Skip to contentSkip to conversation

Control framework conversions

PATCH In review Hans Verkuil 3 participants 25 messages May 31, 2013 – Nov 4, 2013

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover Control framework conversions

This continues my ongoing work to convert drivers to the control framework.

These conversions touch upon rarely used drivers. The only one I could actually test was the saa6752hs conversion. All others are untested because I do not have the hardware.

Ondrej, I know you have a radio-sf16fmi board. I'd appreciate it if you could test these patches for me. If you could run v4l2-compliance, then that would be great.

I don't believe anyone has a working timberdale environment or a tea5764 setup. If you do, and you are willing to test, then let me know. Otherwise those changes will go in untested.

Regards,

Hans

#1 lore raw

PATCH 1/21 saa7706h: convert to the control framework.

From: Hans Verkuil <[email protected]>

Cc Richard Röjfors <[email protected]>
---
 drivers/media/radio/saa7706h.c |   58 +++++++++++++++++++++-------------------
 1 file changed, 30 insertions(+), 28 deletions(-)
drivers/media/radio/saa7706h.c +30 -28
index 06c06cc..1f09844 100644
@@ -26,6 +26,7 @@
 #include <linux/slab.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-chip-ident.h>
+#include <media/v4l2-ctrls.h>
 
 #define DRIVER_NAME "saa7706h"
 
@@ -127,6 +128,7 @@
 
 struct saa7706h_state {
 	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
 	unsigned muted;
 };
 
@@ -317,34 +319,16 @@ static int saa7706h_mute(struct v4l2_subdev *sd)
 	return err;
 }
 
-static int saa7706h_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+static int saa7706h_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	switch (qc->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
-	}
-	return -EINVAL;
-}
-
-static int saa7706h_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
-	struct saa7706h_state *state = to_state(sd);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		ctrl->value = state->muted;
-		return 0;
-	}
-	return -EINVAL;
-}
+	struct saa7706h_state *state =
+		container_of(ctrl->handler, struct saa7706h_state, hdl);
 
-static int saa7706h_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
 	switch (ctrl->id) {
 	case V4L2_CID_AUDIO_MUTE:
-		if (ctrl->value)
-			return saa7706h_mute(sd);
-		return saa7706h_unmute(sd);
+		if (ctrl->val)
+			return saa7706h_mute(&state->sd);
+		return saa7706h_unmute(&state->sd);
 	}
 	return -EINVAL;
 }
@@ -357,11 +341,19 @@ static int saa7706h_g_chip_ident(struct v4l2_subdev *sd,
 	return v4l2_chip_ident_i2c_client(client, chip, V4L2_IDENT_SAA7706H, 0);
 }
 
+static const struct v4l2_ctrl_ops saa7706h_ctrl_ops = {
+	.s_ctrl = saa7706h_s_ctrl,
+};
+
 static const struct v4l2_subdev_core_ops saa7706h_core_ops = {
 	.g_chip_ident = saa7706h_g_chip_ident,
-	.queryctrl = saa7706h_queryctrl,
-	.g_ctrl = saa7706h_g_ctrl,
-	.s_ctrl = saa7706h_s_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
 };
 
 static const struct v4l2_subdev_ops saa7706h_ops = {
@@ -393,13 +385,20 @@ static int saa7706h_probe(struct i2c_client *client,
 	sd = &state->sd;
 	v4l2_i2c_subdev_init(sd, client, &saa7706h_ops);
 
+	v4l2_ctrl_handler_init(&state->hdl, 4);
+	v4l2_ctrl_new_std(&state->hdl, &saa7706h_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	sd->ctrl_handler = &state->hdl;
+	err = state->hdl.error;
+	if (err)
+		goto err;
+
 	/* check the rom versions */
 	err = saa7706h_get_reg16(sd, SAA7706H_DSP1_ROM_VER);
 	if (err < 0)
 		goto err;
 	if (err != SUPPORTED_DSP1_ROM_VER)
 		v4l2_warn(sd, "Unknown DSP1 ROM code version: 0x%x\n", err);
-
 	state->muted = 1;
 
 	/* startup in a muted state */
@@ -411,6 +410,7 @@ static int saa7706h_probe(struct i2c_client *client,
 
 err:
 	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(&state->hdl);
 	kfree(to_state(sd));
 
 	printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", err);
@@ -421,9 +421,11 @@ err:
 static int saa7706h_remove(struct i2c_client *client)
 {
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct saa7706h_state *state = to_state(sd);
 
 	saa7706h_mute(sd);
 	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(&state->hdl);
 	kfree(to_state(sd));
 	return 0;
 }
Signature · 1 line
1.7.10.4
#2 lore raw

PATCH 2/21 sr030pc30: convert to the control framework.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

Cc Sylwester Nawrocki <[email protected]>
---
 drivers/media/i2c/sr030pc30.c |  276 +++++++++++++----------------------------
 1 file changed, 88 insertions(+), 188 deletions(-)
drivers/media/i2c/sr030pc30.c +88 -188
index 4c5a9ee..ae94326 100644
@@ -23,6 +23,7 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-subdev.h>
 #include <media/v4l2-mediabus.h>
+#include <media/v4l2-ctrls.h>
 #include <media/sr030pc30.h>
 
 static int debug;
@@ -142,17 +143,24 @@ module_param(debug, int, 0644);
 
 struct sr030pc30_info {
 	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
 	const struct sr030pc30_platform_data *pdata;
 	const struct sr030pc30_format *curr_fmt;
 	const struct sr030pc30_frmsize *curr_win;
-	unsigned int auto_wb:1;
-	unsigned int auto_exp:1;
 	unsigned int hflip:1;
 	unsigned int vflip:1;
 	unsigned int sleep:1;
-	unsigned int exposure;
-	u8 blue_balance;
-	u8 red_balance;
+	struct {
+		/* auto whitebalance control cluster */
+		struct v4l2_ctrl *awb;
+		struct v4l2_ctrl *red;
+		struct v4l2_ctrl *blue;
+	};
+	struct {
+		/* auto exposure control cluster */
+		struct v4l2_ctrl *autoexp;
+		struct v4l2_ctrl *exp;
+	};
 	u8 i2c_reg_page;
 };
 
@@ -173,52 +181,6 @@ struct i2c_regval {
 	u16 val;
 };
 
-static const struct v4l2_queryctrl sr030pc30_ctrl[] = {
-	{
-		.id		= V4L2_CID_AUTO_WHITE_BALANCE,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Auto White Balance",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}, {
-		.id		= V4L2_CID_RED_BALANCE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Red Balance",
-		.minimum	= 0,
-		.maximum	= 127,
-		.step		= 1,
-		.default_value	= 64,
-		.flags		= 0,
-	}, {
-		.id		= V4L2_CID_BLUE_BALANCE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Blue Balance",
-		.minimum	= 0,
-		.maximum	= 127,
-		.step		= 1,
-		.default_value	= 64,
-	}, {
-		.id		= V4L2_CID_EXPOSURE_AUTO,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Auto Exposure",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}, {
-		.id		= V4L2_CID_EXPOSURE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Exposure",
-		.minimum	= EXPOS_MIN_MS,
-		.maximum	= EXPOS_MAX_MS,
-		.step		= 1,
-		.default_value	= 1,
-	}, {
-	}
-};
-
 /* supported resolutions */
 static const struct sr030pc30_frmsize sr030pc30_sizes[] = {
 	{
@@ -394,48 +356,6 @@ static int sr030pc30_pwr_ctrl(struct v4l2_subdev *sd,
 	return ret;
 }
 
-static inline int sr030pc30_enable_autoexposure(struct v4l2_subdev *sd, int on)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-	/* auto anti-flicker is also enabled here */
-	int ret = cam_i2c_write(sd, AE_CTL1_REG, on ? 0xDC : 0x0C);
-	if (!ret)
-		info->auto_exp = on;
-	return ret;
-}
-
-static int sr030pc30_set_exposure(struct v4l2_subdev *sd, int value)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	unsigned long expos = value * info->pdata->clk_rate / (8 * 1000);
-
-	int ret = cam_i2c_write(sd, EXP_TIMEH_REG, expos >> 16 & 0xFF);
-	if (!ret)
-		ret = cam_i2c_write(sd, EXP_TIMEM_REG, expos >> 8 & 0xFF);
-	if (!ret)
-		ret = cam_i2c_write(sd, EXP_TIMEL_REG, expos & 0xFF);
-	if (!ret) { /* Turn off AE */
-		info->exposure = value;
-		ret = sr030pc30_enable_autoexposure(sd, 0);
-	}
-	return ret;
-}
-
-/* Automatic white balance control */
-static int sr030pc30_enable_autowhitebalance(struct v4l2_subdev *sd, int on)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	int ret = cam_i2c_write(sd, AWB_CTL2_REG, on ? 0x2E : 0x2F);
-	if (!ret)
-		ret = cam_i2c_write(sd, AWB_CTL1_REG, on ? 0xFB : 0x7B);
-	if (!ret)
-		info->auto_wb = on;
-
-	return ret;
-}
-
 static int sr030pc30_set_flip(struct v4l2_subdev *sd)
 {
 	struct sr030pc30_info *info = to_sr030pc30(sd);
@@ -498,107 +418,56 @@ static int sr030pc30_try_frame_size(struct v4l2_mbus_framefmt *mf)
 	return -EINVAL;
 }
 
-static int sr030pc30_queryctrl(struct v4l2_subdev *sd,
-			       struct v4l2_queryctrl *qc)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++)
-		if (qc->id == sr030pc30_ctrl[i].id) {
-			*qc = sr030pc30_ctrl[i];
-			v4l2_dbg(1, debug, sd, "%s id: %d\n",
-				 __func__, qc->id);
-			return 0;
-		}
-
-	return -EINVAL;
-}
-
-static inline int sr030pc30_set_bluebalance(struct v4l2_subdev *sd, int value)
-{
-	int ret = cam_i2c_write(sd, MWB_BGAIN_REG, value);
-	if (!ret)
-		to_sr030pc30(sd)->blue_balance = value;
-	return ret;
-}
-
-static inline int sr030pc30_set_redbalance(struct v4l2_subdev *sd, int value)
-{
-	int ret = cam_i2c_write(sd, MWB_RGAIN_REG, value);
-	if (!ret)
-		to_sr030pc30(sd)->red_balance = value;
-	return ret;
-}
-
-static int sr030pc30_s_ctrl(struct v4l2_subdev *sd,
-			    struct v4l2_control *ctrl)
+static int sr030pc30_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	int i, ret = 0;
-
-	for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++)
-		if (ctrl->id == sr030pc30_ctrl[i].id)
-			break;
-
-	if (i == ARRAY_SIZE(sr030pc30_ctrl))
-		return -EINVAL;
-
-	if (ctrl->value < sr030pc30_ctrl[i].minimum ||
-		ctrl->value > sr030pc30_ctrl[i].maximum)
-			return -ERANGE;
+	struct sr030pc30_info *info =
+		container_of(ctrl->handler, struct sr030pc30_info, hdl);
+	struct v4l2_subdev *sd = &info->sd;
+	int ret = 0;
 
 	v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n",
-			 __func__, ctrl->id, ctrl->value);
+			 __func__, ctrl->id, ctrl->val);
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUTO_WHITE_BALANCE:
-		sr030pc30_enable_autowhitebalance(sd, ctrl->value);
-		break;
-	case V4L2_CID_BLUE_BALANCE:
-		ret = sr030pc30_set_bluebalance(sd, ctrl->value);
-		break;
-	case V4L2_CID_RED_BALANCE:
-		ret = sr030pc30_set_redbalance(sd, ctrl->value);
-		break;
-	case V4L2_CID_EXPOSURE_AUTO:
-		sr030pc30_enable_autoexposure(sd,
-			ctrl->value == V4L2_EXPOSURE_AUTO);
-		break;
-	case V4L2_CID_EXPOSURE:
-		ret = sr030pc30_set_exposure(sd, ctrl->value);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-static int sr030pc30_g_ctrl(struct v4l2_subdev *sd,
-			    struct v4l2_control *ctrl)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	v4l2_dbg(1, debug, sd, "%s: id: %d\n", __func__, ctrl->id);
+		if (ctrl->is_new) {
+			ret = cam_i2c_write(sd, AWB_CTL2_REG,
+					ctrl->val ? 0x2E : 0x2F);
+			if (!ret)
+				ret = cam_i2c_write(sd, AWB_CTL1_REG,
+						ctrl->val ? 0xFB : 0x7B);
+		}
+		if (!ret && info->blue->is_new)
+			ret = cam_i2c_write(sd, MWB_BGAIN_REG, info->blue->val);
+		if (!ret && info->red->is_new)
+			ret = cam_i2c_write(sd, MWB_RGAIN_REG, info->red->val);
+		return ret;
 
-	switch (ctrl->id) {
-	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ctrl->value = info->auto_wb;
-		break;
-	case V4L2_CID_BLUE_BALANCE:
-		ctrl->value = info->blue_balance;
-		break;
-	case V4L2_CID_RED_BALANCE:
-		ctrl->value = info->red_balance;
-		break;
 	case V4L2_CID_EXPOSURE_AUTO:
-		ctrl->value = info->auto_exp;
-		break;
-	case V4L2_CID_EXPOSURE:
-		ctrl->value = info->exposure;
-		break;
+		/* auto anti-flicker is also enabled here */
+		if (ctrl->is_new)
+			ret = cam_i2c_write(sd, AE_CTL1_REG,
+				ctrl->val == V4L2_EXPOSURE_AUTO ? 0xDC : 0x0C);
+		if (info->exp->is_new) {
+			unsigned long expos = info->exp->val;
+
+			expos = expos * info->pdata->clk_rate / (8 * 1000);
+
+			if (!ret)
+				ret = cam_i2c_write(sd, EXP_TIMEH_REG,
+						expos >> 16 & 0xFF);
+			if (!ret)
+				ret = cam_i2c_write(sd, EXP_TIMEM_REG,
+						expos >> 8 & 0xFF);
+			if (!ret)
+				ret = cam_i2c_write(sd, EXP_TIMEL_REG,
+						expos & 0xFF);
+		}
+		return ret;
 	default:
 		return -EINVAL;
 	}
+
 	return 0;
 }
 
@@ -752,11 +621,19 @@ static int sr030pc30_s_power(struct v4l2_subdev *sd, int on)
 	return ret;
 }
 
+static const struct v4l2_ctrl_ops sr030pc30_ctrl_ops = {
+	.s_ctrl = sr030pc30_s_ctrl,
+};
+
 static const struct v4l2_subdev_core_ops sr030pc30_core_ops = {
 	.s_power	= sr030pc30_s_power,
-	.queryctrl	= sr030pc30_queryctrl,
-	.s_ctrl		= sr030pc30_s_ctrl,
-	.g_ctrl		= sr030pc30_g_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
 };
 
 static const struct v4l2_subdev_video_ops sr030pc30_video_ops = {
@@ -807,6 +684,7 @@ static int sr030pc30_probe(struct i2c_client *client,
 {
 	struct sr030pc30_info *info;
 	struct v4l2_subdev *sd;
+	struct v4l2_ctrl_handler *hdl;
 	const struct sr030pc30_platform_data *pdata
 		= client->dev.platform_data;
 	int ret;
@@ -830,10 +708,31 @@ static int sr030pc30_probe(struct i2c_client *client,
 
 	v4l2_i2c_subdev_init(sd, client, &sr030pc30_ops);
 
+	hdl = &info->hdl;
+	v4l2_ctrl_handler_init(hdl, 6);
+	info->awb = v4l2_ctrl_new_std(hdl, &sr030pc30_ctrl_ops,
+			V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
+	info->red = v4l2_ctrl_new_std(hdl, &sr030pc30_ctrl_ops,
+			V4L2_CID_RED_BALANCE, 0, 127, 1, 64);
+	info->blue = v4l2_ctrl_new_std(hdl, &sr030pc30_ctrl_ops,
+			V4L2_CID_BLUE_BALANCE, 0, 127, 1, 64);
+	info->autoexp = v4l2_ctrl_new_std(hdl, &sr030pc30_ctrl_ops,
+			V4L2_CID_EXPOSURE_AUTO, 0, 1, 1, 1);
+	info->exp = v4l2_ctrl_new_std(hdl, &sr030pc30_ctrl_ops,
+			V4L2_CID_EXPOSURE, EXPOS_MIN_MS, EXPOS_MAX_MS, 1, 30);
+	sd->ctrl_handler = hdl;
+	if (hdl->error) {
+		int err = hdl->error;
+
+		v4l2_ctrl_handler_free(hdl);
+		return err;
+	}
+	v4l2_ctrl_auto_cluster(3, &info->awb, 0, false);
+	v4l2_ctrl_auto_cluster(2, &info->autoexp, V4L2_EXPOSURE_MANUAL, false);
+	v4l2_ctrl_handler_setup(hdl);
+
 	info->i2c_reg_page	= -1;
 	info->hflip		= 1;
-	info->auto_exp		= 1;
-	info->exposure		= 30;
 
 	return 0;
 }
@@ -843,6 +742,7 @@ static int sr030pc30_remove(struct i2c_client *client)
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 
 	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
 	return 0;
 }
 
Signature · 1 line
1.7.10.4
Acked-by on v1 2/21
#3 lore raw

Re: [PATCH 02/21] sr030pc30: convert to the control framework.

Quoted 4 lines · Hans Verkuil

From: Hans Verkuil <[email protected]>

Cc Sylwester Nawrocki <[email protected]>
Quoted 361 lines
---
 drivers/media/i2c/sr030pc30.c |  276 +++++++++++++----------------------------
 1 file changed, 88 insertions(+), 188 deletions(-)
drivers/media/i2c/sr030pc30.c +87 -188
index 4c5a9ee..ae94326 100644
@@ -23,6 +23,7 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-subdev.h>
 #include <media/v4l2-mediabus.h>
+#include <media/v4l2-ctrls.h>
 #include <media/sr030pc30.h>
 
 static int debug;
@@ -142,17 +143,24 @@ module_param(debug, int, 0644);
 
 struct sr030pc30_info {
 	struct v4l2_subdev sd;
+	struct v4l2_ctrl_handler hdl;
 	const struct sr030pc30_platform_data *pdata;
 	const struct sr030pc30_format *curr_fmt;
 	const struct sr030pc30_frmsize *curr_win;
-	unsigned int auto_wb:1;
-	unsigned int auto_exp:1;
 	unsigned int hflip:1;
 	unsigned int vflip:1;
 	unsigned int sleep:1;
-	unsigned int exposure;
-	u8 blue_balance;
-	u8 red_balance;
+	struct {
+		/* auto whitebalance control cluster */
+		struct v4l2_ctrl *awb;
+		struct v4l2_ctrl *red;
+		struct v4l2_ctrl *blue;
+	};
+	struct {
+		/* auto exposure control cluster */
+		struct v4l2_ctrl *autoexp;
+		struct v4l2_ctrl *exp;
+	};
 	u8 i2c_reg_page;
 };
 
@@ -173,52 +181,6 @@ struct i2c_regval {
 	u16 val;
 };
 
-static const struct v4l2_queryctrl sr030pc30_ctrl[] = {
-	{
-		.id		= V4L2_CID_AUTO_WHITE_BALANCE,
-		.type		= V4L2_CTRL_TYPE_BOOLEAN,
-		.name		= "Auto White Balance",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}, {
-		.id		= V4L2_CID_RED_BALANCE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Red Balance",
-		.minimum	= 0,
-		.maximum	= 127,
-		.step		= 1,
-		.default_value	= 64,
-		.flags		= 0,
-	}, {
-		.id		= V4L2_CID_BLUE_BALANCE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Blue Balance",
-		.minimum	= 0,
-		.maximum	= 127,
-		.step		= 1,
-		.default_value	= 64,
-	}, {
-		.id		= V4L2_CID_EXPOSURE_AUTO,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Auto Exposure",
-		.minimum	= 0,
-		.maximum	= 1,
-		.step		= 1,
-		.default_value	= 1,
-	}, {
-		.id		= V4L2_CID_EXPOSURE,
-		.type		= V4L2_CTRL_TYPE_INTEGER,
-		.name		= "Exposure",
-		.minimum	= EXPOS_MIN_MS,
-		.maximum	= EXPOS_MAX_MS,
-		.step		= 1,
-		.default_value	= 1,
-	}, {
-	}
-};
-
 /* supported resolutions */
 static const struct sr030pc30_frmsize sr030pc30_sizes[] = {
 	{
@@ -394,48 +356,6 @@ static int sr030pc30_pwr_ctrl(struct v4l2_subdev *sd,
 	return ret;
 }
 
-static inline int sr030pc30_enable_autoexposure(struct v4l2_subdev *sd, int on)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-	/* auto anti-flicker is also enabled here */
-	int ret = cam_i2c_write(sd, AE_CTL1_REG, on ? 0xDC : 0x0C);
-	if (!ret)
-		info->auto_exp = on;
-	return ret;
-}
-
-static int sr030pc30_set_exposure(struct v4l2_subdev *sd, int value)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	unsigned long expos = value * info->pdata->clk_rate / (8 * 1000);
-
-	int ret = cam_i2c_write(sd, EXP_TIMEH_REG, expos >> 16 & 0xFF);
-	if (!ret)
-		ret = cam_i2c_write(sd, EXP_TIMEM_REG, expos >> 8 & 0xFF);
-	if (!ret)
-		ret = cam_i2c_write(sd, EXP_TIMEL_REG, expos & 0xFF);
-	if (!ret) { /* Turn off AE */
-		info->exposure = value;
-		ret = sr030pc30_enable_autoexposure(sd, 0);
-	}
-	return ret;
-}
-
-/* Automatic white balance control */
-static int sr030pc30_enable_autowhitebalance(struct v4l2_subdev *sd, int on)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	int ret = cam_i2c_write(sd, AWB_CTL2_REG, on ? 0x2E : 0x2F);
-	if (!ret)
-		ret = cam_i2c_write(sd, AWB_CTL1_REG, on ? 0xFB : 0x7B);
-	if (!ret)
-		info->auto_wb = on;
-
-	return ret;
-}
-
 static int sr030pc30_set_flip(struct v4l2_subdev *sd)
 {
 	struct sr030pc30_info *info = to_sr030pc30(sd);
@@ -498,107 +418,56 @@ static int sr030pc30_try_frame_size(struct v4l2_mbus_framefmt *mf)
 	return -EINVAL;
 }
 
-static int sr030pc30_queryctrl(struct v4l2_subdev *sd,
-			       struct v4l2_queryctrl *qc)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++)
-		if (qc->id == sr030pc30_ctrl[i].id) {
-			*qc = sr030pc30_ctrl[i];
-			v4l2_dbg(1, debug, sd, "%s id: %d\n",
-				 __func__, qc->id);
-			return 0;
-		}
-
-	return -EINVAL;
-}
-
-static inline int sr030pc30_set_bluebalance(struct v4l2_subdev *sd, int value)
-{
-	int ret = cam_i2c_write(sd, MWB_BGAIN_REG, value);
-	if (!ret)
-		to_sr030pc30(sd)->blue_balance = value;
-	return ret;
-}
-
-static inline int sr030pc30_set_redbalance(struct v4l2_subdev *sd, int value)
-{
-	int ret = cam_i2c_write(sd, MWB_RGAIN_REG, value);
-	if (!ret)
-		to_sr030pc30(sd)->red_balance = value;
-	return ret;
-}
-
-static int sr030pc30_s_ctrl(struct v4l2_subdev *sd,
-			    struct v4l2_control *ctrl)
+static int sr030pc30_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	int i, ret = 0;
-
-	for (i = 0; i < ARRAY_SIZE(sr030pc30_ctrl); i++)
-		if (ctrl->id == sr030pc30_ctrl[i].id)
-			break;
-
-	if (i == ARRAY_SIZE(sr030pc30_ctrl))
-		return -EINVAL;
-
-	if (ctrl->value < sr030pc30_ctrl[i].minimum ||
-		ctrl->value > sr030pc30_ctrl[i].maximum)
-			return -ERANGE;
+	struct sr030pc30_info *info =
+		container_of(ctrl->handler, struct sr030pc30_info, hdl);
+	struct v4l2_subdev *sd = &info->sd;
+	int ret = 0;
 
 	v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n",
-			 __func__, ctrl->id, ctrl->value);
+			 __func__, ctrl->id, ctrl->val);
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUTO_WHITE_BALANCE:
-		sr030pc30_enable_autowhitebalance(sd, ctrl->value);
-		break;
-	case V4L2_CID_BLUE_BALANCE:
-		ret = sr030pc30_set_bluebalance(sd, ctrl->value);
-		break;
-	case V4L2_CID_RED_BALANCE:
-		ret = sr030pc30_set_redbalance(sd, ctrl->value);
-		break;
-	case V4L2_CID_EXPOSURE_AUTO:
-		sr030pc30_enable_autoexposure(sd,
-			ctrl->value == V4L2_EXPOSURE_AUTO);
-		break;
-	case V4L2_CID_EXPOSURE:
-		ret = sr030pc30_set_exposure(sd, ctrl->value);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	return ret;
-}
-
-static int sr030pc30_g_ctrl(struct v4l2_subdev *sd,
-			    struct v4l2_control *ctrl)
-{
-	struct sr030pc30_info *info = to_sr030pc30(sd);
-
-	v4l2_dbg(1, debug, sd, "%s: id: %d\n", __func__, ctrl->id);
+		if (ctrl->is_new) {
+			ret = cam_i2c_write(sd, AWB_CTL2_REG,
+					ctrl->val ? 0x2E : 0x2F);
+			if (!ret)
+				ret = cam_i2c_write(sd, AWB_CTL1_REG,
+						ctrl->val ? 0xFB : 0x7B);
+		}
+		if (!ret && info->blue->is_new)
+			ret = cam_i2c_write(sd, MWB_BGAIN_REG, info->blue->val);
+		if (!ret && info->red->is_new)
+			ret = cam_i2c_write(sd, MWB_RGAIN_REG, info->red->val);
+		return ret;
 
-	switch (ctrl->id) {
-	case V4L2_CID_AUTO_WHITE_BALANCE:
-		ctrl->value = info->auto_wb;
-		break;
-	case V4L2_CID_BLUE_BALANCE:
-		ctrl->value = info->blue_balance;
-		break;
-	case V4L2_CID_RED_BALANCE:
-		ctrl->value = info->red_balance;
-		break;
 	case V4L2_CID_EXPOSURE_AUTO:
-		ctrl->value = info->auto_exp;
-		break;
-	case V4L2_CID_EXPOSURE:
-		ctrl->value = info->exposure;
-		break;
+		/* auto anti-flicker is also enabled here */
+		if (ctrl->is_new)
+			ret = cam_i2c_write(sd, AE_CTL1_REG,
+				ctrl->val == V4L2_EXPOSURE_AUTO ? 0xDC : 0x0C);
+		if (info->exp->is_new) {
+			unsigned long expos = info->exp->val;
+
+			expos = expos * info->pdata->clk_rate / (8 * 1000);
+
+			if (!ret)
+				ret = cam_i2c_write(sd, EXP_TIMEH_REG,
+						expos >> 16 & 0xFF);
+			if (!ret)
+				ret = cam_i2c_write(sd, EXP_TIMEM_REG,
+						expos >> 8 & 0xFF);
+			if (!ret)
+				ret = cam_i2c_write(sd, EXP_TIMEL_REG,
+						expos & 0xFF);
+		}
+		return ret;
 	default:
 		return -EINVAL;
 	}
+
 	return 0;
 }
 
@@ -752,11 +621,19 @@ static int sr030pc30_s_power(struct v4l2_subdev *sd, int on)
 	return ret;
 }
 
+static const struct v4l2_ctrl_ops sr030pc30_ctrl_ops = {
+	.s_ctrl = sr030pc30_s_ctrl,
+};
+
 static const struct v4l2_subdev_core_ops sr030pc30_core_ops = {
 	.s_power	= sr030pc30_s_power,
-	.queryctrl	= sr030pc30_queryctrl,
-	.s_ctrl		= sr030pc30_s_ctrl,
-	.g_ctrl		= sr030pc30_g_ctrl,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
 };
 
 static const struct v4l2_subdev_video_ops sr030pc30_video_ops = {
@@ -807,6 +684,7 @@ static int sr030pc30_probe(struct i2c_client *client,
 {
 	struct sr030pc30_info *info;
 	struct v4l2_subdev *sd;
+	struct v4l2_ctrl_handler *hdl;
 	const struct sr030pc30_platform_data *pdata
 		= client->dev.platform_data;
 	int ret;
@@ -830,10 +708,31 @@ static int sr030pc30_probe(struct i2c_client *client,
 
 	v4l2_i2c_subdev_init(sd, client, &sr030pc30_ops);
 
+	hdl = &info->hdl;
+	v4l2_ctrl_handler_init(hdl, 6);
+	info->awb = v4l2_ctrl_new_std(hdl, &sr030pc30_ctrl_ops,
+			V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
+	info->red = v4l2_ctrl_new_std(hdl, &sr030pc30_ctrl_ops,
+			V4L2_CID_RED_BALANCE, 0, 127, 1, 64);
+	info->blue = v4l2_ctrl_new_std(hdl, &sr030pc30_ctrl_ops,
+			V4L2_CID_BLUE_BALANCE, 0, 127, 1, 64);
+	info->autoexp = v4l2_ctrl_new_std(hdl, &sr030pc30_ctrl_ops,
+			V4L2_CID_EXPOSURE_AUTO, 0, 1, 1, 1);
+	info->exp = v4l2_ctrl_new_std(hdl, &sr030pc30_ctrl_ops,
+			V4L2_CID_EXPOSURE, EXPOS_MIN_MS, EXPOS_MAX_MS, 1, 30);
+	sd->ctrl_handler = hdl;
+	if (hdl->error) {
+		int err = hdl->error;
+
+		v4l2_ctrl_handler_free(hdl);
+		return err;
+	}
+	v4l2_ctrl_auto_cluster(3, &info->awb, 0, false);
+	v4l2_ctrl_auto_cluster(2, &info->autoexp, V4L2_EXPOSURE_MANUAL, false);
+	v4l2_ctrl_handler_setup(hdl);
+
 	info->i2c_reg_page	= -1;
 	info->hflip		= 1;
-	info->auto_exp		= 1;
-	info->exposure		= 30;
 
 	return 0;
 }

drivers/media/i2c/sr030pc30.c static int sr030pc30_remove(struct i2c_client *client) · line 747

Quoted 6 lines
drivers/media/i2c/sr030pc30.c +1 -0
@@ -843,6 +742,7 @@ static int sr030pc30_remove(struct i2c_client *client)
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 
 	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(sd->ctrl_handler);
 	return 0;
 }

--
Thanks & Regards,
Sylwester

#4 lore raw

PATCH 3/21 saa6752hs: convert to the control framework.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

---
 drivers/media/pci/saa7134/saa6752hs.c |  457 +++++++++------------------------
 1 file changed, 122 insertions(+), 335 deletions(-)
drivers/media/pci/saa7134/saa6752hs.c +122 -335
index f147b05..5813ce8 100644
@@ -34,6 +34,7 @@
 #include <linux/types.h>
 #include <linux/videodev2.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
 #include <media/v4l2-common.h>
 #include <media/v4l2-chip-ident.h>
 #include <linux/init.h>
@@ -92,6 +93,12 @@ static const struct v4l2_format v4l2_format_table[] =
 
 struct saa6752hs_state {
 	struct v4l2_subdev            sd;
+	struct v4l2_ctrl_handler      hdl;
+	struct { /* video bitrate mode control cluster */
+		struct v4l2_ctrl *video_bitrate_mode;
+		struct v4l2_ctrl *video_bitrate;
+		struct v4l2_ctrl *video_bitrate_peak;
+	};
 	int 			      chip;
 	u32 			      revision;
 	int 			      has_ac3;
@@ -362,316 +369,72 @@ static int saa6752hs_set_bitrate(struct i2c_client *client,
 	return 0;
 }
 
-
-static int get_ctrl(int has_ac3, struct saa6752hs_mpeg_params *params,
-		struct v4l2_ext_control *ctrl)
+static int saa6752hs_try_ctrl(struct v4l2_ctrl *ctrl)
 {
+	struct saa6752hs_state *h =
+		container_of(ctrl->handler, struct saa6752hs_state, hdl);
+
 	switch (ctrl->id) {
-	case V4L2_CID_MPEG_STREAM_TYPE:
-		ctrl->value = V4L2_MPEG_STREAM_TYPE_MPEG2_TS;
-		break;
-	case V4L2_CID_MPEG_STREAM_PID_PMT:
-		ctrl->value = params->ts_pid_pmt;
-		break;
-	case V4L2_CID_MPEG_STREAM_PID_AUDIO:
-		ctrl->value = params->ts_pid_audio;
-		break;
-	case V4L2_CID_MPEG_STREAM_PID_VIDEO:
-		ctrl->value = params->ts_pid_video;
-		break;
-	case V4L2_CID_MPEG_STREAM_PID_PCR:
-		ctrl->value = params->ts_pid_pcr;
-		break;
-	case V4L2_CID_MPEG_AUDIO_ENCODING:
-		ctrl->value = params->au_encoding;
-		break;
-	case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
-		ctrl->value = params->au_l2_bitrate;
-		break;
-	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
-		if (!has_ac3)
-			return -EINVAL;
-		ctrl->value = params->au_ac3_bitrate;
-		break;
-	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
-		ctrl->value = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000;
-		break;
-	case V4L2_CID_MPEG_VIDEO_ENCODING:
-		ctrl->value = V4L2_MPEG_VIDEO_ENCODING_MPEG_2;
-		break;
-	case V4L2_CID_MPEG_VIDEO_ASPECT:
-		ctrl->value = params->vi_aspect;
-		break;
-	case V4L2_CID_MPEG_VIDEO_BITRATE:
-		ctrl->value = params->vi_bitrate * 1000;
-		break;
-	case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK:
-		ctrl->value = params->vi_bitrate_peak * 1000;
-		break;
 	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
-		ctrl->value = params->vi_bitrate_mode;
+		/* peak bitrate shall be >= normal bitrate */
+		if (ctrl->val == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR &&
+		    h->video_bitrate_peak->val < h->video_bitrate->val)
+			h->video_bitrate_peak->val = h->video_bitrate->val;
 		break;
-	default:
-		return -EINVAL;
 	}
 	return 0;
 }
 
-static int handle_ctrl(int has_ac3, struct saa6752hs_mpeg_params *params,
-		struct v4l2_ext_control *ctrl, int set)
+static int saa6752hs_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	int old = 0, new;
+	struct saa6752hs_state *h =
+		container_of(ctrl->handler, struct saa6752hs_state, hdl);
+	struct saa6752hs_mpeg_params *params = &h->params;
 
-	new = ctrl->value;
 	switch (ctrl->id) {
 	case V4L2_CID_MPEG_STREAM_TYPE:
-		old = V4L2_MPEG_STREAM_TYPE_MPEG2_TS;
-		if (set && new != old)
-			return -ERANGE;
-		new = old;
 		break;
 	case V4L2_CID_MPEG_STREAM_PID_PMT:
-		old = params->ts_pid_pmt;
-		if (set && new > MPEG_PID_MAX)
-			return -ERANGE;
-		if (new > MPEG_PID_MAX)
-			new = MPEG_PID_MAX;
-		params->ts_pid_pmt = new;
+		params->ts_pid_pmt = ctrl->val;
 		break;
 	case V4L2_CID_MPEG_STREAM_PID_AUDIO:
-		old = params->ts_pid_audio;
-		if (set && new > MPEG_PID_MAX)
-			return -ERANGE;
-		if (new > MPEG_PID_MAX)
-			new = MPEG_PID_MAX;
-		params->ts_pid_audio = new;
+		params->ts_pid_audio = ctrl->val;
 		break;
 	case V4L2_CID_MPEG_STREAM_PID_VIDEO:
-		old = params->ts_pid_video;
-		if (set && new > MPEG_PID_MAX)
-			return -ERANGE;
-		if (new > MPEG_PID_MAX)
-			new = MPEG_PID_MAX;
-		params->ts_pid_video = new;
+		params->ts_pid_video = ctrl->val;
 		break;
 	case V4L2_CID_MPEG_STREAM_PID_PCR:
-		old = params->ts_pid_pcr;
-		if (set && new > MPEG_PID_MAX)
-			return -ERANGE;
-		if (new > MPEG_PID_MAX)
-			new = MPEG_PID_MAX;
-		params->ts_pid_pcr = new;
+		params->ts_pid_pcr = ctrl->val;
 		break;
 	case V4L2_CID_MPEG_AUDIO_ENCODING:
-		old = params->au_encoding;
-		if (set && new != V4L2_MPEG_AUDIO_ENCODING_LAYER_2 &&
-		    (!has_ac3 || new != V4L2_MPEG_AUDIO_ENCODING_AC3))
-			return -ERANGE;
-		params->au_encoding = new;
+		params->au_encoding = ctrl->val;
 		break;
 	case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
-		old = params->au_l2_bitrate;
-		if (set && new != V4L2_MPEG_AUDIO_L2_BITRATE_256K &&
-			   new != V4L2_MPEG_AUDIO_L2_BITRATE_384K)
-			return -ERANGE;
-		if (new <= V4L2_MPEG_AUDIO_L2_BITRATE_256K)
-			new = V4L2_MPEG_AUDIO_L2_BITRATE_256K;
-		else
-			new = V4L2_MPEG_AUDIO_L2_BITRATE_384K;
-		params->au_l2_bitrate = new;
+		params->au_l2_bitrate = ctrl->val;
 		break;
 	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
-		if (!has_ac3)
-			return -EINVAL;
-		old = params->au_ac3_bitrate;
-		if (set && new != V4L2_MPEG_AUDIO_AC3_BITRATE_256K &&
-			   new != V4L2_MPEG_AUDIO_AC3_BITRATE_384K)
-			return -ERANGE;
-		if (new <= V4L2_MPEG_AUDIO_AC3_BITRATE_256K)
-			new = V4L2_MPEG_AUDIO_AC3_BITRATE_256K;
-		else
-			new = V4L2_MPEG_AUDIO_AC3_BITRATE_384K;
-		params->au_ac3_bitrate = new;
+		params->au_ac3_bitrate = ctrl->val;
 		break;
 	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
-		old = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000;
-		if (set && new != old)
-			return -ERANGE;
-		new = old;
 		break;
 	case V4L2_CID_MPEG_VIDEO_ENCODING:
-		old = V4L2_MPEG_VIDEO_ENCODING_MPEG_2;
-		if (set && new != old)
-			return -ERANGE;
-		new = old;
 		break;
 	case V4L2_CID_MPEG_VIDEO_ASPECT:
-		old = params->vi_aspect;
-		if (set && new != V4L2_MPEG_VIDEO_ASPECT_16x9 &&
-			   new != V4L2_MPEG_VIDEO_ASPECT_4x3)
-			return -ERANGE;
-		if (new != V4L2_MPEG_VIDEO_ASPECT_16x9)
-			new = V4L2_MPEG_VIDEO_ASPECT_4x3;
-		params->vi_aspect = new;
-		break;
-	case V4L2_CID_MPEG_VIDEO_BITRATE:
-		old = params->vi_bitrate * 1000;
-		new = 1000 * (new / 1000);
-		if (set && new > MPEG_VIDEO_TARGET_BITRATE_MAX * 1000)
-			return -ERANGE;
-		if (new > MPEG_VIDEO_TARGET_BITRATE_MAX * 1000)
-			new = MPEG_VIDEO_TARGET_BITRATE_MAX * 1000;
-		params->vi_bitrate = new / 1000;
-		break;
-	case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK:
-		old = params->vi_bitrate_peak * 1000;
-		new = 1000 * (new / 1000);
-		if (set && new > MPEG_VIDEO_TARGET_BITRATE_MAX * 1000)
-			return -ERANGE;
-		if (new > MPEG_VIDEO_TARGET_BITRATE_MAX * 1000)
-			new = MPEG_VIDEO_TARGET_BITRATE_MAX * 1000;
-		params->vi_bitrate_peak = new / 1000;
+		params->vi_aspect = ctrl->val;
 		break;
 	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
-		old = params->vi_bitrate_mode;
-		params->vi_bitrate_mode = new;
+		params->vi_bitrate_mode = ctrl->val;
+		params->vi_bitrate = h->video_bitrate->val / 1000;
+		params->vi_bitrate_peak = h->video_bitrate_peak->val / 1000;
+		v4l2_ctrl_activate(h->video_bitrate_peak,
+				ctrl->val == V4L2_MPEG_VIDEO_BITRATE_MODE_VBR);
 		break;
 	default:
 		return -EINVAL;
 	}
-	ctrl->value = new;
 	return 0;
 }
 
-
-static int saa6752hs_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qctrl)
-{
-	struct saa6752hs_state *h = to_state(sd);
-	struct saa6752hs_mpeg_params *params = &h->params;
-	int err;
-
-	switch (qctrl->id) {
-	case V4L2_CID_MPEG_AUDIO_ENCODING:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
-				h->has_ac3 ? V4L2_MPEG_AUDIO_ENCODING_AC3 :
-					V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
-				1, V4L2_MPEG_AUDIO_ENCODING_LAYER_2);
-
-	case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_AUDIO_L2_BITRATE_256K,
-				V4L2_MPEG_AUDIO_L2_BITRATE_384K, 1,
-				V4L2_MPEG_AUDIO_L2_BITRATE_256K);
-
-	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
-		if (!h->has_ac3)
-			return -EINVAL;
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_AUDIO_AC3_BITRATE_256K,
-				V4L2_MPEG_AUDIO_AC3_BITRATE_384K, 1,
-				V4L2_MPEG_AUDIO_AC3_BITRATE_256K);
-
-	case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000,
-				V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000, 1,
-				V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000);
-
-	case V4L2_CID_MPEG_VIDEO_ENCODING:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_VIDEO_ENCODING_MPEG_2,
-				V4L2_MPEG_VIDEO_ENCODING_MPEG_2, 1,
-				V4L2_MPEG_VIDEO_ENCODING_MPEG_2);
-
-	case V4L2_CID_MPEG_VIDEO_ASPECT:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_VIDEO_ASPECT_4x3,
-				V4L2_MPEG_VIDEO_ASPECT_16x9, 1,
-				V4L2_MPEG_VIDEO_ASPECT_4x3);
-
-	case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK:
-		err = v4l2_ctrl_query_fill(qctrl, 0, 27000000, 1, 8000000);
-		if (err == 0 &&
-		    params->vi_bitrate_mode ==
-				V4L2_MPEG_VIDEO_BITRATE_MODE_CBR)
-			qctrl->flags |= V4L2_CTRL_FLAG_INACTIVE;
-		return err;
-
-	case V4L2_CID_MPEG_STREAM_TYPE:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_STREAM_TYPE_MPEG2_TS,
-				V4L2_MPEG_STREAM_TYPE_MPEG2_TS, 1,
-				V4L2_MPEG_STREAM_TYPE_MPEG2_TS);
-
-	case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
-		return v4l2_ctrl_query_fill(qctrl,
-				V4L2_MPEG_VIDEO_BITRATE_MODE_VBR,
-				V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 1,
-				V4L2_MPEG_VIDEO_BITRATE_MODE_VBR);
-	case V4L2_CID_MPEG_VIDEO_BITRATE:
-		return v4l2_ctrl_query_fill(qctrl, 0, 27000000, 1, 6000000);
-	case V4L2_CID_MPEG_STREAM_PID_PMT:
-		return v4l2_ctrl_query_fill(qctrl, 0, (1 << 14) - 1, 1, 16);
-	case V4L2_CID_MPEG_STREAM_PID_AUDIO:
-		return v4l2_ctrl_query_fill(qctrl, 0, (1 << 14) - 1, 1, 260);
-	case V4L2_CID_MPEG_STREAM_PID_VIDEO:
-		return v4l2_ctrl_query_fill(qctrl, 0, (1 << 14) - 1, 1, 256);
-	case V4L2_CID_MPEG_STREAM_PID_PCR:
-		return v4l2_ctrl_query_fill(qctrl, 0, (1 << 14) - 1, 1, 259);
-
-	default:
-		break;
-	}
-	return -EINVAL;
-}
-
-static int saa6752hs_querymenu(struct v4l2_subdev *sd, struct v4l2_querymenu *qmenu)
-{
-	static const u32 mpeg_audio_encoding[] = {
-		V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
-		V4L2_CTRL_MENU_IDS_END
-	};
-	static const u32 mpeg_audio_ac3_encoding[] = {
-		V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
-		V4L2_MPEG_AUDIO_ENCODING_AC3,
-		V4L2_CTRL_MENU_IDS_END
-	};
-	static u32 mpeg_audio_l2_bitrate[] = {
-		V4L2_MPEG_AUDIO_L2_BITRATE_256K,
-		V4L2_MPEG_AUDIO_L2_BITRATE_384K,
-		V4L2_CTRL_MENU_IDS_END
-	};
-	static u32 mpeg_audio_ac3_bitrate[] = {
-		V4L2_MPEG_AUDIO_AC3_BITRATE_256K,
-		V4L2_MPEG_AUDIO_AC3_BITRATE_384K,
-		V4L2_CTRL_MENU_IDS_END
-	};
-	struct saa6752hs_state *h = to_state(sd);
-	struct v4l2_queryctrl qctrl;
-	int err;
-
-	qctrl.id = qmenu->id;
-	err = saa6752hs_queryctrl(sd, &qctrl);
-	if (err)
-		return err;
-	switch (qmenu->id) {
-	case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
-		return v4l2_ctrl_query_menu_valid_items(qmenu,
-				mpeg_audio_l2_bitrate);
-	case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
-		if (!h->has_ac3)
-			return -EINVAL;
-		return v4l2_ctrl_query_menu_valid_items(qmenu,
-				mpeg_audio_ac3_bitrate);
-	case V4L2_CID_MPEG_AUDIO_ENCODING:
-		return v4l2_ctrl_query_menu_valid_items(qmenu,
-			h->has_ac3 ? mpeg_audio_ac3_encoding :
-				mpeg_audio_encoding);
-	}
-	return v4l2_ctrl_query_menu(qmenu, &qctrl, NULL);
-}
-
 static int saa6752hs_init(struct v4l2_subdev *sd, u32 leading_null_bytes)
 {
 	unsigned char buf[9], buf2[4];
@@ -793,58 +556,6 @@ static int saa6752hs_init(struct v4l2_subdev *sd, u32 leading_null_bytes)
 	return 0;
 }
 
-static int saa6752hs_do_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls, int set)
-{
-	struct saa6752hs_state *h = to_state(sd);
-	struct saa6752hs_mpeg_params params;
-	int i;
-
-	if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG)
-		return -EINVAL;
-
-	params = h->params;
-	for (i = 0; i < ctrls->count; i++) {
-		int err = handle_ctrl(h->has_ac3, &params, ctrls->controls + i, set);
-
-		if (err) {
-			ctrls->error_idx = i;
-			return err;
-		}
-	}
-	if (set)
-		h->params = params;
-	return 0;
-}
-
-static int saa6752hs_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls)
-{
-	return saa6752hs_do_ext_ctrls(sd, ctrls, 1);
-}
-
-static int saa6752hs_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls)
-{
-	return saa6752hs_do_ext_ctrls(sd, ctrls, 0);
-}
-
-static int saa6752hs_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *ctrls)
-{
-	struct saa6752hs_state *h = to_state(sd);
-	int i;
-
-	if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG)
-		return -EINVAL;
-
-	for (i = 0; i < ctrls->count; i++) {
-		int err = get_ctrl(h->has_ac3, &h->params, ctrls->controls + i);
-
-		if (err) {
-			ctrls->error_idx = i;
-			return err;
-		}
-	}
-	return 0;
-}
-
 static int saa6752hs_g_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *f)
 {
 	struct saa6752hs_state *h = to_state(sd);
@@ -925,14 +636,21 @@ static int saa6752hs_g_chip_ident(struct v4l2_subdev *sd, struct v4l2_dbg_chip_i
 
 /* ----------------------------------------------------------------------- */
 
+static const struct v4l2_ctrl_ops saa6752hs_ctrl_ops = {
+	.try_ctrl = saa6752hs_try_ctrl,
+	.s_ctrl = saa6752hs_s_ctrl,
+};
+
 static const struct v4l2_subdev_core_ops saa6752hs_core_ops = {
 	.g_chip_ident = saa6752hs_g_chip_ident,
 	.init = saa6752hs_init,
-	.queryctrl = saa6752hs_queryctrl,
-	.querymenu = saa6752hs_querymenu,
-	.g_ext_ctrls = saa6752hs_g_ext_ctrls,
-	.s_ext_ctrls = saa6752hs_s_ext_ctrls,
-	.try_ext_ctrls = saa6752hs_try_ext_ctrls,
+	.g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+	.try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+	.s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+	.g_ctrl = v4l2_subdev_g_ctrl,
+	.s_ctrl = v4l2_subdev_s_ctrl,
+	.queryctrl = v4l2_subdev_queryctrl,
+	.querymenu = v4l2_subdev_querymenu,
 	.s_std = saa6752hs_s_std,
 };
 
@@ -951,6 +669,7 @@ static int saa6752hs_probe(struct i2c_client *client,
 {
 	struct saa6752hs_state *h = kzalloc(sizeof(*h), GFP_KERNEL);
 	struct v4l2_subdev *sd;
+	struct v4l2_ctrl_handler *hdl;
 	u8 addr = 0x13;
 	u8 data[12];
 
@@ -969,9 +688,84 @@ static int saa6752hs_probe(struct i2c_client *client,
 	if (h->revision == 0x0206) {
 		h->chip = V4L2_IDENT_SAA6752HS_AC3;
 		h->has_ac3 = 1;
-		v4l_info(client, "support AC-3\n");
+		v4l_info(client, "supports AC-3\n");
 	}
 	h->params = param_defaults;
+
+	hdl = &h->hdl;
+	v4l2_ctrl_handler_init(hdl, 14);
+	v4l2_ctrl_new_std_menu(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_AUDIO_ENCODING,
+		h->has_ac3 ? V4L2_MPEG_AUDIO_ENCODING_AC3 :
+			V4L2_MPEG_AUDIO_ENCODING_LAYER_2,
+		0x0d, V4L2_MPEG_AUDIO_ENCODING_LAYER_2);
+
+	v4l2_ctrl_new_std_menu(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_AUDIO_L2_BITRATE,
+		V4L2_MPEG_AUDIO_L2_BITRATE_384K,
+		~((1 << V4L2_MPEG_AUDIO_L2_BITRATE_256K) |
+		  (1 << V4L2_MPEG_AUDIO_L2_BITRATE_384K)),
+		V4L2_MPEG_AUDIO_L2_BITRATE_256K);
+
+	if (h->has_ac3)
+		v4l2_ctrl_new_std_menu(hdl, &saa6752hs_ctrl_ops,
+			V4L2_CID_MPEG_AUDIO_AC3_BITRATE,
+			V4L2_MPEG_AUDIO_AC3_BITRATE_384K,
+			~((1 << V4L2_MPEG_AUDIO_AC3_BITRATE_256K) |
+			  (1 << V4L2_MPEG_AUDIO_AC3_BITRATE_384K)),
+			V4L2_MPEG_AUDIO_AC3_BITRATE_256K);
+
+	v4l2_ctrl_new_std_menu(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ,
+		V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000,
+		~(1 << V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000),
+		V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000);
+
+	v4l2_ctrl_new_std_menu(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_VIDEO_ENCODING,
+		V4L2_MPEG_VIDEO_ENCODING_MPEG_2,
+		~(1 << V4L2_MPEG_VIDEO_ENCODING_MPEG_2),
+		V4L2_MPEG_VIDEO_ENCODING_MPEG_2);
+
+	v4l2_ctrl_new_std_menu(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_VIDEO_ASPECT,
+		V4L2_MPEG_VIDEO_ASPECT_16x9, 0x01,
+		V4L2_MPEG_VIDEO_ASPECT_4x3);
+
+	h->video_bitrate_peak = v4l2_ctrl_new_std(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_VIDEO_BITRATE_PEAK,
+		1000000, 27000000, 1000, 8000000);
+
+	v4l2_ctrl_new_std_menu(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_STREAM_TYPE,
+		V4L2_MPEG_STREAM_TYPE_MPEG2_TS,
+		~(1 << V4L2_MPEG_STREAM_TYPE_MPEG2_TS),
+		V4L2_MPEG_STREAM_TYPE_MPEG2_TS);
+
+	h->video_bitrate_mode = v4l2_ctrl_new_std_menu(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_VIDEO_BITRATE_MODE,
+		V4L2_MPEG_VIDEO_BITRATE_MODE_CBR, 0,
+		V4L2_MPEG_VIDEO_BITRATE_MODE_VBR);
+	h->video_bitrate = v4l2_ctrl_new_std(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_VIDEO_BITRATE, 1000000, 27000000, 1000, 6000000);
+	v4l2_ctrl_new_std(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_STREAM_PID_PMT, 0, (1 << 14) - 1, 1, 16);
+	v4l2_ctrl_new_std(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_STREAM_PID_AUDIO, 0, (1 << 14) - 1, 1, 260);
+	v4l2_ctrl_new_std(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_STREAM_PID_VIDEO, 0, (1 << 14) - 1, 1, 256);
+	v4l2_ctrl_new_std(hdl, &saa6752hs_ctrl_ops,
+		V4L2_CID_MPEG_STREAM_PID_PCR, 0, (1 << 14) - 1, 1, 259);
+	sd->ctrl_handler = hdl;
+	if (hdl->error) {
+		int err = hdl->error;
+
+		v4l2_ctrl_handler_free(hdl);
+		kfree(h);
+		return err;
+	}
+	v4l2_ctrl_cluster(3, &h->video_bitrate_mode);
+	v4l2_ctrl_handler_setup(hdl);
 	h->standard = 0; /* Assume 625 input lines */
 	return 0;
 }
@@ -981,6 +775,7 @@ static int saa6752hs_remove(struct i2c_client *client)
 	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 
 	v4l2_device_unregister_subdev(sd);
+	v4l2_ctrl_handler_free(&to_state(sd)->hdl);
 	kfree(to_state(sd));
 	return 0;
 }
@@ -1002,11 +797,3 @@ static struct i2c_driver saa6752hs_driver = {
 };
 
 module_i2c_driver(saa6752hs_driver);
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-basic-offset: 8
- * End:
- */
Signature · 1 line
1.7.10.4
#5 lore raw

PATCH 4/21 radio-tea5764: add support for struct v4l2_device.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

Cc Fabio Belavenuto <[email protected]>
---
 drivers/media/radio/radio-tea5764.c |   22 +++++++++++++++++-----
 1 file changed, 17 insertions(+), 5 deletions(-)
drivers/media/radio/radio-tea5764.c +17 -5
index 38d563d..f6a5471 100644
@@ -39,6 +39,7 @@
 #include <linux/i2c.h>			/* I2C				*/
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
+#include <media/v4l2-device.h>
 
 #define DRIVER_VERSION	"0.0.2"
 
@@ -138,6 +139,7 @@ static int radio_nr = -1;
 static int use_xtal = RADIO_TEA5764_XTAL;
 
 struct tea5764_device {
+	struct v4l2_device v4l2_dev;
 	struct i2c_client		*i2c_client;
 	struct video_device		*videodev;
 	struct tea5764_regs		regs;
@@ -497,6 +499,7 @@ static int tea5764_i2c_probe(struct i2c_client *client,
 			     const struct i2c_device_id *id)
 {
 	struct tea5764_device *radio;
+	struct v4l2_device *v4l2_dev;
 	struct tea5764_regs *r;
 	int ret;
 
@@ -505,31 +508,37 @@ static int tea5764_i2c_probe(struct i2c_client *client,
 	if (!radio)
 		return -ENOMEM;
 
+	v4l2_dev = &radio->v4l2_dev;
+	ret = v4l2_device_register(&client->dev, v4l2_dev);
+	if (ret < 0) {
+		v4l2_err(v4l2_dev, "could not register v4l2_device\n");
+		goto errfr;
+	}
 	mutex_init(&radio->mutex);
 	radio->i2c_client = client;
 	ret = tea5764_i2c_read(radio);
 	if (ret)
-		goto errfr;
+		goto errunreg;
 	r = &radio->regs;
 	PDEBUG("chipid = %04X, manid = %04X", r->chipid, r->manid);
 	if (r->chipid != TEA5764_CHIPID ||
 		(r->manid & 0x0fff) != TEA5764_MANID) {
 		PWARN("This chip is not a TEA5764!");
 		ret = -EINVAL;
-		goto errfr;
+		goto errunreg;
 	}
 
 	radio->videodev = video_device_alloc();
 	if (!(radio->videodev)) {
 		ret = -ENOMEM;
-		goto errfr;
+		goto errunreg;
 	}
-	memcpy(radio->videodev, &tea5764_radio_template,
-		sizeof(tea5764_radio_template));
+	*radio->videodev = tea5764_radio_template;
 
 	i2c_set_clientdata(client, radio);
 	video_set_drvdata(radio->videodev, radio);
 	radio->videodev->lock = &radio->mutex;
+	radio->videodev->v4l2_dev = v4l2_dev;
 
 	/* initialize and power off the chip */
 	tea5764_i2c_read(radio);
@@ -547,6 +556,8 @@ static int tea5764_i2c_probe(struct i2c_client *client,
 	return 0;
 errrel:
 	video_device_release(radio->videodev);
+errunreg:
+	v4l2_device_unregister(v4l2_dev);
 errfr:
 	kfree(radio);
 	return ret;
@@ -560,6 +571,7 @@ static int tea5764_i2c_remove(struct i2c_client *client)
 	if (radio) {
 		tea5764_power_down(radio);
 		video_unregister_device(radio->videodev);
+		v4l2_device_unregister(&radio->v4l2_dev);
 		kfree(radio);
 	}
 	return 0;
Signature · 1 line
1.7.10.4
#6 lore raw

PATCH 5/21 radio-tea5764: embed struct video_device.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

This simplifies the code as it removes a memory allocation check.

Cc Fabio Belavenuto <[email protected]>
---
 drivers/media/radio/radio-tea5764.c |   27 ++++++++++-----------------
 1 file changed, 10 insertions(+), 17 deletions(-)
drivers/media/radio/radio-tea5764.c +10 -17
index f6a5471..4e0bf64 100644
@@ -141,7 +141,7 @@ static int use_xtal = RADIO_TEA5764_XTAL;
 struct tea5764_device {
 	struct v4l2_device v4l2_dev;
 	struct i2c_client		*i2c_client;
-	struct video_device		*videodev;
+	struct video_device		vdev;
 	struct tea5764_regs		regs;
 	struct mutex			mutex;
 };
@@ -303,7 +303,7 @@ static int vidioc_querycap(struct file *file, void  *priv,
 					struct v4l2_capability *v)
 {
 	struct tea5764_device *radio = video_drvdata(file);
-	struct video_device *dev = radio->videodev;
+	struct video_device *dev = &radio->vdev;
 
 	strlcpy(v->driver, dev->dev.driver->name, sizeof(v->driver));
 	strlcpy(v->card, dev->name, sizeof(v->card));
@@ -491,7 +491,7 @@ static struct video_device tea5764_radio_template = {
 	.name		= "TEA5764 FM-Radio",
 	.fops           = &tea5764_fops,
 	.ioctl_ops 	= &tea5764_ioctl_ops,
-	.release	= video_device_release,
+	.release	= video_device_release_empty,
 };
 
 /* I2C probe: check if the device exists and register with v4l if it is */
@@ -528,17 +528,12 @@ static int tea5764_i2c_probe(struct i2c_client *client,
 		goto errunreg;
 	}
 
-	radio->videodev = video_device_alloc();
-	if (!(radio->videodev)) {
-		ret = -ENOMEM;
-		goto errunreg;
-	}
-	*radio->videodev = tea5764_radio_template;
+	radio->vdev = tea5764_radio_template;
 
 	i2c_set_clientdata(client, radio);
-	video_set_drvdata(radio->videodev, radio);
-	radio->videodev->lock = &radio->mutex;
-	radio->videodev->v4l2_dev = v4l2_dev;
+	video_set_drvdata(&radio->vdev, radio);
+	radio->vdev.lock = &radio->mutex;
+	radio->vdev.v4l2_dev = v4l2_dev;
 
 	/* initialize and power off the chip */
 	tea5764_i2c_read(radio);
@@ -546,16 +541,14 @@ static int tea5764_i2c_probe(struct i2c_client *client,
 	tea5764_mute(radio, 1);
 	tea5764_power_down(radio);
 
-	ret = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
+	ret = video_register_device(&radio->vdev, VFL_TYPE_RADIO, radio_nr);
 	if (ret < 0) {
 		PWARN("Could not register video device!");
-		goto errrel;
+		goto errunreg;
 	}
 
 	PINFO("registered.");
 	return 0;
-errrel:
-	video_device_release(radio->videodev);
 errunreg:
 	v4l2_device_unregister(v4l2_dev);
 errfr:
@@ -570,7 +563,7 @@ static int tea5764_i2c_remove(struct i2c_client *client)
 	PDEBUG("remove");
 	if (radio) {
 		tea5764_power_down(radio);
-		video_unregister_device(radio->videodev);
+		video_unregister_device(&radio->vdev);
 		v4l2_device_unregister(&radio->v4l2_dev);
 		kfree(radio);
 	}
Signature · 1 line
1.7.10.4
#7 lore raw

PATCH 6/21 radio-tea5764: convert to the control framework.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

Cc Fabio Belavenuto <[email protected]>
---
 drivers/media/radio/radio-tea5764.c |   79 ++++++++++++-----------------------
 1 file changed, 26 insertions(+), 53 deletions(-)
drivers/media/radio/radio-tea5764.c +26 -53
index 4e0bf64..5c47a97 100644
@@ -40,6 +40,7 @@
 #include <media/v4l2-common.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
 
 #define DRIVER_VERSION	"0.0.2"
 
@@ -139,7 +140,8 @@ static int radio_nr = -1;
 static int use_xtal = RADIO_TEA5764_XTAL;
 
 struct tea5764_device {
-	struct v4l2_device v4l2_dev;
+	struct v4l2_device		v4l2_dev;
+	struct v4l2_ctrl_handler	ctrl_handler;
 	struct i2c_client		*i2c_client;
 	struct video_device		vdev;
 	struct tea5764_regs		regs;
@@ -189,18 +191,6 @@ static int tea5764_i2c_write(struct tea5764_device *radio)
 	return 0;
 }
 
-/* V4L2 code related */
-static struct v4l2_queryctrl radio_qctrl[] = {
-	{
-		.id            = V4L2_CID_AUDIO_MUTE,
-		.name          = "Mute",
-		.minimum       = 0,
-		.maximum       = 1,
-		.default_value = 1,
-		.type          = V4L2_CTRL_TYPE_BOOLEAN,
-	}
-};
-
 static void tea5764_power_up(struct tea5764_device *radio)
 {
 	struct tea5764_regs *r = &radio->regs;
@@ -293,11 +283,6 @@ static void tea5764_mute(struct tea5764_device *radio, int on)
 		tea5764_i2c_write(radio);
 }
 
-static int tea5764_is_muted(struct tea5764_device *radio)
-{
-	return radio->regs.tnctrl & TEA5764_TNCTRL_MU;
-}
-
 /* V4L2 vidioc */
 static int vidioc_querycap(struct file *file, void  *priv,
 					struct v4l2_capability *v)
@@ -391,42 +376,14 @@ static int vidioc_g_frequency(struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_queryctrl(struct file *file, void *priv,
-			    struct v4l2_queryctrl *qc)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) {
-		if (qc->id && qc->id == radio_qctrl[i].id) {
-			memcpy(qc, &(radio_qctrl[i]), sizeof(*qc));
-			return 0;
-		}
-	}
-	return -EINVAL;
-}
-
-static int vidioc_g_ctrl(struct file *file, void *priv,
-			    struct v4l2_control *ctrl)
-{
-	struct tea5764_device *radio = video_drvdata(file);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		tea5764_i2c_read(radio);
-		ctrl->value = tea5764_is_muted(radio) ? 1 : 0;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-			    struct v4l2_control *ctrl)
+static int tea5764_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	struct tea5764_device *radio = video_drvdata(file);
+	struct tea5764_device *radio =
+		container_of(ctrl->handler, struct tea5764_device, ctrl_handler);
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUDIO_MUTE:
-		tea5764_mute(radio, ctrl->value);
+		tea5764_mute(radio, ctrl->val);
 		return 0;
 	}
 	return -EINVAL;
@@ -465,6 +422,10 @@ static int vidioc_s_audio(struct file *file, void *priv,
 	return 0;
 }
 
+static const struct v4l2_ctrl_ops tea5764_ctrl_ops = {
+	.s_ctrl = tea5764_s_ctrl,
+};
+
 /* File system interface */
 static const struct v4l2_file_operations tea5764_fops = {
 	.owner		= THIS_MODULE,
@@ -481,9 +442,6 @@ static const struct v4l2_ioctl_ops tea5764_ioctl_ops = {
 	.vidioc_s_input     = vidioc_s_input,
 	.vidioc_g_frequency = vidioc_g_frequency,
 	.vidioc_s_frequency = vidioc_s_frequency,
-	.vidioc_queryctrl   = vidioc_queryctrl,
-	.vidioc_g_ctrl      = vidioc_g_ctrl,
-	.vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
 /* V4L2 interface */
@@ -500,6 +458,7 @@ static int tea5764_i2c_probe(struct i2c_client *client,
 {
 	struct tea5764_device *radio;
 	struct v4l2_device *v4l2_dev;
+	struct v4l2_ctrl_handler *hdl;
 	struct tea5764_regs *r;
 	int ret;
 
@@ -514,6 +473,18 @@ static int tea5764_i2c_probe(struct i2c_client *client,
 		v4l2_err(v4l2_dev, "could not register v4l2_device\n");
 		goto errfr;
 	}
+
+	hdl = &radio->ctrl_handler;
+	v4l2_ctrl_handler_init(hdl, 1);
+	v4l2_ctrl_new_std(hdl, &tea5764_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	v4l2_dev->ctrl_handler = hdl;
+	if (hdl->error) {
+		ret = hdl->error;
+		v4l2_err(v4l2_dev, "Could not register controls\n");
+		goto errunreg;
+	}
+
 	mutex_init(&radio->mutex);
 	radio->i2c_client = client;
 	ret = tea5764_i2c_read(radio);
@@ -550,6 +521,7 @@ static int tea5764_i2c_probe(struct i2c_client *client,
 	PINFO("registered.");
 	return 0;
 errunreg:
+	v4l2_ctrl_handler_free(hdl);
 	v4l2_device_unregister(v4l2_dev);
 errfr:
 	kfree(radio);
@@ -564,6 +536,7 @@ static int tea5764_i2c_remove(struct i2c_client *client)
 	if (radio) {
 		tea5764_power_down(radio);
 		video_unregister_device(&radio->vdev);
+		v4l2_ctrl_handler_free(&radio->ctrl_handler);
 		v4l2_device_unregister(&radio->v4l2_dev);
 		kfree(radio);
 	}
Signature · 1 line
1.7.10.4
#8 lore raw

PATCH 7/21 radio-tea5764: audio and input ioctls do not apply to radio devices.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

Deleted those ioctls from this driver.

Cc Fabio Belavenuto <[email protected]>
---
 drivers/media/radio/radio-tea5764.c |   37 -----------------------------------
 1 file changed, 37 deletions(-)
drivers/media/radio/radio-tea5764.c +0 -37
index 5c47a97..5a60990 100644
@@ -389,39 +389,6 @@ static int tea5764_s_ctrl(struct v4l2_ctrl *ctrl)
 	return -EINVAL;
 }
 
-static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
-{
-	*i = 0;
-	return 0;
-}
-
-static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
-{
-	if (i != 0)
-		return -EINVAL;
-	return 0;
-}
-
-static int vidioc_g_audio(struct file *file, void *priv,
-			   struct v4l2_audio *a)
-{
-	if (a->index > 1)
-		return -EINVAL;
-
-	strcpy(a->name, "Radio");
-	a->capability = V4L2_AUDCAP_STEREO;
-	return 0;
-}
-
-static int vidioc_s_audio(struct file *file, void *priv,
-			   const struct v4l2_audio *a)
-{
-	if (a->index != 0)
-		return -EINVAL;
-
-	return 0;
-}
-
 static const struct v4l2_ctrl_ops tea5764_ctrl_ops = {
 	.s_ctrl = tea5764_s_ctrl,
 };
@@ -436,10 +403,6 @@ static const struct v4l2_ioctl_ops tea5764_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
-	.vidioc_g_audio     = vidioc_g_audio,
-	.vidioc_s_audio     = vidioc_s_audio,
-	.vidioc_g_input     = vidioc_g_input,
-	.vidioc_s_input     = vidioc_s_input,
 	.vidioc_g_frequency = vidioc_g_frequency,
 	.vidioc_s_frequency = vidioc_s_frequency,
 };
Signature · 1 line
1.7.10.4
#9 lore raw

PATCH 8/21 radio-tea5764: add device_caps support.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

Cc Fabio Belavenuto <[email protected]>
---
 drivers/media/radio/radio-tea5764.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/radio/radio-tea5764.c +2 -1
index 5a60990..077d906 100644
@@ -294,7 +294,8 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->card, dev->name, sizeof(v->card));
 	snprintf(v->bus_info, sizeof(v->bus_info),
 		 "I2C:%s", dev_name(&dev->dev));
-	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+	v->device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+	v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS;
 	return 0;
 }
 
Signature · 1 line
1.7.10.4
#10 lore raw

PATCH 9/21 radio-tea5764: add prio and control event support.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

Cc Fabio Belavenuto <[email protected]>
---
 drivers/media/radio/radio-tea5764.c |    8 ++++++++
 1 file changed, 8 insertions(+)
drivers/media/radio/radio-tea5764.c +8 -0
index 077d906..c22feed 100644
@@ -41,6 +41,7 @@
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
 
 #define DRIVER_VERSION	"0.0.2"
 
@@ -397,6 +398,9 @@ static const struct v4l2_ctrl_ops tea5764_ctrl_ops = {
 /* File system interface */
 static const struct v4l2_file_operations tea5764_fops = {
 	.owner		= THIS_MODULE,
+	.open		= v4l2_fh_open,
+	.release	= v4l2_fh_release,
+	.poll		= v4l2_ctrl_poll,
 	.unlocked_ioctl	= video_ioctl2,
 };
 
@@ -406,6 +410,9 @@ static const struct v4l2_ioctl_ops tea5764_ioctl_ops = {
 	.vidioc_s_tuner     = vidioc_s_tuner,
 	.vidioc_g_frequency = vidioc_g_frequency,
 	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_log_status  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
 };
 
 /* V4L2 interface */
@@ -469,6 +476,7 @@ static int tea5764_i2c_probe(struct i2c_client *client,
 	video_set_drvdata(&radio->vdev, radio);
 	radio->vdev.lock = &radio->mutex;
 	radio->vdev.v4l2_dev = v4l2_dev;
+	set_bit(V4L2_FL_USE_FH_PRIO, &radio->vdev.flags);
 
 	/* initialize and power off the chip */
 	tea5764_i2c_read(radio);
Signature · 1 line
1.7.10.4
#11 lore raw

PATCH 10/21 radio-tea5764: some cleanups and clamp frequency when out-of-range

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

Some small cleanups and when setting the frequency it is now clamped to the valid frequency range instead of returning an error.

Cc Fabio Belavenuto <[email protected]>
---
 drivers/media/radio/radio-tea5764.c |   24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)
drivers/media/radio/radio-tea5764.c +13 -11
index c22feed..036e2f5 100644
@@ -60,8 +60,8 @@
 
 /* Frequency limits in MHz -- these are European values.  For Japanese
 devices, that would be 76000 and 91000.  */
-#define FREQ_MIN  87500
-#define FREQ_MAX 108000
+#define FREQ_MIN  87500U
+#define FREQ_MAX 108000U
 #define FREQ_MUL 16
 
 /* TEA5764 registers */
@@ -309,8 +309,7 @@ static int vidioc_g_tuner(struct file *file, void *priv,
 	if (v->index > 0)
 		return -EINVAL;
 
-	memset(v, 0, sizeof(*v));
-	strcpy(v->name, "FM");
+	strlcpy(v->name, "FM", sizeof(v->name));
 	v->type = V4L2_TUNER_RADIO;
 	tea5764_i2c_read(radio);
 	v->rangelow   = FREQ_MIN * FREQ_MUL;
@@ -343,19 +342,23 @@ static int vidioc_s_frequency(struct file *file, void *priv,
 				const struct v4l2_frequency *f)
 {
 	struct tea5764_device *radio = video_drvdata(file);
+	unsigned freq = f->frequency;
 
 	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
 		return -EINVAL;
-	if (f->frequency == 0) {
+	if (freq == 0) {
 		/* We special case this as a power down control. */
 		tea5764_power_down(radio);
-	}
-	if (f->frequency < (FREQ_MIN * FREQ_MUL))
-		return -EINVAL;
-	if (f->frequency > (FREQ_MAX * FREQ_MUL))
+		/* Yes, that's what is returned in this case. This
+		   whole special case is non-compliant and should really
+		   be replaced with something better, but changing this
+		   might well break code that depends on this behavior.
+		   So we keep it as-is. */
 		return -EINVAL;
+	}
+	clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL);
 	tea5764_power_up(radio);
-	tea5764_tune(radio, (f->frequency * 125) / 2);
+	tea5764_tune(radio, (freq * 125) / 2);
 	return 0;
 }
 
@@ -368,7 +371,6 @@ static int vidioc_g_frequency(struct file *file, void *priv,
 	if (f->tuner != 0)
 		return -EINVAL;
 	tea5764_i2c_read(radio);
-	memset(f, 0, sizeof(*f));
 	f->type = V4L2_TUNER_RADIO;
 	if (r->tnctrl & TEA5764_TNCTRL_PUPD0)
 		f->frequency = (tea5764_get_freq(radio) * 2) / 125;
Signature · 1 line
1.7.10.4
#12 lore raw

PATCH 10/21 radio-tea5764: some cleanups and clamp frequency when out-of-range AND [PATCH 15/21] tef6862: clamp frequency.

drivers/media/radio/radio-tea5764.c static int vidioc_s_frequency(struct file *file, void *priv, · line 362

Quoted 7 lines · Hans Verkuil

return -EINVAL;

drivers/media/radio/radio-tea5764.c +3 -1
+	}
+	clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL);
  	tea5764_power_up(radio);
-	tea5764_tune(radio, (f->frequency * 125) / 2);
+	tea5764_tune(radio, (freq * 125) / 2);
  	return 0;

Hi Hans,

Should the part quoted above part perhaps read:

freq = clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL);

Or did "#define clamp() change" recently?

http://lxr.free-electrons.com/source/include/linux/kernel.h

Quoted 16 lines

698 /**

699  * clamp - return a value clamped to a given range with strict typechecking
700  * @val: current value
701  * @min: minimum allowable value
702  * @max: maximum allowable value
703  *
704  * This macro does strict typechecking of min/max to make sure they are of the
705  * same type as val.  See the unnecessary pointer comparisons.
706  */
707 #define clamp(val, min, max) ({                 \
708         typeof(val) __val = (val);              \
709         typeof(min) __min = (min);              \
710         typeof(max) __max = (max);              \
711         (void) (&__val == &__min);              \
712         (void) (&__val == &__max);              \
713         __val = __val < __min ? __min: __val;   \
Quoted 1 line

714 __val > __max ? __max: __val; })

Thank you!

Same spotted in:

Quoted 5 lines
Quoted 5 lines

media_tree/drivers/media/radio/radio-tea5764.c: In function 'vidioc_s_frequency':
media_tree/drivers/media/radio/radio-tea5764.c:359: warning: statement with no effect

media_tree/drivers/media/radio/tef6862.c: In function 'tef6862_s_frequency':
media_tree/drivers/media/radio/tef6862.c:115: warning: statement with no effect

Keep up the good work!

--HPS

#13 lore raw

Re: [BUG] [PATCH 10/21] radio-tea5764: some cleanups and clamp frequency when out-of-range AND [PATCH 15/21] tef6862: clamp frequency.

Hi Hans,

Quoted 11 lines · Hans Petter Selasky

drivers/media/radio/radio-tea5764.c static int vidioc_s_frequency(struct file *file, void *priv, · line 362

Quoted 7 lines · Hans Verkuil

return -EINVAL;

drivers/media/radio/radio-tea5764.c +3 -1
+	}
+	clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL);
  	tea5764_power_up(radio);
-	tea5764_tune(radio, (f->frequency * 125) / 2);
+	tea5764_tune(radio, (freq * 125) / 2);
  	return 0;

Hi Hans,

Quoted 5 lines

Should the part quoted above part perhaps read:

freq = clamp(freq, FREQ_MIN * FREQ_MUL, FREQ_MAX * FREQ_MUL);

Or did "#define clamp() change" recently?

Nope, that's a bug. Thanks for spotting this!

I'll make a patch for this.

Regards,

Hans

Quoted 35 lines

http://lxr.free-electrons.com/source/include/linux/kernel.h

Quoted 16 lines

698 /**

699  * clamp - return a value clamped to a given range with strict typechecking
700  * @val: current value
701  * @min: minimum allowable value
702  * @max: maximum allowable value
703  *
704  * This macro does strict typechecking of min/max to make sure they are of the
705  * same type as val.  See the unnecessary pointer comparisons.
706  */
707 #define clamp(val, min, max) ({                 \
708         typeof(val) __val = (val);              \
709         typeof(min) __min = (min);              \
710         typeof(max) __max = (max);              \
711         (void) (&__val == &__min);              \
712         (void) (&__val == &__max);              \
713         __val = __val < __min ? __min: __val;   \
Quoted 1 line

714 __val > __max ? __max: __val; })

Thank you!

Same spotted in:

Quoted 5 lines
Quoted 5 lines

media_tree/drivers/media/radio/radio-tea5764.c: In function 'vidioc_s_frequency':
media_tree/drivers/media/radio/radio-tea5764.c:359: warning: statement with no effect

media_tree/drivers/media/radio/tef6862.c: In function 'tef6862_s_frequency':
media_tree/drivers/media/radio/tef6862.c:115: warning: statement with no effect

Keep up the good work!

--HPS

#14 lore raw

PATCH 11/21 radio-timb: add device_caps support, remove input/audio ioctls.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

The audio and input ioctls are not applicable for radio devices, remove them.

Also set the device_caps field in v4l2_querycap.

Cc Richard Röjfors <[email protected]>
---
 drivers/media/radio/radio-timb.c |   35 ++---------------------------------
 1 file changed, 2 insertions(+), 33 deletions(-)
drivers/media/radio/radio-timb.c +2 -33
index bb7b143..cecf7d7 100644
@@ -44,7 +44,8 @@ static int timbradio_vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, DRIVER_NAME, sizeof(v->driver));
 	strlcpy(v->card, "Timberdale Radio", sizeof(v->card));
 	snprintf(v->bus_info, sizeof(v->bus_info), "platform:"DRIVER_NAME);
-	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+	v->device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+	v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS;
 	return 0;
 }
 
@@ -62,34 +63,6 @@ static int timbradio_vidioc_s_tuner(struct file *file, void *priv,
 	return v4l2_subdev_call(tr->sd_tuner, tuner, s_tuner, v);
 }
 
-static int timbradio_vidioc_g_input(struct file *filp, void *priv,
-	unsigned int *i)
-{
-	*i = 0;
-	return 0;
-}
-
-static int timbradio_vidioc_s_input(struct file *filp, void *priv,
-	unsigned int i)
-{
-	return i ? -EINVAL : 0;
-}
-
-static int timbradio_vidioc_g_audio(struct file *file, void *priv,
-	struct v4l2_audio *a)
-{
-	a->index = 0;
-	strlcpy(a->name, "Radio", sizeof(a->name));
-	a->capability = V4L2_AUDCAP_STEREO;
-	return 0;
-}
-
-static int timbradio_vidioc_s_audio(struct file *file, void *priv,
-	const struct v4l2_audio *a)
-{
-	return a->index ? -EINVAL : 0;
-}
-
 static int timbradio_vidioc_s_frequency(struct file *file, void *priv,
 	const struct v4l2_frequency *f)
 {
@@ -131,10 +104,6 @@ static const struct v4l2_ioctl_ops timbradio_ioctl_ops = {
 	.vidioc_s_tuner		= timbradio_vidioc_s_tuner,
 	.vidioc_g_frequency	= timbradio_vidioc_g_frequency,
 	.vidioc_s_frequency	= timbradio_vidioc_s_frequency,
-	.vidioc_g_input		= timbradio_vidioc_g_input,
-	.vidioc_s_input		= timbradio_vidioc_s_input,
-	.vidioc_g_audio		= timbradio_vidioc_g_audio,
-	.vidioc_s_audio		= timbradio_vidioc_s_audio,
 	.vidioc_queryctrl	= timbradio_vidioc_queryctrl,
 	.vidioc_g_ctrl		= timbradio_vidioc_g_ctrl,
 	.vidioc_s_ctrl		= timbradio_vidioc_s_ctrl
Signature · 1 line
1.7.10.4
#15 lore raw

PATCH 12/21 radio-timb: convert to the control framework.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

Cc Richard Röjfors <[email protected]>
---
 drivers/media/radio/radio-timb.c |   24 ------------------------
 1 file changed, 24 deletions(-)
drivers/media/radio/radio-timb.c +0 -24
index cecf7d7..99694dd 100644
@@ -77,36 +77,12 @@ static int timbradio_vidioc_g_frequency(struct file *file, void *priv,
 	return v4l2_subdev_call(tr->sd_tuner, tuner, g_frequency, f);
 }
 
-static int timbradio_vidioc_queryctrl(struct file *file, void *priv,
-	struct v4l2_queryctrl *qc)
-{
-	struct timbradio *tr = video_drvdata(file);
-	return v4l2_subdev_call(tr->sd_dsp, core, queryctrl, qc);
-}
-
-static int timbradio_vidioc_g_ctrl(struct file *file, void *priv,
-	struct v4l2_control *ctrl)
-{
-	struct timbradio *tr = video_drvdata(file);
-	return v4l2_subdev_call(tr->sd_dsp, core, g_ctrl, ctrl);
-}
-
-static int timbradio_vidioc_s_ctrl(struct file *file, void *priv,
-	struct v4l2_control *ctrl)
-{
-	struct timbradio *tr = video_drvdata(file);
-	return v4l2_subdev_call(tr->sd_dsp, core, s_ctrl, ctrl);
-}
-
 static const struct v4l2_ioctl_ops timbradio_ioctl_ops = {
 	.vidioc_querycap	= timbradio_vidioc_querycap,
 	.vidioc_g_tuner		= timbradio_vidioc_g_tuner,
 	.vidioc_s_tuner		= timbradio_vidioc_s_tuner,
 	.vidioc_g_frequency	= timbradio_vidioc_g_frequency,
 	.vidioc_s_frequency	= timbradio_vidioc_s_frequency,
-	.vidioc_queryctrl	= timbradio_vidioc_queryctrl,
-	.vidioc_g_ctrl		= timbradio_vidioc_g_ctrl,
-	.vidioc_s_ctrl		= timbradio_vidioc_s_ctrl
 };
 
 static const struct v4l2_file_operations timbradio_fops = {
Signature · 1 line
1.7.10.4
#16 lore raw

PATCH 13/21 radio-timb: actually load the requested subdevs

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

For some reason the tuner and dsp subdevs were never actually loaded. Added the relevant code to do that.

Also remove bogus calls to video_device_release_empty().

Cc Richard Röjfors <[email protected]>
---
 drivers/media/radio/radio-timb.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/media/radio/radio-timb.c +9 -4
index 99694dd..1931ef7 100644
@@ -126,6 +126,15 @@ static int timbradio_probe(struct platform_device *pdev)
 
 	tr->video_dev.v4l2_dev = &tr->v4l2_dev;
 
+	tr->sd_tuner = v4l2_i2c_new_subdev_board(&tr->v4l2_dev,
+		i2c_get_adapter(pdata->i2c_adapter), pdata->tuner, NULL);
+	tr->sd_dsp = v4l2_i2c_new_subdev_board(&tr->v4l2_dev,
+		i2c_get_adapter(pdata->i2c_adapter), pdata->dsp, NULL);
+	if (tr->sd_tuner == NULL || tr->sd_dsp == NULL)
+		goto err_video_req;
+
+	tr->v4l2_dev.ctrl_handler = tr->sd_dsp->ctrl_handler;
+
 	err = video_register_device(&tr->video_dev, VFL_TYPE_RADIO, -1);
 	if (err) {
 		dev_err(&pdev->dev, "Error reg video\n");
@@ -138,7 +147,6 @@ static int timbradio_probe(struct platform_device *pdev)
 	return 0;
 
 err_video_req:
-	video_device_release_empty(&tr->video_dev);
 	v4l2_device_unregister(&tr->v4l2_dev);
 err:
 	dev_err(&pdev->dev, "Failed to register: %d\n", err);
@@ -151,10 +159,7 @@ static int timbradio_remove(struct platform_device *pdev)
 	struct timbradio *tr = platform_get_drvdata(pdev);
 
 	video_unregister_device(&tr->video_dev);
-	video_device_release_empty(&tr->video_dev);
-
 	v4l2_device_unregister(&tr->v4l2_dev);
-
 	return 0;
 }
 
Signature · 1 line
1.7.10.4
#17 lore raw

PATCH 14/21 radio-timb: add control events and prio support.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

Cc Richard Röjfors <[email protected]>
---
 drivers/media/radio/radio-timb.c |    9 +++++++++
 1 file changed, 9 insertions(+)
drivers/media/radio/radio-timb.c +9 -0
index 1931ef7..0817964 100644
@@ -19,6 +19,8 @@
 #include <linux/io.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
@@ -83,10 +85,16 @@ static const struct v4l2_ioctl_ops timbradio_ioctl_ops = {
 	.vidioc_s_tuner		= timbradio_vidioc_s_tuner,
 	.vidioc_g_frequency	= timbradio_vidioc_g_frequency,
 	.vidioc_s_frequency	= timbradio_vidioc_s_frequency,
+	.vidioc_log_status      = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
 };
 
 static const struct v4l2_file_operations timbradio_fops = {
 	.owner		= THIS_MODULE,
+	.open		= v4l2_fh_open,
+	.release	= v4l2_fh_release,
+	.poll		= v4l2_ctrl_poll,
 	.unlocked_ioctl	= video_ioctl2,
 };
 
@@ -118,6 +126,7 @@ static int timbradio_probe(struct platform_device *pdev)
 	tr->video_dev.release = video_device_release_empty;
 	tr->video_dev.minor = -1;
 	tr->video_dev.lock = &tr->lock;
+	set_bit(V4L2_FL_USE_FH_PRIO, &tr->video_dev.flags);
 
 	strlcpy(tr->v4l2_dev.name, DRIVER_NAME, sizeof(tr->v4l2_dev.name));
 	err = v4l2_device_register(NULL, &tr->v4l2_dev);
Signature · 1 line
1.7.10.4
#18 lore raw

PATCH 15/21 tef6862: clamp frequency.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

Clamp the frequency to the valid frequency range as per the V4L2 specification.

Cc Richard Röjfors <[email protected]>
---
 drivers/media/radio/tef6862.c |   10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)
drivers/media/radio/tef6862.c +6 -4
index 82c6c94..de2e6db 100644
@@ -31,8 +31,8 @@
 
 #define FREQ_MUL 16000
 
-#define TEF6862_LO_FREQ (875 * FREQ_MUL / 10)
-#define TEF6862_HI_FREQ (108 * FREQ_MUL)
+#define TEF6862_LO_FREQ (875U * FREQ_MUL / 10)
+#define TEF6862_HI_FREQ (108U * FREQ_MUL)
 
 /* Write mode sub addresses */
 #define WM_SUB_BANDWIDTH	0x0
@@ -105,6 +105,7 @@ static int tef6862_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequen
 {
 	struct tef6862_state *state = to_state(sd);
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	unsigned freq = f->frequency;
 	u16 pll;
 	u8 i2cmsg[3];
 	int err;
@@ -112,7 +113,8 @@ static int tef6862_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequen
 	if (f->tuner != 0)
 		return -EINVAL;
 
-	pll = 1964 + ((f->frequency - TEF6862_LO_FREQ) * 20) / FREQ_MUL;
+	clamp(freq, TEF6862_LO_FREQ, TEF6862_HI_FREQ);
+	pll = 1964 + ((freq - TEF6862_LO_FREQ) * 20) / FREQ_MUL;
 	i2cmsg[0] = (MODE_PRESET << MODE_SHIFT) | WM_SUB_PLLM;
 	i2cmsg[1] = (pll >> 8) & 0xff;
 	i2cmsg[2] = pll & 0xff;
@@ -121,7 +123,7 @@ static int tef6862_s_frequency(struct v4l2_subdev *sd, const struct v4l2_frequen
 	if (err != sizeof(i2cmsg))
 		return err < 0 ? err : -EIO;
 
-	state->freq = f->frequency;
+	state->freq = freq;
 	return 0;
 }
 
Signature · 1 line
1.7.10.4
#19 lore raw

PATCH 16/21 timblogiw: fix querycap.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

Don't set version (the core does that for you), fill in device_caps and prefix bus_info with "platform:".

Cc Richard Röjfors <[email protected]>
---
 drivers/media/platform/timblogiw.c |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)
drivers/media/platform/timblogiw.c +3 -4
index 99861c63..b557caf 100644
@@ -239,13 +239,12 @@ static int timblogiw_querycap(struct file *file, void  *priv,
 	struct video_device *vdev = video_devdata(file);
 
 	dev_dbg(&vdev->dev, "%s: Entry\n",  __func__);
-	memset(cap, 0, sizeof(*cap));
 	strncpy(cap->card, TIMBLOGIWIN_NAME, sizeof(cap->card)-1);
 	strncpy(cap->driver, DRIVER_NAME, sizeof(cap->driver) - 1);
-	strlcpy(cap->bus_info, vdev->name, sizeof(cap->bus_info));
-	cap->version = TIMBLOGIW_VERSION_CODE;
-	cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
+	snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s", vdev->name);
+	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
 		V4L2_CAP_READWRITE;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
 
 	return 0;
 }
Signature · 1 line
1.7.10.4
#20 lore raw

PATCH 17/21 radio-sf16fmi: remove audio/input ioctls.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

The audio and input ioctls do not apply to radio devices. Remove them.

---
 drivers/media/radio/radio-sf16fmi.c |   30 ------------------------------
 1 file changed, 30 deletions(-)
drivers/media/radio/radio-sf16fmi.c +0 -30
index adfcc61..c1d51ec 100644
@@ -218,32 +218,6 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 	return -EINVAL;
 }
 
-static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
-{
-	*i = 0;
-	return 0;
-}
-
-static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
-{
-	return i ? -EINVAL : 0;
-}
-
-static int vidioc_g_audio(struct file *file, void *priv,
-					struct v4l2_audio *a)
-{
-	a->index = 0;
-	strlcpy(a->name, "Radio", sizeof(a->name));
-	a->capability = V4L2_AUDCAP_STEREO;
-	return 0;
-}
-
-static int vidioc_s_audio(struct file *file, void *priv,
-					const struct v4l2_audio *a)
-{
-	return a->index ? -EINVAL : 0;
-}
-
 static const struct v4l2_file_operations fmi_fops = {
 	.owner		= THIS_MODULE,
 	.unlocked_ioctl	= video_ioctl2,
@@ -253,10 +227,6 @@ static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
 	.vidioc_querycap    = vidioc_querycap,
 	.vidioc_g_tuner     = vidioc_g_tuner,
 	.vidioc_s_tuner     = vidioc_s_tuner,
-	.vidioc_g_audio     = vidioc_g_audio,
-	.vidioc_s_audio     = vidioc_s_audio,
-	.vidioc_g_input     = vidioc_g_input,
-	.vidioc_s_input     = vidioc_s_input,
 	.vidioc_g_frequency = vidioc_g_frequency,
 	.vidioc_s_frequency = vidioc_s_frequency,
 	.vidioc_queryctrl   = vidioc_queryctrl,
Signature · 1 line
1.7.10.4
#21 lore raw

PATCH 18/21 radio-sf16fmi: add device_caps support to querycap.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

---
 drivers/media/radio/radio-sf16fmi.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/media/radio/radio-sf16fmi.c +2 -1
index c1d51ec..80beda7 100644
@@ -121,7 +121,8 @@ static int vidioc_querycap(struct file *file, void  *priv,
 	strlcpy(v->driver, "radio-sf16fmi", sizeof(v->driver));
 	strlcpy(v->card, "SF16-FMI/FMP/FMD radio", sizeof(v->card));
 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
-	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+	v->device_caps = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
+	v->capabilities = v->device_caps | V4L2_CAP_DEVICE_CAPS;
 	return 0;
 }
 
Signature · 1 line
1.7.10.4
#22 lore raw

PATCH 19/21 radio-sf16fmi: clamp frequency.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

---
 drivers/media/radio/radio-sf16fmi.c |   11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
drivers/media/radio/radio-sf16fmi.c +5 -6
index 80beda7..9cd0338 100644
@@ -55,8 +55,8 @@ static struct fmi fmi_card;
 static struct pnp_dev *dev;
 bool pnp_attached;
 
-#define RSF16_MINFREQ (87 * 16000)
-#define RSF16_MAXFREQ (108 * 16000)
+#define RSF16_MINFREQ (87U * 16000)
+#define RSF16_MAXFREQ (108U * 16000)
 
 #define FMI_BIT_TUN_CE		(1 << 0)
 #define FMI_BIT_TUN_CLK		(1 << 1)
@@ -155,15 +155,14 @@ static int vidioc_s_frequency(struct file *file, void *priv,
 					const struct v4l2_frequency *f)
 {
 	struct fmi *fmi = video_drvdata(file);
+	unsigned freq = f->frequency;
 
 	if (f->tuner != 0 || f->type != V4L2_TUNER_RADIO)
 		return -EINVAL;
-	if (f->frequency < RSF16_MINFREQ ||
-			f->frequency > RSF16_MAXFREQ)
-		return -EINVAL;
+	clamp(freq, RSF16_MINFREQ, RSF16_MAXFREQ);
 	/* rounding in steps of 800 to match the freq
 	   that will be used */
-	lm7000_set_freq((f->frequency / 800) * 800, fmi, fmi_set_pins);
+	lm7000_set_freq((freq / 800) * 800, fmi, fmi_set_pins);
 	return 0;
 }
 
Signature · 1 line
1.7.10.4
#23 lore raw

PATCH 20/21 radio-sf16fmi: convert to the control framework.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

---
 drivers/media/radio/radio-sf16fmi.c |   56 ++++++++++++++++-------------------
 1 file changed, 25 insertions(+), 31 deletions(-)
drivers/media/radio/radio-sf16fmi.c +25 -31
index 9cd0338..b058f36 100644
@@ -27,6 +27,7 @@
 #include <linux/io.h>		/* outb, outb_p			*/
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
+#include <media/v4l2-ctrls.h>
 #include "lm7000.h"
 
 MODULE_AUTHOR("Petr Vandrovec, [email protected] and M. Kirkwood");
@@ -44,6 +45,7 @@ module_param(radio_nr, int, 0);
 struct fmi
 {
 	struct v4l2_device v4l2_dev;
+	struct v4l2_ctrl_handler hdl;
 	struct video_device vdev;
 	int io;
 	bool mute;
@@ -178,46 +180,26 @@ static int vidioc_g_frequency(struct file *file, void *priv,
 	return 0;
 }
 
-static int vidioc_queryctrl(struct file *file, void *priv,
-					struct v4l2_queryctrl *qc)
+static int fmi_s_ctrl(struct v4l2_ctrl *ctrl)
 {
-	switch (qc->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
-	}
-	return -EINVAL;
-}
-
-static int vidioc_g_ctrl(struct file *file, void *priv,
-					struct v4l2_control *ctrl)
-{
-	struct fmi *fmi = video_drvdata(file);
+	struct fmi *fmi = container_of(ctrl->handler, struct fmi, hdl);
 
 	switch (ctrl->id) {
 	case V4L2_CID_AUDIO_MUTE:
-		ctrl->value = fmi->mute;
-		return 0;
-	}
-	return -EINVAL;
-}
-
-static int vidioc_s_ctrl(struct file *file, void *priv,
-					struct v4l2_control *ctrl)
-{
-	struct fmi *fmi = video_drvdata(file);
-
-	switch (ctrl->id) {
-	case V4L2_CID_AUDIO_MUTE:
-		if (ctrl->value)
+		if (ctrl->val)
 			fmi_mute(fmi);
 		else
 			fmi_unmute(fmi);
-		fmi->mute = ctrl->value;
+		fmi->mute = ctrl->val;
 		return 0;
 	}
 	return -EINVAL;
 }
 
+static const struct v4l2_ctrl_ops fmi_ctrl_ops = {
+	.s_ctrl = fmi_s_ctrl,
+};
+
 static const struct v4l2_file_operations fmi_fops = {
 	.owner		= THIS_MODULE,
 	.unlocked_ioctl	= video_ioctl2,
@@ -229,9 +211,6 @@ static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
 	.vidioc_s_tuner     = vidioc_s_tuner,
 	.vidioc_g_frequency = vidioc_g_frequency,
 	.vidioc_s_frequency = vidioc_s_frequency,
-	.vidioc_queryctrl   = vidioc_queryctrl,
-	.vidioc_g_ctrl      = vidioc_g_ctrl,
-	.vidioc_s_ctrl      = vidioc_s_ctrl,
 };
 
 /* ladis: this is my card. does any other types exist? */
@@ -281,6 +260,7 @@ static int __init fmi_init(void)
 {
 	struct fmi *fmi = &fmi_card;
 	struct v4l2_device *v4l2_dev = &fmi->v4l2_dev;
+	struct v4l2_ctrl_handler *hdl = &fmi->hdl;
 	int res, i;
 	int probe_ports[] = { 0, 0x284, 0x384 };
 
@@ -333,6 +313,18 @@ static int __init fmi_init(void)
 		return res;
 	}
 
+	v4l2_ctrl_handler_init(hdl, 1);
+	v4l2_ctrl_new_std(hdl, &fmi_ctrl_ops,
+			V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+	v4l2_dev->ctrl_handler = hdl;
+	if (hdl->error) {
+		res = hdl->error;
+		v4l2_err(v4l2_dev, "Could not register controls\n");
+		v4l2_ctrl_handler_free(hdl);
+		v4l2_device_unregister(v4l2_dev);
+		return res;
+	}
+
 	strlcpy(fmi->vdev.name, v4l2_dev->name, sizeof(fmi->vdev.name));
 	fmi->vdev.v4l2_dev = v4l2_dev;
 	fmi->vdev.fops = &fmi_fops;
@@ -346,6 +338,7 @@ static int __init fmi_init(void)
 	fmi_mute(fmi);
 
 	if (video_register_device(&fmi->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+		v4l2_ctrl_handler_free(hdl);
 		v4l2_device_unregister(v4l2_dev);
 		release_region(fmi->io, 2);
 		if (pnp_attached)
@@ -361,6 +354,7 @@ static void __exit fmi_exit(void)
 {
 	struct fmi *fmi = &fmi_card;
 
+	v4l2_ctrl_handler_free(&fmi->hdl);
 	video_unregister_device(&fmi->vdev);
 	v4l2_device_unregister(&fmi->v4l2_dev);
 	release_region(fmi->io, 2);
Signature · 1 line
1.7.10.4
#24 lore raw

PATCH 21/21 radio-sf16fmi: add control event and prio support.

In reply to Hans Verkuil

From: Hans Verkuil <[email protected]>

---
 drivers/media/radio/radio-sf16fmi.c |    8 ++++++++
 1 file changed, 8 insertions(+)
drivers/media/radio/radio-sf16fmi.c +8 -0
index b058f36..9e712c8 100644
@@ -28,6 +28,7 @@
 #include <media/v4l2-device.h>
 #include <media/v4l2-ioctl.h>
 #include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
 #include "lm7000.h"
 
 MODULE_AUTHOR("Petr Vandrovec, [email protected] and M. Kirkwood");
@@ -202,6 +203,9 @@ static const struct v4l2_ctrl_ops fmi_ctrl_ops = {
 
 static const struct v4l2_file_operations fmi_fops = {
 	.owner		= THIS_MODULE,
+	.open		= v4l2_fh_open,
+	.release	= v4l2_fh_release,
+	.poll		= v4l2_ctrl_poll,
 	.unlocked_ioctl	= video_ioctl2,
 };
 
@@ -211,6 +215,9 @@ static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
 	.vidioc_s_tuner     = vidioc_s_tuner,
 	.vidioc_g_frequency = vidioc_g_frequency,
 	.vidioc_s_frequency = vidioc_s_frequency,
+	.vidioc_log_status  = v4l2_ctrl_log_status,
+	.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
+	.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
 };
 
 /* ladis: this is my card. does any other types exist? */
@@ -330,6 +337,7 @@ static int __init fmi_init(void)
 	fmi->vdev.fops = &fmi_fops;
 	fmi->vdev.ioctl_ops = &fmi_ioctl_ops;
 	fmi->vdev.release = video_device_release_empty;
+	set_bit(V4L2_FL_USE_FH_PRIO, &fmi->vdev.flags);
 	video_set_drvdata(&fmi->vdev, fmi);
 
 	mutex_init(&fmi->lock);
Signature · 1 line
1.7.10.4