cpuidle: improve governor Kconfig options
PATCH 1/1 cpuidle: improve governor Kconfig options
Each governor is suitable for different kernel configurations: the menu governor suits better for a tickless system, while the ladder governor fits better for a periodic timer tick system.
The Kconfig does not allow to [un]select a governor, thus both are compiled in the kernel but the init order makes the menu governor to be the last one to be registered, so becoming the default. The only way to switch back to the ladder governor is to enable the sysfs governor switch in the kernel command line.
Because it seems nobody complained about this, the menu governor is used by default most of the time on the system, having both governors is not really necessary on a tickless system but there isn't a config option to disable one or another governor.
Create a submenu for cpuidle and add a label for each governor, so we can see the option in the menu config and enable/disable it.
The governors will be enabled depending on the CONFIG_NO_HZ option:
- If CONFIG_NO_HZ is set, then the menu governor is selected and the ladder governor is optional, defaulting to 'no'
- If CONFIG_NO_HZ is not set, then the ladder governor is selected and the menu governor is optional, defaulting to 'no'
--- drivers/cpuidle/Kconfig | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-)
drivers/cpuidle/Kconfig +9 -11
@@ -1,7 +1,9 @@ -config CPU_IDLE +menuconfig CPU_IDLE bool "CPU idle PM support" default y if ACPI || PPC_PSERIES + select CPU_IDLE_GOV_LADDER if (!NO_HZ && !NO_HZ_IDLE) + select CPU_IDLE_GOV_MENU if (NO_HZ || NO_HZ_IDLE) help CPU idle is a generic framework for supporting software-controlled idle processor power management. It includes modular cross-platform
@@ -9,9 +11,10 @@ config CPU_IDLE If you're using an ACPI-enabled platform, you should say Y here. +if CPU_IDLE + config CPU_IDLE_MULTIPLE_DRIVERS bool "Support multiple cpuidle drivers" - depends on CPU_IDLE default n help Allows the cpuidle framework to use different drivers for each CPU.
@@ -19,24 +22,19 @@ config CPU_IDLE_MULTIPLE_DRIVERS states. If unsure say N. config CPU_IDLE_GOV_LADDER - bool - depends on CPU_IDLE - default y + bool "Ladder governor (for periodic timer tick)" + default n if (NO_HZ || NO_HZ_IDLE) config CPU_IDLE_GOV_MENU - bool - depends on CPU_IDLE && NO_HZ - default y + bool "Menu governor (for tickless system)" + default n if (!NO_HZ && !NO_HZ_IDLE) config ARCH_NEEDS_CPU_IDLE_COUPLED def_bool n -if CPU_IDLE - config CPU_IDLE_CALXEDA bool "CPU Idle Driver for Calxeda processors" depends on ARCH_HIGHBANK help Select this to enable cpuidle on Calxeda processors. - endif
Signature · 1 line
1.7.9.5
Quoted 14 lines · Daniel Lezcano
Each governor is suitable for different kernel configurations: the menu governor suits better for a tickless system, while the ladder governor fits better for a periodic timer tick system.
The
Kconfigdoes not allow to [un]select a governor, thus both are compiled in the kernel but the init order makes the menu governor to be the last one to be registered, so becoming the default. The only way to switch back to the ladder governor is to enable the sysfs governor switch in the kernel command line.Because it seems nobody complained about this, the menu governor is used by default most of the time on the system, having both governors is not really necessary on a tickless system but there isn't a config option to disable one or another governor.
Quoted 6 lines
Create a submenu for cpuidle and add a label for each governor, so we can see the option in the menu config and enable/disable it.
The governors will be enabled depending on the
CONFIG_NO_HZoption:
- IfCONFIG_NO_HZis set, then the menu governor is selected and the ladder governor is optional, defaulting to 'no'
Why not defaulting to 'yes'? That'd be backwards compatible, wouldn't it?
Quoted 2 lines
- If
CONFIG_NO_HZis not set, then the ladder governor is selected and the menu governor is optional, defaulting to 'no'
Are you sure this is not going to introduce regressions with CONFIG_NO_HZ unset?
Rafael
Quoted 62 lines
Signed-off-by Daniel Lezcano <[email protected]>--- drivers/cpuidle/Kconfig | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-)drivers/cpuidle/Kconfig +9
-11@@ -1,7 +1,9 @@ -config CPU_IDLE +menuconfig CPU_IDLE bool "CPU idle PM support" default y if ACPI || PPC_PSERIES + select CPU_IDLE_GOV_LADDER if (!NO_HZ && !NO_HZ_IDLE) + select CPU_IDLE_GOV_MENU if (NO_HZ || NO_HZ_IDLE) help CPU idle is a generic framework for supporting software-controlled idle processor power management. It includes modular cross-platform@@ -9,9 +11,10 @@ config CPU_IDLE If you're using an ACPI-enabled platform, you should say Y here. +if CPU_IDLE + config CPU_IDLE_MULTIPLE_DRIVERS bool "Support multiple cpuidle drivers" - depends on CPU_IDLE default n help Allows the cpuidle framework to use different drivers for each CPU.@@ -19,24 +22,19 @@ config CPU_IDLE_MULTIPLE_DRIVERS states. If unsure say N. config CPU_IDLE_GOV_LADDER - bool - depends on CPU_IDLE - default y + bool "Ladder governor (for periodic timer tick)" + default n if (NO_HZ || NO_HZ_IDLE) config CPU_IDLE_GOV_MENU - bool - depends on CPU_IDLE && NO_HZ - default y + bool "Menu governor (for tickless system)" + default n if (!NO_HZ && !NO_HZ_IDLE) config ARCH_NEEDS_CPU_IDLE_COUPLED def_bool n -if CPU_IDLE - config CPU_IDLE_CALXEDA bool "CPU Idle Driver for Calxeda processors" depends on ARCH_HIGHBANK help Select this to enable cpuidle on Calxeda processors. - endif
Signature · 2 lines
I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center.
PATCH 1/1 cpuidle: improve governor Kconfig options
Quoted 15 lines · Rafael J. Wysocki
Quoted 14 lines · Daniel Lezcano
Each governor is suitable for different kernel configurations: the menu governor suits better for a tickless system, while the ladder governor fits better for a periodic timer tick system.
The
Kconfigdoes not allow to [un]select a governor, thus both are compiled in the kernel but the init order makes the menu governor to be the last one to be registered, so becoming the default. The only way to switch back to the ladder governor is to enable the sysfs governor switch in the kernel command line.Because it seems nobody complained about this, the menu governor is used by default most of the time on the system, having both governors is not really necessary on a tickless system but there isn't a config option to disable one or another governor.
Quoted 8 lines
Quoted 6 lines
Create a submenu for cpuidle and add a label for each governor, so we can see the option in the menu config and enable/disable it.
The governors will be enabled depending on the
CONFIG_NO_HZoption:
- IfCONFIG_NO_HZis set, then the menu governor is selected and the ladder governor is optional, defaulting to 'no'Why not defaulting to 'yes'? That'd be backwards compatible, wouldn't it?
Yes, that wouldn't be backward compatible but who wants the ladder governor which is less efficient with a tickless system ?
Quoted 5 lines
Quoted 2 lines
- If
CONFIG_NO_HZis not set, then the ladder governor is selected and the menu governor is optional, defaulting to 'no'Are you sure this is not going to introduce regressions with
CONFIG_NO_HZunset?
Yes, a system configured with a periodic tick will use the ladder instead of the menu governor (which is less efficient on this configuration).
Currently the default is the menu governor with a periodic tick system because both governors are compiled in and the init order makes the menu governor to be enabled instead of the 'ladder'.
We can set both to 'yes' by default but in this case, I suggest to add in the code a 'preferred' governor depending on tickless or not, so the right governor is chosen at boot time depending on CONFIG_NO_HZ.
Otherwise, I am not sure people running servers (with a periodic tick) will change their kernel command line option to enable the sysfs governor switch to change the governor to ladder, neither they are aware ladder is better for their system.
I am open to any suggestion.
Thanks
-- Daniel
Signature · 5 lines
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH 1/1 cpuidle: improve governor Kconfig options
Quoted 19 lines · Daniel Lezcano
Quoted 18 lines · Rafael J. Wysocki
Quoted 17 lines · Daniel Lezcano
Each governor is suitable for different kernel configurations: the menu governor suits better for a tickless system, while the ladder governor fits better for a periodic timer tick system.
The
Kconfigdoes not allow to [un]select a governor, thus both are compiled in the kernel but the init order makes the menu governor to be the last one to be registered, so becoming the default. The only way to switch back to the ladder governor is to enable the sysfs governor switch in the kernel command line.Because it seems nobody complained about this, the menu governor is used by default most of the time on the system, having both governors is not really necessary on a tickless system but there isn't a config option to disable one or another governor.
Create a submenu for cpuidle and add a label for each governor, so we can see the option in the menu config and enable/disable it.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
The governors will be enabled depending on the
CONFIG_NO_HZoption:
- IfCONFIG_NO_HZis set, then the menu governor is selected and the ladder governor is optional, defaulting to 'no'Why not defaulting to 'yes'? That'd be backwards compatible, wouldn't it?
Yes, that wouldn't be backward compatible but who wants the ladder governor which is less efficient with a tickless system ?
I don't know and this isn't the right question to ask I think.
You need to ask who uses the ladder governor with CONFIG_NO_HZ and you need to avoid making changes that aren't backwards compatible if you don't know the answer (which I'm pretty sure is the case).
I'd prefer to default to 'yes' to start with and then to change the default to 'no' after a couple of cycles, possibly.
Quoted 9 lines
Quoted 5 lines
Quoted 2 lines
- If
CONFIG_NO_HZis not set, then the ladder governor is selected and the menu governor is optional, defaulting to 'no'Are you sure this is not going to introduce regressions with
CONFIG_NO_HZunset?Yes, a system configured with a periodic tick will use the ladder instead of the menu governor (which is less efficient on this configuration).
Well, "less efficient" meaning what exactly? Less power-efficient or less efficient performance-wise?
Quoted 3 lines
Currently the default is the menu governor with a periodic tick system because both governors are compiled in and the init order makes the menu governor to be enabled instead of the 'ladder'.
I understand that.
Quoted 10 lines
We can set both to 'yes' by default but in this case, I suggest to add in the code a 'preferred' governor depending on tickless or not, so the right governor is chosen at boot time depending on
CONFIG_NO_HZ.Otherwise, I am not sure people running servers (with a periodic tick) will change their kernel command line option to enable the sysfs governor switch to change the governor to ladder, neither they are aware ladder is better for their system.
I am open to any suggestion.
I think the change to make the governor preference depend on CONFIG_NO_HZ kind of makes sense. However, I'd default to 'yes' for both governors in both configurations to start with (which basically means that the ordering will now depend on CONFIG_NO_HZ).
Thanks,
Rafael
Signature · 2 lines
I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center.
PATCH 1/1 cpuidle: improve governor Kconfig options
Quoted 44 lines · Rafael J. Wysocki
Quoted 19 lines · Daniel Lezcano
Quoted 18 lines · Rafael J. Wysocki
Quoted 17 lines · Daniel Lezcano
Each governor is suitable for different kernel configurations: the menu governor suits better for a tickless system, while the ladder governor fits better for a periodic timer tick system.
The
Kconfigdoes not allow to [un]select a governor, thus both are compiled in the kernel but the init order makes the menu governor to be the last one to be registered, so becoming the default. The only way to switch back to the ladder governor is to enable the sysfs governor switch in the kernel command line.Because it seems nobody complained about this, the menu governor is used by default most of the time on the system, having both governors is not really necessary on a tickless system but there isn't a config option to disable one or another governor.
Create a submenu for cpuidle and add a label for each governor, so we can see the option in the menu config and enable/disable it.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
The governors will be enabled depending on the
CONFIG_NO_HZoption:
- IfCONFIG_NO_HZis set, then the menu governor is selected and the ladder governor is optional, defaulting to 'no'Why not defaulting to 'yes'? That'd be backwards compatible, wouldn't it?
Yes, that wouldn't be backward compatible but who wants the ladder governor which is less efficient with a tickless system ?
I don't know and this isn't the right question to ask I think.
You need to ask who uses the ladder governor with
CONFIG_NO_HZand you need to avoid making changes that aren't backwards compatible if you don't know the answer (which I'm pretty sure is the case).I'd prefer to default to 'yes' to start with and then to change the default to 'no' after a couple of cycles, possibly.
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
- If
CONFIG_NO_HZis not set, then the ladder governor is selected and the menu governor is optional, defaulting to 'no'Are you sure this is not going to introduce regressions with
CONFIG_NO_HZunset?
Quoted 6 lines
Quoted 3 lines
Yes, a system configured with a periodic tick will use the ladder instead of the menu governor (which is less efficient on this configuration).
Well, "less efficient" meaning what exactly? Less power-efficient or less efficient performance-wise?
less power efficient.
Quoted 15 lines
Quoted 3 lines
Currently the default is the menu governor with a periodic tick system because both governors are compiled in and the init order makes the menu governor to be enabled instead of the 'ladder'.
I understand that.
Quoted 9 lines
We can set both to 'yes' by default but in this case, I suggest to add in the code a 'preferred' governor depending on tickless or not, so the right governor is chosen at boot time depending on
CONFIG_NO_HZ.Otherwise, I am not sure people running servers (with a periodic tick) will change their kernel command line option to enable the sysfs governor switch to change the governor to ladder, neither they are aware ladder is better for their system.
Quoted 6 lines
Quoted 1 line
I am open to any suggestion.
I think the change to make the governor preference depend on
CONFIG_NO_HZkind of makes sense. However, I'd default to 'yes' for both governors in both configurations to start with (which basically means that the ordering will now depend onCONFIG_NO_HZ).
Ok, no problem. I will respin the patch.
Thanks for the review
-- Daniel
Signature · 5 lines
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog
PATCH 1/1 cpuidle: improve governor Kconfig options
Quoted 45 lines · Daniel Lezcano
Quoted 44 lines · Rafael J. Wysocki
Quoted 19 lines · Daniel Lezcano
Quoted 18 lines · Rafael J. Wysocki
Quoted 17 lines · Daniel Lezcano
Each governor is suitable for different kernel configurations: the menu governor suits better for a tickless system, while the ladder governor fits better for a periodic timer tick system.
The
Kconfigdoes not allow to [un]select a governor, thus both are compiled in the kernel but the init order makes the menu governor to be the last one to be registered, so becoming the default. The only way to switch back to the ladder governor is to enable the sysfs governor switch in the kernel command line.Because it seems nobody complained about this, the menu governor is used by default most of the time on the system, having both governors is not really necessary on a tickless system but there isn't a config option to disable one or another governor.
Create a submenu for cpuidle and add a label for each governor, so we can see the option in the menu config and enable/disable it.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
The governors will be enabled depending on the
CONFIG_NO_HZoption:
- IfCONFIG_NO_HZis set, then the menu governor is selected and the ladder governor is optional, defaulting to 'no'Why not defaulting to 'yes'? That'd be backwards compatible, wouldn't it?
Yes, that wouldn't be backward compatible but who wants the ladder governor which is less efficient with a tickless system ?
I don't know and this isn't the right question to ask I think.
You need to ask who uses the ladder governor with
CONFIG_NO_HZand you need to avoid making changes that aren't backwards compatible if you don't know the answer (which I'm pretty sure is the case).I'd prefer to default to 'yes' to start with and then to change the default to 'no' after a couple of cycles, possibly.
Quoted 6 lines
Quoted 5 lines
Quoted 2 lines
- If
CONFIG_NO_HZis not set, then the ladder governor is selected and the menu governor is optional, defaulting to 'no'Are you sure this is not going to introduce regressions with
CONFIG_NO_HZunset?
Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
Yes, a system configured with a periodic tick will use the ladder instead of the menu governor (which is less efficient on this configuration).
Well, "less efficient" meaning what exactly? Less power-efficient or less efficient performance-wise?
less power efficient.
I thought so, but that's really important, because some people *do* care about performance. In the context of changes like this one we always need to talk about both power and performance. For example, when you're saying that changing something may lead to better energy saving behavior, you should also say what the impact of that change on performance is going to be.
Thanks,
Rafael
Signature · 2 lines
I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center.
PATCH 1/1 cpuidle: improve governor Kconfig options
Quoted 53 lines · Rafael J. Wysocki
Quoted 52 lines · Daniel Lezcano
Quoted 50 lines · Rafael J. Wysocki
Quoted 19 lines · Daniel Lezcano
Quoted 18 lines · Rafael J. Wysocki
Quoted 17 lines · Daniel Lezcano
Each governor is suitable for different kernel configurations: the menu governor suits better for a tickless system, while the ladder governor fits better for a periodic timer tick system.
The
Kconfigdoes not allow to [un]select a governor, thus both are compiled in the kernel but the init order makes the menu governor to be the last one to be registered, so becoming the default. The only way to switch back to the ladder governor is to enable the sysfs governor switch in the kernel command line.Because it seems nobody complained about this, the menu governor is used by default most of the time on the system, having both governors is not really necessary on a tickless system but there isn't a config option to disable one or another governor.
Create a submenu for cpuidle and add a label for each governor, so we can see the option in the menu config and enable/disable it.
Quoted 8 lines
Quoted 5 lines
Quoted 3 lines
The governors will be enabled depending on the
CONFIG_NO_HZoption:
- IfCONFIG_NO_HZis set, then the menu governor is selected and the ladder governor is optional, defaulting to 'no'Why not defaulting to 'yes'? That'd be backwards compatible, wouldn't it?
Yes, that wouldn't be backward compatible but who wants the ladder governor which is less efficient with a tickless system ?
I don't know and this isn't the right question to ask I think.
You need to ask who uses the ladder governor with
CONFIG_NO_HZand you need to avoid making changes that aren't backwards compatible if you don't know the answer (which I'm pretty sure is the case).I'd prefer to default to 'yes' to start with and then to change the default to 'no' after a couple of cycles, possibly.
Quoted 9 lines
Quoted 5 lines
Quoted 2 lines
- If
CONFIG_NO_HZis not set, then the ladder governor is selected and the menu governor is optional, defaulting to 'no'Are you sure this is not going to introduce regressions with
CONFIG_NO_HZunset?Yes, a system configured with a periodic tick will use the ladder instead of the menu governor (which is less efficient on this configuration).
Well, "less efficient" meaning what exactly? Less power-efficient or less efficient performance-wise?
Quoted 7 lines
Quoted 1 line
less power efficient.
I thought so, but that's really important, because some people *do* care about performance. In the context of changes like this one we always need to talk about both power and performance. For example, when you're saying that changing something may lead to better energy saving behavior, you should also say what the impact of that change on performance is going to be
I fully agree with you but with this very specific case, when the cpuidle is enabled in the system, it is to have the best trade-off between performance and power saving. Using the ladder governor on a tickless system is not power efficient and the performance is not significantly improved. If the governor is too agressive in power saving and impacts the performance the pm_qos will guarantee the needed performance.
Desktop will use tickless system because they want power saving, thus cpuidle and the menu governor is the best trade-off.
Server will want more responsiveness and will use a periodic timer tick system, the cpuidle and the ladder suits better.
The pm_qos will ensure a latency for both governors.
But again I agree 100% with you and keeping the old behavior makes sense until we sort this out clearly in the next cycles.
Thanks
-- Daniel
Signature · 5 lines
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog