Patch for thinkpad-acpi.c
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi, all:
We are testing Ubuntu 12.04 on some laptops , and find out there are some error messages in dmesg after run S3 or S4. Like:
[10512.177806] ACPI Warning: For \_SB_.PCI0.LPCB.H_EC.LED_: Excess arguments - needs 1, found 2 (20110623/nspredef-326) [11728.328110] ACPI Warning: For \_SB_.PCI0.LPCB.H_EC.LED_: Excess
arguments - needs 1, found 2 (20110623/nspredef-326)
The root cause is thinkpad-acpi.c, the LED function will trigger this message.
Because theses laptops don't have any led light, so we don't need any action for leds.
Then I make a patch for this issue:
1. Add a blacklist which include some model name and model number.
2. Add a function which name tpacpi_check_model() in thinkpad_acpi_module_i() . It will check the model name and model number during init step. If this model name is in blacklist, then set valueno_led to 1.
3. Add a condition in led_exit(),led_init(),led_read() and led_write(), if no_led is 1, then just return.
patch file no-led.patch:
- --- old/thinkpad_acpi.c 2013-01-29 16:54:34.000000000 +0800
+++ src/thinkpad_acpi.c 2013-01-29 16:52:46.000000000 +0800
@@ -1787,6 +1787,90 @@ static const struct tpacpi_quirk tpacpi_
#undef TPV_Q_X
#undef TPV_Q
+/*
+check tpacpi_check_model()
+
+ * Model Name , Number Model Name
+ * Lenovo LM490s, 814YG01
+
+ "dmesg | grep thinkpad_acpi" shows:
+ thinkpad_acpi: Lenovo Lenovo LM490s, model 814YG01
+
+ How to add new model to blacklist:
+ Add these lines like below into lenovo_blacklist[].
+ {
+ .model_s = "Lenovo K490s",
+ .nummodel_s = "814YJ01",
+ },
+ */
+
+unsigned int no_led = 0 ;
+
+struct blacklist {
+ struct list_head blist; + char *model_s; + char *nummodel_s;
+};
+
+struct blacklist led_blacklist = {
+ .model_s = NULL,
+ .nummodel_s = NULL,
+};
+
+struct blacklist lenovo_blacklist[] = {
+ {
+ .model_s = "Lenovo LM490s",
+ .nummodel_s = "814YG01",
+ },
+ {
+ .model_s = "ThinkPad Edge E430",
+ .nummodel_s = "3254TNU",
+ },
+ {
+ .model_s = "LENOVO",
+ .nummodel_s = "914TK01",
+ },
+ {
+ .model_s = "ThinkPad Twist",
+ .nummodel_s = "334724C",
+ },
+ {
+ .model_s = "Lenovo M490s",
+ .nummodel_s = "914YG01",
+ },
+ {
+ .model_s = "Lenovo K490s",
+ .nummodel_s = "814YJ01",
+ },
+};
+
+static int __init tpacpi_check_model(void)
+{
+ unsigned int i ;
+ struct blacklist *list_p;
+
+ /* If thinkpad_id.nummodel_str is "unkown". */
+ if (!thinkpad_id.nummodel_str) {
+ return 1;
+ }
+
+ INIT_LIST_HEAD(&led_blacklist.blist);
+
+ for(i = 0; i < ARRAY_SIZE(lenovo_blacklist) ; i++) {
+ INIT_LIST_HEAD(&lenovo_blacklist[i].blist);
+ list_add(&lenovo_blacklist[i].blist, &led_blacklist.blist);
+ }
+
+ list_for_each_entry(list_p,&led_blacklist.blist,blist) {
+ if (!strcmp(list_p->model_s,thinkpad_id.model_str)
+ &&
!strcmp(list_p->nummodel_s,thinkpad_id.nummodel_str)) {
+ no_led = 1;
+ pr_info("Disable led support for this model.\n");
+ }
+ }
+ return 0;
+}
+
static void __init tpacpi_check_outdated_fw(void)
{
unsigned long fwvers;@@ -5235,6 +5319,10 @@ static enum led_brightness led_sysfs_get
static void led_exit(void)
{
+ if (no_led == 1 ) {
+ return 0;
+ }
+
unsigned int i;
for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {@@ -5349,6 +5437,10 @@ static enum led_access_mode __init led_i
static int __init led_init(struct ibm_init_struct *iibm) {
+ if (no_led == 1 ) {
+ return 0;
+ }
+
unsigned int i;
int rc;
unsigned long useful_leds;@@ -5397,6 +5489,10 @@ static int __init led_init(struct ibm_in
static int led_read(struct seq_file *m)
{
+ if (no_led == 1 ) {
+ return 0;
+ }
+
if (!led_supported) {
seq_printf(m, "status:\t\tnot supported\n");
return 0;@@ -5423,6 +5519,10 @@ static int led_read(struct seq_file *m)
static int led_write(char *buf)
{
+ if (no_led == 1 ) {
+ return 0;
+ }
+
char *cmd;
int led, rc;
enum led_status_t s;
@@ -9031,6 +9131,9 @@ static int __init thinkpad_acpi_module_i
/* Driver initialization */
thinkpad_acpi_init_banner();
+
+ tpacpi_check_model();
+
tpacpi_check_outdated_fw();
TPACPI_ACPIHANDLE_INIT(ecrd);# End of patch
==============
Bruce Ma
May 28,2013
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/
iQEcBAEBAgAGBQJRpHdvAAoJEFnPatyLvGg17w0H/i2r/ZFbnHD2KRf5tgCWGol+ ihha9IqNXUGMMoltcWh2NrJybKZcc4QspGHAhr3sqX7id825tPYvWEtSPOMXs373 ytHFAVc5SEf40I6Zmwhb6YDgwJsh2SS02wkQeKbfTyi5aj2XSOvK0ap4IDFeFJgd +Ewe7A7ZGwkR5ybBgHSqgw+IUv0H0Gj0PnJooLqLVXbt7gJ9583yP/SLZyADkgJv KCRjbId/I8OI58/Wil8u3rkzTKO1RU0UUItxiJrDuinod4heKnQ0MyPgbDzVlUU1 3KE08jsITFEckI4QDwQpPcHbWLh3+C5hrsCwBhKDZDZEorzAxXxEDo1idz/g3Io= =DuJ/
-----END PGP SIGNATURE-----
Review
Quoted 5 lines · Bruce
(quoted diff) +5
-0+struct blacklist lenovo_blacklist[] = { + { + .model_s = "Lenovo LM490s", + .nummodel_s = "814YG01", + },
The driver already has a list of LED support per model in the
static const struct tpacpi_quirk led_useful_qtable[] __initconst = {}
array. Why do you duplicate this with lots of new model checking code
instead of just using the code that's already there?
Quoted 3 lines
static void
led_exit(void)
{
+ if (no_led== 1 ) {
The driver already has provisions for signalling that LEDs are unsupported through the 'led_supported' variable. Why do you add another variable, and duplicate testing in every access function?
But I don't think this part is needed at all, as long as you set up the proper LED map in led_useful_qtable.
Bjørn
Hi, Bjorn
Thank your advice .
I will modify my code, then try to submit again.
Bruce.Ma
May 29,2013
Quoted 29 lines · Bjørn Mork
Review
Quoted 5 lines · Bruce
(quoted diff) +5
-0+struct blacklist lenovo_blacklist[] = { + { + .model_s = "Lenovo LM490s", + .nummodel_s = "814YG01", + },The driver already has a list of LED support per model in the
static const struct
tpacpi_quirkled_useful_qtable[]__initconst= {}array. Why do you duplicate this with lots of new model checking code
instead of just using the code that's already there?Quoted 3 lines
static void
led_exit(void)
{
+ if (no_led== 1 ) {The driver already has provisions for signalling that LEDs are unsupported through the '
led_supported' variable. Why do you add another variable, and duplicate testing in every access function?But I don't think this part is needed at all, as long as you set up the proper LED map in
led_useful_qtable.Bjørn