Skip to contentSkip to conversation

infiniband_diags/src/saquery.c: Add SMInfoRecord support

PATCH In review Husam Kahalah 2 participants 2 messages May 28, 2013 – Jun 12, 2013 1 message not in the archive InfiniBand

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 infiniband_diags/src/saquery.c: Add SMInfoRecord support

This patch is the combination of 2 patches
infiniband_diags/src/saquery.c: Add SMInfoRecord support infiniband_diags/doc/rst/saquery.8.in.rst: Add support to the manual

---
 doc/rst/saquery.8.in.rst |    1 +
 src/saquery.c            |   45 
+++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 46 insertions(+)
doc/rst/saquery.8.in.rst +1 -0
index 8d87096..0551917 100644
@@ -156,6 +156,7 @@ Supported query names (and aliases):
         MFTRecord (MFTR) [[mlid]/[position]/[block]]
         GUIDInfoRecord (GIR) [[lid]/[block]]
         SwitchInfoRecord (SWIR) [lid]
+        SMInfoRecord (SMIR) [lid]
 
 
 
src/saquery.c +45 -0

63 lines not on this page · raw message

Signature · 8 lines
1.7.9.6



--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): 51A49D2A.1090602-DMD6N21cJuFWk0Htik3J/[email protected]

#2 lore raw

Husam,

Sorry for the delay but I have to report that this patch is somehow corrupted.

I can't even apply the patch by hand after cleaning up the invalid line wrap.

10:46:39 > patch -p 1 < ../incomming/infiniband_diags-src-saquery.c-Add-SMInfoRecord-support.patch patching file doc/rst/saquery.8.in.rst
Hunk #1 FAILED at 156.
1 out of 1 hunk FAILED -- saving rejects to file doc/rst/saquery.8.in.rst.rej patching file src/saquery.c
Hunk #1 FAILED at 487.
Hunk #2 FAILED at 1192.
2 out of 2 hunks FAILED -- saving rejects to file src/saquery.c.rej

Could you rebase and try again?

Ira

Quoted 99 lines

-----Original Message-----
From: Husam Kahalah [mailto:hkahalah-DMD6N21cJuFWk0Htik3J/[email protected]]
Sent: Tuesday, May 28, 2013 5:04 AM
To: Weiny, Ira
Cc: [email protected]; danby-VPRAkNaXOzVWk0Htik3J/[email protected]; danielk-VPRAkNaXOzVWk0Htik3J/[email protected]
Subject: [PATCH] infiniband_diags/src/saquery.c: Add SMInfoRecord support

This patch is the combination of 2 patches
infiniband_diags/src/saquery.c: Add SMInfoRecord support infiniband_diags/doc/rst/saquery.8.in.rst: Add support to the manual

---
  doc/rst/saquery.8.in.rst |    1 +
  src/saquery.c            |   45
+++++++++++++++++++++++++++++++++++++++++++++
  2 files changed, 46 insertions(+)
doc/rst/saquery.8.in.rst index renamed from doc/rst/saquery.8.in.rst +0 -0

8d87096..0551917 100644

doc/rst/saquery.8.in.rst +1 -0
@@ -156,6 +156,7 @@ Supported query names (and aliases):
          MFTRecord (MFTR) [[mlid]/[position]/[block]]
          GUIDInfoRecord (GIR) [[lid]/[block]]
          SwitchInfoRecord (SWIR) [lid]
+        SMInfoRecord (SMIR) [lid]
 
 
 
src/saquery.c +23 -0
@@ -487,6 +487,30 @@ static void dump_service_record(void *data)
             cl_ntoh64(p_sr->service_data64[1]));
  }
 
+static void dump_sm_info_record(void *data) {
+    ib_sminfo_record_t *p_smr = data;
+    const ib_sm_info_t *const p_smi = &p_smr->sm_info;
+    uint8_t priority, state;
+    priority = ib_sminfo_get_priority(p_smi);
+    state = ib_sminfo_get_state(p_smi);
+
+    printf("SMInfoRecord dump:\n"
+           "\t\tRID\n"
+           "\t\tLID...................%u\n"
+           "\t\tSMInfo dump:\n"
+           "\t\tGUID..................0x%016" PRIx64 "\n"
+           "\t\tSM_Key................0x%016" PRIx64 "\n"
+           "\t\tActCount..............0x%X\n"
+           "\t\tPriority..............%u\n"
+           "\t\tSMState...............%u\n",
+           cl_ntoh16(p_smr->lid),
+           cl_ntoh64(p_smr->sm_info.guid),
+           cl_ntoh64(p_smr->sm_info.sm_key),
+           cl_ntoh32(p_smr->sm_info.act_count),
+           priority, state);
+}
+
  static void dump_switch_info_record(void *data)
  {
      ib_switch_info_record_t *p_sir = data; @@ -1192,6 +1216,25 @@ static

int query_service_records(const struct query_cmd *q, struct sa_handle * h

                      dump_service_record);

}

src/saquery.c +17 -0
+static int query_sm_info_records(const struct query_cmd *q,
+                 struct sa_handle * h, struct query_params *p,
+                 int argc, char *argv[]) {
+    ib_sminfo_record_t smir;
+    ib_net64_t comp_mask = 0;
+    int lid = 0;
+
+    if (argc > 0)
+        parse_lid_and_ports(h, argv[0], &lid, NULL, NULL);
+
+    memset(&smir, 0, sizeof(smir));
+    CHECK_AND_SET_VAL(lid, 16, 0, smir.lid, SMIR, LID);
+
+    return get_and_dump_any_records(h, IB_SA_ATTR_SMINFORECORD, 0,
+                    comp_mask, &smir, sizeof(smir),
+                    dump_sm_info_record); }
+
  static int query_switchinfo_records(const struct query_cmd *q,
                  struct sa_handle * h, struct query_params *p,
                  int argc, char *argv[]) @@ -1404,6 +1447,8 @@ static const struct
query_cmd query_cmds[] = {
       "[[lid]/[block]]", query_guidinfo_records},
      {"SwitchInfoRecord", "SWIR", IB_SA_ATTR_SWITCHINFORECORD,
       "[lid]", query_switchinfo_records},
src/saquery.c +2 -1
+    {"SMInfoRecord", "SMIR", IB_SA_ATTR_SMINFORECORD,
+    "[lid]", query_sm_info_records},
      {0}
  };
 
--
Quoted 3 lines

1.7.9.6

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html