cifs-utils VFS errors
Subsystems (2)
Hi
I have a s3 fileserver joined to a s4 DC
Here is smb.conf on the fileserver:
[global]
workgroup = HH3
realm = HH3.SITE
security = ADS
kerberos method = system keytab
winbind enum users = Yes
winbind enum groups = Yes
idmap config *:backend = tdb
idmap config *:range = 3000-4000
idmap config HH3:backend = ad
idmap config HH3:range = 20000-40000000
idmap config HH3:schema_mode = rfc2307
winbind nss info = rfc2307
winbind expand groups = 2
winbind nested groups = yes
winbind use default domain = Yes
[users]
path = /home/users
read only = No
getent passwd works fine and shows AD users. But cifs mount fails:
sudo mount -t cifs //oliva/users --verbose /mnt -osec=krb5
mount.cifs kernel mount options: ip=127.0.0.1,unc=\\oliva \users,sec=krb5,user=root,pass=********
mount error(13): Permission denied
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
the log gives:
May 26 12:35:05 oliva cifs.upcall: key description: cifs.spnego;0;0;39010000;ver=0x2;host=oliva;ip4=127.0.0.1;sec=krb5;uid=0x0;creduid=0x0;user=root;pid=0x6f3 May 26 12:35:05 oliva cifs.upcall: ver=2 May 26 12:35:05 oliva cifs.upcall: host=oliva May 26 12:35:05 oliva cifs.upcall: ip=127.0.0.1 May 26 12:35:05 oliva cifs.upcall: sec=1 May 26 12:35:05 oliva cifs.upcall: uid=0 May 26 12:35:05 oliva cifs.upcall: creduid=0 May 26 12:35:05 oliva cifs.upcall: user=root May 26 12:35:05 oliva cifs.upcall: pid=1779 May 26 12:35:05 oliva cifs.upcall: find_krb5_cc: considering /tmp/krb5cc_0 May 26 12:35:05 oliva cifs.upcall: find_krb5_cc: FILE:/tmp/krb5cc_0 is valid ccache May 26 12:35:05 oliva cifs.upcall: handle_krb5_mech: getting service ticket for oliva May 26 12:35:05 oliva cifs.upcall: handle_krb5_mech: obtained service ticket May 26 12:35:05 oliva kernel: [ 612.342045] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE May 26 12:35:05 oliva kernel: [ 612.342109] CIFS VFS: Send error in SessSetup = -13 May 26 12:35:05 oliva kernel: [ 612.343323] CIFS VFS: cifs_mount failed
w/return code = -13
smbd fails with this:
Maximum core file size limits now 16777216(soft) -1(hard)
smbd version 3.6.9 started.
Copyright Andrew Tridgell and the Samba Team 1992-2011
uid=0 gid=0 euid=0 egid=0lp_load_ex: refreshing parameters
Initialising global parametersrlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
Registered MSG_REQ_POOL_USAGE
Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGEDlp_load_ex: refreshing parameters
Initialising global parametersrlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
Processing section "[users]"
adding IPC service
added interface eth0 ip=fe80::a00:27ff:fe7c:2d50%eth0 bcast=fe80::ffff:ffff:ffff:ffff%eth0 netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=192.168.1.110 bcast=192.168.1.255 netmask=255.255.255.0
loaded services
Initialise the svcctl registry keys if needed.
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Initialise the eventlog registry keys if needed.
Closed policyget_dc_list: preferred server list: "hh16.hh3.site, *" Successfully contacted LDAP server 192.168.1.16get_dc_list: preferred server list: "hh16.hh3.site, *"get_dc_list: preferred server list: "hh16.hh3.site, *" Successfully contacted LDAP server 192.168.1.16
Connected to LDAP server hh16.hh3.siteads_sasl_spnego_bind: got OID=1.2.840.48018.1.2.2ads_sasl_spnego_bind: got OID=1.2.840.113554.1.2.2ads_sasl_spnego_bind: got OID=1.3.6.1.4.1.311.2.2.10ads_sasl_spnego_bind: got server principal name = not_defined_in_RFC4178@please_ignoreads_krb5_mk_req: krb5_cc_get_principal failed (No credentials cache found)ads_cleanup_expired_creds: Ticket in ccache[MEMORY:prtpub_cache] expiration dom, 26 may 2013 22:46:04 CESTads_krb5_mk_req: server marked as OK to delegate to, building forwardable TGT
reloading printcap cache
reload status: ok
waiting for connections
Unable to connect to CUPS server localhost:631 - Transport endpoint is not connected
failed to retrieve printer list: NT_STATUS_UNSUCCESSFUL
Could not find child 1808 -- ignoring
Allowed connection from 127.0.0.1 (127.0.0.1)init_oplocks: initializing messages.
Linux kernel oplocks enabled
Transaction 0 of length 82 (0 toread)
switch message SMBnegprot (pid 1807) conn 0x0
Requested protocol [LM1.2X002]
Requested protocol [LANMAN2.1]
Requested protocol [NT LM 0.12]
Requested protocol [POSIX 2]
using SPNEGO
Selected protocol NT LM 0.12
Transaction 1 of length 1450 (0 toread)
switch message SMBsesssetupX (pid 1807) conn 0x0
wct=12 flg2=0xd801setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
Doing spnego session setup
NativeOS=[Linux version 3.8.0-22-generic] NativeLanMan=[CIFS VFS Client for Linux] PrimaryDomain=[]reply_spnego_negotiate: Got secblob of size 1227 libads/kerberos_verify.c:267: krb5_rd_req_return_keyblock_from_keytab succeeded for principal host/oliva.hh3.site-UiqEU/[email protected] Found account name from PAC: Administrator []
Kerberos ticket principal name is [Administrator-UiqEU/[email protected]] Username HH3\Administrator is invalid on this system
error packet at smbd/sesssetup.c(359) cmd=115 (SMBsesssetupX) NT_STATUS_LOGON_FAILURE
Server exit (failed to receive smb request)
Anyone please? In particular, why ntlm authentication? Why Username HH3 \Administrator is invalid on this system? I've tried without winbind use default domain = but nada.
Cheers,
Steve
A message that is not in the archive (sent off-list or not yet received): 51A32117.5030908-dZ4O0aZtNmBWk0Htik3J/[email protected]
Quoted 51 lines · On Mon, 27 May 2013 11:02:15 +0200 steve…
Hi
I have a s3 fileserver joined to a s4 DC
Here is smb.conf on the fileserver:
[global]
workgroup = HH3
realm = HH3.SITE
security = ADS
kerberos method = system keytab
winbind enum users = Yes
winbind enum groups = Yes
idmap config *:backend = tdb
idmap config *:range = 3000-4000
idmap config HH3:backend = ad
idmap config HH3:range = 20000-40000000
idmap config HH3:schema_mode = rfc2307
winbind nss info = rfc2307
winbind expand groups = 2
winbind nested groups = yes
winbind use default domain = Yes[users]
path =/home/users
read only = Nogetent passwd works fine and shows AD users. But cifs mount fails:
sudo mount -t cifs //oliva/users --verbose /mnt -osec=krb5
mount.cifs kernel mount options: ip=127.0.0.1,unc=\\oliva \users,sec=krb5,user=root,pass=********
mount error(13): Permission denied
Refer to themount.cifs(8)manual page (e.g. man mount.cifs)the log gives:
May 26 12:35:05 oliva cifs.upcall: key description: cifs.spnego;0;0;39010000;ver=0x2;host=oliva;ip4=127.0.0.1;sec=krb5;uid=0x0;creduid=0x0;user=root;pid=0x6f3 May 26 12:35:05 oliva cifs.upcall: ver=2 May 26 12:35:05 oliva cifs.upcall: host=oliva May 26 12:35:05 oliva cifs.upcall: ip=127.0.0.1 May 26 12:35:05 oliva cifs.upcall: sec=1 May 26 12:35:05 oliva cifs.upcall: uid=0 May 26 12:35:05 oliva cifs.upcall: creduid=0 May 26 12:35:05 oliva cifs.upcall: user=root May 26 12:35:05 oliva cifs.upcall: pid=1779 May 26 12:35:05 oliva cifs.upcall: find_krb5_cc: considering /tmp/krb5cc_0 May 26 12:35:05 oliva cifs.upcall: find_krb5_cc: FILE:/tmp/krb5cc_0 is valid ccache May 26 12:35:05 oliva cifs.upcall: handle_krb5_mech: getting service ticket for oliva May 26 12:35:05 oliva cifs.upcall: handle_krb5_mech: obtained service ticket May 26 12:35:05 oliva kernel: [ 612.342045] Status code returned
Quoted 1 line
0xc000006dNT_STATUS_LOGON_FAILURE
Looks like the server doesn't like your ticket.
Quoted 98 lines
May 26 12:35:05 oliva kernel: [ 612.342109] CIFS VFS: Send error in SessSetup = -13 May 26 12:35:05 oliva kernel: [ 612.343323] CIFS VFS: cifs_mount failedw/return code = -13
smbd fails with this:
Maximum core file size limits now 16777216(soft) -1(hard)
smbd version 3.6.9 started.
Copyright Andrew Tridgell and the Samba Team 1992-2011
uid=0 gid=0 euid=0 egid=0lp_load_ex: refreshing parameters
Initialising global parametersrlimit_max: increasingrlimit_max(1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
RegisteredMSG_REQ_POOL_USAGE
RegisteredMSG_REQ_DMALLOC_MARKandLOG_CHANGEDlp_load_ex: refreshing parameters
Initialising global parametersrlimit_max: increasingrlimit_max(1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
Processing section "[users]"
adding IPC service
added interface eth0 ip=fe80::a00:27ff:fe7c:2d50%eth0 bcast=fe80::ffff:ffff:ffff:ffff%eth0 netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=192.168.1.110 bcast=192.168.1.255 netmask=255.255.255.0
loaded services
Initialise the svcctl registry keys if needed.
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Initialise the eventlog registry keys if needed.
Closed policyget_dc_list: preferred server list: "hh16.hh3.site, *" Successfully contacted LDAP server 192.168.1.16get_dc_list: preferred server list: "hh16.hh3.site, *"get_dc_list: preferred server list: "hh16.hh3.site, *" Successfully contacted LDAP server 192.168.1.16
Connected to LDAP server hh16.hh3.siteads_sasl_spnego_bind: got OID=1.2.840.48018.1.2.2ads_sasl_spnego_bind: got OID=1.2.840.113554.1.2.2ads_sasl_spnego_bind: got OID=1.3.6.1.4.1.311.2.2.10ads_sasl_spnego_bind: got server principal name = not_defined_in_RFC4178@please_ignoreads_krb5_mk_req:krb5_cc_get_principalfailed (No credentials cache found)ads_cleanup_expired_creds: Ticket in ccache[MEMORY:prtpub_cache] expiration dom, 26 may 2013 22:46:04 CESTads_krb5_mk_req: server marked as OK to delegate to, building forwardable TGT
reloading printcap cache
reload status: ok
waiting for connections
Unable to connect to CUPS server localhost:631 - Transport endpoint is not connected
failed to retrieve printer list:NT_STATUS_UNSUCCESSFUL
Could not find child 1808 -- ignoring
Allowed connection from 127.0.0.1 (127.0.0.1)init_oplocks: initializing messages.
Linux kernel oplocks enabled
Transaction 0 of length 82 (0 toread)
switch message SMBnegprot (pid 1807) conn0x0
Requested protocol [LM1.2X002]
Requested protocol [LANMAN2.1]
Requested protocol [NT LM 0.12]
Requested protocol [POSIX 2]
using SPNEGO
Selected protocol NT LM 0.12
Transaction 1 of length 1450 (0 toread)
switch message SMBsesssetupX (pid 1807) conn0x0
wct=12 flg2=0xd801setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
Doing spnego session setup
NativeOS=[Linux version 3.8.0-22-generic] NativeLanMan=[CIFS VFS Client for Linux] PrimaryDomain=[]reply_spnego_negotiate: Got secblob of size 1227libads/kerberos_verify.c:267:krb5_rd_req_return_keyblock_from_keytabsucceeded for principal host/oliva.hh3.site-UiqEU/[email protected] Found account name from PAC: Administrator []
Kerberos ticket principal name is [Administrator-UiqEU/[email protected]] Username HH3\Administrator is invalid on this system
error packet at smbd/sesssetup.c(359) cmd=115 (SMBsesssetupX)NT_STATUS_LOGON_FAILURE
Server exit (failed to receive smb request)
Quoted 4 lines
Anyone please? In particular, why ntlm authentication? Why Username HH3 \Administrator is invalid on this system? I've tried without winbind use default domain = but nada.
I'm not sure I understand the question about NTLM auth. It doesn't look like it's being used here.
As far as why Administrator is being rejected, that's probaly a better question for one of the samba lists. If I had to guess though, maybe Samba doesn't know how to map Administrator to a local unix user on the server?
Signature · 1 line
Jeff Layton <[email protected]>
A message that is not in the archive (sent off-list or not yet received): 20130528063525.1baeac8c-4QP7MXygkU+dMjc06nkz3ljfA9RmPOcC@public.gmane.org
Quoted 161 lines · Jeff Layton
Quoted 51 lines · On Mon, 27 May 2013 11:02:15 +0200 steve…
Hi
I have a s3 fileserver joined to a s4 DC
Here is smb.conf on the fileserver:
[global]
workgroup = HH3
realm = HH3.SITE
security = ADS
kerberos method = system keytab
winbind enum users = Yes
winbind enum groups = Yes
idmap config *:backend = tdb
idmap config *:range = 3000-4000
idmap config HH3:backend = ad
idmap config HH3:range = 20000-40000000
idmap config HH3:schema_mode = rfc2307
winbind nss info = rfc2307
winbind expand groups = 2
winbind nested groups = yes
winbind use default domain = Yes[users]
path =/home/users
read only = Nogetent passwd works fine and shows AD users. But cifs mount fails:
sudo mount -t cifs //oliva/users --verbose /mnt -osec=krb5
mount.cifs kernel mount options: ip=127.0.0.1,unc=\\oliva \users,sec=krb5,user=root,pass=********
mount error(13): Permission denied
Refer to themount.cifs(8)manual page (e.g. man mount.cifs)the log gives:
May 26 12:35:05 oliva cifs.upcall: key description: cifs.spnego;0;0;39010000;ver=0x2;host=oliva;ip4=127.0.0.1;sec=krb5;uid=0x0;creduid=0x0;user=root;pid=0x6f3 May 26 12:35:05 oliva cifs.upcall: ver=2 May 26 12:35:05 oliva cifs.upcall: host=oliva May 26 12:35:05 oliva cifs.upcall: ip=127.0.0.1 May 26 12:35:05 oliva cifs.upcall: sec=1 May 26 12:35:05 oliva cifs.upcall: uid=0 May 26 12:35:05 oliva cifs.upcall: creduid=0 May 26 12:35:05 oliva cifs.upcall: user=root May 26 12:35:05 oliva cifs.upcall: pid=1779 May 26 12:35:05 oliva cifs.upcall: find_krb5_cc: considering /tmp/krb5cc_0 May 26 12:35:05 oliva cifs.upcall: find_krb5_cc: FILE:/tmp/krb5cc_0 is valid ccache May 26 12:35:05 oliva cifs.upcall: handle_krb5_mech: getting service ticket for oliva May 26 12:35:05 oliva cifs.upcall: handle_krb5_mech: obtained service ticket May 26 12:35:05 oliva kernel: [ 612.342045] Status code returnedQuoted 1 line
0xc000006dNT_STATUS_LOGON_FAILURELooks like the server doesn't like your ticket.
Quoted 98 lines
May 26 12:35:05 oliva kernel: [ 612.342109] CIFS VFS: Send error in SessSetup = -13 May 26 12:35:05 oliva kernel: [ 612.343323] CIFS VFS: cifs_mount failedw/return code = -13
smbd fails with this:
Maximum core file size limits now 16777216(soft) -1(hard)
smbd version 3.6.9 started.
Copyright Andrew Tridgell and the Samba Team 1992-2011
uid=0 gid=0 euid=0 egid=0lp_load_ex: refreshing parameters
Initialising global parametersrlimit_max: increasingrlimit_max(1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
RegisteredMSG_REQ_POOL_USAGE
RegisteredMSG_REQ_DMALLOC_MARKandLOG_CHANGEDlp_load_ex: refreshing parameters
Initialising global parametersrlimit_max: increasingrlimit_max(1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
Processing section "[users]"
adding IPC service
added interface eth0 ip=fe80::a00:27ff:fe7c:2d50%eth0 bcast=fe80::ffff:ffff:ffff:ffff%eth0 netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=192.168.1.110 bcast=192.168.1.255 netmask=255.255.255.0
loaded services
Initialise the svcctl registry keys if needed.
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Initialise the eventlog registry keys if needed.
Closed policyget_dc_list: preferred server list: "hh16.hh3.site, *" Successfully contacted LDAP server 192.168.1.16get_dc_list: preferred server list: "hh16.hh3.site, *"get_dc_list: preferred server list: "hh16.hh3.site, *" Successfully contacted LDAP server 192.168.1.16
Connected to LDAP server hh16.hh3.siteads_sasl_spnego_bind: got OID=1.2.840.48018.1.2.2ads_sasl_spnego_bind: got OID=1.2.840.113554.1.2.2ads_sasl_spnego_bind: got OID=1.3.6.1.4.1.311.2.2.10ads_sasl_spnego_bind: got server principal name = not_defined_in_RFC4178@please_ignoreads_krb5_mk_req:krb5_cc_get_principalfailed (No credentials cache found)ads_cleanup_expired_creds: Ticket in ccache[MEMORY:prtpub_cache] expiration dom, 26 may 2013 22:46:04 CESTads_krb5_mk_req: server marked as OK to delegate to, building forwardable TGT
reloading printcap cache
reload status: ok
waiting for connections
Unable to connect to CUPS server localhost:631 - Transport endpoint is not connected
failed to retrieve printer list:NT_STATUS_UNSUCCESSFUL
Could not find child 1808 -- ignoring
Allowed connection from 127.0.0.1 (127.0.0.1)init_oplocks: initializing messages.
Linux kernel oplocks enabled
Transaction 0 of length 82 (0 toread)
switch message SMBnegprot (pid 1807) conn0x0
Requested protocol [LM1.2X002]
Requested protocol [LANMAN2.1]
Requested protocol [NT LM 0.12]
Requested protocol [POSIX 2]
using SPNEGO
Selected protocol NT LM 0.12
Transaction 1 of length 1450 (0 toread)
switch message SMBsesssetupX (pid 1807) conn0x0
wct=12 flg2=0xd801setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
Doing spnego session setup
NativeOS=[Linux version 3.8.0-22-generic] NativeLanMan=[CIFS VFS Client for Linux] PrimaryDomain=[]reply_spnego_negotiate: Got secblob of size 1227libads/kerberos_verify.c:267:krb5_rd_req_return_keyblock_from_keytabsucceeded for principal host/oliva.hh3.site-UiqEU/[email protected] Found account name from PAC: Administrator []
Kerberos ticket principal name is [Administrator-UiqEU/[email protected]] Username HH3\Administrator is invalid on this system
error packet at smbd/sesssetup.c(359) cmd=115 (SMBsesssetupX)NT_STATUS_LOGON_FAILURE
Server exit (failed to receive smb request)Quoted 4 lines
Anyone please? In particular, why ntlm authentication? Why Username HH3 \Administrator is invalid on this system? I've tried without winbind use default domain = but nada.
Quoted 8 lines
I'm not sure I understand the question about NTLM auth. It doesn't look like it's being used here.
As far as why Administrator is being rejected, that's probaly a better question for one of the samba lists. If I had to guess though, maybe Samba doesn't know how to map Administrator to a local unix user on the server?
Hi
Sorry if I'm a bit off topic but I'm sure you're right about Administrator being unknown to the filesystem.
How does this sound?
- I make a domain user called cifsuser with rfc2307 uidNumber and gidNumber:
uid=3000025(cifsuser) gid=20513(Domain Users) groups=20513(Domain Users)
- I mount like this:
sudo kinit cifsuser
mount -t cifs //oliva/users /mnt -osec=krb5
(just tried it: fine)
-I stick cifsuser in the keytab and kinit -k it in a cron every few hours or so to keep it alive.
Thanks so much for your time,
Steve
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 185 lines · On Tue, 28 May 2013 14:39:56 +0200 steve…
Quoted 161 lines · Jeff Layton
Quoted 51 lines · On Mon, 27 May 2013 11:02:15 +0200 steve…
Hi
I have a s3 fileserver joined to a s4 DC
Here is smb.conf on the fileserver:
[global]
workgroup = HH3
realm = HH3.SITE
security = ADS
kerberos method = system keytab
winbind enum users = Yes
winbind enum groups = Yes
idmap config *:backend = tdb
idmap config *:range = 3000-4000
idmap config HH3:backend = ad
idmap config HH3:range = 20000-40000000
idmap config HH3:schema_mode = rfc2307
winbind nss info = rfc2307
winbind expand groups = 2
winbind nested groups = yes
winbind use default domain = Yes[users]
path =/home/users
read only = Nogetent passwd works fine and shows AD users. But cifs mount fails:
sudo mount -t cifs //oliva/users --verbose /mnt -osec=krb5
mount.cifs kernel mount options: ip=127.0.0.1,unc=\\oliva \users,sec=krb5,user=root,pass=********
mount error(13): Permission denied
Refer to themount.cifs(8)manual page (e.g. man mount.cifs)the log gives:
May 26 12:35:05 oliva cifs.upcall: key description: cifs.spnego;0;0;39010000;ver=0x2;host=oliva;ip4=127.0.0.1;sec=krb5;uid=0x0;creduid=0x0;user=root;pid=0x6f3 May 26 12:35:05 oliva cifs.upcall: ver=2 May 26 12:35:05 oliva cifs.upcall: host=oliva May 26 12:35:05 oliva cifs.upcall: ip=127.0.0.1 May 26 12:35:05 oliva cifs.upcall: sec=1 May 26 12:35:05 oliva cifs.upcall: uid=0 May 26 12:35:05 oliva cifs.upcall: creduid=0 May 26 12:35:05 oliva cifs.upcall: user=root May 26 12:35:05 oliva cifs.upcall: pid=1779 May 26 12:35:05 oliva cifs.upcall: find_krb5_cc: considering /tmp/krb5cc_0 May 26 12:35:05 oliva cifs.upcall: find_krb5_cc: FILE:/tmp/krb5cc_0 is valid ccache May 26 12:35:05 oliva cifs.upcall: handle_krb5_mech: getting service ticket for oliva May 26 12:35:05 oliva cifs.upcall: handle_krb5_mech: obtained service ticket May 26 12:35:05 oliva kernel: [ 612.342045] Status code returnedQuoted 1 line
0xc000006dNT_STATUS_LOGON_FAILURELooks like the server doesn't like your ticket.
Quoted 98 lines
May 26 12:35:05 oliva kernel: [ 612.342109] CIFS VFS: Send error in SessSetup = -13 May 26 12:35:05 oliva kernel: [ 612.343323] CIFS VFS: cifs_mount failedw/return code = -13
smbd fails with this:
Maximum core file size limits now 16777216(soft) -1(hard)
smbd version 3.6.9 started.
Copyright Andrew Tridgell and the Samba Team 1992-2011
uid=0 gid=0 euid=0 egid=0lp_load_ex: refreshing parameters
Initialising global parametersrlimit_max: increasingrlimit_max(1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
RegisteredMSG_REQ_POOL_USAGE
RegisteredMSG_REQ_DMALLOC_MARKandLOG_CHANGEDlp_load_ex: refreshing parameters
Initialising global parametersrlimit_max: increasingrlimit_max(1024) to minimum Windows limit (16384)
params.c:pm_process() - Processing configuration file "/etc/samba/smb.conf"
Processing section "[global]"
Processing section "[users]"
adding IPC service
added interface eth0 ip=fe80::a00:27ff:fe7c:2d50%eth0 bcast=fe80::ffff:ffff:ffff:ffff%eth0 netmask=ffff:ffff:ffff:ffff::
added interface eth0 ip=192.168.1.110 bcast=192.168.1.255 netmask=255.255.255.0
loaded services
Initialise the svcctl registry keys if needed.
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Closed policy
Initialise the eventlog registry keys if needed.
Closed policyget_dc_list: preferred server list: "hh16.hh3.site, *" Successfully contacted LDAP server 192.168.1.16get_dc_list: preferred server list: "hh16.hh3.site, *"get_dc_list: preferred server list: "hh16.hh3.site, *" Successfully contacted LDAP server 192.168.1.16
Connected to LDAP server hh16.hh3.siteads_sasl_spnego_bind: got OID=1.2.840.48018.1.2.2ads_sasl_spnego_bind: got OID=1.2.840.113554.1.2.2ads_sasl_spnego_bind: got OID=1.3.6.1.4.1.311.2.2.10ads_sasl_spnego_bind: got server principal name = not_defined_in_RFC4178@please_ignoreads_krb5_mk_req:krb5_cc_get_principalfailed (No credentials cache found)ads_cleanup_expired_creds: Ticket in ccache[MEMORY:prtpub_cache] expiration dom, 26 may 2013 22:46:04 CESTads_krb5_mk_req: server marked as OK to delegate to, building forwardable TGT
reloading printcap cache
reload status: ok
waiting for connections
Unable to connect to CUPS server localhost:631 - Transport endpoint is not connected
failed to retrieve printer list:NT_STATUS_UNSUCCESSFUL
Could not find child 1808 -- ignoring
Allowed connection from 127.0.0.1 (127.0.0.1)init_oplocks: initializing messages.
Linux kernel oplocks enabled
Transaction 0 of length 82 (0 toread)
switch message SMBnegprot (pid 1807) conn0x0
Requested protocol [LM1.2X002]
Requested protocol [LANMAN2.1]
Requested protocol [NT LM 0.12]
Requested protocol [POSIX 2]
using SPNEGO
Selected protocol NT LM 0.12
Transaction 1 of length 1450 (0 toread)
switch message SMBsesssetupX (pid 1807) conn0x0
wct=12 flg2=0xd801setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
Doing spnego session setup
NativeOS=[Linux version 3.8.0-22-generic] NativeLanMan=[CIFS VFS Client for Linux] PrimaryDomain=[]reply_spnego_negotiate: Got secblob of size 1227libads/kerberos_verify.c:267:krb5_rd_req_return_keyblock_from_keytabsucceeded for principal host/oliva.hh3.site-UiqEU/[email protected] Found account name from PAC: Administrator []
Kerberos ticket principal name is [Administrator-UiqEU/[email protected]] Username HH3\Administrator is invalid on this system
error packet at smbd/sesssetup.c(359) cmd=115 (SMBsesssetupX)NT_STATUS_LOGON_FAILURE
Server exit (failed to receive smb request)Quoted 4 lines
Anyone please? In particular, why ntlm authentication? Why Username HH3 \Administrator is invalid on this system? I've tried without winbind use default domain = but nada.
Quoted 8 lines
I'm not sure I understand the question about NTLM auth. It doesn't look like it's being used here.
As far as why Administrator is being rejected, that's probaly a better question for one of the samba lists. If I had to guess though, maybe Samba doesn't know how to map Administrator to a local unix user on the server?
Hi
Sorry if I'm a bit off topic but I'm sure you're right about Administrator being unknown to the filesystem.How does this sound?
- I make a domain user called cifsuser with rfc2307 uidNumber and gidNumber:
uid=3000025(cifsuser) gid=20513(Domain Users) groups=20513(Domain Users)- I mount like this:
sudo kinit cifsuser
mount -t cifs //oliva/users /mnt -osec=krb5
(just tried it: fine)
Quoted 6 lines
-I stick cifsuser in the keytab and kinit -k it in a cron every few hours or so to keep it alive.
Thanks so much for your time,
Steve
That sounds reasonable. Assuming that you don't actually do anything on the mount as root, then you can give "cifsuser" very limited privileges here too, essentially acting as a "squashed" user like under NFS.
Also, there's no need to do this crontab stuff either. If you mount with "-o sec=krb5,username=cifsuser" then cifs.upcall will be able to just use /etc/krb5.keytab without you needing to do anything special.
Signature · 1 line
Jeff Layton <[email protected]>
A message that is not in the archive (sent off-list or not yet received): 20130528090142.36d5076e-4QP7MXygkU+dMjc06nkz3ljfA9RmPOcC@public.gmane.org
Quoted 10 lines · Jeff Layton
Quoted 1 line
That sounds reasonable. Assuming that you don't actually do anything on the mount as root, then you can give "cifsuser" very limited privileges here too, essentially acting as a "squashed" user like under NFS.
Also, there's no need to do this crontab stuff either. If you mount with "-o sec=krb5,username=cifsuser" then cifs.upcall will be able to just use
/etc/krb5.keytabwithout you needing to do anything special.
So cifsuser doesn't need loginShell nor unixHomeDirectory or any of the gecos stuff? I just tried with just posixAccount and uidNumber and gidNumber. It works under test but am I missing something? We just need cifsuser to be able to mount the share. He'll never need to do anything else.
Cheers
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 13 lines · On Tue, 28 May 2013 15:42:16 +0200 steve…
Quoted 10 lines · Jeff Layton
Quoted 1 line
That sounds reasonable. Assuming that you don't actually do anything on the mount as root, then you can give "cifsuser" very limited privileges here too, essentially acting as a "squashed" user like under NFS.
Also, there's no need to do this crontab stuff either. If you mount with "-o sec=krb5,username=cifsuser" then cifs.upcall will be able to just use
/etc/krb5.keytabwithout you needing to do anything special.
Quoted 7 lines
So cifsuser doesn't need loginShell nor unixHomeDirectory or any of the gecos stuff? I just tried with just posixAccount and uidNumber and gidNumber. It works under test but am I missing something? We just need cifsuser to be able to mount the share. He'll never need to do anything else.
Cheers
Again, better question for the samba lists, but I'd assume that the login shell and homedir don't matter since samba just needs to be able to "become" that user when accessing files, not do a full login.
Note too that unless you add "-o multiuser" then all accesses to that mount will be done with the credentials used to do the mount. Really, with kerberos auth there's little reason to use single-user mounts.
Signature · 1 line
Jeff Layton <[email protected]>
Quoted 17 lines · Jeff Layton
Quoted 10 lines
How does this sound?
- I make a domain user called cifsuser with rfc2307 uidNumber and gidNumber:
uid=3000025(cifsuser) gid=20513(Domain Users) groups=20513(Domain Users)- I mount like this:
sudo kinit cifsuser
mount -t cifs //oliva/users /mnt -osec=krb5
(just tried it: fine)Quoted 6 lines
-I stick cifsuser in the keytab and kinit -k it in a cron every few hours or so to keep it alive.
Thanks so much for your time,
Steve
Quoted 8 lines
That sounds reasonable. Assuming that you don't actually do anything on the mount as root, then you can give "cifsuser" very limited privileges here too, essentially acting as a "squashed" user like under NFS.
Also, there's no need to do this crontab stuff either. If you mount with "-o sec=krb5,username=cifsuser" then cifs.upcall will be able to just use
/etc/krb5.keytabwithout you needing to do anything special.
Hi
OK. Nearly done. I now have the automounter working:/etc/auto.users
* -fstype=cifs,rw,sec=krb5,username=cifsuser,multiuser ://oliva/users/&
It works fine except I have 2 keytabs per client.
/etc/krb5.keytab
produced by
net ads join
It contains the host/client and MACHINE$ keys
and
/etc/cifs.keytab
produced the DC and copied to the clients which contains the cifsuser keys.
Question: will cifs only look in /etc/krb5.keytab? Can I get it to look at /etc/cifs.keytab instead? OK, I can ktutil merge them but. . .
Thanks for your patience.
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 43 lines · On Wed, 29 May 2013 17:52:25 +0200 steve…
Quoted 17 lines · Jeff Layton
Quoted 10 lines
How does this sound?
- I make a domain user called cifsuser with rfc2307 uidNumber and gidNumber:
uid=3000025(cifsuser) gid=20513(Domain Users) groups=20513(Domain Users)- I mount like this:
sudo kinit cifsuser
mount -t cifs //oliva/users /mnt -osec=krb5
(just tried it: fine)Quoted 6 lines
-I stick cifsuser in the keytab and kinit -k it in a cron every few hours or so to keep it alive.
Thanks so much for your time,
SteveQuoted 8 lines
That sounds reasonable. Assuming that you don't actually do anything on the mount as root, then you can give "cifsuser" very limited privileges here too, essentially acting as a "squashed" user like under NFS.
Also, there's no need to do this crontab stuff either. If you mount with "-o sec=krb5,username=cifsuser" then cifs.upcall will be able to just use
/etc/krb5.keytabwithout you needing to do anything special.Hi
OK. Nearly done. I now have the automounter working:/etc/auto.users
* -fstype=cifs,rw,sec=krb5,username=cifsuser,multiuser ://oliva/users/&It works fine except I have 2 keytabs per client.
/etc/krb5.keytab
produced by
net ads join
It contains the host/client and MACHINE$ keys
and
/etc/cifs.keytab
produced the DC and copied to the clients which contains the cifsuser keys.
Quoted 6 lines
Question: will cifs only look in
/etc/krb5.keytab? Can I get it to look at/etc/cifs.keytabinstead? OK, I can ktutil merge them but. . .Thanks for your patience.
Yes, it currently only looks at /etc/krb5.keytab. It probably wouldn't be very hard to add a new command-line option to give it an alternate one if that helps.
I do have a question here though. Why are you bothering with the automounter at all? Why not instead just mount //oliva/users via fstab at the point where auto.users is currently mounted?
That should give you the same effect with a much smaller mount table and no automounter overhead. Something like this in /etc/fstab ought to do it:
//oliva/users /path/to/top/of/users/dir cifs sec=krb5,username=cifsuser,multiuser 0 0
Signature · 1 line
Jeff Layton <[email protected]>
A message that is not in the archive (sent off-list or not yet received): 20130529144555.595ee5a4-9yPaYZwiELC+kQycOl6kW4xkIHaj4LzF@public.gmane.org
Quoted 61 lines · Jeff Layton
Quoted 43 lines · On Wed, 29 May 2013 17:52:25 +0200 steve…
Quoted 17 lines · Jeff Layton
Quoted 10 lines
How does this sound?
- I make a domain user called cifsuser with rfc2307 uidNumber and gidNumber:
uid=3000025(cifsuser) gid=20513(Domain Users) groups=20513(Domain Users)- I mount like this:
sudo kinit cifsuser
mount -t cifs //oliva/users /mnt -osec=krb5
(just tried it: fine)Quoted 6 lines
-I stick cifsuser in the keytab and kinit -k it in a cron every few hours or so to keep it alive.
Thanks so much for your time,
SteveQuoted 8 lines
That sounds reasonable. Assuming that you don't actually do anything on the mount as root, then you can give "cifsuser" very limited privileges here too, essentially acting as a "squashed" user like under NFS.
Also, there's no need to do this crontab stuff either. If you mount with "-o sec=krb5,username=cifsuser" then cifs.upcall will be able to just use
/etc/krb5.keytabwithout you needing to do anything special.Hi
OK. Nearly done. I now have the automounter working:/etc/auto.users
* -fstype=cifs,rw,sec=krb5,username=cifsuser,multiuser ://oliva/users/&It works fine except I have 2 keytabs per client.
/etc/krb5.keytab
produced by
net ads join
It contains the host/client and MACHINE$ keys
and
/etc/cifs.keytab
produced the DC and copied to the clients which contains the cifsuser keys.Quoted 6 lines
Question: will cifs only look in
/etc/krb5.keytab? Can I get it to look at/etc/cifs.keytabinstead? OK, I can ktutil merge them but. . .Thanks for your patience.
Yes, it currently only looks at
/etc/krb5.keytab. It probably wouldn't be very hard to add a new command-line option to give it an alternate one if that helps.I do have a question here though. Why are you bothering with the automounter at all? Why not instead just mount //oliva/users via fstab at the point where auto.users is currently mounted?
Quoted 6 lines
That should give you the same effect with a much smaller mount table and no automounter overhead. Something like this in
/etc/fstabought to do it://oliva/users /path/to/top/of/users/dir cifs sec=krb5,username=cifsuser,multiuser 0 0
Hi
Without the automounter, the fileserver grinds to a halt after around 20 users connect. A lot of our hardware is around 10 years old.
Adding an option to select a different keytab for mount.cifs would be great. e.g. a bit like the -t in:
kinit -k cifsuser -t /etc/cifs.keytab
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 66 lines · On Wed, 29 May 2013 22:40:07 +0200 steve…
Quoted 65 lines · Jeff Layton
Quoted 43 lines · On Wed, 29 May 2013 17:52:25 +0200 steve…
Quoted 17 lines · Jeff Layton
Quoted 10 lines
How does this sound?
- I make a domain user called cifsuser with rfc2307 uidNumber and gidNumber:
uid=3000025(cifsuser) gid=20513(Domain Users) groups=20513(Domain Users)- I mount like this:
sudo kinit cifsuser
mount -t cifs //oliva/users /mnt -osec=krb5
(just tried it: fine)Quoted 6 lines
-I stick cifsuser in the keytab and kinit -k it in a cron every few hours or so to keep it alive.
Thanks so much for your time,
SteveQuoted 8 lines
That sounds reasonable. Assuming that you don't actually do anything on the mount as root, then you can give "cifsuser" very limited privileges here too, essentially acting as a "squashed" user like under NFS.
Also, there's no need to do this crontab stuff either. If you mount with "-o sec=krb5,username=cifsuser" then cifs.upcall will be able to just use
/etc/krb5.keytabwithout you needing to do anything special.Hi
OK. Nearly done. I now have the automounter working:/etc/auto.users
* -fstype=cifs,rw,sec=krb5,username=cifsuser,multiuser ://oliva/users/&It works fine except I have 2 keytabs per client.
/etc/krb5.keytab
produced by
net ads join
It contains the host/client and MACHINE$ keys
and
/etc/cifs.keytab
produced the DC and copied to the clients which contains the cifsuser keys.Quoted 6 lines
Question: will cifs only look in
/etc/krb5.keytab? Can I get it to look at/etc/cifs.keytabinstead? OK, I can ktutil merge them but. . .Thanks for your patience.
Yes, it currently only looks at
/etc/krb5.keytab. It probably wouldn't be very hard to add a new command-line option to give it an alternate one if that helps.I do have a question here though. Why are you bothering with the automounter at all? Why not instead just mount //oliva/users via fstab at the point where auto.users is currently mounted?
That should give you the same effect with a much smaller mount table and no automounter overhead. Something like this in
/etc/fstabought to do it:
Quoted 6 lines
Quoted 2 lines
//oliva/users /path/to/top/of/users/dir cifs sec=krb5,username=cifsuser,multiuser 0 0Hi
Without the automounter, the fileserver grinds to a halt after around 20 users connect. A lot of our hardware is around 10 years old.
None of that should matter. The cifs client aggressively shares connections, so the server should see little difference either way in how the network traffic looks whether you have multiple mounts like this or a single multiuser mount.
The only thing I can think of that would be different would be that the automounter might umount on a shorter schedule, and hence you might end up with fewer SMB sessions to the server. If that's the case though, then you're likely to see the same problems with the autofs setup eventually. You just need a particularly busy period of the machine...
In any case, if you're seeing your server grind to a halt, then I think you'd be well-advised to try to figure out why that is. autofs shouldn't really be fixing anything here.
Quoted 4 lines
Adding an option to select a different keytab for mount.cifs would be great. e.g. a bit like the -t in:
kinit -k cifsuser -t/etc/cifs.keytab
Adding such an option is reasonably trivial. Does the following patch work for you? If it does, it'll need a manpage update too.
--------------------[snip]----------------------
[PATCH] cifs.upcall: allow users to specify dedicated keytab on command-line
Currently cifs.upcall only looks at the default system keytab (/etc/krb5.keytab). It's often the case however that a dedicated keytab is desirable. Allow users to set one on the command-line.
--- cifs.upcall.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
cifs.upcall.c +6 -2
@@ -805,13 +805,14 @@ lowercase_string(char *c)static void usage (void ) { -fprintf (stderr,"Usage: %s [-k /path/to/krb5.conf] [-t] [-v] [-l] key_serial\n" , prog); +fprintf (stderr,"Usage: %s [ -d /path/to/keytab] [-k /path/to/krb5.conf] [-t] [-v] [-l] key_serial\n" , prog); }const struct option long_options[] = { {"krb5conf" ,1 ,NULL ,'k' }, {"legacy-uid" ,0 ,NULL ,'l' }, {"trust-dns" ,0 ,NULL ,'t' }, + {"dedicated-keytab" ,1 ,NULL ,'d' }, {"version" ,0 ,NULL ,'v' }, {NULL ,0 ,NULL ,0 } };
@@ -839,11 +840,14 @@ int main(const int argc, char *const argv[])openlog (prog,0 ,LOG_DAEMON ); -while ((c =getopt_long (argc, argv,"ck:ltv" , long_options,NULL )) !=-1 ) { +while ((c =getopt_long (argc, argv,"cd:k:ltv" , long_options,NULL )) !=-1 ) {switch (c) {case 'c' :/* legacy option -- skip it */ break ; +case 'd' : + keytab_name = optarg; +break ;case 't' : try_dns++;break ;
Signature · 4 lines
1.8.1.4 -- Jeff Layton <[email protected]>
A message that is not in the archive (sent off-list or not yet received): 20130608090820.1f3bb0e2-9yPaYZwiELC+kQycOl6kW4xkIHaj4LzF@public.gmane.org
Quoted 151 lines · Jeff Layton
Quoted 66 lines · On Wed, 29 May 2013 22:40:07 +0200 steve…
Quoted 65 lines · Jeff Layton
Quoted 43 lines · On Wed, 29 May 2013 17:52:25 +0200 steve…
Quoted 17 lines · Jeff Layton
Quoted 10 lines
How does this sound?
- I make a domain user called cifsuser with rfc2307 uidNumber and gidNumber:
uid=3000025(cifsuser) gid=20513(Domain Users) groups=20513(Domain Users)- I mount like this:
sudo kinit cifsuser
mount -t cifs //oliva/users /mnt -osec=krb5
(just tried it: fine)Quoted 6 lines
-I stick cifsuser in the keytab and kinit -k it in a cron every few hours or so to keep it alive.
Thanks so much for your time,
SteveQuoted 8 lines
That sounds reasonable. Assuming that you don't actually do anything on the mount as root, then you can give "cifsuser" very limited privileges here too, essentially acting as a "squashed" user like under NFS.
Also, there's no need to do this crontab stuff either. If you mount with "-o sec=krb5,username=cifsuser" then cifs.upcall will be able to just use
/etc/krb5.keytabwithout you needing to do anything special.Hi
OK. Nearly done. I now have the automounter working:/etc/auto.users
* -fstype=cifs,rw,sec=krb5,username=cifsuser,multiuser ://oliva/users/&It works fine except I have 2 keytabs per client.
/etc/krb5.keytab
produced by
net ads join
It contains the host/client and MACHINE$ keys
and
/etc/cifs.keytab
produced the DC and copied to the clients which contains the cifsuser keys.Quoted 6 lines
Question: will cifs only look in
/etc/krb5.keytab? Can I get it to look at/etc/cifs.keytabinstead? OK, I can ktutil merge them but. . .Thanks for your patience.
Yes, it currently only looks at
/etc/krb5.keytab. It probably wouldn't be very hard to add a new command-line option to give it an alternate one if that helps.I do have a question here though. Why are you bothering with the automounter at all? Why not instead just mount //oliva/users via fstab at the point where auto.users is currently mounted?
That should give you the same effect with a much smaller mount table and no automounter overhead. Something like this in
/etc/fstabought to do it:Quoted 6 lines
Quoted 2 lines
//oliva/users /path/to/top/of/users/dir cifs sec=krb5,username=cifsuser,multiuser 0 0Hi
Without the automounter, the fileserver grinds to a halt after around 20 users connect. A lot of our hardware is around 10 years old.None of that should matter. The cifs client aggressively shares connections, so the server should see little difference either way in how the network traffic looks whether you have multiple mounts like this or a single multiuser mount.
The only thing I can think of that would be different would be that the automounter might umount on a shorter schedule, and hence you might end up with fewer SMB sessions to the server. If that's the case though, then you're likely to see the same problems with the autofs setup eventually. You just need a particularly busy period of the machine...
In any case, if you're seeing your server grind to a halt, then I think you'd be well-advised to try to figure out why that is. autofs shouldn't really be fixing anything here.
Quoted 4 lines
Adding an option to select a different keytab for mount.cifs would be great. e.g. a bit like the -t in:
kinit -k cifsuser -t/etc/cifs.keytabAdding such an option is reasonably trivial. Does the following patch work for you? If it does, it'll need a manpage update too.
--------------------[snip]----------------------
[PATCH] cifs.upcall: allow users to specify dedicated keytab on command-line
Currently cifs.upcall only looks at the default system keytab (
/etc/krb5.keytab). It's often the case however that a dedicated keytab is desirable. Allow users to set one on the command-line.Signed-off-by Jeff Layton <[email protected]>--- cifs.upcall.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)cifs.upcall.c +6
-2@@ -805,13 +805,14 @@ lowercase_string(char *c)static void usage (void ) { -fprintf (stderr,"Usage: %s [-k /path/to/krb5.conf] [-t] [-v] [-l] key_serial\n" , prog); +fprintf (stderr,"Usage: %s [ -d /path/to/keytab] [-k /path/to/krb5.conf] [-t] [-v] [-l] key_serial\n" , prog); }const struct option long_options[] = { {"krb5conf" ,1 ,NULL ,'k' }, {"legacy-uid" ,0 ,NULL ,'l' }, {"trust-dns" ,0 ,NULL ,'t' }, + {"dedicated-keytab" ,1 ,NULL ,'d' }, {"version" ,0 ,NULL ,'v' }, {NULL ,0 ,NULL ,0 } };@@ -839,11 +840,14 @@ int main(const int argc, char *const argv[])openlog (prog,0 ,LOG_DAEMON ); -while ((c =getopt_long (argc, argv,"ck:ltv" , long_options,NULL )) !=-1 ) { +while ((c =getopt_long (argc, argv,"cd:k:ltv" , long_options,NULL )) !=-1 ) {switch (c) {case 'c' :/* legacy option -- skip it */ break ; +case 'd' : + keytab_name = optarg; +break ;case 't' : try_dns++;break ;Signature · 1 line
1.8.1.4
Hi
Brilliant.
I applied the patch, well, I edited cifs.upcall.c with the -'s and +'s at least. I then, make clean, build and make install. I now have:
cifs.upcall
Usage: cifs.upcall [ -d /path/to/keytab] [-k /path/to/krb5.conf] [-t] [-v] [-l] key_serial
Looks good. Where do I put the -d in:
mount -t cifs //altea/users /mnt -osec=krb5,multiuser,username=cifsuser
or don't I?
Cheers,
Steve
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 52 lines · steve
Quoted 42 lines · Jeff Layton
cifs.upcall.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)cifs.upcall.c +6
-2@@ -805,13 +805,14 @@ lowercase_string(char *c)static void usage (void ) { -fprintf (stderr,"Usage: %s [-k /path/to/krb5.conf] [-t] [-v] [-l] key_serial\n" , prog); +fprintf (stderr,"Usage: %s [ -d /path/to/keytab] [-k /path/to/krb5.conf] [-t] [-v] [-l] key_serial\n" , prog); }const struct option long_options[] = { {"krb5conf" ,1 ,NULL ,'k' }, {"legacy-uid" ,0 ,NULL ,'l' }, {"trust-dns" ,0 ,NULL ,'t' }, + {"dedicated-keytab" ,1 ,NULL ,'d' }, {"version" ,0 ,NULL ,'v' }, {NULL ,0 ,NULL ,0 } };@@ -839,11 +840,14 @@ int main(const int argc, char *const argv[])openlog (prog,0 ,LOG_DAEMON ); -while ((c =getopt_long (argc, argv,"ck:ltv" , long_options,NULL )) !=-1 ) { +while ((c =getopt_long (argc, argv,"cd:k:ltv" , long_options,NULL )) !=-1 ) {switch (c) {case 'c' :/* legacy option -- skip it */ break ; +case 'd' : + keytab_name = optarg; +break ;case 't' : try_dns++;break ;Signature · 1 line
1.8.1.4Hi
Brilliant.
I applied the patch, well, I editedcifs.upcall.cwith the -'s and +'s at least. I then, make clean, build and make install. I now have:
cifs.upcall
Usage: cifs.upcall [ -d /path/to/keytab] [-k /path/to/krb5.conf] [-t] [-v] [-l]key_serial
Quoted 5 lines
Looks good. Where do I put the -d in:
mount -t cifs //altea/users /mnt -osec=krb5,multiuser,username=cifsuser
or don't I?
Cheers,
Steve
Here is /etc/request-key.conf:
create cifs.spnego * * /usr/sbin/cifs.upcall -c %k
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 59 lines · On Sat, 08 Jun 2013 16:49:35 +0200 steve…
Quoted 52 lines · steve
Quoted 42 lines · Jeff Layton
cifs.upcall.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)cifs.upcall.c +6
-2@@ -805,13 +805,14 @@ lowercase_string(char *c)static void usage (void ) { -fprintf (stderr,"Usage: %s [-k /path/to/krb5.conf] [-t] [-v] [-l] key_serial\n" , prog); +fprintf (stderr,"Usage: %s [ -d /path/to/keytab] [-k /path/to/krb5.conf] [-t] [-v] [-l] key_serial\n" , prog); }const struct option long_options[] = { {"krb5conf" ,1 ,NULL ,'k' }, {"legacy-uid" ,0 ,NULL ,'l' }, {"trust-dns" ,0 ,NULL ,'t' }, + {"dedicated-keytab" ,1 ,NULL ,'d' }, {"version" ,0 ,NULL ,'v' }, {NULL ,0 ,NULL ,0 } };@@ -839,11 +840,14 @@ int main(const int argc, char *const argv[])openlog (prog,0 ,LOG_DAEMON ); -while ((c =getopt_long (argc, argv,"ck:ltv" , long_options,NULL )) !=-1 ) { +while ((c =getopt_long (argc, argv,"cd:k:ltv" , long_options,NULL )) !=-1 ) {switch (c) {case 'c' :/* legacy option -- skip it */ break ; +case 'd' : + keytab_name = optarg; +break ;case 't' : try_dns++;break ;Signature · 1 line
1.8.1.4Hi
Brilliant.
I applied the patch, well, I editedcifs.upcall.cwith the -'s and +'s at least. I then, make clean, build and make install. I now have:
cifs.upcall
Usage: cifs.upcall [ -d /path/to/keytab] [-k /path/to/krb5.conf] [-t] [-v] [-l]key_serialQuoted 5 lines
Looks good. Where do I put the -d in:
mount -t cifs //altea/users /mnt -osec=krb5,multiuser,username=cifsuser
or don't I?
Cheers,
Steve
Quoted 5 lines
Here is
/etc/request-key.conf:create cifs.spnego * *
/usr/sbin/cifs.upcall-c %k
Yes, you'll need to add the new argument there.
Signature · 1 line
Jeff Layton <[email protected]>
A message that is not in the archive (sent off-list or not yet received): 20130608202342.6e191950-4QP7MXygkU+dMjc06nkz3ljfA9RmPOcC@public.gmane.org
Quoted 17 lines · Jeff Layton
Quoted 14 lines · On Sat, 08 Jun 2013 16:49:35 +0200 steve…
Quoted 13 lines
Hi
Brilliant.
I applied the patch, well, I editedcifs.upcall.cwith the -'s and +'s at least. I then, make clean, build and make install. I now have:
cifs.upcall
Usage: cifs.upcall [ -d /path/to/keytab] [-k /path/to/krb5.conf] [-t] [-v] [-l]key_serialLooks good. Where do I put the -d in:
mount -t cifs //altea/users /mnt -osec=krb5,multiuser,username=cifsuser
or don't I?
Cheers,
Steve
Quoted 8 lines
Quoted 5 lines
Here is
/etc/request-key.conf:create cifs.spnego * *
/usr/sbin/cifs.upcall-c %kYes, you'll need to add the new argument there.
Hi
Here is the keytab:
klist -ke /etc/cifs.keytab
Keytab name: FILE:/etc/cifs.keytab
KVNO Principal
----
--------------------------------------------------------------------------
1 cifsuser-UiqEU/[email protected] (arcfour-hmac)
create cifs.spnego * * /usr/sbin/cifs.upcall -d /etc/cifs.keytab -c %k
Unfortunately we are back to having to have a root cache in /tmp:
mount -t cifs //altea/shared /home/shared
-osec=krb5,multiuser,username=cifsuser
mount error(126): Required key not available
/var/log/messages for the failed key:
Refer to the mount.cifs(8) manual page (e.g. man mount.cifs)
2013-06-09T10:36:34.566409+02:00 catral cifs.upcall: user=cifsuser 2013-06-09T10:36:34.580279+02:00 catral cifs.upcall: pid=1396 2013-06-09T10:36:34.587159+02:00 catral cifs.upcall: find_krb5_cc: scandir error on directory '/run/user/0': No such file or directory 2013-06-09T10:36:34.588382+02:00 catral cifs.upcall: krb5_get_init_creds_keytab: -1765328174 2013-06-09T10:36:34.595349+02:00 catral cifs.upcall: handle_krb5_mech: getting service ticket for altea 2013-06-09T10:36:34.596593+02:00 catral cifs.upcall: cifs_krb5_get_req: unable to resolve (null) to ccache 2013-06-09T10:36:34.607253+02:00 catral cifs.upcall: handle_krb5_mech: failed to obtain service ticket (-1765328245) 2013-06-09T10:36:34.608787+02:00 catral cifs.upcall: handle_krb5_mech: getting service ticket for altea.hh3.site 2013-06-09T10:36:34.612720+02:00 catral cifs.upcall: cifs_krb5_get_req: unable to resolve (null) to ccache 2013-06-09T10:36:34.614176+02:00 catral cifs.upcall: handle_krb5_mech: failed to obtain service ticket (-1765328245) 2013-06-09T10:36:34.620231+02:00 catral cifs.upcall: Unable to obtain service ticket 2013-06-09T10:36:34.621737+02:00 catral cifs.upcall: Exit status
-1765328245
If I now kinit cifsuser as root, it mounts fine:
kinit cifsuser
Password for cifsuser-UiqEU/[email protected]:
catral:/home/steve # mount -t cifs //altea/shared /home/shared
-osec=krb5,multiuser,username=cifsuser
catral:/home/steve # mount | grep altea/shared
//altea/shared on /home/shared type cifs
(rw,relatime,vers=1.0,sec=krb5,cache=strict,unc=\\altea \shared,multiuser,uid=0,noforceuid,gid=0,noforcegid,addr=192.168.1.100,unix,posixpaths,serverino,acl,noperm,rsize=1048576,wsize=65536,actimeo=1) ticket
/var/log/messages for the successful mount:
2013-06-09T10:36:34.621737+02:00 catral cifs.upcall: Exit status -1765328245 2013-06-09T10:40:06.705799+02:00 catral cifs.upcall: key description: cifs.spnego;0;0;3f000000;ver=0x2;host=altea;ip4=192.168.1.100;sec=krb5;uid=0x0;creduid=0x0;user=cifsuser;pid=0x587 2013-06-09T10:40:06.710173+02:00 catral cifs.upcall: ver=2 2013-06-09T10:40:06.721488+02:00 catral cifs.upcall: host=altea 2013-06-09T10:40:06.725720+02:00 catral cifs.upcall: ip=192.168.1.100 2013-06-09T10:40:06.733396+02:00 catral cifs.upcall: sec=1 2013-06-09T10:40:06.742668+02:00 catral cifs.upcall: uid=0 2013-06-09T10:40:06.744518+02:00 catral cifs.upcall: creduid=0 2013-06-09T10:40:06.746116+02:00 catral cifs.upcall: user=cifsuser 2013-06-09T10:40:06.747900+02:00 catral cifs.upcall: pid=1415 2013-06-09T10:40:06.749599+02:00 catral cifs.upcall: find_krb5_cc: scandir error on directory '/run/user/0': No such file or directory 2013-06-09T10:40:06.751559+02:00 catral cifs.upcall: find_krb5_cc: considering /tmp/krb5cc_0 2013-06-09T10:40:06.755205+02:00 catral cifs.upcall: find_krb5_cc: FILE:/tmp/krb5cc_0 is valid ccache 2013-06-09T10:40:06.756825+02:00 catral cifs.upcall: handle_krb5_mech: getting service ticket for altea 2013-06-09T10:40:06.758426+02:00 catral cifs.upcall: handle_krb5_mech: obtained service ticket 2013-06-09T10:40:06.760770+02:00 catral cifs.upcall: Exit status 0
It seems that cifs.upcall ignores /etc/reqestkey.conf Unless there is a root cache, nothing gets mounted. I've tested without the patch and having the key in the defaul keytab instead. The same.
This is nothing to do with the patch. cifs will not mount unless there is a root cache available no matter which keytab is used: default keytab or -d patch keytab.
Stuck.
Quoted 44 lines
Quoted 44 lines
Quoted 44 lines · Jeff Layton
Quoted 42 lines
cifs.upcall.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)cifs.upcall.c +6
-2@@ -805,13 +805,14 @@ lowercase_string(char *c)static void usage (void ) { -fprintf (stderr,"Usage: %s [-k /path/to/krb5.conf] [-t] [-v] [-l] key_serial\n" , prog); +fprintf (stderr,"Usage: %s [ -d /path/to/keytab] [-k /path/to/krb5.conf] [-t] [-v] [-l] key_serial\n" , prog); }const struct option long_options[] = { {"krb5conf" ,1 ,NULL ,'k' }, {"legacy-uid" ,0 ,NULL ,'l' }, {"trust-dns" ,0 ,NULL ,'t' }, + {"dedicated-keytab" ,1 ,NULL ,'d' }, {"version" ,0 ,NULL ,'v' }, {NULL ,0 ,NULL ,0 } };@@ -839,11 +840,14 @@ int main(const int argc, char *const argv[])openlog (prog,0 ,LOG_DAEMON ); -while ((c =getopt_long (argc, argv,"ck:ltv" , long_options,NULL )) !=-1 ) { +while ((c =getopt_long (argc, argv,"cd:k:ltv" , long_options,NULL )) !=-1 ) {switch (c) {case 'c' :/* legacy option -- skip it */ break ; +case 'd' : + keytab_name = optarg; +break ;case 't' : try_dns++;break ;Signature · 1 line
1.8.1.4
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Hi
Brilliant.
I applied the patch, well, I editedcifs.upcall.cwith the -'s and +'s at least. I then, make clean, build and make install. I now have:
cifs.upcall
Usage: cifs.upcall [ -d /path/to/keytab] [-k /path/to/krb5.conf] [-t] [-v] [-l]key_serial
Hi Jeff
Would there be any possibility of including this patch in a cifs-utils release? It's just that we're not allowed to use patched versions outside the lab.
Thanks,
Steve