imx: mx35pdk: Fix MUX2_CTR GPIO
PATCH 1/1 imx: mx35pdk: Fix MUX2_CTR GPIO
MUX2_CTR is on GPIO1[5], not GPIO2[5], and it needs to be set high in order to connect the FEC.
Signed-off-by Beno?t Th?baudeau <[email protected]>
--- board/freescale/mx35pdk/mx35pdk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
board/freescale/mx35pdk/mx35pdk.c +1 -1
@@ -245,7 +245,7 @@ int board_late_init(void)imx_iomux_v3_setup_pad (MX35_PAD_COMPARE__GPIO1_5 ); -gpio_direction_output (IMX_GPIO_NR (2 ,5 ),1 ); +gpio_direction_output (IMX_GPIO_NR (1 ,5 ),1 ); } val =mc9sdz60_reg_read (MC9SDZ60_REG_GPIO_1 ) |0x04 ;
Signature · 1 line
1.7.10.4
PATCH 1/1 imx: mx35pdk: Fix MUX2_CTR GPIO
Quoted 14 lines · Beno?t Th?baudeau
MUX2_CTRis on GPIO1[5], not GPIO2[5], and it needs to be set high in order to connect the FEC.Signed-off-by Beno?t Th?baudeau <[email protected]>--- board/freescale/mx35pdk/mx35pdk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)board/freescale/mx35pdk/mx35pdk.c +0
-0
board/freescale/mx35pdk/mx35pdk.c int board_late_init(void) · line 251
Quoted 8 lines
board/freescale/mx35pdk/mx35pdk.c +1
-1@@ -245,7 +245,7 @@ int board_late_init(void)imx_iomux_v3_setup_pad (MX35_PAD_COMPARE__GPIO1_5 ); -gpio_direction_output (IMX_GPIO_NR (2 ,5 ),1 ); +gpio_direction_output (IMX_GPIO_NR (1 ,5 ),1 ); } val =mc9sdz60_reg_read (MC9SDZ60_REG_GPIO_1 ) |0x04 ;
Thanks for fixing it !
Applied to u-boot-imx, thanks.
Best regards,
Stefano Babic
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================