Skip to contentSkip to conversation

ARM: multi_v7: Add OMAP with ramdisk config bits

PATCH New Santosh Shilimkar 3 participants 6 messages Jun 12, 2013 – Jun 25, 2013 Arm (32-bit)

lore
Share & tools
lore

Santosh Shilimkar

author
#0 lore raw

PATCH 1/1 ARM: multi_v7: Add OMAP with ramdisk config bits

Add ramdisk fileystem related options which lets OMAP5 and Keystone SOCs to boot till shell with multi_v7_config.

Cc Olof Johansson <[email protected]>
Cc Arnd Bergmann <[email protected]>
Signed-off-by Sricharan R <[email protected]>
Signed-off-by Santosh Shilimkar <[email protected]>

---
The ARCH_SIRF related fix is already in arm-soc as pointed by Olof on IRC. So just sending the defconfig bits only. I didn't sync the multi_v7_config with usual method since it was adding some unnecessary delta to the $subject patch.

 arch/arm/configs/multi_v7_defconfig |    9 +++++++++
 1 file changed, 9 insertions(+)
arch/arm/configs/multi_v7_defconfig +9 -0
index 2e67a27..efd12f4 100644
@@ -1,11 +1,14 @@
 CONFIG_EXPERIMENTAL=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
 CONFIG_ARCH_MVEBU=y
 CONFIG_MACH_ARMADA_370=y
 CONFIG_ARCH_SIRF=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_OMAP2PLUS=y
+CONFIG_SOC_OMAP5=y
 CONFIG_ARCH_SOCFPGA=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_WM8850=y

@@ -25,6 +28,9 @@ CONFIG_ARM_APPENDED_DTB=y
 CONFIG_VFP=y
 CONFIG_NEON=y
 CONFIG_NET=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_SATA_HIGHBANK=y

@@ -38,6 +44,8 @@ CONFIG_SERIO_AMBAKMI=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OMAP=y
+CONFIG_SERIAL_OMAP_CONSOLE=y
 CONFIG_KEYBOARD_SPEAR=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y

@@ -81,3 +89,4 @@ CONFIG_DMADEVICES=y
 CONFIG_PL330_DMA=y
 CONFIG_SIRF_DMA=y
 CONFIG_DW_DMAC=y
+CONFIG_EXT2_FS=y
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH 1/1 ARM: multi_v7: Add OMAP with ramdisk config bits

Quoted 2 lines · Santosh Shilimkar

Add ramdisk fileystem related options which lets OMAP5 and Keystone SOCs to boot till shell with multi_v7_config.

Please add also other v7 omaps.

Regards,

Tony

author
#2 lore raw

PATCH 1/1 ARM: multi_v7: Add OMAP with ramdisk config bits

Quoted 6 lines · Tony Lindgren
Quoted 2 lines · Santosh Shilimkar

Add ramdisk fileystem related options which lets OMAP5 and Keystone SOCs to boot till shell with multi_v7_config.

Please add also other v7 omaps.

Should have done first place. Sorry.
Will update other machines and after testing, repost it.

Regards,
Santosh

#3 lore raw

PATCH 1/1 ARM: multi_v7: Add OMAP with ramdisk config bits

Hi,

Quoted 4 lines · Santosh Shilimkar
Quoted 3 lines · Tony Lindgren
Quoted 2 lines · Santosh Shilimkar

Add ramdisk fileystem related options which lets OMAP5 and Keystone SOCs to boot till shell with multi_v7_config.

Quoted 8 lines
Quoted 2 lines

Please add also other v7 omaps.

Should have done first place. Sorry.
Will update other machines and after testing, repost it.

Regards,
Santosh

Since CONFIG_ARCH_OMAP2PLUS=y is set in the patch, OMAP3, OMAP4 are getting enabled by default.

I tested OMAP4 PANDA on mainline + multi_v7_config + above patch and it booted up fine.

Regards,
Sricharan

#4 lore raw

PATCH 1/1 ARM: multi_v7: Add OMAP with ramdisk config bits

Quoted 11 lines · Sricharan R

Hi,

Quoted 9 lines · Santosh Shilimkar
Quoted 5 lines · Tony Lindgren
Quoted 2 lines · Santosh Shilimkar

Add ramdisk fileystem related options which lets OMAP5 and Keystone SOCs to boot till shell with multi_v7_config.

Please add also other v7 omaps.

Should have done first place. Sorry.
Will update other machines and after testing, repost it.

Quoted 8 lines
Quoted 3 lines

Regards,
Santosh

Since CONFIG_ARCH_OMAP2PLUS=y is set in the patch, OMAP3, OMAP4 are getting enabled by default.

I tested OMAP4 PANDA on mainline + multi_v7_config + above patch and it booted up fine.

Also tested on OMAP3 beagle-xm and beagle-bone black (am335x-bone.dtb) and booted up fine.

Regards,
Sricharan

#5 lore raw

PATCH 1/1 ARM: multi_v7: Add OMAP with ramdisk config bits

In reply to Sricharan R
Quoted 11 lines · Sricharan R

Hi,

Quoted 9 lines · Santosh Shilimkar
Quoted 5 lines · Tony Lindgren
Quoted 2 lines · Santosh Shilimkar

Add ramdisk fileystem related options which lets OMAP5 and Keystone SOCs to boot till shell with multi_v7_config.

Please add also other v7 omaps.

Should have done first place. Sorry.
Will update other machines and after testing, repost it.

Quoted 8 lines
Quoted 3 lines

Regards,
Santosh

Since CONFIG_ARCH_OMAP2PLUS=y is set in the patch, OMAP3, OMAP4 are getting enabled by default.

I tested OMAP4 PANDA on mainline + multi_v7_config + above patch and it booted up fine.

OK thanks for testing. Those default y things will be going away, but we can update both defconfigs after that.

Acked-by Tony Lindgren <[email protected]>