Skip to contentSkip to conversation

ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr

PATCH New Markus Pargmann 3 participants 4 messages May 30, 2013 – May 31, 2013

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ARM: imx6q: Add GPR6 and GPR7 register definitions for iomuxc gpr

From: Philipp Zabel <[email protected]>

Masks for IPU AXI transaction QoS settings

---
 include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +18 -0
index dab34a1..2e1709b 100644
@@ -241,6 +241,24 @@
 
 #define IMX6Q_GPR5_L2_CLK_STOP			BIT(8)
 
+#define IMX6Q_GPR6_IPU1_ID00_WR_QOS_MASK	(0xf << 0)
+#define IMX6Q_GPR6_IPU1_ID01_WR_QOS_MASK	(0xf << 4)
+#define IMX6Q_GPR6_IPU1_ID10_WR_QOS_MASK	(0xf << 8)
+#define IMX6Q_GPR6_IPU1_ID11_WR_QOS_MASK	(0xf << 12)
+#define IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK	(0xf << 16)
+#define IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK	(0xf << 20)
+#define IMX6Q_GPR6_IPU1_ID10_RD_QOS_MASK	(0xf << 24)
+#define IMX6Q_GPR6_IPU1_ID11_RD_QOS_MASK	(0xf << 28)
+
+#define IMX6Q_GPR7_IPU2_ID00_WR_QOS_MASK	(0xf << 0)
+#define IMX6Q_GPR7_IPU2_ID01_WR_QOS_MASK	(0xf << 4)
+#define IMX6Q_GPR7_IPU2_ID10_WR_QOS_MASK	(0xf << 8)
+#define IMX6Q_GPR7_IPU2_ID11_WR_QOS_MASK	(0xf << 12)
+#define IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK	(0xf << 16)
+#define IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK	(0xf << 20)
+#define IMX6Q_GPR7_IPU2_ID10_RD_QOS_MASK	(0xf << 24)
+#define IMX6Q_GPR7_IPU2_ID11_RD_QOS_MASK	(0xf << 28)
+
 #define IMX6Q_GPR9_TZASC2_BYP			BIT(1)
 #define IMX6Q_GPR9_TZASC1_BYP			BIT(0)
 
Signature · 1 line
1.8.2.1
#1 lore raw

PATCH 2/2 ARM: imx6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority

From: Philipp Zabel <[email protected]>

This is needed so that the IPU framebuffer scanout cannot be starved by VPU or GPU activity.
The Freescale SabreLite and SabreSD boards seem to set this in the boot rom already, but the documented register reset values do not contain the necessary settings.

---
 arch/arm/mach-imx/mach-imx6q.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
arch/arm/mach-imx/mach-imx6q.c +32 -0
index 5536fd8..7bef242 100644
@@ -29,6 +29,7 @@
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -161,6 +162,36 @@ static void __init imx6q_usb_init(void)
 	imx_anatop_usb_chrg_detect_disable();
 }
 
+static void __init imx6q_gpr_init(void)
+{
+	struct regmap *gpr;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (IS_ERR(gpr)) {
+		pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
+		return;
+	}
+
+	/* Enable the cacheable attribute of VPU and IPU AXI transactions */
+	regmap_update_bits(gpr, IOMUXC_GPR4, 0,
+			IMX6Q_GPR4_VPU_WR_CACHE_SEL |
+			IMX6Q_GPR4_VPU_RD_CACHE_SEL |
+			IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
+			IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
+			IMX6Q_GPR4_IPU_WR_CACHE_CTL |
+			IMX6Q_GPR4_IPU_RD_CACHE_CTL);
+
+	/* Increase IPU read QoS priority */
+	regmap_update_bits(gpr, IOMUXC_GPR6,
+			IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
+			IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
+			(0xf << 16) | (0x7 << 20));
+	regmap_update_bits(gpr, IOMUXC_GPR7,
+			IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
+			IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
+			(0xf << 16) | (0x7 << 20));
+}
+
 static void __init imx6q_init_machine(void)
 {
 	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
@@ -172,6 +203,7 @@ static void __init imx6q_init_machine(void)
 	imx6q_pm_init();
 	imx6q_usb_init();
 	imx6q_1588_init();
+	imx6q_gpr_init();
 }
 
 #define OCOTP_CFG3			0x440
Signature · 1 line
1.8.2.1
#2 lore raw

PATCH 2/2 ARM: imx6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority

Quoted 6 lines · Markus Pargmann

From: Philipp Zabel <[email protected]>

This is needed so that the IPU framebuffer scanout cannot be starved by VPU or GPU activity.
The Freescale SabreLite and SabreSD boards seem to set this in the boot rom already,

The boot rom is not board specific but SoC, so you meant boot loader?

Quoted 59 lines

but the documented register reset values do not contain the necessary settings.

---
 arch/arm/mach-imx/mach-imx6q.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)
arch/arm/mach-imx/mach-imx6q.c +31 -0
index 5536fd8..7bef242 100644
@@ -29,6 +29,7 @@
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/hardware/cache-l2x0.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -161,6 +162,36 @@ static void __init imx6q_usb_init(void)
 	imx_anatop_usb_chrg_detect_disable();
 }
 
+static void __init imx6q_gpr_init(void)
+{
+	struct regmap *gpr;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (IS_ERR(gpr)) {
+		pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
+		return;
+	}
+
+	/* Enable the cacheable attribute of VPU and IPU AXI transactions */
+	regmap_update_bits(gpr, IOMUXC_GPR4, 0,
+			IMX6Q_GPR4_VPU_WR_CACHE_SEL |
+			IMX6Q_GPR4_VPU_RD_CACHE_SEL |
+			IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
+			IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
+			IMX6Q_GPR4_IPU_WR_CACHE_CTL |
+			IMX6Q_GPR4_IPU_RD_CACHE_CTL);
+
+	/* Increase IPU read QoS priority */
+	regmap_update_bits(gpr, IOMUXC_GPR6,
+			IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
+			IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
+			(0xf << 16) | (0x7 << 20));
+	regmap_update_bits(gpr, IOMUXC_GPR7,
+			IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
+			IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
+			(0xf << 16) | (0x7 << 20));
+}
+
 static void __init imx6q_init_machine(void)
 {
 	if (of_machine_is_compatible("fsl,imx6q-sabrelite"))

arch/arm/mach-imx/mach-imx6q.c static void __init imx6q_init_machine(void) · line 206

Quoted 4 lines
arch/arm/mach-imx/mach-imx6q.c +1 -0
@@ -172,6 +203,7 @@ static void __init imx6q_init_machine(void)
 	imx6q_pm_init();
 	imx6q_usb_init();
 	imx6q_1588_init();
+	imx6q_gpr_init();

The function imx6q_1588_init() is all about setting up some IOMUXC GPR bits, so can you consolidate it into imx6q_gpr_init()?

Shawn

Quoted 6 lines
arch/arm/mach-imx/mach-imx6q.c +0 -0
 }
 
 #define OCOTP_CFG3			0x440
Signature · 1 line
1.8.2.1
#3 lore raw

PATCH 2/2 ARM: imx6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority

In reply to Markus Pargmann
Quoted 38 lines · Markus Pargmann

From: Philipp Zabel <[email protected]>

This is needed so that the IPU framebuffer scanout cannot be starved by VPU or GPU activity.
The Freescale SabreLite and SabreSD boards seem to set this in the boot rom already, but the documented register reset values do not contain the necessary settings.

---
  arch/arm/mach-imx/mach-imx6q.c | 32 ++++++++++++++++++++++++++++++++
  1 file changed, 32 insertions(+)
arch/arm/mach-imx/mach-imx6q.c +9 -0
index 5536fd8..7bef242 100644
@@ -29,6 +29,7 @@
  #include <linux/regmap.h>
  #include <linux/micrel_phy.h>
  #include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
  #include <asm/hardware/cache-l2x0.h>
  #include <asm/mach/arch.h>
  #include <asm/mach/map.h>
@@ -161,6 +162,36 @@ static void __init imx6q_usb_init(void)
  	imx_anatop_usb_chrg_detect_disable();
  }
 
+static void __init imx6q_gpr_init(void)
+{
+	struct regmap *gpr;
+
+	gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
+	if (IS_ERR(gpr)) {
+		pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");
+		return;

arch/arm/mach-imx/mach-imx6q.c static void __init imx6q_usb_init(void) · line 182

Quoted 10 lines
arch/arm/mach-imx/mach-imx6q.c +10 -0
+	}
+
+	/* Enable the cacheable attribute of VPU and IPU AXI transactions */
+	regmap_update_bits(gpr, IOMUXC_GPR4, 0,
+			IMX6Q_GPR4_VPU_WR_CACHE_SEL |
+			IMX6Q_GPR4_VPU_RD_CACHE_SEL |
+			IMX6Q_GPR4_VPU_P_WR_CACHE_VAL |
+			IMX6Q_GPR4_VPU_P_RD_CACHE_VAL_MASK |
+			IMX6Q_GPR4_IPU_WR_CACHE_CTL |
+			IMX6Q_GPR4_IPU_RD_CACHE_CTL);

I have to admit that I don't understand much of this ;) But comparing this with the U-Boot settings

http://git.denx.de/?p=u-boot.git;a=blob;f=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg;h=d0f581582113647b06e5f7ab7f72207746613bc6;hb=refs/heads/master#l170

U-Boot additionally sets GPR4[31-28]:

/* enable AXI cache for VDOA/VPU/IPU */
DATA 4 0x020e0010 0xF00000CF

arch/arm/mach-imx/mach-imx6q.c static void __init imx6q_usb_init(void) · line 192

Quoted 9 lines
arch/arm/mach-imx/mach-imx6q.c +9 -0
+	/* Increase IPU read QoS priority */
+	regmap_update_bits(gpr, IOMUXC_GPR6,
+			IMX6Q_GPR6_IPU1_ID00_RD_QOS_MASK |
+			IMX6Q_GPR6_IPU1_ID01_RD_QOS_MASK,
+			(0xf << 16) | (0x7 << 20));
+	regmap_update_bits(gpr, IOMUXC_GPR7,
+			IMX6Q_GPR7_IPU2_ID00_RD_QOS_MASK |
+			IMX6Q_GPR7_IPU2_ID01_RD_QOS_MASK,
+			(0xf << 16) | (0x7 << 20));

and here U-Boot additionally touches GPR6/7[6-0]:

/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DATA 4 0x020e0018 0x007F007F
DATA 4 0x020e001c 0x007F007F

As mentioned above, I have no idea if/why this is necessary ;)

Best regards

Dirk