Skip to contentSkip to conversation

arm/km: fix u-boot update functionality

PATCH New Holger Brunck 3 participants 3 messages May 6, 2013 – May 7, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm/km: fix u-boot update functionality

Due to the new I2C framework we need to adapt the u-boot update function. Due to the new framework all i2c leafs behind a mux are present in the system and not only those who are defined and used. So it is bus number 5 after the rework.

cc Heiko Schocher <[email protected]>
cc Prafulla Wadaskar <[email protected]>

---
This patch is dependent to the already posted patchserie:
http://lists.denx.de/pipermail/u-boot/2013-May/153452.html

 include/configs/km/km_arm.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
include/configs/km/km_arm.h +2 -1
index ebbfa84..4da54d5 100644
@@ -295,7 +295,8 @@ int get_scl(void);
 #else
 #define CONFIG_KM_NEW_ENV						\
 	"newenv=setenv addr 0x100000 && "				\
-		"i2c dev 1; mw.b ${addr} 0 4 && "			\
+		"i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; "  \
+		"mw.b ${addr} 0 4 && "					\
 		"eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR)	\
 		" ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && "	\
 		"eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR)	\
Signature · 1 line
1.8.0.1
#1 lore raw

PATCH 1/1 arm/km: fix u-boot update functionality

Hello Prafulla,

Am 06.05.2013 14:54, schrieb Holger Brunck:

Quoted 8 lines

Due to the new I2C framework we need to adapt the u-boot update function. Due to the new framework all i2c leafs behind a mux are present in the system and not only those who are defined and used. So it is bus number 5 after the rework.

cc Heiko Schocher <[email protected]>
cc Prafulla Wadaskar <[email protected]>
Quoted 6 lines

---
This patch is dependent to the already posted patchserie:
http://lists.denx.de/pipermail/u-boot/2013-May/153452.html

 include/configs/km/km_arm.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

I added this patch to my ToDo List in Patchwork, if it is OK for you?

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
#2 lore raw

PATCH 1/1 arm/km: fix u-boot update functionality

Quoted 29 lines

-----Original Message-----
From: Heiko Schocher [mailto:hs at denx.de]
Sent: 06 May 2013 19:32
To: Holger Brunck
Cc: u-boot at lists.denx.de; Prafulla Wadaskar
Subject: Re: [PATCH] arm/km: fix u-boot update
functionality

Hello Prafulla,

Am 06.05.2013 14:54, schrieb Holger Brunck:

Quoted 1 line

Due to the new I2C framework we need to adapt the u-

boot update

Quoted 1 line

function. Due to the new framework all i2c leafs

behind a mux are

Quoted 1 line

present in the system and not only those who are

defined and used. So it

Quoted 3 lines

is bus number 5 after the rework.

Signed-off-by Holger Brunck

<[email protected]>

Quoted 4 lines
cc Heiko Schocher <[email protected]>
cc Prafulla Wadaskar <[email protected]>

---
This patch is dependent to the already posted

patchserie:

Quoted 1 line

http://lists.denx.de/pipermail/u-boot/2013-

Quoted 8 lines

May/153452.html

Quoted 3 lines
 include/configs/km/km_arm.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

I added this patch to my ToDo List in Patchwork, if it is OK
for you?

Dear Heiko
That should be okay, no issues, please go ahead.

Regards...
Prafulla . . .