semctl/semctl01.c: cleanup

index c8957c8..ff734f8 100644
@@ -1,20 +1,19 @@
 /*
+ * Copyright (c) International Business Machines  Corp., 2001
  *
- *   Copyright (c) International Business Machines  Corp., 2001
+ * This program is free software;  you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
  *
- *   This program is free software;  you can redistribute it and/or modify
- *   it under the terms of the GNU General Public License as published by
- *   the Free Software Foundation; either version 2 of the License, or
- *   (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY;  without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
+ * the GNU General Public License for more details.
  *
- *   This program is distributed in the hope that it will be useful,
- *   but WITHOUT ANY WARRANTY;  without even the implied warranty of
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See
- *   the GNU General Public License for more details.
- *
- *   You should have received a copy of the GNU General Public License
- *   along with this program;  if not, write to the Free Software
- *   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ * You should have received a copy of the GNU General Public License
+ * along with this program;  if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
 /*

@@ -22,7 +21,7 @@
  *	semctl01.c
  *
  * DESCRIPTION
- *	semctl01 - test the 10 possible semctl() commands
+ *	semctl01 - test the 13 possible semctl() commands
  *
  * ALGORITHM
  *	create a semaphore set with read and alter permissions

@@ -35,31 +34,11 @@
  *	    otherwise,
  *	      if doing functionality testing
  *		call the appropriate test function
- *	  	if correct,
+ *		if correct,
  *			issue a PASS message
  *		otherwise
  *			issue a FAIL message
  *	call cleanup
- *
- * USAGE:  <for command-line>
- *  semctl01 [-c n] [-f] [-i n] [-I x] [-P x] [-t]
- *     where,  -c n : Run n copies concurrently.
- *             -f   : Turn off functionality Testing.
- *	       -i n : Execute test n times.
- *	       -I x : Execute test for x seconds.
- *	       -P x : Pause for x seconds between iterations.
- *	       -t   : Turn on syscall timing.
- *
- * HISTORY
- *	03/2001 - Written by Wayne Boyer
- *
- *      11/03/2008 Renaud Lottiaux ([email protected])
- *      - Fix concurrency issue. Due to the use of usleep function to
- *        synchronize processes, synchronization issues can occur on a loaded
- *        system. Fix this by using pipes to synchronize processes.
- *
- * RESTRICTIONS
- *	none
  */
 
 #include "ipcsem.h"

@@ -68,35 +47,35 @@
 char *TCID = "semctl01";
 int TST_TOTAL = 10;
 
-int sem_id_1 = -1;		/* a semaphore set with read and alter permissions */
+static int sem_id_1 = -1;
 
-int sync_pipes[2];
+static int sync_pipes[2];
 
 /*
  * These are the various setup and check functions for the 10 different
  * commands that are available for the semctl() call.
  */
-void func_stat(void);
-void set_setup(void), func_set(void);
-void func_gall(void);
-void cnt_setup(int), func_cnt(int);
-void pid_setup(void), func_pid(int);
-void gval_setup(void), func_gval(int);
-void sall_setup(void), func_sall(void);
-void func_sval(void);
-void func_rmid(void);
-void child_cnt(void);
-void child_pid(void);
-
-struct semid_ds buf;
-unsigned short array[PSEMS];
-struct sembuf sops;
-
-#define INCVAL 2		/* a semaphore increment value */
+static void func_stat(void);
+static void set_setup(void), func_set(void);
+static void func_gall(void);
+static void cnt_setup(int), func_cnt(int);
+static void pid_setup(void), func_pid(int);
+static void func_gval(int);
+static void sall_setup(void), func_sall(void);
+static void func_sval(void);
+static void func_rmid(void);
+static void child_cnt(void);
+static void child_pid(void);
+
+static struct semid_ds buf;
+static unsigned short array[PSEMS];
+static struct sembuf sops;
+
+#define INCVAL 2
 #define NEWMODE	066
 #define NCHILD	5
-#define SEM2	2		/* semaphore to use for GETPID and GETVAL */
-#define SEM4	4		/* semaphore to use for GETNCNT and GETZCNT */
+#define SEM2	2
+#define SEM4	4
 #define ONE	1
 #ifdef _XLC_COMPILER
 #define SEMUN_CAST

@@ -104,64 +83,54 @@ struct sembuf sops;
 #define SEMUN_CAST (union semun)
 #endif
 
-#ifdef _XLC_COMPILER
-#define SEMUN_CAST
-#else
-#define SEMUN_CAST (union semun)
-#endif
-
-int pid_arr[NCHILD];
+static int pid_arr[NCHILD];
 
 #ifdef UCLINUX
 #define PIPE_NAME	"semctl01"
 static char *argv0;
-int sem_op;
+static int sem_op;
 #endif
 
-struct test_case_t {
-	int semnum;		/* the primitive semaphore to use */
-	int cmd;		/* the command to test */
-	void (*func_test) ();	/* the test function */
+static struct test_case_t {
+	int semnum;
+	int cmd;
+	void (*func_test) ();
 	union semun arg;
-	void (*func_setup) ();	/* the setup function if necessary */
+	void (*func_setup) ();
 } TC[] = {
-	{
-	0, IPC_STAT, func_stat, SEMUN_CAST & buf, NULL}, {
-	0, IPC_SET, func_set, SEMUN_CAST & buf, set_setup}, {
-	0, GETALL, func_gall, SEMUN_CAST array, NULL}, {
-	SEM4, GETNCNT, func_cnt, SEMUN_CAST & buf, cnt_setup}, {
-	SEM2, GETPID, func_pid, SEMUN_CAST & buf, pid_setup}, {
-	SEM2, GETVAL, func_gval, SEMUN_CAST & buf, NULL}, {
-	SEM4, GETZCNT, func_cnt, SEMUN_CAST & buf, cnt_setup}, {
-	0, SETALL, func_sall, SEMUN_CAST array, sall_setup}, {
-	SEM4, SETVAL, func_sval, SEMUN_CAST INCVAL, NULL}, {
-	0, IPC_RMID, func_rmid, SEMUN_CAST & buf, NULL}
+	{0, IPC_STAT, func_stat, SEMUN_CAST & buf, NULL},
+	{0, IPC_SET, func_set, SEMUN_CAST & buf, set_setup},
+	{0, GETALL, func_gall, SEMUN_CAST array, NULL},
+	{SEM4, GETNCNT, func_cnt, SEMUN_CAST & buf, cnt_setup},
+	{SEM2, GETPID, func_pid, SEMUN_CAST & buf, pid_setup},
+	{SEM2, GETVAL, func_gval, SEMUN_CAST & buf, NULL},
+	{SEM4, GETZCNT, func_cnt, SEMUN_CAST & buf, cnt_setup},
+	{0, SETALL, func_sall, SEMUN_CAST array, sall_setup},
+	{SEM4, SETVAL, func_sval, SEMUN_CAST INCVAL, NULL},
+	{0, IPC_RMID, func_rmid, SEMUN_CAST & buf, NULL},
 };
 
-int main(int ac, char **av)
+int main(int argc, char *argv[])
 {
 	int lc;
 	char *msg;
 	int i, j;
 
-	if ((msg = parse_opts(ac, av, NULL, NULL)) != NULL) {
+	msg = parse_opts(argc, argv, NULL, NULL);
+	if (msg != NULL)
 		tst_brkm(TBROK, NULL, "OPTION PARSING ERROR - %s", msg);
-	}
+
 #ifdef UCLINUX
-	argv0 = av[0];
+	argv0 = argv[0];
 	maybe_run_child(&child_pid, "nd", 1, &sem_id_1);
 	maybe_run_child(&child_cnt, "ndd", 2, &sem_id_1, &sem_op);
 #endif
 
-	setup();		/* global setup */
-
-	/* The following loop checks looping state if -i option given */
+	setup();
 
 	for (lc = 0; TEST_LOOPING(lc); lc++) {
-		/* reset tst_count in case we are looping */
 		tst_count = 0;
 
-		/* loop through the test cases */
 		for (i = 0; i < TST_TOTAL; i++) {
 
 			/*

@@ -182,10 +151,6 @@ int main(int ac, char **av)
 				}
 			}
 
-			/*
-			 * Use TEST macro to make the call
-			 */
-
 			TEST(semctl(sem_id_1, TC[i].semnum, TC[i].cmd,
 				    TC[i].arg));
 

@@ -202,9 +167,9 @@ int main(int ac, char **av)
 					 */
 					switch (TC[i].cmd) {
 					case GETNCNT:
-					 /*FALLTHROUGH*/ case GETZCNT:
-					 /*FALLTHROUGH*/ case GETPID:
-					 /*FALLTHROUGH*/ case GETVAL:
+					case GETZCNT:
+					case GETPID:
+					case GETVAL:
 						(*TC[i].func_test)
 						    (TEST_RETURN);
 						break;

@@ -222,12 +187,11 @@ int main(int ac, char **av)
 			 */
 			switch (TC[i].cmd) {
 			case GETNCNT:
-			 /*FALLTHROUGH*/ case GETZCNT:
+			case GETZCNT:
 				for (j = 0; j < NCHILD; j++) {
-					if (kill(pid_arr[j], SIGKILL) == -1) {
+					if (kill(pid_arr[j], SIGKILL) == -1)
 						tst_brkm(TBROK, cleanup,
 							 "child kill failed");
-					}
 				}
 				break;
 			}

@@ -236,39 +200,36 @@ int main(int ac, char **av)
 		 * recreate the semaphore resource if looping
 		 */
 		if (TEST_LOOPING(lc)) {
-			if ((sem_id_1 = semget(semkey, PSEMS,
-					       IPC_CREAT | IPC_EXCL | SEM_RA))
-			    == -1) {
+			sem_id_1 = semget(semkey, PSEMS,
+					  IPC_CREAT | IPC_EXCL | SEM_RA);
+			if (sem_id_1 == -1)
 				tst_brkm(TBROK, cleanup,
 					 "couldn't recreate " "semaphore");
-			}
 		}
 	}
 
 	cleanup();
 
 	tst_exit();
-
 }
 
 /*
  * func_stat() - check the functionality of the IPC_STAT command with semctl()
  */
-void func_stat()
+static void func_stat(void)
 {
 	/* check the number of semaphores and the ipc_perm.mode value */
-	if (buf.sem_nsems == PSEMS && buf.sem_perm.mode == (SEM_RA)) {
+	if (buf.sem_nsems == PSEMS && buf.sem_perm.mode == (SEM_RA))
 		tst_resm(TPASS, "buf.sem_nsems and buf.sem_perm.mode"
 			 " are correct");
-	} else {
+	else
 		tst_resm(TFAIL, "semaphore STAT info is incorrect");
-	}
 }
 
 /*
  * set_setup() - set up for the IPC_SET command with semctl()
  */
-void set_setup()
+static void set_setup(void)
 {
 	/* set up a new mode for the semaphore set */
 	buf.sem_perm.mode = SEM_RA | NEWMODE;

@@ -277,7 +238,7 @@ void set_setup()
 /*
  * func_set() - check the functionality of the IPC_SET command with semctl()
  */
-void func_set()
+static void func_set(void)
 {
 	/* first stat the semaphore to get the new data */
 	if (semctl(sem_id_1, 0, IPC_STAT, (union semun)&buf) == -1) {

@@ -286,17 +247,16 @@ void func_set()
 	}
 
 	/* check that the new mode is what we set */
-	if (buf.sem_perm.mode == (SEM_RA | NEWMODE)) {
+	if (buf.sem_perm.mode == (SEM_RA | NEWMODE))
 		tst_resm(TPASS, "buf.sem_perm.mode is correct");
-	} else {
+	else
 		tst_resm(TFAIL, "semaphore mode info is incorrect");
-	}
 }
 
 /*
  * func_gall() - check the functionality of the GETALL command with semctl()
  */
-void func_gall()
+static void func_gall(void)
 {
 	int i;
 

@@ -313,7 +273,7 @@ void func_gall()
 /*
  * cnt_setup() - set up for the GETNCNT and GETZCNT commands with semctl()
  */
-void cnt_setup(int opval)
+static void cnt_setup(int opval)
 {
 	int pid, i;
 

@@ -326,31 +286,31 @@ void cnt_setup(int opval)
 	if (opval == 0) {
 		/* initialize the semaphore value to ONE */
 		sops.sem_op = ONE;
-		if (semop(sem_id_1, &sops, 1) == -1) {
+		if (semop(sem_id_1, &sops, 1) == -1)
 			tst_brkm(TBROK, cleanup, "semop #1 failed - cnt_setup");
-		}
 	}
 
-	sops.sem_op = opval;	/* set the correct operation */
+	/* set the correct operation */
+	sops.sem_op = opval;
 	for (i = 0; i < NCHILD; i++) {
 		if (sync_pipe_create(sync_pipes, PIPE_NAME) == -1)
 			tst_brkm(TBROK, cleanup, "sync_pipe_create failed");
 
 		/* fork five children to wait */
-		if ((pid = FORK_OR_VFORK()) == -1)
+		pid = FORK_OR_VFORK();
+		if (pid == -1)
 			tst_brkm(TBROK, cleanup, "fork failed in cnt_setup");
 
-		if (pid == 0) {	/* child */
+		if (pid == 0) {
 #ifdef UCLINUX
 			sem_op = sops.sem_op;
-			if (self_exec(argv0, "ndd", 2, sem_id_1, sem_op) < 0) {
+			if (self_exec(argv0, "ndd", 2, sem_id_1, sem_op) < 0)
 				tst_brkm(TBROK, cleanup, "self_exec failed "
 					 "in cnt_setup");
-			}
 #else
 			child_cnt();
 #endif
-		} else {	/* parent */
+		} else {
 			if (sync_pipe_wait(sync_pipes) == -1)
 				tst_brkm(TBROK, cleanup,
 					 "sync_pipe_wait failed");

@@ -370,7 +330,7 @@ void cnt_setup(int opval)
 	sleep(1);
 }
 
-void child_cnt()
+static void child_cnt(void)
 {
 #ifdef UCLINUX
 	sops.sem_op = (short int)sem_op;

@@ -397,9 +357,9 @@ void child_cnt()
 	 * routine which should cause an error to be return
 	 * by the semop() call.
 	 */
-	if (semop(sem_id_1, &sops, 1) != -1) {
+	if (semop(sem_id_1, &sops, 1) != -1)
 		tst_resm(TBROK, "semop succeeded - cnt_setup");
-	}
+
 	exit(0);
 }
 

@@ -407,40 +367,37 @@ void child_cnt()
  * func_cnt() - check the functionality of the GETNCNT and GETZCNT commands
  *	        with semctl()
  */
-void func_cnt(int rval)
+static void func_cnt(int rval)
 {
 
-	if (rval == NCHILD) {
+	if (rval == NCHILD)
 		tst_resm(TPASS, "number of sleeping processes is correct");
-	} else {
+	else
 		tst_resm(TFAIL, "number of sleeping processes is not correct");
-	}
 }
 
 /*
  * pid_setup() - set up for the GETPID command with semctl()
  */
-void pid_setup()
+static void pid_setup(void)
 {
 	int pid;
 
-	if (sync_pipe_create(sync_pipes, PIPE_NAME) == -1) {
+	if (sync_pipe_create(sync_pipes, PIPE_NAME) == -1)
 		tst_brkm(TBROK, cleanup, "sync_pipe_create failed");
-	}
 
 	/*
 	 * Fork a child to do a semop that will pass.
 	 */
-	if ((pid = FORK_OR_VFORK()) == -1) {
+	pid = FORK_OR_VFORK();
+	if (pid == -1)
 		tst_brkm(TBROK, cleanup, "fork failed in pid_setup()");
-	}
 
 	if (pid == 0) {		/* child */
 #ifdef UCLINUX
-		if (self_exec(argv0, "nd", 1, sem_id_1) < 0) {
+		if (self_exec(argv0, "nd", 1, sem_id_1) < 0)
 			tst_brkm(TBROK, cleanup, "self_exec failed "
 				 "in pid_setup()");
-		}
 #else
 		child_pid();
 #endif

@@ -455,7 +412,7 @@ void pid_setup()
 	}
 }
 
-void child_pid()
+static void child_pid(void)
 {
 #ifdef UCLINUX
 	if (sync_pipe_create(sync_pipes, PIPE_NAME) == -1)

@@ -468,53 +425,50 @@ void child_pid()
 	if (sync_pipe_close(sync_pipes, PIPE_NAME) == -1)
 		tst_brkm(TBROK, cleanup, "sync_pipe_close failed");
 
-	sops.sem_num = SEM2;	/* semaphore to change */
-	sops.sem_op = ONE;	/* operation is to increment semaphore */
+	sops.sem_num = SEM2;
+	sops.sem_op = ONE;
 	sops.sem_flg = 0;
 
 	/*
 	 * Do a semop that will increment the semaphore.
 	 */
-	if (semop(sem_id_1, &sops, 1) == -1) {
+	if (semop(sem_id_1, &sops, 1) == -1)
 		tst_resm(TBROK, "semop failed - pid_setup");
-	}
+
 	exit(0);
 }
 
 /*
  * func_pid() - check the functionality of the GETPID command with semctl()
  */
-void func_pid(int rval)
+static void func_pid(int rval)
 {
 	/* compare the rval (pid) to the saved pid from the setup */
-	if (rval == pid_arr[SEM2]) {
+	if (rval == pid_arr[SEM2])
 		tst_resm(TPASS, "last pid value is correct");
-	} else {
+	else
 		tst_resm(TFAIL, "last pid value is not correct");
-	}
 }
 
 /*
  * func_gval() - check the functionality of the GETVAL command with semctl()
  */
-void func_gval(int rval)
+static void func_gval(int rval)
 {
 	/*
 	 * This is a simple test.  The semaphore value should be equal
 	 * to ONE as it was set in the last test (GETPID).
 	 */
-	if (rval == 1) {
+	if (rval == 1)
 		tst_resm(TPASS, "semaphore value is correct");
-	} else {
+	else
 		tst_resm(TFAIL, "semaphore value is not correct");
-	}
-
 }
 
 /*
  * all_setup() - set up for the SETALL command with semctl()
  */
-void sall_setup()
+static void sall_setup(void)
 {
 	int i;
 

@@ -527,7 +481,7 @@ void sall_setup()
 /*
  * func_sall() - check the functionality of the SETALL command with semctl()
  */
-void func_sall()
+static void func_sall(void)
 {
 	int i;
 	unsigned short rarray[PSEMS];

@@ -536,9 +490,8 @@ void func_sall()
 	 * do a GETALL and compare the values to those set above
 	 */
 
-	if (semctl(sem_id_1, 0, GETALL, (union semun)rarray) == -1) {
+	if (semctl(sem_id_1, 0, GETALL, (union semun)rarray) == -1)
 		tst_brkm(TBROK, cleanup, "semctl failed in func_sall");
-	}
 
 	for (i = 0; i < PSEMS; i++) {
 		if (array[i] != rarray[i]) {

@@ -553,7 +506,7 @@ void func_sall()
 /*
  * func_sval() - check the functionality of the SETVAL command with semctl()
  */
-void func_sval()
+static void func_sval(void)
 {
 	int semv;
 	union semun arr;

@@ -562,42 +515,36 @@ void func_sval()
 	 * do a GETVAL and compare it to the value set above
 	 */
 
-	if ((semv = semctl(sem_id_1, SEM4, GETVAL, arr)) == -1) {
+	semv = semctl(sem_id_1, SEM4, GETVAL, arr);
+	if (semv == -1)
 		tst_brkm(TBROK, cleanup, "semctl failed in func_sval");
-	}
 
-	if (semv != INCVAL) {
+	if (semv != INCVAL)
 		tst_resm(TFAIL, "semaphore value is not what was set");
-	} else {
+	else
 		tst_resm(TPASS, "semaphore value is correct");
-	}
 }
 
 /*
  * func_rmid() - check the functionality of the IPC_RMID command with semctl()
  */
-void func_rmid()
+static void func_rmid(void)
 {
 
 	/*
 	 * do a semop() - we should get EINVAL
 	 */
-	if (semop(sem_id_1, &sops, 1) != -1) {
+	if (semop(sem_id_1, &sops, 1) != -1)
 		tst_resm(TFAIL, "semop succeeded on expected fail");
-	}
 
-	if (errno != EINVAL) {
+	if (errno != EINVAL)
 		tst_resm(TFAIL, "returned errno - %d - is not expected", errno);
-	} else {
+	else
 		tst_resm(TPASS, "semaphore appears to be removed");
-	}
 
 	sem_id_1 = -1;
 }
 
-/*
- * setup() - performs all the ONE TIME setup for this test.
- */
 void setup(void)
 {
 

@@ -605,27 +552,17 @@ void setup(void)
 
 	TEST_PAUSE;
 
-	/*
-	 * Create a temporary directory and cd into it.
-	 * This helps to ensure that a unique msgkey is created.
-	 * See ../lib/libipc.c for more information.
-	 */
 	tst_tmpdir();
 
 	/* get an IPC resource key */
 	semkey = getipckey();
 
 	/* create a semaphore set with read and alter permissions */
-	if ((sem_id_1 =
-	     semget(semkey, PSEMS, IPC_CREAT | IPC_EXCL | SEM_RA)) == -1) {
+	sem_id_1 = semget(semkey, PSEMS, IPC_CREAT | IPC_EXCL | SEM_RA);
+	if (sem_id_1 == -1)
 		tst_brkm(TBROK, cleanup, "couldn't create semaphore in setup");
-	}
 }
 
-/*
- * cleanup() - performs all the ONE TIME cleanup for this test at completion
- * 	       or premature exit.
- */
 void cleanup(void)
 {
 	/* if it exists, remove the semaphore resource */

@@ -633,10 +570,5 @@ void cleanup(void)
 
 	tst_rmdir();
 
-	/*
-	 * print timing stats if that option was specified.
-	 * print errno log if that option was specified.
-	 */
 	TEST_CLEANUP;
-
 }

index ff734f8..687d909 100644
@@ -41,11 +41,15 @@
  *	call cleanup
  */
 
+
+#ifndef _GNU_SOURCE
+#define _GNU_SOURCE
+#endif
 #include "ipcsem.h"
 #include "libtestsuite.h"
 
 char *TCID = "semctl01";
-int TST_TOTAL = 10;
+int TST_TOTAL = 13;
 
 static int sem_id_1 = -1;
 

@@ -66,8 +70,12 @@ static void func_sval(void);
 static void func_rmid(void);
 static void child_cnt(void);
 static void child_pid(void);
+static void func_iinfo(int);
+static void func_sinfo(void);
+static void func_sstat(int);
 
 static struct semid_ds buf;
+static struct seminfo ipc_buf;
 static unsigned short array[PSEMS];
 static struct sembuf sops;
 

@@ -107,6 +115,9 @@ static struct test_case_t {
 	{SEM4, GETZCNT, func_cnt, SEMUN_CAST & buf, cnt_setup},
 	{0, SETALL, func_sall, SEMUN_CAST array, sall_setup},
 	{SEM4, SETVAL, func_sval, SEMUN_CAST INCVAL, NULL},
+	{0, IPC_INFO, func_iinfo, SEMUN_CAST & ipc_buf, NULL},
+	{0, SEM_INFO, func_sinfo, SEMUN_CAST & ipc_buf, NULL},
+	{0, SEM_STAT, func_sstat, SEMUN_CAST & buf, NULL},
 	{0, IPC_RMID, func_rmid, SEMUN_CAST & buf, NULL},
 };
 

@@ -170,6 +181,8 @@ int main(int argc, char *argv[])
 					case GETZCNT:
 					case GETPID:
 					case GETVAL:
+					case IPC_INFO:
+					case SEM_STAT:
 						(*TC[i].func_test)
 						    (TEST_RETURN);
 						break;

@@ -545,6 +558,30 @@ static void func_rmid(void)
 	sem_id_1 = -1;
 }
 
+static void func_iinfo(int hidx)
+{
+	if (hidx >= 0)
+		tst_resm(TPASS, "the highest index is correct");
+	else
+		tst_resm(TFAIL, "the highest index is incorrect");
+}
+
+static void func_sinfo(void)
+{
+	if (ipc_buf.semusz < 1)
+		tst_resm(TFAIL, "number of semaphore sets is incorrect");
+	else
+		tst_resm(TPASS, "number of semaphore sets is correct");
+}
+
+static void func_sstat(int semidx)
+{
+	if (semidx >= 0)
+		tst_resm(TPASS, "id of the semaphore set is correct");
+	else
+		tst_resm(TFAIL, "id of the semaphore set is incorrect");
+}
+
 void setup(void)
 {