 drivers/dma/at_hdmac.c                             | 93 ++++++++++++++++++++--
 drivers/dma/at_hdmac_regs.h                        |  4 +
 4 files changed, 117 insertions(+), 10 deletions(-)
Documentation/devicetree/bindings/dma/atmel-dma.txt +24 -2
index 3c046ee..4179bd2 100644
@@ -4,11 +4,33 @@ Required properties:
 - compatible: Should be "atmel,<chip>-dma"
 - reg: Should contain DMA registers location and length
 - interrupts: Should contain DMA interrupt
+- #dma-cells: Must be <2>
 
-Examples:
+Example:
 
-dma at ffffec00 {
+dma0: dma at ffffec00 {
 	compatible = "atmel,at91sam9g45-dma";
 	reg = <0xffffec00 0x200>;
 	interrupts = <21>;
+	#dma-cells = <2>;
+};
+
+DMA clients connected to the Atmel DMA controller must use the format
+described in the dma.txt file, using a three-cell specifier for each channel.
+The three cells in order are:
+
+1. A phandle pointing to the DMA controller
+2. The memory interface (16 most significant bits), the peripheral interface
+(16 less significant bits)
+3. The peripheral identifier (can be different for tx and rx)
+
+Example:
+
+i2c0 at i2c@f8010000 {
+	compatible = "atmel,at91sam9x5-i2c";
+	reg = <0xf8010000 0x100>;
+	interrupts = <9 4 6>;
+	dmas = <&dma0 1 7>,
+	       <&dma0 1 8>;
+	dma-names = "tx", "rx"
 };
arch/arm/boot/dts/sama5d3.dtsi +2 -2
index 39b0458..95c00a3 100644
@@ -348,14 +348,14 @@
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe600 0x200>;
 				interrupts = <30 4 0>;
-				#dma-cells = <1>;
+				#dma-cells = <2>;
 			};
 
 			dma1: dma-controller at ffffe800 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe800 0x200>;
 				interrupts = <31 4 0>;
-				#dma-cells = <1>;
+				#dma-cells = <2>;
 			};
 
 			ramc0: ramc at ffffea00 {
drivers/dma/at_hdmac.c +87 -6

143 lines not on this page · raw message

drivers/dma/at_hdmac_regs.h +4 -0
index 0eb3c13..c604d26 100644
@@ -220,6 +220,8 @@ enum atc_status {
  * @device: parent device
  * @ch_regs: memory mapped register base
  * @mask: channel index in a mask
+ * @per_if: peripheral interface
+ * @mem_if: memory interface
  * @status: transmit status information from irq/prep* functions
  *                to tasklet (use atomic operations)
  * @tasklet: bottom half to finish transaction work
@@ -238,6 +240,8 @@ struct at_dma_chan {
 	struct at_dma		*device;
 	void __iomem		*ch_regs;
 	u8			mask;
+	u8			per_if;
+	u8			mem_if;
 	unsigned long		status;
 	struct tasklet_struct	tasklet;
 	u32			save_cfg;
Signature · 1 line
1.7.11.3
#2 lore raw

PATCH 1/3 at_hdmac: move to generic DMA binding

On 04/15/2013 02:16 PM, ludovic.desroches at atmel.com :

Quoted 7 lines

From: Ludovic Desroches <[email protected]>

Update at_hdmac driver to support generic DMA device tree binding. Devices can still request channel with dma_request_channel() then it doesn't break DMA for non DT boards.

Some minor comments but the overall is good: so, after adding a little more explanation to documentation:

Very nice and concise patch for adding such an important feature: kudos!

Quoted 3 lines
---
 .../devicetree/bindings/dma/atmel-dma.txt          | 26 +++++-
 arch/arm/boot/dts/sama5d3.dtsi                     |  4 +-

Maybe we can have a separate patch for .dtsi modifications.

Documentation/devicetree/bindings/dma/atmel-dma.txt Required properties: · line 7

Quoted 13 lines
 drivers/dma/at_hdmac.c                             | 93 ++++++++++++++++++++--
 drivers/dma/at_hdmac_regs.h                        |  4 +
 4 files changed, 117 insertions(+), 10 deletions(-)
Documentation/devicetree/bindings/dma/atmel-dma.txt +1 -0
index 3c046ee..4179bd2 100644
@@ -4,11 +4,33 @@ Required properties:
 - compatible: Should be "atmel,<chip>-dma"
 - reg: Should contain DMA registers location and length
 - interrupts: Should contain DMA interrupt
+- #dma-cells: Must be <2>

Maybe add some explanation (taken from pl330): "used to represent the number of integer cells in the dmas property of client device."

Documentation/devicetree/bindings/dma/atmel-dma.txt Required properties:

Quoted 13 lines
Documentation/devicetree/bindings/dma/atmel-dma.txt +7 -2
-Examples:
+Example:
 
-dma at ffffec00 {
+dma0: dma at ffffec00 {
 	compatible = "atmel,at91sam9g45-dma";
 	reg = <0xffffec00 0x200>;
 	interrupts = <21>;
+	#dma-cells = <2>;
+};
+
+DMA clients connected to the Atmel DMA controller must use the format
+described in the dma.txt file, using a three-cell specifier for each channel

(to establish the link with the #dma-cells property:)
"
using a three-cell specifier for each channel: a phandle plus two integer cells.
"

Documentation/devicetree/bindings/dma/atmel-dma.txt Required properties: · line 25

Quoted 6 lines
Documentation/devicetree/bindings/dma/atmel-dma.txt +6 -0
+The three cells in order are:
+
+1. A phandle pointing to the DMA controller
+2. The memory interface (16 most significant bits), the peripheral interface
+(16 less significant bits)
+3. The peripheral identifier (can be different for tx and rx)

Yes but the peripheral identifier needs more explanation: what about:
"
Peripheral identifier for the hardware handshaking interface. The identifier can be different for tx and rx.
"

arch/arm/boot/dts/sama5d3.dtsi

Quoted 15 lines
Documentation/devicetree/bindings/dma/atmel-dma.txt +10 -0
+
+Example:
+
+i2c0 at i2c@f8010000 {
+	compatible = "atmel,at91sam9x5-i2c";
+	reg = <0xf8010000 0x100>;
+	interrupts = <9 4 6>;
+	dmas = <&dma0 1 7>,
+	       <&dma0 1 8>;
+	dma-names = "tx", "rx"
 };
arch/arm/boot/dts/sama5d3.dtsi +0 -0
index 39b0458..95c00a3 100644

Ditto.

Quoted 195 lines
arch/arm/boot/dts/sama5d3.dtsi +2 -2
@@ -348,14 +348,14 @@
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe600 0x200>;
 				interrupts = <30 4 0>;
-				#dma-cells = <1>;
+				#dma-cells = <2>;
 			};
 
 			dma1: dma-controller at ffffe800 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffe800 0x200>;
 				interrupts = <31 4 0>;
-				#dma-cells = <1>;
+				#dma-cells = <2>;
 			};
 
 			ramc0: ramc at ffffea00 {
drivers/dma/at_hdmac.c +87 -6
index 8415467..d5f7a1b 100644
@@ -24,6 +24,7 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_dma.h>
 
 #include "at_hdmac_regs.h"
 #include "dmaengine.h"
@@ -676,7 +677,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		ctrlb |=  ATC_DST_ADDR_MODE_FIXED
 			| ATC_SRC_ADDR_MODE_INCR
 			| ATC_FC_MEM2PER
-			| ATC_SIF(AT_DMA_MEM_IF) | ATC_DIF(AT_DMA_PER_IF);
+			| ATC_SIF(atchan->mem_if) | ATC_DIF(atchan->per_if);
 		reg = sconfig->dst_addr;
 		for_each_sg(sgl, sg, sg_len, i) {
 			struct at_desc	*desc;
@@ -715,7 +716,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
 		ctrlb |=  ATC_DST_ADDR_MODE_INCR
 			| ATC_SRC_ADDR_MODE_FIXED
 			| ATC_FC_PER2MEM
-			| ATC_SIF(AT_DMA_PER_IF) | ATC_DIF(AT_DMA_MEM_IF);
+			| ATC_SIF(atchan->per_if) | ATC_DIF(atchan->mem_if);
 
 		reg = sconfig->src_addr;
 		for_each_sg(sgl, sg, sg_len, i) {
@@ -821,8 +822,8 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
 		desc->lli.ctrlb = ATC_DST_ADDR_MODE_FIXED
 				| ATC_SRC_ADDR_MODE_INCR
 				| ATC_FC_MEM2PER
-				| ATC_SIF(AT_DMA_MEM_IF)
-				| ATC_DIF(AT_DMA_PER_IF);
+				| ATC_SIF(atchan->mem_if)
+				| ATC_DIF(atchan->per_if);
 		break;
 
 	case DMA_DEV_TO_MEM:
@@ -832,8 +833,8 @@ atc_dma_cyclic_fill_desc(struct dma_chan *chan, struct at_desc *desc,
 		desc->lli.ctrlb = ATC_DST_ADDR_MODE_INCR
 				| ATC_SRC_ADDR_MODE_FIXED
 				| ATC_FC_PER2MEM
-				| ATC_SIF(AT_DMA_PER_IF)
-				| ATC_DIF(AT_DMA_MEM_IF);
+				| ATC_SIF(atchan->per_if)
+				| ATC_DIF(atchan->mem_if);
 		break;
 
 	default:
@@ -1189,6 +1190,67 @@ static void atc_free_chan_resources(struct dma_chan *chan)
 	dev_vdbg(chan2dev(chan), "free_chan_resources: done\n");
 }
 
+static bool at_dma_filter(struct dma_chan *chan, void *slave)
+{
+	struct at_dma_slave *atslave = slave;
+
+	if (atslave->dma_dev == chan->device->dev) {
+		chan->private = atslave;
+		return true;
+	} else {
+		return false;
+	}
+}
+
+#ifdef CONFIG_OF
+static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
+				     struct of_dma *of_dma)
+{
+	struct dma_chan *chan;
+	struct at_dma_chan *atchan;
+	struct at_dma_slave *atslave;
+	dma_cap_mask_t mask;
+	unsigned int per_id;
+	struct platform_device *dmac_pdev;
+
+	if (dma_spec->args_count != 2)
+		return NULL;
+
+	dmac_pdev = of_find_device_by_node(dma_spec->np);
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	atslave = devm_kzalloc(&dmac_pdev->dev, sizeof(*atslave), GFP_KERNEL);
+	if (!atslave)
+		return NULL;
+	/*
+	 * We can fill both SRC_PER and DST_PER, one of these fields will be
+	 * ignored depending on DMA transfer direction.
+	 */
+	per_id = dma_spec->args[1];
+	atslave->cfg = ATC_FIFOCFG_HALFFIFO | ATC_DST_H2SEL_HW
+		      | ATC_SRC_H2SEL_HW | ATC_DST_PER(per_id)
+		      | ATC_SRC_PER(per_id);
+	atslave->dma_dev = &dmac_pdev->dev;
+
+	chan = dma_request_channel(mask, at_dma_filter, atslave);
+	if (!chan)
+		return NULL;
+
+	atchan = to_at_dma_chan(chan);
+	atchan->per_if = dma_spec->args[0] & 0xff;
+	atchan->mem_if = (dma_spec->args[0] >> 16) & 0xff;
+
+	return chan;
+}
+#else
+static struct dma_chan *at_dma_xlate(struct of_phandle_args *dma_spec,
+				     struct of_dma *of_dma)
+{
+	return NULL;
+}
+#endif
 
 /*--  Module Management  -----------------------------------------------*/
 
@@ -1343,6 +1405,8 @@ static int __init at_dma_probe(struct platform_device *pdev)
 	for (i = 0; i < plat_dat->nr_channels; i++) {
 		struct at_dma_chan	*atchan = &atdma->chan[i];
 
+		atchan->mem_if = AT_DMA_MEM_IF;
+		atchan->per_if = AT_DMA_PER_IF;
 		atchan->chan_common.device = &atdma->dma_common;
 		dma_cookie_init(&atchan->chan_common);
 		list_add_tail(&atchan->chan_common.device_node,
@@ -1389,8 +1453,25 @@ static int __init at_dma_probe(struct platform_device *pdev)
 
 	dma_async_device_register(&atdma->dma_common);
 
+	/*
+	 * Do not return an error if the dmac node is not present in order to
+	 * not break the existing way of requesting channel with
+	 * dma_request_channel().
+	 */
+	if (pdev->dev.of_node) {
+		err = of_dma_controller_register(pdev->dev.of_node,
+						 at_dma_xlate, atdma);
+		if (err) {
+			dev_err(&pdev->dev, "could not register of_dma_controller\n");
+			goto err_of_dma_controller_register;
+		}
+	}
+
 	return 0;
 
+err_of_dma_controller_register:
+	dma_async_device_unregister(&atdma->dma_common);
+	dma_pool_destroy(atdma->dma_desc_pool);
 err_pool_create:
 	platform_set_drvdata(pdev, NULL);
 	free_irq(platform_get_irq(pdev, 0), atdma);
drivers/dma/at_hdmac_regs.h +4 -0
index 0eb3c13..c604d26 100644
@@ -220,6 +220,8 @@ enum atc_status {
  * @device: parent device
  * @ch_regs: memory mapped register base
  * @mask: channel index in a mask
+ * @per_if: peripheral interface
+ * @mem_if: memory interface
  * @status: transmit status information from irq/prep* functions
  *                to tasklet (use atomic operations)
  * @tasklet: bottom half to finish transaction work
@@ -238,6 +240,8 @@ struct at_dma_chan {
 	struct at_dma		*device;
 	void __iomem		*ch_regs;
 	u8			mask;
+	u8			per_if;
+	u8			mem_if;
 	unsigned long		status;
 	struct tasklet_struct	tasklet;
 	u32			save_cfg;
Signature · 1 line
Nicolas Ferre
#3 lore raw

PATCH 2/3 i2c: at91: convert to dma_request_slave_channel_compat()

In reply to ludovic.desroches at atmel.com

From: Ludovic Desroches <[email protected]>

Use generic DMA DT helper. Platforms booting with or without DT populated are both supported.

---
 drivers/i2c/busses/i2c-at91.c | 49 ++++++++++++++++++++++---------------------
 1 file changed, 25 insertions(+), 24 deletions(-)
drivers/i2c/busses/i2c-at91.c +25 -24
index 75195e3..7ffd544 100644
@@ -607,11 +607,16 @@ MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
 #define atmel_twi_dt_ids NULL
 #endif
 
-static bool filter(struct dma_chan *chan, void *slave)
+static bool filter(struct dma_chan *chan, void *pdata)
 {
-	struct at_dma_slave *sl = slave;
+	struct at91_twi_pdata *sl_pdata = pdata;
+	struct at_dma_slave *sl;
 
-	if (sl->dma_dev == chan->device->dev) {
+	if (!sl_pdata)
+		return false;
+
+	sl = &sl_pdata->dma_slave;
+	if (sl && (sl->dma_dev == chan->device->dev)) {
 		chan->private = sl;
 		return true;
 	} else {
@@ -622,11 +627,10 @@ static bool filter(struct dma_chan *chan, void *slave)
 static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
 {
 	int ret = 0;
-	struct at_dma_slave *sdata;
+	struct at91_twi_pdata *pdata = dev->pdata;
 	struct dma_slave_config slave_config;
 	struct at91_twi_dma *dma = &dev->dma;
-
-	sdata = &dev->pdata->dma_slave;
+	dma_cap_mask_t mask;
 
 	memset(&slave_config, 0, sizeof(slave_config));
 	slave_config.src_addr = (dma_addr_t)phy_addr + AT91_TWI_RHR;
@@ -637,25 +641,22 @@ static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
 	slave_config.dst_maxburst = 1;
 	slave_config.device_fc = false;
 
-	if (sdata && sdata->dma_dev) {
-		dma_cap_mask_t mask;
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
 
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-		dma->chan_tx = dma_request_channel(mask, filter, sdata);
-		if (!dma->chan_tx) {
-			dev_err(dev->dev, "no DMA channel available for tx\n");
-			ret = -EBUSY;
-			goto error;
-		}
-		dma->chan_rx = dma_request_channel(mask, filter, sdata);
-		if (!dma->chan_rx) {
-			dev_err(dev->dev, "no DMA channel available for rx\n");
-			ret = -EBUSY;
-			goto error;
-		}
-	} else {
-		ret = -EINVAL;
+	dma->chan_tx = dma_request_slave_channel_compat(mask, filter, pdata,
+							dev->dev, "tx");
+	if (!dma->chan_tx) {
+		dev_err(dev->dev, "can't get a DMA channel for tx\n");
+		ret = -EBUSY;
+		goto error;
+	}
+
+	dma->chan_rx = dma_request_slave_channel_compat(mask, filter, pdata,
+							dev->dev, "rx");
+	if (!dma->chan_rx) {
+		dev_err(dev->dev, "can't get a DMA channel for rx\n");
+		ret = -EBUSY;
 		goto error;
 	}
 
Signature · 1 line
1.7.11.3
Applied
#4 lore raw

PATCH 2/3 i2c: at91: convert to dma_request_slave_channel_compat()

Quoted 6 lines · ludovic.desroches at atmel.com

From: Ludovic Desroches <[email protected]>

Use generic DMA DT helper. Platforms booting with or without DT populated are both supported.

Applied to for-next, thanks!

#5 lore raw

PATCH 3/3 mci: at91: convert to dma_request_slave_channel_compat()

In reply to ludovic.desroches at atmel.com

From: Ludovic Desroches <[email protected]>

Use generic DMA DT helper. Platforms booting with or without DT populated are both supported.

---
 drivers/mmc/host/atmel-mci.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)
drivers/mmc/host/atmel-mci.c +12 -13
index 10f8b73..73d5d24 100644
@@ -2224,10 +2224,15 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
 	mmc_free_host(slot->mmc);
 }
 
-static bool atmci_filter(struct dma_chan *chan, void *slave)
+static bool atmci_filter(struct dma_chan *chan, void *pdata)
 {
-	struct mci_dma_data	*sl = slave;
+	struct mci_platform_data *sl_pdata = pdata;
+	struct mci_dma_data *sl;
 
+	if (!sl_pdata)
+		return false;
+
+	sl = sl_pdata->dma_slave;
 	if (sl && find_slave_dev(sl) == chan->device->dev) {
 		chan->private = slave_data_ptr(sl);
 		return true;
@@ -2239,24 +2244,18 @@ static bool atmci_filter(struct dma_chan *chan, void *slave)
 static bool atmci_configure_dma(struct atmel_mci *host)
 {
 	struct mci_platform_data	*pdata;
+	dma_cap_mask_t mask;
 
 	if (host == NULL)
 		return false;
 
 	pdata = host->pdev->dev.platform_data;
 
-	if (!pdata)
-		return false;
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
 
-	if (pdata->dma_slave && find_slave_dev(pdata->dma_slave)) {
-		dma_cap_mask_t mask;
-
-		/* Try to grab a DMA channel */
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-		host->dma.chan =
-			dma_request_channel(mask, atmci_filter, pdata->dma_slave);
-	}
+	host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata,
+						   	  &host->pdev->dev, "rxtx");
 	if (!host->dma.chan) {
 		dev_warn(&host->pdev->dev, "no DMA channel available\n");
 		return false;
Signature · 1 line
1.7.11.3
#6 lore raw

PATCH 3/3 mci: at91: convert to dma_request_slave_channel_compat()

On 04/15/2013 02:16 PM, ludovic.desroches at atmel.com :

Quoted 6 lines

From: Ludovic Desroches <[email protected]>

Use generic DMA DT helper. Platforms booting with or without DT populated are both supported.

Quoted 57 lines
---
 drivers/mmc/host/atmel-mci.c | 25 ++++++++++++-------------
 1 file changed, 12 insertions(+), 13 deletions(-)
drivers/mmc/host/atmel-mci.c +12 -13
index 10f8b73..73d5d24 100644
@@ -2224,10 +2224,15 @@ static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot,
 	mmc_free_host(slot->mmc);
 }
 
-static bool atmci_filter(struct dma_chan *chan, void *slave)
+static bool atmci_filter(struct dma_chan *chan, void *pdata)
 {
-	struct mci_dma_data	*sl = slave;
+	struct mci_platform_data *sl_pdata = pdata;
+	struct mci_dma_data *sl;
 
+	if (!sl_pdata)
+		return false;
+
+	sl = sl_pdata->dma_slave;
 	if (sl && find_slave_dev(sl) == chan->device->dev) {
 		chan->private = slave_data_ptr(sl);
 		return true;
@@ -2239,24 +2244,18 @@ static bool atmci_filter(struct dma_chan *chan, void *slave)
 static bool atmci_configure_dma(struct atmel_mci *host)
 {
 	struct mci_platform_data	*pdata;
+	dma_cap_mask_t mask;
 
 	if (host == NULL)
 		return false;
 
 	pdata = host->pdev->dev.platform_data;
 
-	if (!pdata)
-		return false;
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
 
-	if (pdata->dma_slave && find_slave_dev(pdata->dma_slave)) {
-		dma_cap_mask_t mask;
-
-		/* Try to grab a DMA channel */
-		dma_cap_zero(mask);
-		dma_cap_set(DMA_SLAVE, mask);
-		host->dma.chan =
-			dma_request_channel(mask, atmci_filter, pdata->dma_slave);
-	}
+	host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata,
+						   	  &host->pdev->dev, "rxtx");
 	if (!host->dma.chan) {
 		dev_warn(&host->pdev->dev, "no DMA channel available\n");
 		return false;
Signature · 1 line
Nicolas Ferre
#7 lore raw

cover ARM: at91: move to generic DMA device tree bindings

In reply to ludovic.desroches at atmel.com
Quoted 9 lines · ludovic.desroches at atmel.com

From: Ludovic Desroches <[email protected]>

Hi,

This set of patches introduces DMA device tree bindings support for the atmel DMA controller and first driver conversions.

I'll send an update of dts file in the next version if there is no major issue with the bindings.

looks fine

Best Regards,
J.

Quoted 20 lines

Regards

Ludovic Desroches (3):
at_hdmac: move to generic DMA binding
i2c: at91: convert to dma_request_slave_channel_compat()
mci: at91: convert to dma_request_slave_channel_compat()

 .../devicetree/bindings/dma/atmel-dma.txt          | 26 +++++-
 arch/arm/boot/dts/sama5d3.dtsi                     |  4 +-
 drivers/dma/at_hdmac.c                             | 93 ++++++++++++++++++++--
 drivers/dma/at_hdmac_regs.h                        |  4 +
 drivers/i2c/busses/i2c-at91.c                      | 49 ++++++------
 drivers/mmc/host/atmel-mci.c                       | 25 +++---
 6 files changed, 154 insertions(+), 47 deletions(-)
Signature · 1 line
1.7.11.3