Skip to contentSkip to conversation

ARM: at91sam9260: dt: uart1 fix pinctrl typo

PATCH New Jean-Christophe PLAGNIOL-VILLARD 2 participants 2 messages Apr 16, 2013 – Apr 18, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ARM: at91sam9260: dt: uart1 fix pinctrl typo

it's bank B not C

---
 arch/arm/boot/dts/at91sam9260.dtsi |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/at91sam9260.dtsi +2 -2
index 367a604..6980ed1 100644
@@ -220,8 +220,8 @@
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<2 12 0x1 0x1	/* PB12 periph A with pullup */
-							 2 13 0x1 0x0>;	/* PB13 periph A */
+							<1 12 0x1 0x1	/* PB12 periph A with pullup */
+							 1 13 0x1 0x0>;	/* PB13 periph A */
 					};
 				};
 
Signature · 1 line
1.7.10.4
#1 lore raw

PATCH 1/1 ARM: at91sam9260: dt: uart1 fix pinctrl typo

On 04/16/2013 09:47 PM, Jean-Christophe PLAGNIOL-VILLARD :

Quoted 1 line

it's bank B not C

Already seen by Douglas Gilbert and queued for 3.10 in arm-soc/at91/dt3

Thanks anyway, bye.

Quoted 23 lines
---
 arch/arm/boot/dts/at91sam9260.dtsi |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
arch/arm/boot/dts/at91sam9260.dtsi +2 -2
index 367a604..6980ed1 100644
@@ -220,8 +220,8 @@
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<2 12 0x1 0x1	/* PB12 periph A with pullup */
-							 2 13 0x1 0x0>;	/* PB13 periph A */
+							<1 12 0x1 0x1	/* PB12 periph A with pullup */
+							 1 13 0x1 0x0>;	/* PB13 periph A */
 					};
 				};
 
Signature · 1 line
Nicolas Ferre