mx6slevk: Allow booting a device tree kernel

From: Fabio Estevam <[email protected]>

When the mx6slevk board support was added in U-boot there was no device tree support for mx6sl, so only a FSL 3.0.35 was tested at that time.

Now that mx6slevk support is available we can boot a device tree kernel, by adjusting CONFIG_LOADADDR into a proper location, so that a non-dt and a dt kernels can be booted.

---
 include/configs/mx6slevk.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 8a94efd..19dcdd6 100644
@@ -59,7 +59,7 @@
 
 #define CONFIG_BOOTDELAY		3
 
-#define CONFIG_LOADADDR			0x80800000
+#define CONFIG_LOADADDR			0x82000000
 #define CONFIG_SYS_TEXT_BASE		0x87800000
 
 #define CONFIG_EXTRA_ENV_SETTINGS \

1.8.1.2

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================