at91: Correct CONFIG_AUTOBOOT_PROMPT definition for pm9263
PATCH v4 1/9 at91: Correct CONFIG_AUTOBOOT_PROMPT definition for pm9263
This is not currently used, since autoboot is not enabled for this board, but the string is missing a parameter. Add it.
---
Changes in v4: None
Changes in v3: None
include/configs/pm9263.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/pm9263.h +1 -1
@@ -355,7 +355,7 @@#define CONFIG_BOOTCOMMAND "run flashboot"#define CONFIG_ROOTPATH "/ronetix/rootfs" -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay#define CONFIG_CON_ROT "fbcon=rotate:3 "#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 "\
Signature · 1 line
1.8.2.1
PATCH v4 2/9 net: Add prototype for update_tftp
This function should be declared in net.h.
---
Changes in v4:
- Removed autoconf() code for now
Changes in v3: None
common/cmd_fitupd.c | 3 +-- common/main.c | 4 ---- include/net.h | 3 +++ 3 files changed, 4 insertions(+), 6 deletions(-)
common/cmd_fitupd.c +1 -2
@@ -8,13 +8,12 @@#include <common.h> #include <command.h> +#include <net.h> #if !defined(CONFIG_UPDATE_TFTP )#error "CONFIG_UPDATE_TFTP required"#endif -extern int update_tftp (ulong addr); -static int do_fitupd (cmd_tbl_t *cmdtp,int flag,int argc,char *const argv[]) {ulong addr =0UL ;
common/main.c +0 -4
@@ -57,10 +57,6 @@ DECLARE_GLOBAL_DATA_PTR;void inline __show_boot_progress (int val) {}void show_boot_progress (int val) __attribute__((weak,alias ("__show_boot_progress" ))); -#if defined(CONFIG_UPDATE_TFTP ) -int update_tftp (ulong addr); -#endif /* CONFIG_UPDATE_TFTP */ -#define MAX_DELAY_STOP_STR 32#undef DEBUG_PARSER
include/net.h +3 -0
@@ -695,6 +695,9 @@ extern void copy_filename(char *dst, const char *src, int size);/* get a random source port */ extern unsigned int random_port (void ); +/* Update U-Boot over TFTP */ +extern int update_tftp (ulong addr); +/**********************************************************************/ #endif /* __NET_H__ */
Signature · 1 line
1.8.2.1
PATCH v4 2/9 net: Add prototype for update_tftp
Quoted 7 lines · Simon Glass
This function should be declared in
net.h.Signed-off-by Simon Glass <[email protected]>---
Changes in v4:
- Removedautoconf()code for now
Quoted 6 lines
Changes in v3: None
common/cmd_fitupd.c | 3 +-- common/main.c | 4 ---- include/net.h | 3 +++ 3 files changed, 4 insertions(+), 6 deletions(-)
PATCH v4 3/9 main: Separate out the two abortboot() functions
In reply to Simon GlassThere are two implementations of abortboot(). Turn these into two separate functions, and create a single abortboot() which calls either one or the other.
Also it seems that nothing uses abortboot() outside main, so make it static.
At this point there is no further use of CONFIG_MENU in main.c.
---
Changes in v4:
- Create a patch that moves the code but still uses #ifdef
Changes in v3:
- Fix commit message which said autoboot() instead of abortboot()
- Add note about CONFIG_MENU not being needed in main.c anymore
common/main.c | 19 +++++++++++-------- include/common.h | 3 --- 2 files changed, 11 insertions(+), 11 deletions(-)
common/main.c +11 -8
@@ -89,10 +89,7 @@ extern void mdm_init(void); /* defined in board.c */*/ #if defined(CONFIG_BOOTDELAY) # if defined(CONFIG_AUTOBOOT_KEYED) -#ifndef CONFIG_MENU -static inline -#endif -int abortboot(int bootdelay) +static int abortboot_keyed(int bootdelay) { int abort = 0; uint64_t etime = endtick(bootdelay);
@@ -211,10 +208,7 @@ int abortboot(int bootdelay)static int menukey =0 ;#endif -#ifndef CONFIG_MENU -static inline -#endif -int abortboot (int bootdelay) +static int abortboot_normal (int bootdelay) {int abort =0 ;unsigned long ts;
@@ -271,6 +265,15 @@ int abortboot(int bootdelay)return abort; }# endif /* CONFIG_AUTOBOOT_KEYED */ + +static int abortboot (int bootdelay) +{ +#ifdef CONFIG_AUTOBOOT_KEYED +return abortboot_keyed (bootdelay); +#else +return abortboot_normal (bootdelay); +#endif +}#endif /* CONFIG_BOOTDELAY */ /*
include/common.h +0 -3
@@ -310,9 +310,6 @@ int readline_into_buffer(const char *const prompt, char *buffer,int parse_line (char *,char *[]);void init_cmd_timeout (void );void reset_cmd_timeout (void ); -#ifdef CONFIG_MENU -int abortboot (int bootdelay); -#endif extern char console_buffer[];/* arch/$(ARCH)/lib/board.c */
Signature · 1 line
1.8.2.1
PATCH v4 3/9 main: Separate out the two abortboot() functions
Quoted 10 lines · Simon Glass
There are two implementations of
abortboot(). Turn these into two separate functions, and create a singleabortboot()which calls either one or the other.Also it seems that nothing uses
abortboot()outside main, so make it static.At this point there is no further use of
CONFIG_MENUinmain.c.Signed-off-by Simon Glass <[email protected]>
PATCH v4 4/9 main: Move boot_delay code into its own function
In reply to Simon GlassMove this code into its own function, since it clutters up main_loop().
---
Changes in v4:
- Make change without using autoconf
Changes in v3: None
common/main.c | 137 ++++++++++++++++++++++++++++++---------------------------- 1 file changed, 70 insertions(+), 67 deletions(-)
common/main.c +70 -67
@@ -341,27 +341,14 @@ static void process_fdt_options(const void *blob) }#endif /* CONFIG_OF_CONTROL */ - -/****************************************************************************/ - -void main_loop (void ) +#ifdef CONFIG_BOOTDELAY +static void process_boot_delay (void ) { -#ifndef CONFIG_SYS_HUSH_PARSER -static char lastcommand[CONFIG_SYS_CBSIZE ] = {0 , }; -int len; -int rc =1 ; -int flag; -#endif -#if defined(CONFIG_BOOTDELAY ) && defined(CONFIG_OF_CONTROL ) +#ifdef CONFIG_OF_CONTROL char *env;#endif -#if defined(CONFIG_BOOTDELAY )char *s;int bootdelay; -#endif -#ifdef CONFIG_PREBOOT -char *p; -#endif #ifdef CONFIG_BOOTCOUNT_LIMIT unsigned long bootcount =0 ;unsigned long bootlimit =0 ;
@@ -369,8 +356,6 @@ void main_loop (void)char bcs_set[16 ];#endif /* CONFIG_BOOTCOUNT_LIMIT */ -bootstage_mark_name (BOOTSTAGE_ID_MAIN_LOOP ,"main_loop" ); -#ifdef CONFIG_BOOTCOUNT_LIMIT bootcount =bootcount_load (); bootcount++;
@@ -381,50 +366,6 @@ void main_loop (void) bootlimit = bcs ?simple_strtoul (bcs,NULL ,10 ) :0 ;#endif /* CONFIG_BOOTCOUNT_LIMIT */ -#ifdef CONFIG_MODEM_SUPPORT -debug ("DEBUG: main_loop: do_mdm_init=%d\n" , do_mdm_init); -if (do_mdm_init) { -char *str =strdup (getenv ("mdm_cmd" )); -setenv ("preboot" , str);/* set or delete definition */ -if (str !=NULL ) -free (str); -mdm_init ();/* wait for modem connection */ - } -#endif /* CONFIG_MODEM_SUPPORT */ - -#ifdef CONFIG_VERSION_VARIABLE - { -setenv ("ver" , version_string);/* set version variable */ - } -#endif /* CONFIG_VERSION_VARIABLE */ - -#ifdef CONFIG_SYS_HUSH_PARSER -u_boot_hush_start (); -#endif - -#if defined(CONFIG_HUSH_INIT_VAR ) -hush_init_var (); -#endif - -#ifdef CONFIG_PREBOOT -if ((p =getenv ("preboot" )) !=NULL ) { -# ifdef CONFIG_AUTOBOOT_KEYED -int prev =disable_ctrlc (1 );/* disable Control C checking */ -# endif - -run_command_list (p,-1 ,0 ); - -# ifdef CONFIG_AUTOBOOT_KEYED -disable_ctrlc (prev);/* restore Control C checking */ -# endif - } -#endif /* CONFIG_PREBOOT */ - -#if defined(CONFIG_UPDATE_TFTP ) -update_tftp (0UL ); -#endif /* CONFIG_UPDATE_TFTP */ - -#if defined(CONFIG_BOOTDELAY ) s =getenv ("bootdelay" ); bootdelay = s ? (int )simple_strtol (s,NULL ,10 ) :CONFIG_BOOTDELAY ;
@@ -473,26 +414,88 @@ void main_loop (void)debug ("### main_loop: bootcmd=\"%s\"\n" , s ? s :"<UNDEFINED>" );if (bootdelay !=-1 && s && !abortboot (bootdelay)) { -# ifdef CONFIG_AUTOBOOT_KEYED +#ifdef CONFIG_AUTOBOOT_KEYED int prev =disable_ctrlc (1 );/* disable Control C checking */ -# endif +#endif run_command_list (s,-1 ,0 ); -# ifdef CONFIG_AUTOBOOT_KEYED +#ifdef CONFIG_AUTOBOOT_KEYED disable_ctrlc (prev);/* restore Control C checking */ -# endif +#endif } -# ifdef CONFIG_MENUKEY +#ifdef CONFIG_MENUKEY if (menukey ==CONFIG_MENUKEY ) { s =getenv ("menucmd" );if (s)run_command_list (s,-1 ,0 ); }#endif /* CONFIG_MENUKEY */ +}#endif /* CONFIG_BOOTDELAY */ +void main_loop (void ) +{ +#ifndef CONFIG_SYS_HUSH_PARSER +static char lastcommand[CONFIG_SYS_CBSIZE ] = {0 , }; +int len; +int rc =1 ; +int flag; +#endif +#ifdef CONFIG_PREBOOT +char *p; +#endif + +bootstage_mark_name (BOOTSTAGE_ID_MAIN_LOOP ,"main_loop" ); + +#ifdef CONFIG_MODEM_SUPPORT +debug ("DEBUG: main_loop: do_mdm_init=%d\n" , do_mdm_init); +if (do_mdm_init) { +char *str =strdup (getenv ("mdm_cmd" )); +setenv ("preboot" , str);/* set or delete definition */ +if (str !=NULL ) +free (str); +mdm_init ();/* wait for modem connection */ + } +#endif /* CONFIG_MODEM_SUPPORT */ + +#ifdef CONFIG_VERSION_VARIABLE + { +setenv ("ver" , version_string);/* set version variable */ + } +#endif /* CONFIG_VERSION_VARIABLE */ + +#ifdef CONFIG_SYS_HUSH_PARSER +u_boot_hush_start (); +#endif + +#if defined(CONFIG_HUSH_INIT_VAR ) +hush_init_var (); +#endif + +#ifdef CONFIG_PREBOOT + p =getenv ("preboot" ); +if (p !=NULL ) { +# ifdef CONFIG_AUTOBOOT_KEYED +int prev =disable_ctrlc (1 );/* disable Control C checking */ +# endif + +run_command_list (p,-1 ,0 ); + +# ifdef CONFIG_AUTOBOOT_KEYED +disable_ctrlc (prev);/* restore Control C checking */ +# endif + } +#endif /* CONFIG_PREBOOT */ + +#if defined(CONFIG_UPDATE_TFTP ) +update_tftp (0UL ); +#endif /* CONFIG_UPDATE_TFTP */ + +#ifdef CONFIG_BOOTDELAY +process_boot_delay (); +#endif /* * Main Loop for Monitor Command Processing */
Signature · 1 line
1.8.2.1
PATCH v4 5/9 main: Use get/setenv_ulong()
In reply to Simon GlassThese functions are now available, so use them to avoid extra code here.
---
Changes in v4: None
Changes in v3: None
common/main.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
common/main.c +2 -6
@@ -352,18 +352,14 @@ static void process_boot_delay(void)#ifdef CONFIG_BOOTCOUNT_LIMIT unsigned long bootcount =0 ;unsigned long bootlimit =0 ; -char *bcs; -char bcs_set[16 ];#endif /* CONFIG_BOOTCOUNT_LIMIT */ #ifdef CONFIG_BOOTCOUNT_LIMIT bootcount =bootcount_load (); bootcount++;bootcount_store (bootcount); -sprintf (bcs_set,"%lu" , bootcount); -setenv ("bootcount" , bcs_set); - bcs =getenv ("bootlimit" ); - bootlimit = bcs ?simple_strtoul (bcs,NULL ,10 ) :0 ; +setenv_ulong ("bootcount" , bootcount); + bootlimit =getenv_ulong ("bootlimit" ,10 ,0 );#endif /* CONFIG_BOOTCOUNT_LIMIT */ s =getenv ("bootdelay" );
Signature · 1 line
1.8.2.1
PATCH v4 6/9 main: Fix typos and checkpatch warnings in command line reading
In reply to Simon GlassThere are a few over-long lines and other checkpatch problems in this area of the code. Prepare the ground for the next patch by tidying these up.
---
Changes in v4: None
Changes in v3:
- Separate out checkpatch fixes in command line reading code into new patch
common/main.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
common/main.c +11 -11
@@ -1078,20 +1078,20 @@ int readline_into_buffer(const char *const prompt, char *buffer, int timeout)* Special character handling */ switch (c) { -case '\r' :/* Enter */ +case '\r' :/* Enter */ case '\n' : *p ='\0' ;puts ("\r\n" ); -return (p - p_buf); +return p - p_buf; -case '\0' :/* nul */ +case '\0' :/* nul */ continue ; -case 0x03 :/* ^C - break */ +case 0x03 :/* ^C - break */ p_buf[0 ] ='\0' ;/* discard input */ -return (-1 ); +return -1 ; -case 0x15 :/* ^U - erase line */ +case 0x15 :/* ^U - erase line */ while (col > plen) {puts (erase_seq); --col;
@@ -1100,15 +1100,15 @@ int readline_into_buffer(const char *const prompt, char *buffer, int timeout) n =0 ;continue ; -case 0x17 :/* ^W - erase word */ +case 0x17 :/* ^W - erase word */ p=delete_char (p_buf, p, &col, &n, plen);while ((n >0 ) && (*p !=' ' )) { p=delete_char (p_buf, p, &col, &n, plen); }continue ; -case 0x08 :/* ^H - backspace */ -case 0x7F :/* DEL - backspace */ +case 0x08 :/* ^H - backspace */ +case 0x7F :/* DEL - backspace */ p=delete_char (p_buf, p, &col, &n, plen);continue ;
@@ -1117,7 +1117,7 @@ int readline_into_buffer(const char *const prompt, char *buffer, int timeout)* Must be a normal character then */ if (n <CONFIG_SYS_CBSIZE -2 ) { -if (c =='\t' ) {/* expand TABs */ +if (c =='\t' ) {/* expand TABs */ #ifdef CONFIG_AUTO_COMPLETE /* if auto completion triggered just continue */ *p ='\0' ;
@@ -1132,7 +1132,7 @@ int readline_into_buffer(const char *const prompt, char *buffer, int timeout)char buf[2 ];/* -* Echo input using puts() to force am +* Echo input using puts() to force an * LCD flush if we are using an LCD */ ++col;
Signature · 1 line
1.8.2.1
PATCH v4 7/9 main: Correct header order
In reply to Simon GlassThe headers are a bit out of order, so fix them.
---
Changes in v4:
- Rebase without autoconf changes
Changes in v3: None
common/main.c | 19 ++++--------------- 1 file changed, 4 insertions(+), 15 deletions(-)
common/main.c +4 -15
@@ -28,26 +28,15 @@/* #define DEBUG */ #include <common.h> -#include <watchdog.h> #include <command.h> #include <fdtdec.h> -#include <malloc.h> -#include <version.h> -#ifdef CONFIG_MODEM_SUPPORT -#include <malloc.h> /* for free() prototype */ -#endif - -#ifdef CONFIG_SYS_HUSH_PARSER #include <hush.h> -#endif - -#ifdef CONFIG_OF_CONTROL -#include <fdtdec.h> -#endif - +#include <malloc.h> +#include <menu.h> #include <post.h> +#include <version.h> +#include <watchdog.h> #include <linux/ctype.h> -#include <menu.h> DECLARE_GLOBAL_DATA_PTR ;
Signature · 1 line
1.8.2.1
PATCH v4 8/9 main: Add debug_parser() to avoid #ifdefs
In reply to Simon GlassDefine a simple debug condition at the top of the file, to avoid using lots of #ifdefs later on.
---
Changes in v4: None
Changes in v3: None
common/main.c | 58 +++++++++++++++++++++++----------------------------------- 1 file changed, 23 insertions(+), 35 deletions(-)
common/main.c +23 -35
@@ -48,7 +48,11 @@ void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progre#define MAX_DELAY_STOP_STR 32 -#undef DEBUG_PARSER +#define DEBUG_PARSER 0/* set to 1 to debug */ + +#define debug_parser(fmt, args...) \ + debug_cond(DEBUG_PARSER, fmt, ##args) +char console_buffer[CONFIG_SYS_CBSIZE +1 ];/* console I/O buffer */
@@ -1179,9 +1183,7 @@ int parse_line (char *line, char *argv[]) {int nargs =0 ; -#ifdef DEBUG_PARSER -printf ("parse_line: \"%s\"\n" , line); -#endif +debug_parser ("parse_line: \"%s\"\n" , line);while (nargs <CONFIG_SYS_MAXARGS ) {/* skip any white space */
@@ -1190,10 +1192,8 @@ int parse_line (char *line, char *argv[])if (*line =='\0' ) {/* end of line, no more args */ argv[nargs] =NULL ; -#ifdef DEBUG_PARSER -printf ("parse_line: nargs=%d\n" , nargs); -#endif -return (nargs); +debug_parser ("parse_line: nargs=%d\n" , nargs); +return nargs; } argv[nargs++] = line;/* begin of argument string */
@@ -1204,10 +1204,8 @@ int parse_line (char *line, char *argv[])if (*line =='\0' ) {/* end of line, no more args */ argv[nargs] =NULL ; -#ifdef DEBUG_PARSER -printf ("parse_line: nargs=%d\n" , nargs); -#endif -return (nargs); +debug_parser ("parse_line: nargs=%d\n" , nargs); +return nargs; } *line++ ='\0' ;/* terminate current arg */
@@ -1215,9 +1213,7 @@ int parse_line (char *line, char *argv[])printf ("** Too many args (max. %d) **\n" ,CONFIG_SYS_MAXARGS ); -#ifdef DEBUG_PARSER -printf ("parse_line: nargs=%d\n" , nargs); -#endif +debug_parser ("parse_line: nargs=%d\n" , nargs);return (nargs); }
@@ -1235,12 +1231,10 @@ static void process_macros (const char *input, char *output)/* 1 = waiting for '(' or '{' */ /* 2 = waiting for ')' or '}' */ /* 3 = waiting for ''' */ -#ifdef DEBUG_PARSER char *output_start = output; -printf ("[PROCESS_MACROS] INPUT len %d: \"%s\"\n" ,strlen (input), - input); -#endif +debug_parser ("[PROCESS_MACROS] INPUT len %zd: \"%s\"\n" ,strlen (input), + input); prev ='\0' ;/* previous character */
@@ -1328,10 +1322,8 @@ static void process_macros (const char *input, char *output)else *(output -1 ) =0 ; -#ifdef DEBUG_PARSER -printf ("[PROCESS_MACROS] OUTPUT len %d: \"%s\"\n" , -strlen (output_start), output_start); -#endif +debug_parser ("[PROCESS_MACROS] OUTPUT len %zd: \"%s\"\n" , +strlen (output_start), output_start); }/****************************************************************************
@@ -1362,12 +1354,12 @@ static int builtin_run_command(const char *cmd, int flag)int repeatable =1 ;int rc =0 ; -#ifdef DEBUG_PARSER -printf ("[RUN_COMMAND] cmd[%p]=\"" , cmd); -puts (cmd ? cmd :"NULL" );/* use puts - string may be loooong */ -puts ("\"\n" ); -#endif - +debug_parser ("[RUN_COMMAND] cmd[%p]=\"" , cmd); +if (DEBUG_PARSER ) { +/* use puts - string may be loooong */ +puts (cmd ? cmd :"NULL" ); +puts ("\"\n" ); + }clear_ctrlc ();/* forget any previous Control C */ if (!cmd || !*cmd) {
@@ -1385,9 +1377,7 @@ static int builtin_run_command(const char *cmd, int flag)* repeatable commands */ -#ifdef DEBUG_PARSER -printf ("[PROCESS_SEPARATORS] %s\n" , cmd); -#endif +debug_parser ("[PROCESS_SEPARATORS] %s\n" , cmd);while (*str) {/*
@@ -1416,9 +1406,7 @@ static int builtin_run_command(const char *cmd, int flag) }else str = sep;/* no more commands for next pass */ -#ifdef DEBUG_PARSER -printf ("token: \"%s\"\n" , token); -#endif +debug_parser ("token: \"%s\"\n" , token);/* find macros in this token and replace them */ process_macros (token, finaltoken);
Signature · 1 line
1.8.2.1
PATCH v4 9/9 main: Add debug_bootkeys to avoid #ifdefs
In reply to Simon GlassDefine a simple debug condition at the top of the file, to avoid using lots of #ifdefs later on.
---
Changes in v4: None
Changes in v3: None
common/main.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
common/main.c +12 -12
@@ -53,6 +53,11 @@ void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progre #define debug_parser(fmt, args...) \ debug_cond(DEBUG_PARSER, fmt, ##args) +#ifndef DEBUG_BOOTKEYS +#define DEBUG_BOOTKEYS 0 +#endif +#define debug_bootkeys(fmt, args...) \ + debug_cond(DEBUG_BOOTKEYS, fmt, ##args)char console_buffer[CONFIG_SYS_CBSIZE +1 ];/* console I/O buffer */
@@ -138,11 +143,9 @@ static int abortboot_keyed(int bootdelay) presskey_max = presskey_max > delaykey[i].len ? presskey_max : delaykey[i].len; -# if DEBUG_BOOTKEYS -printf ("%s key:<%s>\n" , - delaykey[i].retry ?"delay" :"stop" , - delaykey[i].str ? delaykey[i].str :"NULL" ); -# endif +debug_bootkeys ("%s key:<%s>\n" , + delaykey[i].retry ?"delay" :"stop" , + delaykey[i].str ? delaykey[i].str :"NULL" ); }/* In order to keep up with incoming data, check timeout only
@@ -167,10 +170,9 @@ static int abortboot_keyed(int bootdelay) memcmp (presskey + presskey_len - delaykey[i].len, delaykey[i].str, delaykey[i].len) == 0) { -# if DEBUG_BOOTKEYS -printf ("got %skey\n" , - delaykey[i].retry ?"delay" :"stop" ); -# endif +debug_bootkeys ("got %skey\n" , + delaykey[i].retry ?"delay" : +"stop" );# ifdef CONFIG_BOOT_RETRY_TIME /* don't retry auto boot */
@@ -182,10 +184,8 @@ static int abortboot_keyed(int bootdelay) } }while (!abort &&get_ticks () <= etime); -# if DEBUG_BOOTKEYS if (!abort) -puts ("key timeout\n" ); -# endif +debug_bootkeys ("key timeout\n" );#ifdef CONFIG_SILENT_CONSOLE if (abort)
Signature · 1 line
1.8.2.1
PATCH v4 1/9 at91: Correct CONFIG_AUTOBOOT_PROMPT definition for pm9263
In reply to Simon GlassHi Simon,
Quoted 5 lines · Simon Glass
This is not currently used, since autoboot is not enabled for this board, but the string is missing a parameter. Add it.
Signed-off-by Simon Glass <[email protected]>
Quoted 21 lines
---
Changes in v4: None
Changes in v3: Noneinclude/configs/pm9263.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)include/configs/pm9263.h +1
-1@@ -355,7 +355,7 @@#define CONFIG_BOOTCOMMAND "run flashboot"#define CONFIG_ROOTPATH "/ronetix/rootfs" -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" +#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n", bootdelay#define CONFIG_CON_ROT "fbcon=rotate:3 "#define CONFIG_BOOTARGS "root=/dev/mtdblock4 rootfstype=jffs2 "\
PATCH v4 1/9 at91: Correct CONFIG_AUTOBOOT_PROMPT definition for pm9263
In reply to Simon GlassQuoted 5 lines · Simon Glass
This is not currently used, since autoboot is not enabled for this board, but the string is missing a parameter. Add it.
Signed-off-by Simon Glass <[email protected]>
Along with the rest of the series, applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20130605/0f417369/attachment.pgp>