Skip to contentSkip to conversation

ath10k: killing things..

PATCH Superseded Bartosz Markowski 1 participant 4 messages Apr 24, 2013 Qualcomm Atheros ATH10K wireless driver

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover ath10k: killing things..

Bartosz Markowski (2):
ath10k: kill pci_write32_v1_workaround function
ath10k: kill TARGET_TYPE_AR9888

 drivers/net/wireless/ath/ath10k/bmi.h  |    8 +++----
 drivers/net/wireless/ath/ath10k/core.c |   28 +++++------------------
 drivers/net/wireless/ath/ath10k/core.h |   12 +++-------
 drivers/net/wireless/ath/ath10k/hw.h   |    2 --
 drivers/net/wireless/ath/ath10k/pci.c  |   21 ++++++------------
 drivers/net/wireless/ath/ath10k/pci.h  |   38 ++++++++++++++------------------
 6 files changed, 36 insertions(+), 73 deletions(-)
Signature · 1 line
1.7.10
#1 lore raw

PATCH 1/2 ath10k: kill pci_write32_v1_workaround function

---
 drivers/net/wireless/ath/ath10k/pci.h |   38 +++++++++++++++------------------
 1 file changed, 17 insertions(+), 21 deletions(-)
drivers/net/wireless/ath/ath10k/pci.h +17 -21
index e05a7e0..add59ea 100644
@@ -268,26 +268,6 @@ static inline void ath10k_pci_reg_write32(void __iomem *mem, u32 addr, u32 val)
 /* Wait up to this many Ms for a Diagnostic Access CE operation to complete */
 #define DIAG_ACCESS_CE_TIMEOUT_MS 10
 
-static inline void pci_write32_v1_workaround(struct ath10k *ar, u32 offset, u32 value)
-{
-	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
-	void __iomem *addr = ar_pci->mem;
-
-	if (ar_pci->hw_v1_workaround) {
-		unsigned long irq_flags;
-
-		spin_lock_irqsave(&ar_pci->hw_v1_workaround_lock, irq_flags);
-
-		ioread32(addr+offset+4); /* 3rd read prior to write */
-		ioread32(addr+offset+4); /* 2nd read prior to write */
-		ioread32(addr+offset+4); /* 1st read prior to write */
-		iowrite32(value, addr+offset);
-
-		spin_unlock_irqrestore(&ar_pci->hw_v1_workaround_lock, irq_flags);
-	} else
-		iowrite32(value, addr+offset);
-}
-
 /*
  * This API allows the Host to access Target registers directly
  * and relatively efficiently over PCIe.
@@ -318,7 +298,23 @@ static inline void pci_write32_v1_workaround(struct ath10k *ar, u32 offset, u32
  *   multiple code paths may issue BEGIN/END on a single targid.
  */
 static inline void ath10k_pci_write32(struct ath10k *ar, u32 offset, u32 value) {
-	pci_write32_v1_workaround(ar, offset, value);
+
+	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
+	void __iomem *addr = ar_pci->mem;
+
+	if (ar_pci->hw_v1_workaround) {
+		unsigned long irq_flags;
+
+		spin_lock_irqsave(&ar_pci->hw_v1_workaround_lock, irq_flags);
+
+		ioread32(addr+offset+4); /* 3rd read prior to write */
+		ioread32(addr+offset+4); /* 2nd read prior to write */
+		ioread32(addr+offset+4); /* 1st read prior to write */
+		iowrite32(value, addr+offset);
+
+		spin_unlock_irqrestore(&ar_pci->hw_v1_workaround_lock, irq_flags);
+	} else
+		iowrite32(value, addr+offset);
 }
 
 static inline u32 ath10k_pci_read32(struct ath10k *ar, u32 offset) {
Signature · 1 line
1.7.10
#2 lore raw

PATCH 2/2 ath10k: kill TARGET_TYPE_AR9888

In reply to Bartosz Markowski

Get rid of target_type variable also. At the moment ath10k does not support anything else then QCA988x HW.

---
 drivers/net/wireless/ath/ath10k/bmi.h  |    8 +++-----
 drivers/net/wireless/ath/ath10k/core.c |   28 ++++++----------------------
 drivers/net/wireless/ath/ath10k/core.h |   12 +++---------
 drivers/net/wireless/ath/ath10k/hw.h   |    2 --
 drivers/net/wireless/ath/ath10k/pci.c  |   21 +++++++--------------
 5 files changed, 19 insertions(+), 52 deletions(-)
drivers/net/wireless/ath/ath10k/bmi.h +3 -5
index f431589..49261d7 100644
@@ -198,8 +198,7 @@ int ath10k_bmi_write_memory(struct ath10k *ar, u32 address,
 		u32 addr;						\
 		__le32 tmp;						\
 									\
-		addr = host_interest_item_address(ar->target_type,	\
-						  HI_ITEM(item));	\
+		addr = host_interest_item_address(HI_ITEM(item));	\
 		ret = ath10k_bmi_read_memory(ar, addr, (u8 *) &tmp, 4); \
 		*val = __le32_to_cpu(tmp);				\
 		ret;							\
@@ -211,10 +210,9 @@ int ath10k_bmi_write_memory(struct ath10k *ar, u32 address,
 		u32 address;						\
 		__le32 v = __cpu_to_le32(val);				\
 									\
-		address = host_interest_item_address(ar->target_type,	\
-						     HI_ITEM(item));	\
+		address = host_interest_item_address(HI_ITEM(item));	\
 		ret = ath10k_bmi_write_memory(ar, address,		\
-					     (u8 *) &v, sizeof(v));	\
+					      (u8 *) &v, sizeof(v));	\
 		ret;							\
 	})
 
drivers/net/wireless/ath/ath10k/core.c +6 -22
index 4ff500c..186b216 100644
@@ -191,7 +191,6 @@ static int ath10k_init_transfer_bin_file(struct ath10k *ar,
 	const struct firmware *fw_entry;
 	u32 fw_entry_size;
 	u8 *temp_eeprom = NULL, *fw_buf = NULL;
-	u32 board_data_size;
 
 	switch (file) {
 	default:
@@ -240,7 +239,6 @@ static int ath10k_init_transfer_bin_file(struct ath10k *ar,
 
 	if (file == ATH10K_FILE_BOARD_DATA && fw_entry->data) {
 		u32 board_ext_address;
-		int32_t board_ext_data_size;
 
 		temp_eeprom = kmalloc(fw_entry_size, GFP_ATOMIC);
 		if (!temp_eeprom) {
@@ -251,16 +249,6 @@ static int ath10k_init_transfer_bin_file(struct ath10k *ar,
 
 		memcpy(temp_eeprom, fw_buf, fw_entry_size);
 
-		switch (ar->target_type) {
-		default:
-			board_ext_data_size = 0;
-			break;
-		case TARGET_TYPE_AR9888:
-			board_data_size =  AR9888_BOARD_DATA_SZ;
-			board_ext_data_size = AR9888_BOARD_EXT_DATA_SZ;
-			break;
-		}
-
 		/* Determine where in Target RAM to write Board Data */
 		ath10k_bmi_read32(ar, hi_board_ext_data, &board_ext_address);
 
@@ -272,12 +260,10 @@ static int ath10k_init_transfer_bin_file(struct ath10k *ar,
 		 * Check whether the target has allocated memory for extended
 		 * board data and file contains extended board data
 		 */
-		if (board_ext_address && (fw_entry_size == (board_data_size +
-						board_ext_data_size))) {
+		if (board_ext_address && (fw_entry_size == (AR9888_BOARD_DATA_SZ + AR9888_BOARD_EXT_DATA_SZ))) {
 			status = ath10k_bmi_write_memory(ar, board_ext_address,
-							 (u8 *)(((unsigned long)temp_eeprom) +
-							 board_data_size),
-							 board_ext_data_size);
+							 (u8 *)(((unsigned long)temp_eeprom) + AR9888_BOARD_DATA_SZ),
+							 AR9888_BOARD_EXT_DATA_SZ);
 
 			if (status != 0) {
 				ath10k_err("ath10k: BMI operation failed\n");
@@ -288,9 +274,9 @@ static int ath10k_init_transfer_bin_file(struct ath10k *ar,
 			 * Record the fact that extended board Data IS initialized
 			 */
 			ath10k_bmi_write32(ar, hi_board_ext_data_config,
-					   (board_ext_data_size << 16) | 1);
+					   (AR9888_BOARD_EXT_DATA_SZ << 16) | 1);
 
-			fw_entry_size = board_data_size;
+			fw_entry_size = AR9888_BOARD_DATA_SZ;
 		}
 	}
 
@@ -410,7 +396,7 @@ static int ath10k_init_hw_params(struct ath10k *ar)
 }
 
 struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
-				  enum ath10k_bus bus, u32 target_type,
+				  enum ath10k_bus bus,
 				  const struct ath10k_hif_ops *hif_ops)
 {
 	struct ath10k *ar;
@@ -426,7 +412,6 @@ struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
 
 	ar->p2p = !!ath10k_p2p;
 	ar->dev = dev;
-	ar->target_type = target_type;
 
 	ar->hif.priv = hif_priv;
 	ar->hif.ops = hif_ops;
@@ -487,7 +472,6 @@ int ath10k_core_register(struct ath10k *ar)
 	if (status)
 		goto err;
 
-	ar->target_type = target_info.type;
 	ar->target_version = target_info.version;
 	ar->hw->wiphy->hw_version = target_info.version;
 
drivers/net/wireless/ath/ath10k/core.h +3 -9
index 069471a..9f1a9fc 100644
@@ -105,14 +105,9 @@ static inline int ath10k_skb_unmap(struct device *dev, struct sk_buff *skb)
 	return 0;
 }
 
-static inline u32 host_interest_item_address(u32 target_type, u32 item_offset)
+static inline u32 host_interest_item_address(u32 item_offset)
 {
-	switch (target_type) {
-	default:
-		WARN_ON(1);
-	case TARGET_TYPE_AR9888:
-		return AR9888_HOST_INTEREST_ADDRESS + item_offset;
-	}
+	return AR9888_HOST_INTEREST_ADDRESS + item_offset;
 }
 
 struct ath10k_bmi {
@@ -266,7 +261,6 @@ struct ath10k {
 	struct device *dev;
 	u8 mac_addr[ETH_ALEN];
 
-	u32 target_type;
 	u32 target_version;
 	u8 fw_version_major;
 	u32 fw_version_minor;
@@ -370,7 +364,7 @@ static inline struct ath_common *ath10k_common(struct ath10k *ar)
 }
 
 struct ath10k *ath10k_core_create(void *hif_priv, struct device *dev,
-				  enum ath10k_bus bus, u32 target_type,
+				  enum ath10k_bus bus,
 				  const struct ath10k_hif_ops *hif_ops);
 void ath10k_core_destroy(struct ath10k *ar);
 
drivers/net/wireless/ath/ath10k/hw.h +0 -2
index 2e6fed9..1b6afa6 100644
@@ -20,8 +20,6 @@
 
 #include "targaddrs.h"
 
-#define TARGET_TYPE_AR9888	7
-
 /* Supported FW version */
 #define SUPPORTED_FW_MAJOR	1
 #define SUPPORTED_FW_MINOR	0
drivers/net/wireless/ath/ath10k/pci.c +7 -14
index 40ca6d3..e824d98 100644
@@ -694,10 +694,9 @@ static void ath10k_pci_hif_dump_area(struct ath10k *ar)
 	u32 host_addr;
 	u32 i;
 
-	host_addr = host_interest_item_address(ar->target_type,
-					       HI_ITEM(hi_failure_state));
-	if (ath10k_pci_diag_read_mem(ar, host_addr, (u8 *) &reg_dump_area,
-				     sizeof(u32)) != 0) {
+	host_addr = host_interest_item_address(HI_ITEM(hi_failure_state));
+	if (ath10k_pci_diag_read_mem(ar, host_addr,
+				     (u8 *) &reg_dump_area, sizeof(u32)) != 0) {
 		ath10k_warn("could not read hi_failure_state\n");
 		return;
 	}
@@ -1478,8 +1477,7 @@ static int ath10k_pci_init_config(struct ath10k *ar)
 	int ret = 0;
 
 	/* Download to Target the CE Config and the service-to-CE map */
-	interconnect_targ_addr = host_interest_item_address(ar->target_type,
-						HI_ITEM(hi_interconnect_state));
+	interconnect_targ_addr = host_interest_item_address(HI_ITEM(hi_interconnect_state));
 
 	/* Supply Target-side CE configuration */
 	ret = ath10k_pci_diag_read_access(ar, interconnect_targ_addr,
@@ -1560,8 +1558,7 @@ static int ath10k_pci_init_config(struct ath10k *ar)
 	}
 
 	/* configure early allocation */
-	ealloc_targ_addr = host_interest_item_address(ar->target_type,
-						      HI_ITEM(hi_early_alloc));
+	ealloc_targ_addr = host_interest_item_address(HI_ITEM(hi_early_alloc));
 
 	ret = ath10k_pci_diag_read_access(ar, ealloc_targ_addr, &ealloc_value);
 	if (ret != 0) {
@@ -1582,8 +1579,7 @@ static int ath10k_pci_init_config(struct ath10k *ar)
 	}
 
 	/* Tell Target to proceed with initialization */
-	flag2_targ_addr = host_interest_item_address(ar->target_type,
-						     HI_ITEM(hi_option_flag2));
+	flag2_targ_addr = host_interest_item_address(HI_ITEM(hi_option_flag2));
 
 	ret = ath10k_pci_diag_read_access(ar, flag2_targ_addr, &flag2_value);
 	if (ret != 0) {
@@ -2154,7 +2150,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	u32 fw_indicator;
 	u32 lcr_val;
 	int retries = 3;
-	u32 target_type;
 
 	ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__);
 retry:
@@ -2169,10 +2164,8 @@ retry:
 
 	switch (pci_dev->device) {
 	case AR9888_1_0_DEVICE_ID:
-		target_type = TARGET_TYPE_AR9888;
 		break;
 	case AR9888_2_0_DEVICE_ID:
-		target_type = TARGET_TYPE_AR9888;
 		set_bit(ATH10K_PCI_FEATURE_MSI_X, ar_pci->features);
 		break;
 	default:
@@ -2184,7 +2177,7 @@ retry:
 	ath10k_pci_dump_features(ar_pci);
 
 	ar = ath10k_core_create(ar_pci, ar_pci->dev, ATH10K_BUS_PCI,
-				target_type, &ath10k_pci_hif_ops);
+				&ath10k_pci_hif_ops);
 	if (!ar) {
 		ath10k_err("ath10k_core_create failed!\n");
 		ret = -EINVAL;
Signature · 1 line
1.7.10
#3 lore raw

cover ath10k: killing things..

In reply to Bartosz Markowski
Quoted 4 lines · Markowski Bartosz

Bartosz Markowski (2):
ath10k: kill pci_write32_v1_workaround function
ath10k: kill TARGET_TYPE_AR9888

Quoted 8 lines
  drivers/net/wireless/ath/ath10k/bmi.h  |    8 +++----
  drivers/net/wireless/ath/ath10k/core.c |   28 +++++------------------
  drivers/net/wireless/ath/ath10k/core.h |   12 +++-------
  drivers/net/wireless/ath/ath10k/hw.h   |    2 --
  drivers/net/wireless/ath/ath10k/pci.c  |   21 ++++++------------
  drivers/net/wireless/ath/ath10k/pci.h  |   38 ++++++++++++++------------------
  6 files changed, 36 insertions(+), 73 deletions(-)

I have resent this in v2 (with few more patches).
Please drop this patch set.

Bartosz