od_set_powersave_bias: NULL pointer dereference
This is from Ubuntu Saucy based on 3.10-rc7:
[ 12.911676] BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 [ 12.911691] IP: [<ffffffff8156e572>] od_set_powersave_bias+0x92/0xc0
For completeness I added the attached debug patch and built a vanilla 3.10-rc7 with the following result:
[ 13.222262] od_set_powersave_bias !policy, cpu 0 [ 13.222843] od_set_powersave_bias !policy, cpu 1 [ 13.223380] od_set_powersave_bias !policy, cpu 2 [ 13.223922] od_set_powersave_bias !policy, cpu 3
Attachments:
dmesg.txt - ubuntu kernel rebased on 3.10-rc7 dmesg_dbg.txt - vanilla 3.10-rc7 with debug patch 0001-cpufreq_ondemand.c-Added-debug.patch - debug patch config - 3.10-rc7 config
rtg
Signature · 1 line
Tim Gardner [email protected]
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-0-generic (rtg@salmon) (gcc version 4.8.1 (Ubuntu 4.8.1-4ubuntu1) ) #6 SMP Mon Jun 24 14:51:20 UTC 2013 (Ubuntu 3.10.0-0.6-generic 3.10.0-rc7) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-0-generic root=UUID=b4858c00-4d39-4102-a162-ee9aee526f10 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba935fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba936000-0x00000000bae86fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bae87000-0x00000000bf7befff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf8befff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf8bf000-0x00000000bfbbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfbbf000-0x00000000bfbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: AMD Larne/Larne, BIOS WLR3206X_Weekly_13_02_0 02/06/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-BFFFF write-back [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00BFBA8000 mask FFFFFFF000 uncachable [ 0.000000] 3 base 00FF800000 mask FFFF800000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000011f000000 aka 4592M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbfc00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe270-0x000fe27f] mapped at [ffff8800000fe270] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fc8000, 0x01fc8fff] PGTABLE [ 0.000000] BRK [0x01fc9000, 0x01fc9fff] PGTABLE [ 0.000000] BRK [0x01fca000, 0x01fcafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11ee00000-0x11effffff] [ 0.000000] [mem 0x11ee00000-0x11effffff] page 2M [ 0.000000] BRK [0x01fcb000, 0x01fcbfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11edfffff] [ 0.000000] [mem 0x11c000000-0x11edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xba935fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xba7fffff] page 2M [ 0.000000] [mem 0xba800000-0xba935fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbae87000-0xbf7befff] [ 0.000000] [mem 0xbae87000-0xbaffffff] page 4k [ 0.000000] [mem 0xbb000000-0xbf5fffff] page 2M [ 0.000000] [mem 0xbf600000-0xbf7befff] page 4k [ 0.000000] BRK [0x01fcc000, 0x01fccfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbfbff000-0xbfbfffff] [ 0.000000] [mem 0xbfbff000-0xbfbfffff] page 4k [ 0.000000] RAMDISK: [mem 0x36188000-0x370bbfff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 AMD) [ 0.000000] ACPI: XSDT 00000000bfbfe280 000C4 (v01 AMD LARNE 00000001 01000013) [ 0.000000] ACPI: FACP 00000000bfbfc000 0010C (v05 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 00000000bfbf1000 06D1D (v01 AMD LARNE F0000000 ACPI 00040000) [ 0.000000] ACPI: FACS 00000000bfb67000 00040 [ 0.000000] ACPI: UEFI 00000000bfbfd000 00236 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET 00000000bfbfb000 00038 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 00000000bfbfa000 00090 (v03 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 00000000bfbf9000 0003C (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! 00000000bfbf8000 000A5 (v32 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: BOOT 00000000bfbf0000 00028 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: WDRT 00000000bfbef000 00047 (v01 AMD LARNE 00000000 ACPI 00040000) [ 0.000000] ACPI: WDAT 00000000bfbee000 001AC (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: FPDT 00000000bfbec000 00044 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbea000 00B10 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbe3000 06377 (v02 AMD LARNE 00000002 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbe2000 00194 (v01 AMD LARNE 00001000 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbe1000 00170 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbe0000 0042D (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbde000 013CA (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbdd000 0008C (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbdc000 00662 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbdb000 00D61 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbd9000 010BF (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11effffff] [ 0.000000] NODE_DATA [mem 0x11eff7000-0x11effbfff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xba935fff] [ 0.000000] node 0: [mem 0xbae87000-0xbf7befff] [ 0.000000] node 0: [mem 0xbfbff000-0xbfbfffff] [ 0.000000] node 0: [mem 0x100000000-0x11effffff] [ 0.000000] On node 0 totalpages: 909837 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12170 pages used for memmap [ 0.000000] DMA32 zone: 778863 pages, LIFO batch:31 [ 0.000000] Normal zone: 1984 pages used for memmap [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000ba936000 - 00000000bae87000 [ 0.000000] PM: Registered nosave memory: 00000000bf7bf000 - 00000000bf8bf000 [ 0.000000] PM: Registered nosave memory: 00000000bf8bf000 - 00000000bfbbf000 [ 0.000000] PM: Registered nosave memory: 00000000bfbbf000 - 00000000bfbff000 [ 0.000000] PM: Registered nosave memory: 00000000bfc00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000 [ 0.000000] PM: Registered nosave memory: 00000000fec02000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000 [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed80000 [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000 [ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011ec00000 s86400 r8192 d24192 u524288 [ 0.000000] pcpu-alloc: s86400 r8192 d24192 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 895598 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-0-generic root=UUID=b4858c00-4d39-4102-a162-ee9aee526f10 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 0 size 32 MB [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000 [ 0.000000] Memory: 3417832k/4702208k available (7051k kernel code, 1062860k absent, 221516k reserved, 6247k data, 1344k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Experimental no-CBs for all CPUs [ 0.000000] Experimental no-CBs CPUs: 0-255. [ 0.000000] NR_IRQS:16640 nr_irqs:1024 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 14680064 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1497.174 MHz processor [ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 2994.34 BogoMIPS (lpj=5988696) [ 0.000011] pid_max: default: 32768 minimum: 301 [ 0.000064] Security Framework initialized [ 0.000095] AppArmor: AppArmor initialized [ 0.000098] Yama: becoming mindful. [ 0.000653] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002808] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.003833] Mount-cache hash table entries: 256 [ 0.004208] Initializing cgroup subsys memory [ 0.004228] Initializing cgroup subsys devices [ 0.004232] Initializing cgroup subsys freezer [ 0.004235] Initializing cgroup subsys blkio [ 0.004239] Initializing cgroup subsys perf_event [ 0.004244] Initializing cgroup subsys hugetlb [ 0.004294] tseg: 00bfc00000 [ 0.004299] CPU: Physical Processor ID: 0 [ 0.004302] CPU: Processor Core ID: 0 [ 0.004306] mce: CPU supports 6 MCE banks [ 0.004318] LVT offset 1 assigned for vector 0xf9 [ 0.004327] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.004327] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128 [ 0.004327] tlb_flushall_shift: 5 [ 0.004506] Freeing SMP alternatives: 24k freed [ 0.008437] ACPI: Core revision 20130328 [ 0.030326] ACPI: All ACPI Tables successfully acquired [ 0.034255] ftrace: allocating 27479 entries in 108 pages [ 0.055120] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.094828] smpboot: CPU0: AMD A4-5000 APU with Radeon(TM) HD Graphics (fam: 16, model: 00, stepping: 01) [ 0.199034] Performance Events: AMD PMU driver. [ 0.199043] ... version: 0 [ 0.199046] ... bit width: 48 [ 0.199048] ... generic registers: 4 [ 0.199051] ... value mask: 0000ffffffffffff [ 0.199053] ... max period: 00007fffffffffff [ 0.199055] ... fixed-purpose events: 0 [ 0.199058] ... event mask: 000000000000000f [ 0.202048] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.202235] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.242088] Brought up 4 CPUs [ 0.242097] smpboot: Total of 4 processors activated (11977.39 BogoMIPS) [ 0.243458] devtmpfs: initialized [ 0.247000] EVM: security.selinux [ 0.247004] EVM: security.SMACK64 [ 0.247007] EVM: security.capability [ 0.247153] PM: Registering ACPI NVS region [mem 0xbf8bf000-0xbfbbefff] (3145728 bytes) [ 0.249349] regulator-dummy: no parameters [ 0.249447] NET: Registered protocol family 16 [ 0.249779] ACPI: bus type PCI registered [ 0.249784] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.249906] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.249912] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.255667] PCI: Using configuration type 1 for base access [ 0.257696] bio: create slab <bio-0> at 0 [ 0.258027] ACPI: Added _OSI(Module Device) [ 0.258032] ACPI: Added _OSI(Processor Device) [ 0.258035] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.258039] ACPI: Added _OSI(Processor Aggregator Device) [ 0.261304] ACPI: EC: Look up EC in DSDT [ 0.264710] ACPI: Executed 1 blocks of module-level executable AML code [ 0.273379] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.338485] ACPI: Interpreter enabled [ 0.338508] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.338518] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.338549] ACPI: (supports S0 S3 S4 S5) [ 0.338553] ACPI: Using IOAPIC for interrupt routing [ 0.338869] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.339610] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.339650] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.340665] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.340690] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.428409] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.428893] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff]) [ 0.428903] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.429111] PCI host bridge to bus 0000:00 [ 0.429118] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.429123] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.429127] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.429132] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.429136] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.429140] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.429144] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.429148] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.429152] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.429156] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.429160] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.429164] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.429168] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.429171] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.429175] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.429179] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff] [ 0.429183] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff] [ 0.429187] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff] [ 0.429203] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000 [ 0.429373] pci 0000:00:01.0: [1002:9832] type 00 class 0x030000 [ 0.429393] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.429407] pci 0000:00:01.0: reg 18: [mem 0xf0000000-0xf07fffff 64bit pref] [ 0.429418] pci 0000:00:01.0: reg 20: [io 0x3000-0x30ff] [ 0.429429] pci 0000:00:01.0: reg 24: [mem 0xf0a00000-0xf0a3ffff] [ 0.429439] pci 0000:00:01.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.429486] pci 0000:00:01.0: supports D1 D2 [ 0.429491] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.429580] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 [ 0.429599] pci 0000:00:01.1: reg 10: [mem 0xf0a40000-0xf0a43fff 64bit] [ 0.429675] pci 0000:00:01.1: supports D1 D2 [ 0.429797] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000 [ 0.429942] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400 [ 0.430030] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold [ 0.430086] pci 0000:00:02.3: System wakeup disabled by ACPI [ 0.430149] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400 [ 0.430235] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold [ 0.430360] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330 [ 0.430383] pci 0000:00:10.0: reg 10: [mem 0xf0a48000-0xf0a49fff 64bit] [ 0.430487] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.430566] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.430634] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601 [ 0.430656] pci 0000:00:11.0: reg 10: [io 0x3118-0x311f] [ 0.430667] pci 0000:00:11.0: reg 14: [io 0x3124-0x3127] [ 0.430678] pci 0000:00:11.0: reg 18: [io 0x3110-0x3117] [ 0.430690] pci 0000:00:11.0: reg 1c: [io 0x3120-0x3123] [ 0.430701] pci 0000:00:11.0: reg 20: [io 0x3100-0x310f] [ 0.430712] pci 0000:00:11.0: reg 24: [mem 0xf0a4f000-0xf0a4f3ff] [ 0.430758] pci 0000:00:11.0: PME# supported from D3hot [ 0.430882] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.430899] pci 0000:00:12.0: reg 10: [mem 0xf0a4e000-0xf0a4efff] [ 0.430999] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.431060] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.431549] pci 0000:00:12.2: reg 10: [mem 0xf0a4d000-0xf0a4d0ff] [ 0.434194] pci 0000:00:12.2: supports D1 D2 [ 0.434199] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.434265] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.434327] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 0.434343] pci 0000:00:13.0: reg 10: [mem 0xf0a4c000-0xf0a4cfff] [ 0.434446] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.434507] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 [ 0.434960] pci 0000:00:13.2: reg 10: [mem 0xf0a4b000-0xf0a4b0ff] [ 0.437600] pci 0000:00:13.2: supports D1 D2 [ 0.437604] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.437669] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.437732] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.437901] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.437924] pci 0000:00:14.2: reg 10: [mem 0xf0a44000-0xf0a47fff 64bit] [ 0.437991] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.438097] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.438272] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501 [ 0.438293] pci 0000:00:14.7: reg 10: [mem 0xf0a4a000-0xf0a4a0ff 64bit] [ 0.438449] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000 [ 0.438576] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000 [ 0.438700] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000 [ 0.438826] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000 [ 0.438961] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000 [ 0.439081] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000 [ 0.439340] pci 0000:01:00.0: [1969:1091] type 00 class 0x020000 [ 0.439387] pci 0000:01:00.0: reg 10: [mem 0xf0900000-0xf093ffff 64bit] [ 0.439407] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f] [ 0.439532] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.450158] pci 0000:00:02.3: PCI bridge to [bus 01] [ 0.450169] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff] [ 0.450176] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff] [ 0.450350] pci 0000:02:00.0: [14e4:4359] type 00 class 0x028000 [ 0.450383] pci 0000:02:00.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit] [ 0.450517] pci 0000:02:00.0: supports D1 D2 [ 0.450521] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.458277] pci 0000:00:02.5: PCI bridge to [bus 02] [ 0.458296] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff] [ 0.458527] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.458818] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted [ 0.476032] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.476154] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.476285] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.476413] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.476522] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.476619] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.476715] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.476811] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.479235] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.479253] acpi root: \_SB_.PCI0 notify handler is installed [ 0.479378] Found 1 acpi root devices [ 0.479441] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.495228] ACPI: No dock devices found. [ 0.495573] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.495585] vgaarb: loaded [ 0.495588] vgaarb: bridge control possible 0000:00:01.0 [ 0.495940] SCSI subsystem initialized [ 0.495945] ACPI: bus type ATA registered [ 0.496032] libata version 3.00 loaded. [ 0.496063] ACPI: bus type USB registered [ 0.496099] usbcore: registered new interface driver usbfs [ 0.496119] usbcore: registered new interface driver hub [ 0.496192] usbcore: registered new device driver usb [ 0.496424] PCI: Using ACPI for IRQ routing [ 0.498292] PCI: pci_cache_line_size set to 64 bytes [ 0.498424] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.498429] e820: reserve RAM buffer [mem 0xba936000-0xbbffffff] [ 0.498432] e820: reserve RAM buffer [mem 0xbf7bf000-0xbfffffff] [ 0.498435] e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff] [ 0.498439] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] [ 0.498595] NetLabel: Initializing [ 0.498598] NetLabel: domain hash size = 128 [ 0.498600] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.498624] NetLabel: unlabeled traffic allowed by default [ 0.498739] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.498747] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.500790] Switching to clocksource hpet [ 0.510451] AppArmor: AppArmor Filesystem Enabled [ 0.510502] pnp: PnP ACPI init [ 0.510527] ACPI: bus type PNP registered [ 0.510792] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved [ 0.510798] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.510807] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.511051] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.511114] pnp 00:02: [dma 4] [ 0.511148] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.511205] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.511303] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.511354] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.511411] pnp 00:06: Plug and Play ACPI device, IDs FUJ7401 PNP0303 (active) [ 0.511468] pnp 00:07: Plug and Play ACPI device, IDs CIR0311 PNP0f13 (active) [ 0.511553] system 00:08: [io 0x0400-0x04cf] has been reserved [ 0.511559] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.511564] system 00:08: [io 0x04d6] has been reserved [ 0.511568] system 00:08: [io 0x0680-0x06ff] has been reserved [ 0.511572] system 00:08: [io 0x077a] has been reserved [ 0.511577] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 0.511581] system 00:08: [io 0x0c14] has been reserved [ 0.511585] system 00:08: [io 0x0c50-0x0c52] has been reserved [ 0.511589] system 00:08: [io 0x0c6c] has been reserved [ 0.511593] system 00:08: [io 0x0c6f] has been reserved [ 0.511598] system 00:08: [io 0x0cd0-0x0cdb] has been reserved [ 0.511606] system 00:08: [io 0x0840-0x0847] has been reserved [ 0.511613] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.511746] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.511752] system 00:09: [mem 0xff800000-0xffffffff] has been reserved [ 0.511758] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.512256] ACPI: IRQ 5 override to edge, high [ 0.512309] pnp 00:0a: Plug and Play ACPI device, IDs AMDc003 (active) [ 0.539553] pnp: PnP ACPI: found 11 devices [ 0.539561] ACPI: bus type PNP unregistered [ 0.548006] pci 0000:00:01.0: address space collision: [mem 0xfffe0000-0xffffffff pref] conflicts with reserved [mem 0xff800000-0xffffffff] [ 0.548065] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0a60000-0xf0a7ffff pref] [ 0.548073] pci 0000:00:02.3: PCI bridge to [bus 01] [ 0.548079] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff] [ 0.548087] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff] [ 0.548097] pci 0000:00:02.5: PCI bridge to [bus 02] [ 0.548105] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff] [ 0.548363] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.548368] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.548372] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.548377] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.548380] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.548384] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.548388] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.548392] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.548396] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.548400] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.548404] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.548408] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.548411] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.548415] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.548419] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff] [ 0.548423] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff] [ 0.548427] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff] [ 0.548431] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.548435] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff] [ 0.548439] pci_bus 0000:02: resource 1 [mem 0xf0800000-0xf08fffff] [ 0.548500] NET: Registered protocol family 2 [ 0.548858] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.549101] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.549258] TCP: Hash tables configured (established 32768 bind 32768) [ 0.549307] TCP: reno registered [ 0.549324] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.549360] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.549504] NET: Registered protocol family 1 [ 0.549530] pci 0000:00:01.0: Boot video device [ 1.185260] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag [ 1.185326] PCI: CLS 64 bytes, default 64 [ 1.185435] Trying to unpack rootfs image as initramfs... [ 1.696360] Freeing initrd memory: 15568k freed [ 1.702321] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.702335] software IO TLB [mem 0xbb7bf000-0xbf7bf000] (64MB) mapped at [ffff8800bb7bf000-ffff8800bf7befff] [ 1.702437] Simple Boot Flag at 0x44 set to 0x1 [ 1.702713] perf: AMD NB counters detected [ 1.702728] perf: AMD L2I counters detected [ 1.702776] LVT offset 0 assigned for vector 0x400 [ 1.702832] perf: AMD IBS detected (0x000000ff) [ 1.702886] Scanning for low memory corruption every 60 seconds [ 1.703303] Initialise module verification [ 1.703395] audit: initializing netlink socket (disabled) [ 1.703415] type=2000 audit(1372089495.592:1): initialized [ 1.756052] bounce pool size: 64 pages [ 1.756071] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.758839] VFS: Disk quotas dquot_6.5.2 [ 1.758925] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.759946] fuse init (API version 7.22) [ 1.760091] msgmni has been set to 6705 [ 1.761030] Key type asymmetric registered [ 1.761034] Asymmetric key parser 'x509' registered [ 1.761097] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.761170] io scheduler noop registered [ 1.761174] io scheduler deadline registered (default) [ 1.761225] io scheduler cfq registered [ 1.761433] pcieport 0000:00:02.3: irq 72 for MSI/MSI-X [ 1.761536] pcieport 0000:00:02.5: irq 73 for MSI/MSI-X [ 1.761659] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt [ 1.761664] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.761671] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded [ 1.761703] pcieport 0000:00:02.5: Signaling PME through PCIe PME interrupt [ 1.761707] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.761714] pcie_pme 0000:00:02.5:pcie01: service driver pcie_pme loaded [ 1.761737] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.761765] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.795217] ACPI: AC Adapter [ACAD] (on-line) [ 1.795435] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.795444] ACPI: Power Button [PWRB] [ 1.795535] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 1.795580] ACPI: Lid Switch [LID] [ 1.795645] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 1.795651] ACPI: Power Button [PWRF] [ 1.795793] ACPI: acpi_idle registered with cpuidle [ 1.869280] GHES: HEST is not enabled! [ 1.869524] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 1.872289] ACPI: Battery Slot [BATT] (battery absent) [ 1.872320] Linux agpgart interface v0.103 [ 1.874818] brd: module loaded [ 1.876258] loop: module loaded [ 1.876935] libphy: Fixed MDIO Bus: probed [ 1.877105] tun: Universal TUN/TAP device driver, 1.6 [ 1.877109] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 1.877190] PPP generic driver version 2.4.2 [ 1.877267] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.877270] ehci-pci: EHCI PCI platform driver [ 1.877460] ehci-pci 0000:00:12.2: EHCI Host Controller [ 1.877474] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 1.877487] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.877500] ehci-pci 0000:00:12.2: debug port 1 [ 1.877568] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0a4d000 [ 1.889116] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.889188] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.889193] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.889198] usb usb1: Product: EHCI Host Controller [ 1.889202] usb usb1: Manufacturer: Linux 3.10.0-0-generic ehci_hcd [ 1.889205] usb usb1: SerialNumber: 0000:00:12.2 [ 1.889451] hub 1-0:1.0: USB hub found [ 1.889461] hub 1-0:1.0: 4 ports detected [ 1.889794] ehci-pci 0000:00:13.2: EHCI Host Controller [ 1.889806] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 1.889814] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.889827] ehci-pci 0000:00:13.2: debug port 1 [ 1.889866] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0a4b000 [ 1.901121] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.901178] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.901184] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.901188] usb usb2: Product: EHCI Host Controller [ 1.901192] usb usb2: Manufacturer: Linux 3.10.0-0-generic ehci_hcd [ 1.901196] usb usb2: SerialNumber: 0000:00:13.2 [ 1.901442] hub 2-0:1.0: USB hub found [ 1.901451] hub 2-0:1.0: 4 ports detected [ 1.901622] ehci-platform: EHCI generic platform driver [ 1.901643] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.901849] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.901861] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 1.901905] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0a4e000 [ 1.961150] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.961159] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.961164] usb usb3: Product: OHCI Host Controller [ 1.961168] usb usb3: Manufacturer: Linux 3.10.0-0-generic ohci_hcd [ 1.961171] usb usb3: SerialNumber: 0000:00:12.0 [ 1.961446] hub 3-0:1.0: USB hub found [ 1.961457] hub 3-0:1.0: 4 ports detected [ 1.961790] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.961805] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 1.961838] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0a4c000 [ 2.021139] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.021148] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.021152] usb usb4: Product: OHCI Host Controller [ 2.021156] usb usb4: Manufacturer: Linux 3.10.0-0-generic ohci_hcd [ 2.021160] usb usb4: SerialNumber: 0000:00:13.0 [ 2.021487] hub 4-0:1.0: USB hub found [ 2.021498] hub 4-0:1.0: 4 ports detected [ 2.021706] uhci_hcd: USB Universal Host Controller Interface driver [ 2.021931] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.021943] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 2.022183] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X [ 2.022198] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X [ 2.022212] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X [ 2.022225] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X [ 2.022238] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X [ 2.022377] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.022382] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.022386] usb usb5: Product: xHCI Host Controller [ 2.022390] usb usb5: Manufacturer: Linux 3.10.0-0-generic xhci_hcd [ 2.022394] usb usb5: SerialNumber: 0000:00:10.0 [ 2.022542] xHCI xhci_add_endpoint called for root hub [ 2.022546] xHCI xhci_check_bandwidth called for root hub [ 2.022584] hub 5-0:1.0: USB hub found [ 2.022593] hub 5-0:1.0: 2 ports detected [ 2.022683] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.022690] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 [ 2.025537] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.025542] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.025545] usb usb6: Product: xHCI Host Controller [ 2.025549] usb usb6: Manufacturer: Linux 3.10.0-0-generic xhci_hcd [ 2.025552] usb usb6: SerialNumber: 0000:00:10.0 [ 2.025685] xHCI xhci_add_endpoint called for root hub [ 2.025688] xHCI xhci_check_bandwidth called for root hub [ 2.025722] hub 6-0:1.0: USB hub found [ 2.025731] hub 6-0:1.0: 2 ports detected [ 2.045359] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.051626] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.051640] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.051911] mousedev: PS/2 mouse device common for all mice [ 2.052193] rtc_cmos 00:04: RTC can wake from S4 [ 2.052340] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.052369] rtc_cmos 00:04: alarms up to one month, 114 bytes nvram, hpet irqs [ 2.052498] device-mapper: uevent: version 1.0.3 [ 2.052612] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected] [ 2.052714] cpuidle: using governor ladder [ 2.052855] cpuidle: using governor menu [ 2.052875] ledtrig-cpu: registered to indicate activity on CPUs [ 2.053168] ashmem: initialized [ 2.053439] TCP: cubic registered [ 2.053622] NET: Registered protocol family 10 [ 2.053978] NET: Registered protocol family 17 [ 2.053996] Key type dns_resolver registered [ 2.054488] Loading module verification certificates [ 2.056631] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 2d32f54cca24e68d89c061e996cd7d65402b258e' [ 2.056653] registered taskstats version 1 [ 2.059624] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.061295] Key type trusted registered [ 2.065250] Key type encrypted registered [ 2.069774] rtc_cmos 00:04: setting system clock to 2013-06-24 15:58:16 UTC (1372089496) [ 2.069996] acpi-cpufreq: overriding BIOS provided _PSD data [ 2.070294] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.070298] EDD information not available. [ 2.072403] Freeing unused kernel memory: 1344k freed [ 2.072852] Write protecting the kernel read-only data: 12288k [ 2.078689] Freeing unused kernel memory: 1128k freed [ 2.083771] Freeing unused kernel memory: 988k freed [ 2.115664] udevd[115]: starting version 175 [ 2.261311] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [00:00:1a:1b:38:36] [ 2.261864] ahci 0000:00:11.0: version 3.0 [ 2.262151] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.262160] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part [ 2.265579] scsi0 : ahci [ 2.265766] scsi1 : ahci [ 2.265845] ata1: SATA max UDMA/133 abar m1024@0xf0a4f000 port 0xf0a4f100 irq 19 [ 2.265851] ata2: SATA max UDMA/133 abar m1024@0xf0a4f000 port 0xf0a4f180 irq 19 [ 2.269289] sdhci: Secure Digital Host Controller Interface driver [ 2.269296] sdhci: Copyright(c) Pierre Ossman [ 2.272416] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1) [ 2.272648] mmc0: no vqmmc regulator found [ 2.272653] mmc0: no vmmc regulator found [ 2.272797] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA [ 2.385184] usb 5-1: new full-speed USB device number 2 using xhci_hcd [ 2.433624] usb 5-1: New USB device found, idVendor=413c, idProduct=1004 [ 2.433633] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.433637] usb 5-1: Product: Dell USB Keyboard Hub [ 2.433641] usb 5-1: Manufacturer: Dell [ 2.433913] usb 5-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes [ 2.451685] hub 5-1:1.0: USB hub found [ 2.455615] hub 5-1:1.0: 3 ports detected [ 2.601182] usb 3-2: new low-speed USB device number 2 using ohci_hcd [ 2.701178] tsc: Refined TSC clocksource calibration: 1497.191 MHz [ 2.701195] Switching to clocksource tsc [ 2.757199] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.757234] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.766234] usb 3-2: New USB device found, idVendor=0461, idProduct=4d15 [ 2.766243] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 2.766248] usb 3-2: Product: USB Optical Mouse [ 2.777188] hidraw: raw HID events driver (C) Jiri Kosina [ 2.782331] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133 [ 2.782337] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.783996] ata2.00: ATAPI: HL-DT-ST BDDVDRW CT40N, 1.00, max UDMA/133 [ 2.784814] ata1.00: configured for UDMA/133 [ 2.785095] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0001 PQ: 0 ANSI: 5 [ 2.785310] usbcore: registered new interface driver usbhid [ 2.785314] usbhid: USB HID core driver [ 2.785890] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.785949] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.786045] sd 0:0:0:0: [sda] Write Protect is off [ 2.786051] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.786136] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.787809] ata2.00: configured for UDMA/133 [ 2.791955] input: USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4 [ 2.792175] hid-generic 0003:0461:4D15.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:12.0-2/input0 [ 2.792694] scsi 1:0:0:0: CD-ROM HL-DT-ST BDDVDRW CT40N 1.00 PQ: 0 ANSI: 5 [ 2.797085] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.797092] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.797341] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.797479] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.843763] usb 5-1.1: new low-speed USB device number 3 using xhci_hcd [ 2.846857] sda: sda1 sda2 < sda5 > [ 2.847738] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.897695] usb 5-1.1: New USB device found, idVendor=413c, idProduct=2006 [ 2.897704] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.897709] usb 5-1.1: Product: Dell USB Keyboard Hub [ 2.897713] usb 5-1.1: Manufacturer: Dell [ 2.897997] usb 5-1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 2.898006] usb 5-1.1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes [ 2.927212] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input5 [ 2.927442] hid-generic 0003:413C:2006.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:10.0-1.1/input0 [ 2.968857] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input6 [ 2.969137] hid-generic 0003:413C:2006.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:10.0-1.1/input1 [ 4.066398] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 5.695351] init: ureadahead main process (288) terminated with status 5 [ 7.102237] Adding 3637244k swap on /dev/sda5. Priority:-1 extents:1 across:3637244k FS [ 8.396119] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 8.625618] udevd[363]: starting version 175 [ 9.692544] lp: driver loaded but no devices found [ 10.170438] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 10.582236] bcma: bus0: Found chip with id 0xA8DC, rev 0x00 and package 0x08 [ 10.582265] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 10.582286] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0) [ 10.582325] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0) [ 10.582345] bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0) [ 10.591622] MCE: In-kernel MCE decoding enabled. [ 10.595182] bcma: bus0: Bus registered [ 10.615808] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 10.638695] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20130328/utaddress-251) [ 10.638709] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 10.658107] acpi device:01: registered as cooling_device4 [ 10.658152] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 10.658236] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 10.862546] microcode: CPU0: patch_level=0x07000106 [ 11.102085] EDAC MC: Ver: 3.0.0 [ 11.286885] AMD64 EDAC driver v3.4.0 [ 11.286944] EDAC amd64: DRAM ECC disabled. [ 11.286957] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 11.286957] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 11.286957] (Note that use of the override may cause unknown side effects.) [ 11.307583] microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin [ 11.307613] microcode: CPU1: patch_level=0x07000106 [ 11.307631] microcode: CPU2: patch_level=0x07000106 [ 11.307645] microcode: CPU3: patch_level=0x07000106 [ 11.307749] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba [ 11.430066] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 11.500247] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8 [ 12.709807] hda-intel 0000:00:01.1: Using LPIB position fix [ 12.709867] snd_hda_intel 0000:00:01.1: irq 79 for MSI/MSI-X [ 12.712498] hda-intel 0000:00:01.1: Enable sync_write for stable communication [ 12.762474] kvm: Nested Virtualization enabled [ 12.762485] kvm: Nested Paging enabled [ 12.911676] BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 [ 12.911691] IP: [<ffffffff8156e572>] od_set_powersave_bias+0x92/0xc0 [ 12.911705] PGD 118199067 PUD 118198067 PMD 0 [ 12.911713] Oops: 0000 [#1] SMP [ 12.911719] Modules linked in: amd_freq_sensitivity(+) kvm_amd kvm snd_hda_intel(+) snd_hda_codec crc32_pclmul ghash_clmulni_intel snd_hwdep snd_pcm aesni_intel ablk_helper snd_seq_midi cryptd lrw snd_rawmidi snd_seq_midi_event gf128mul snd_seq glue_helper aes_x86_64 snd_timer snd_seq_device psmouse edac_core snd joydev microcode i2c_piix4 soundcore snd_page_alloc video edac_mce_amd bcma mac_hid fam15h_power serio_raw lp parport hid_generic usbhid hid sdhci_pci sdhci ahci libahci alx mdio [ 12.911782] CPU: 0 PID: 605 Comm: modprobe Not tainted 3.10.0-0-generic #6 [ 12.911789] Hardware name: AMD Larne/Larne, BIOS WLR3206X_Weekly_13_02_0 02/06/2013 [ 12.911795] task: ffff880115cd2ee0 ti: ffff880118140000 task.ti: ffff880118140000 [ 12.911800] RIP: 0010:[<ffffffff8156e572>] [<ffffffff8156e572>] od_set_powersave_bias+0x92/0xc0 [ 12.911809] RSP: 0018:ffff880118141d00 EFLAGS: 00010246 [ 12.911814] RAX: ffff88011ec00000 RBX: 0000000000000000 RCX: 0000000000000100 [ 12.911819] RDX: 0000000000000000 RSI: ffff880118141d00 RDI: ffff880118141d00 [ 12.911824] RBP: ffff880118141d40 R08: ffffffff81cf2ee0 R09: 0000000000000004 [ 12.911829] R10: ffff88011ec14fc8 R11: 0000000000014480 R12: ffffffff81cf2ee0 [ 12.911835] R13: 0000000000010c80 R14: 0000000000000190 R15: ffff880118141ef0 [ 12.911842] FS: 00007f0688e8d700(0000) GS:ffff88011ec00000(0000) knlGS:0000000000000000 [ 12.911849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 12.911854] CR2: 0000000000000070 CR3: 0000000115cc4000 CR4: 00000000000407f0 [ 12.911860] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 12.911866] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 12.911871] Stack: [ 12.911875] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 12.911885] 0000000000000000 0000000000000000 ffffffffa0280000 ffffffffa0280018 [ 12.911894] ffff880118141d50 ffffffff8156e5b7 ffff880118141d70 ffffffffa001e046 [ 12.911904] Call Trace: [ 12.911914] [<ffffffff8156e5b7>] od_register_powersave_bias_handler+0x17/0x20 [ 12.911925] [<ffffffffa001e046>] amd_freq_sensitivity_init+0x46/0x1000 [amd_freq_sensitivity] [ 12.911935] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 12.911945] [<ffffffff81002102>] do_one_initcall+0x102/0x160 [ 12.911955] [<ffffffff810bee8c>] load_module+0x101c/0x1400 [ 12.911964] [<ffffffff810baa40>] ? store_uevent+0x40/0x40 [ 12.911973] [<ffffffff810bf31d>] SyS_init_module+0xad/0xd0 [ 12.911983] [<ffffffff816defef>] tracesys+0xe1/0xe6 [ 12.911988] Code: 78 00 89 c3 76 3b 0f a3 45 c0 19 d2 85 d2 75 d9 89 c0 48 8d 75 c0 b9 00 01 00 00 48 8b 04 c5 80 21 cf 81 48 89 f7 49 8b 54 05 20 <48> 8b 42 70 48 8b 40 10 44 89 70 14 e8 bd d5 dd ff eb ab 0f 1f [ 12.912054] RIP [<ffffffff8156e572>] od_set_powersave_bias+0x92/0xc0 [ 12.912062] RSP <ffff880118141d00> [ 12.912066] CR2: 0000000000000070 [ 12.912073] ---[ end trace 98b1cd8b10d00b40 ]--- [ 13.025093] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9 [ 13.025267] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10 [ 13.025892] hda-intel 0000:00:14.2: Using LPIB position fix [ 13.030414] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 13.055253] hda_codec: CX20751/2: BIOS auto-probing. [ 13.055499] autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 13.055506] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.055512] hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 13.055516] mono: mono_out=0x0 [ 13.055520] inputs: [ 13.055525] Internal Mic=0x1a [ 13.055530] Mic=0x18 [ 13.058972] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 [ 13.059140] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 [ 13.944912] type=1400 audit(1372089508.368:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=760 comm="apparmor_parser" [ 13.945041] type=1400 audit(1372089508.368:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=760 comm="apparmor_parser" [ 13.945142] type=1400 audit(1372089508.368:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=760 comm="apparmor_parser" [ 13.945628] type=1400 audit(1372089508.368:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=684 comm="apparmor_parser" [ 13.945745] type=1400 audit(1372089508.368:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=684 comm="apparmor_parser" [ 13.945849] type=1400 audit(1372089508.368:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=684 comm="apparmor_parser" [ 14.737492] init: failsafe main process (848) killed by TERM signal [ 14.979196] ppdev: user-space parallel port driver [ 15.906260] Bluetooth: Core ver 2.16 [ 15.906305] NET: Registered protocol family 31 [ 15.906309] Bluetooth: HCI device and connection manager initialized [ 15.906325] Bluetooth: HCI socket layer initialized [ 15.906331] Bluetooth: L2CAP socket layer initialized [ 15.906341] Bluetooth: SCO socket layer initialized [ 16.190667] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.190675] Bluetooth: BNEP filters: protocol multicast [ 16.190694] Bluetooth: BNEP socket layer initialized [ 16.241842] Bluetooth: RFCOMM TTY layer initialized [ 16.241865] Bluetooth: RFCOMM socket layer initialized [ 16.241869] Bluetooth: RFCOMM ver 1.11 [ 16.355882] type=1400 audit(1372089510.780:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=932 comm="apparmor_parser" [ 16.356609] type=1400 audit(1372089510.780:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=932 comm="apparmor_parser" [ 16.641660] type=1400 audit(1372089511.064:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=990 comm="apparmor_parser" [ 16.948707] type=1400 audit(1372089511.372:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=991 comm="apparmor_parser" [ 17.891176] alx 0000:01:00.0: irq 80 for MSI/MSI-X [ 17.891483] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 17.892511] alx 0000:01:00.0 eth1: NIC Up: 1 Gbps Full [ 17.893447] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 31.819496] audit_printk_skb: 21 callbacks suppressed [ 31.819504] type=1400 audit(1372089526.246:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=992 comm="apparmor_parser" [ 31.821369] type=1400 audit(1372089526.246:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=992 comm="apparmor_parser" [ 31.822241] type=1400 audit(1372089526.250:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=992 comm="apparmor_parser" [ 31.823734] type=1400 audit(1372089526.250:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=992 comm="apparmor_parser" [ 31.825106] type=1400 audit(1372089526.250:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=992 comm="apparmor_parser" [ 31.825965] type=1400 audit(1372089526.254:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=992 comm="apparmor_parser" [ 31.827103] type=1400 audit(1372089526.254:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=992 comm="apparmor_parser" [ 31.828159] type=1400 audit(1372089526.254:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=992 comm="apparmor_parser" [ 32.294807] init: alsa-restore main process (1128) terminated with status 99 [ 71.477255] vesafb: mode is 1600x1200x32, linelength=6400, pages=0 [ 71.477262] vesafb: scrolling: redraw [ 71.477266] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 71.478536] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004a80000, using 7552k, total 7552k [ 71.478937] Console: switching to colour frame buffer device 200x75 [ 71.491459] fb0: VESA VGA frame buffer device [ 71.496962] init: plymouth-splash main process (1643) terminated with status 1 [ 397.545467] type=1400 audit(1372089892.125:27): apparmor="DENIED" operation="capable" parent=1 profile="/usr/sbin/cupsd" pid=996 comm="cupsd" pid=996 comm="cupsd" capability=36 capname="block_suspend" [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-rc7+ (rtg@salmon) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Mon Jun 24 10:34:03 MDT 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-rc7+ root=UUID=b4858c00-4d39-4102-a162-ee9aee526f10 ro quiet splash vt.handoff=7 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba935fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba936000-0x00000000bae86fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bae87000-0x00000000bf7befff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf7bf000-0x00000000bf8befff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf8bf000-0x00000000bfbbefff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bfbbf000-0x00000000bfbfefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bfbff000-0x00000000bfbfffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bfc00000-0x00000000dfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: AMD Larne/Larne, BIOS WLR3206X_Weekly_13_02_0 02/06/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-BFFFF write-back [ 0.000000] C0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back [ 0.000000] 1 base 0080000000 mask FFC0000000 write-back [ 0.000000] 2 base 00BFBA8000 mask FFFFFFF000 uncachable [ 0.000000] 3 base 00FF800000 mask FFFF800000 write-protect [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000011f000000 aka 4592M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xbfc00 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fe270-0x000fe27f] mapped at [ffff8800000fe270] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x01fc8000, 0x01fc8fff] PGTABLE [ 0.000000] BRK [0x01fc9000, 0x01fc9fff] PGTABLE [ 0.000000] BRK [0x01fca000, 0x01fcafff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11ee00000-0x11effffff] [ 0.000000] [mem 0x11ee00000-0x11effffff] page 2M [ 0.000000] BRK [0x01fcb000, 0x01fcbfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11edfffff] [ 0.000000] [mem 0x11c000000-0x11edfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0xba935fff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G [ 0.000000] [mem 0x80000000-0xba7fffff] page 2M [ 0.000000] [mem 0xba800000-0xba935fff] page 4k [ 0.000000] init_memory_mapping: [mem 0xbae87000-0xbf7befff] [ 0.000000] [mem 0xbae87000-0xbaffffff] page 4k [ 0.000000] [mem 0xbb000000-0xbf5fffff] page 2M [ 0.000000] [mem 0xbf600000-0xbf7befff] page 4k [ 0.000000] BRK [0x01fcc000, 0x01fccfff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xbfbff000-0xbfbfffff] [ 0.000000] [mem 0xbfbff000-0xbfbfffff] page 4k [ 0.000000] RAMDISK: [mem 0x36320000-0x37187fff] [ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 AMD) [ 0.000000] ACPI: XSDT 00000000bfbfe280 000C4 (v01 AMD LARNE 00000001 01000013) [ 0.000000] ACPI: FACP 00000000bfbfc000 0010C (v05 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: DSDT 00000000bfbf1000 06D1D (v01 AMD LARNE F0000000 ACPI 00040000) [ 0.000000] ACPI: FACS 00000000bfb67000 00040 [ 0.000000] ACPI: UEFI 00000000bfbfd000 00236 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: HPET 00000000bfbfb000 00038 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: APIC 00000000bfbfa000 00090 (v03 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: MCFG 00000000bfbf9000 0003C (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: ASF! 00000000bfbf8000 000A5 (v32 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: BOOT 00000000bfbf0000 00028 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: WDRT 00000000bfbef000 00047 (v01 AMD LARNE 00000000 ACPI 00040000) [ 0.000000] ACPI: WDAT 00000000bfbee000 001AC (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: FPDT 00000000bfbec000 00044 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbea000 00B10 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbe3000 06377 (v02 AMD LARNE 00000002 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbe2000 00194 (v01 AMD LARNE 00001000 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbe1000 00170 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbe0000 0042D (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbde000 013CA (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbdd000 0008C (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbdc000 00662 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbdb000 00D61 (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: SSDT 00000000bfbd9000 010BF (v01 AMD LARNE 00000001 ACPI 00040000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011effffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11effffff] [ 0.000000] NODE_DATA [mem 0x11eff7000-0x11effbfff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011ae00000-ffff88011e5fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11effffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009efff] [ 0.000000] node 0: [mem 0x00100000-0xba935fff] [ 0.000000] node 0: [mem 0xbae87000-0xbf7befff] [ 0.000000] node 0: [mem 0xbfbff000-0xbfbfffff] [ 0.000000] node 0: [mem 0x100000000-0x11effffff] [ 0.000000] On node 0 totalpages: 909837 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12170 pages used for memmap [ 0.000000] DMA32 zone: 778863 pages, LIFO batch:31 [ 0.000000] Normal zone: 1984 pages used for memmap [ 0.000000] Normal zone: 126976 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 5, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 72 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000ba936000 - 00000000bae87000 [ 0.000000] PM: Registered nosave memory: 00000000bf7bf000 - 00000000bf8bf000 [ 0.000000] PM: Registered nosave memory: 00000000bf8bf000 - 00000000bfbbf000 [ 0.000000] PM: Registered nosave memory: 00000000bfbbf000 - 00000000bfbff000 [ 0.000000] PM: Registered nosave memory: 00000000bfc00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec02000 [ 0.000000] PM: Registered nosave memory: 00000000fec02000 - 00000000fec10000 [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000 [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed80000 [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000 [ 0.000000] PM: Registered nosave memory: 00000000fed81000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000 [ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000 [ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011ec00000 s86464 r8192 d24128 u524288 [ 0.000000] pcpu-alloc: s86464 r8192 d24128 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 895598 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-rc7+ root=UUID=b4858c00-4d39-4102-a162-ee9aee526f10 ro quiet splash vt.handoff=7 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 0 size 32 MB [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000 [ 0.000000] Memory: 3418648k/4702208k available (7172k kernel code, 1062860k absent, 220700k reserved, 6120k data, 1348k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Experimental no-CBs for all CPUs [ 0.000000] Experimental no-CBs CPUs: 0-255. [ 0.000000] NR_IRQS:16640 nr_irqs:1024 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 14680064 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1497.195 MHz processor [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 2994.39 BogoMIPS (lpj=5988780) [ 0.000011] pid_max: default: 32768 minimum: 301 [ 0.000059] Security Framework initialized [ 0.000085] AppArmor: AppArmor initialized [ 0.000088] Yama: becoming mindful. [ 0.000696] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.002887] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.003959] Mount-cache hash table entries: 256 [ 0.004333] Initializing cgroup subsys memory [ 0.004354] Initializing cgroup subsys devices [ 0.004358] Initializing cgroup subsys freezer [ 0.004362] Initializing cgroup subsys blkio [ 0.004365] Initializing cgroup subsys perf_event [ 0.004371] Initializing cgroup subsys hugetlb [ 0.004420] tseg: 00bfc00000 [ 0.004426] CPU: Physical Processor ID: 0 [ 0.004428] CPU: Processor Core ID: 0 [ 0.004432] mce: CPU supports 6 MCE banks [ 0.004444] LVT offset 1 assigned for vector 0xf9 [ 0.004453] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.004453] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128 [ 0.004453] tlb_flushall_shift: 5 [ 0.004635] Freeing SMP alternatives: 24k freed [ 0.008633] ACPI: Core revision 20130328 [ 0.029043] ACPI: All ACPI Tables successfully acquired [ 0.033073] ftrace: allocating 27355 entries in 107 pages [ 0.055349] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.095047] smpboot: CPU0: AMD A4-5000 APU with Radeon(TM) HD Graphics (fam: 16, model: 00, stepping: 01) [ 0.203034] Performance Events: AMD PMU driver. [ 0.203043] ... version: 0 [ 0.203045] ... bit width: 48 [ 0.203048] ... generic registers: 4 [ 0.203051] ... value mask: 0000ffffffffffff [ 0.203053] ... max period: 00007fffffffffff [ 0.203056] ... fixed-purpose events: 0 [ 0.203058] ... event mask: 000000000000000f [ 0.205859] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.206046] smpboot: Booting Node 0, Processors #1 #2 #3 OK [ 0.245926] Brought up 4 CPUs [ 0.245936] smpboot: Total of 4 processors activated (11977.56 BogoMIPS) [ 0.247297] devtmpfs: initialized [ 0.249995] EVM: security.selinux [ 0.249999] EVM: security.SMACK64 [ 0.250002] EVM: security.capability [ 0.250137] PM: Registering ACPI NVS region [mem 0xbf8bf000-0xbfbbefff] (3145728 bytes) [ 0.252332] regulator-dummy: no parameters [ 0.252434] NET: Registered protocol family 16 [ 0.252788] ACPI: bus type PCI registered [ 0.252793] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.252911] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.252917] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.258611] PCI: Using configuration type 1 for base access [ 0.260671] bio: create slab <bio-0> at 0 [ 0.260999] ACPI: Added _OSI(Module Device) [ 0.261003] ACPI: Added _OSI(Processor Device) [ 0.261006] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.261010] ACPI: Added _OSI(Processor Aggregator Device) [ 0.264039] ACPI: EC: Look up EC in DSDT [ 0.267248] ACPI: Executed 1 blocks of module-level executable AML code [ 0.275827] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.344439] ACPI: Interpreter enabled [ 0.344456] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130328/hwxface-568) [ 0.344466] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.344496] ACPI: (supports S0 S3 S4 S5) [ 0.344501] ACPI: Using IOAPIC for interrupt routing [ 0.344803] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.345575] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.345617] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.346674] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.346699] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 0.441371] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.441857] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce9ff]) [ 0.441867] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.442076] PCI host bridge to bus 0000:00 [ 0.442083] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.442088] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.442093] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.442098] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.442102] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] [ 0.442107] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] [ 0.442111] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] [ 0.442115] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] [ 0.442120] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] [ 0.442124] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] [ 0.442128] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] [ 0.442132] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] [ 0.442136] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] [ 0.442141] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] [ 0.442145] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] [ 0.442149] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff] [ 0.442153] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff] [ 0.442158] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff] [ 0.442175] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000 [ 0.442349] pci 0000:00:01.0: [1002:9832] type 00 class 0x030000 [ 0.442370] pci 0000:00:01.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.442384] pci 0000:00:01.0: reg 18: [mem 0xf0000000-0xf07fffff 64bit pref] [ 0.442395] pci 0000:00:01.0: reg 20: [io 0x3000-0x30ff] [ 0.442406] pci 0000:00:01.0: reg 24: [mem 0xf0a00000-0xf0a3ffff] [ 0.442417] pci 0000:00:01.0: reg 30: [mem 0xfffe0000-0xffffffff pref] [ 0.442464] pci 0000:00:01.0: supports D1 D2 [ 0.442469] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.442574] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 [ 0.442593] pci 0000:00:01.1: reg 10: [mem 0xf0a40000-0xf0a43fff 64bit] [ 0.442670] pci 0000:00:01.1: supports D1 D2 [ 0.442803] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000 [ 0.442956] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400 [ 0.443042] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold [ 0.443094] pci 0000:00:02.3: System wakeup disabled by ACPI [ 0.443170] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400 [ 0.443256] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold [ 0.443394] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330 [ 0.443419] pci 0000:00:10.0: reg 10: [mem 0xf0a48000-0xf0a49fff 64bit] [ 0.443524] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.443602] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.443683] pci 0000:00:11.0: [1022:7804] type 00 class 0x010601 [ 0.443704] pci 0000:00:11.0: reg 10: [io 0x3118-0x311f] [ 0.443716] pci 0000:00:11.0: reg 14: [io 0x3124-0x3127] [ 0.443728] pci 0000:00:11.0: reg 18: [io 0x3110-0x3117] [ 0.443739] pci 0000:00:11.0: reg 1c: [io 0x3120-0x3123] [ 0.443751] pci 0000:00:11.0: reg 20: [io 0x3100-0x310f] [ 0.443763] pci 0000:00:11.0: reg 24: [mem 0xf0a4f000-0xf0a4f3ff] [ 0.443809] pci 0000:00:11.0: PME# supported from D3hot [ 0.443945] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.443961] pci 0000:00:12.0: reg 10: [mem 0xf0a4e000-0xf0a4efff] [ 0.444061] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.444136] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.444627] pci 0000:00:12.2: reg 10: [mem 0xf0a4d000-0xf0a4d0ff] [ 0.447281] pci 0000:00:12.2: supports D1 D2 [ 0.447285] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.447347] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.447423] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 0.447439] pci 0000:00:13.0: reg 10: [mem 0xf0a4c000-0xf0a4cfff] [ 0.447542] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.447616] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 [ 0.448069] pci 0000:00:13.2: reg 10: [mem 0xf0a4b000-0xf0a4b0ff] [ 0.450722] pci 0000:00:13.2: supports D1 D2 [ 0.450726] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.450790] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.450865] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.451045] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.451069] pci 0000:00:14.2: reg 10: [mem 0xf0a44000-0xf0a47fff 64bit] [ 0.451136] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.451251] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.451436] pci 0000:00:14.7: [1022:7813] type 00 class 0x080501 [ 0.451457] pci 0000:00:14.7: reg 10: [mem 0xf0a4a000-0xf0a4a0ff 64bit] [ 0.451627] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000 [ 0.451766] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000 [ 0.451901] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000 [ 0.452035] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000 [ 0.452178] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000 [ 0.452312] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000 [ 0.452582] pci 0000:01:00.0: [1969:1091] type 00 class 0x020000 [ 0.452624] pci 0000:01:00.0: reg 10: [mem 0xf0900000-0xf093ffff 64bit] [ 0.452644] pci 0000:01:00.0: reg 18: [io 0x2000-0x207f] [ 0.452769] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.462088] pci 0000:00:02.3: PCI bridge to [bus 01] [ 0.462105] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff] [ 0.462112] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff] [ 0.462344] pci 0000:02:00.0: [14e4:4359] type 00 class 0x028000 [ 0.462381] pci 0000:02:00.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit] [ 0.462522] pci 0000:02:00.0: supports D1 D2 [ 0.462527] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold [ 0.470128] pci 0000:00:02.5: PCI bridge to [bus 02] [ 0.470146] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff] [ 0.470376] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d) [ 0.470671] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted [ 0.487751] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.487874] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.488009] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.488141] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.488252] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.488351] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.488448] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.488547] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 [ 0.490604] ACPI: Enabled 4 GPEs in block 00 to 1F [ 0.490623] acpi root: \_SB_.PCI0 notify handler is installed [ 0.490736] Found 1 acpi root devices [ 0.490808] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 [ 0.508117] ACPI: No dock devices found. [ 0.508471] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.508483] vgaarb: loaded [ 0.508486] vgaarb: bridge control possible 0000:00:01.0 [ 0.508863] SCSI subsystem initialized [ 0.508868] ACPI: bus type ATA registered [ 0.508963] libata version 3.00 loaded. [ 0.508999] ACPI: bus type USB registered [ 0.509033] usbcore: registered new interface driver usbfs [ 0.509054] usbcore: registered new interface driver hub [ 0.509108] usbcore: registered new device driver usb [ 0.509344] PCI: Using ACPI for IRQ routing [ 0.511222] PCI: pci_cache_line_size set to 64 bytes [ 0.511352] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff] [ 0.511357] e820: reserve RAM buffer [mem 0xba936000-0xbbffffff] [ 0.511360] e820: reserve RAM buffer [mem 0xbf7bf000-0xbfffffff] [ 0.511363] e820: reserve RAM buffer [mem 0xbfc00000-0xbfffffff] [ 0.511366] e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff] [ 0.511543] NetLabel: Initializing [ 0.511546] NetLabel: domain hash size = 128 [ 0.511548] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.511568] NetLabel: unlabeled traffic allowed by default [ 0.511686] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.511694] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.513729] Switching to clocksource hpet [ 0.523359] AppArmor: AppArmor Filesystem Enabled [ 0.523412] pnp: PnP ACPI init [ 0.523438] ACPI: bus type PNP registered [ 0.523710] system 00:00: [mem 0xfec00000-0xfec01fff] could not be reserved [ 0.523717] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.523725] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.523973] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.524035] pnp 00:02: [dma 4] [ 0.524072] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.524139] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.524241] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.524295] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.524357] pnp 00:06: Plug and Play ACPI device, IDs FUJ7401 PNP0303 (active) [ 0.524414] pnp 00:07: Plug and Play ACPI device, IDs CIR0311 PNP0f13 (active) [ 0.524504] system 00:08: [io 0x0400-0x04cf] has been reserved [ 0.524510] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.524515] system 00:08: [io 0x04d6] has been reserved [ 0.524520] system 00:08: [io 0x0680-0x06ff] has been reserved [ 0.524524] system 00:08: [io 0x077a] has been reserved [ 0.524529] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 0.524534] system 00:08: [io 0x0c14] has been reserved [ 0.524538] system 00:08: [io 0x0c50-0x0c52] has been reserved [ 0.524543] system 00:08: [io 0x0c6c] has been reserved [ 0.524547] system 00:08: [io 0x0c6f] has been reserved [ 0.524552] system 00:08: [io 0x0cd0-0x0cdb] has been reserved [ 0.524557] system 00:08: [io 0x0840-0x0847] has been reserved [ 0.524563] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.524708] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.524714] system 00:09: [mem 0xff800000-0xffffffff] has been reserved [ 0.524721] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.525242] ACPI: IRQ 5 override to edge, high [ 0.525300] pnp 00:0a: Plug and Play ACPI device, IDs AMDc003 (active) [ 0.552380] pnp: PnP ACPI: found 11 devices [ 0.552388] ACPI: bus type PNP unregistered [ 0.561077] pci 0000:00:01.0: address space collision: [mem 0xfffe0000-0xffffffff pref] conflicts with reserved [mem 0xff800000-0xffffffff] [ 0.561138] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0a60000-0xf0a7ffff pref] [ 0.561146] pci 0000:00:02.3: PCI bridge to [bus 01] [ 0.561153] pci 0000:00:02.3: bridge window [io 0x2000-0x2fff] [ 0.561161] pci 0000:00:02.3: bridge window [mem 0xf0900000-0xf09fffff] [ 0.561172] pci 0000:00:02.5: PCI bridge to [bus 02] [ 0.561180] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff] [ 0.561440] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.561445] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.561450] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.561454] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] [ 0.561459] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] [ 0.561463] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] [ 0.561468] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] [ 0.561472] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] [ 0.561477] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] [ 0.561481] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] [ 0.561485] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] [ 0.561490] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] [ 0.561494] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] [ 0.561498] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] [ 0.561503] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff] [ 0.561507] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff] [ 0.561511] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff] [ 0.561516] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.561520] pci_bus 0000:01: resource 1 [mem 0xf0900000-0xf09fffff] [ 0.561525] pci_bus 0000:02: resource 1 [mem 0xf0800000-0xf08fffff] [ 0.561584] NET: Registered protocol family 2 [ 0.561917] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.562157] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.562313] TCP: Hash tables configured (established 32768 bind 32768) [ 0.562363] TCP: reno registered [ 0.562381] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.562417] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.562555] NET: Registered protocol family 1 [ 0.562580] pci 0000:00:01.0: Boot video device [ 1.198195] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag [ 1.198259] PCI: CLS 64 bytes, default 64 [ 1.198370] Trying to unpack rootfs image as initramfs... [ 1.713529] Freeing initrd memory: 14752k freed [ 1.719216] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.719230] software IO TLB [mem 0xbb7bf000-0xbf7bf000] (64MB) mapped at [ffff8800bb7bf000-ffff8800bf7befff] [ 1.719335] Simple Boot Flag at 0x44 set to 0x1 [ 1.719611] perf: AMD NB counters detected [ 1.719624] perf: AMD L2I counters detected [ 1.719672] LVT offset 0 assigned for vector 0x400 [ 1.719709] perf: AMD IBS detected (0x000000ff) [ 1.719764] Scanning for low memory corruption every 60 seconds [ 1.720198] Initialise module verification [ 1.720285] audit: initializing netlink socket (disabled) [ 1.720309] type=2000 audit(1372092131.608:1): initialized [ 1.770605] bounce pool size: 64 pages [ 1.770624] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.773344] VFS: Disk quotas dquot_6.5.2 [ 1.773433] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.774442] fuse init (API version 7.22) [ 1.774596] msgmni has been set to 6705 [ 1.775524] Key type asymmetric registered [ 1.775529] Asymmetric key parser 'x509' registered [ 1.775598] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.775672] io scheduler noop registered [ 1.775676] io scheduler deadline registered (default) [ 1.775727] io scheduler cfq registered [ 1.775947] pcieport 0000:00:02.3: irq 72 for MSI/MSI-X [ 1.776055] pcieport 0000:00:02.5: irq 73 for MSI/MSI-X [ 1.776185] pcieport 0000:00:02.3: Signaling PME through PCIe PME interrupt [ 1.776190] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.776197] pcie_pme 0000:00:02.3:pcie01: service driver pcie_pme loaded [ 1.776226] pcieport 0000:00:02.5: Signaling PME through PCIe PME interrupt [ 1.776231] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.776238] pcie_pme 0000:00:02.5:pcie01: service driver pcie_pme loaded [ 1.776261] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.776289] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.776405] vesafb: mode is 1600x1200x32, linelength=6400, pages=0 [ 1.776408] vesafb: scrolling: redraw [ 1.776412] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.777145] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004800000, using 7552k, total 7552k [ 1.922666] Console: switching to colour frame buffer device 200x75 [ 2.068013] fb0: VESA VGA frame buffer device [ 2.112009] ACPI: AC Adapter [ACAD] (on-line) [ 2.112191] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.112200] ACPI: Power Button [PWRB] [ 2.112293] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 2.112340] ACPI: Lid Switch [LID] [ 2.112406] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 2.112411] ACPI: Power Button [PWRF] [ 2.112559] ACPI: acpi_idle registered with cpuidle [ 2.222456] GHES: HEST is not enabled! [ 2.222691] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.224570] ACPI: Battery Slot [BATT] (battery absent) [ 2.225534] Linux agpgart interface v0.103 [ 2.228256] brd: module loaded [ 2.229663] loop: module loaded [ 2.230373] libphy: Fixed MDIO Bus: probed [ 2.230526] tun: Universal TUN/TAP device driver, 1.6 [ 2.230530] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 2.230645] PPP generic driver version 2.4.2 [ 2.230739] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.230743] ehci-pci: EHCI PCI platform driver [ 2.230935] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.230948] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.230961] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.230975] ehci-pci 0000:00:12.2: debug port 1 [ 2.231036] ehci-pci 0000:00:12.2: irq 17, io mem 0xf0a4d000 [ 2.242082] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.242153] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.242158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.242163] usb usb1: Product: EHCI Host Controller [ 2.242168] usb usb1: Manufacturer: Linux 3.10.0-rc7+ ehci_hcd [ 2.242172] usb usb1: SerialNumber: 0000:00:12.2 [ 2.242417] hub 1-0:1.0: USB hub found [ 2.242426] hub 1-0:1.0: 4 ports detected [ 2.242770] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.242782] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.242790] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.242804] ehci-pci 0000:00:13.2: debug port 1 [ 2.242845] ehci-pci 0000:00:13.2: irq 17, io mem 0xf0a4b000 [ 2.254087] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.254152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.254158] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.254163] usb usb2: Product: EHCI Host Controller [ 2.254168] usb usb2: Manufacturer: Linux 3.10.0-rc7+ ehci_hcd [ 2.254172] usb usb2: SerialNumber: 0000:00:13.2 [ 2.254426] hub 2-0:1.0: USB hub found [ 2.254436] hub 2-0:1.0: 4 ports detected [ 2.254615] ehci-platform: EHCI generic platform driver [ 2.254637] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.254843] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.254859] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 2.254904] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0a4e000 [ 2.314115] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.314124] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.314129] usb usb3: Product: OHCI Host Controller [ 2.314133] usb usb3: Manufacturer: Linux 3.10.0-rc7+ ohci_hcd [ 2.314138] usb usb3: SerialNumber: 0000:00:12.0 [ 2.314429] hub 3-0:1.0: USB hub found [ 2.314440] hub 3-0:1.0: 4 ports detected [ 2.314786] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.314799] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 2.314828] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0a4c000 [ 2.374106] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.374114] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.374119] usb usb4: Product: OHCI Host Controller [ 2.374124] usb usb4: Manufacturer: Linux 3.10.0-rc7+ ohci_hcd [ 2.374128] usb usb4: SerialNumber: 0000:00:13.0 [ 2.374439] hub 4-0:1.0: USB hub found [ 2.374450] hub 4-0:1.0: 4 ports detected [ 2.374665] uhci_hcd: USB Universal Host Controller Interface driver [ 2.374898] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.374911] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5 [ 2.375156] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X [ 2.375170] xhci_hcd 0000:00:10.0: irq 75 for MSI/MSI-X [ 2.375183] xhci_hcd 0000:00:10.0: irq 76 for MSI/MSI-X [ 2.375195] xhci_hcd 0000:00:10.0: irq 77 for MSI/MSI-X [ 2.375207] xhci_hcd 0000:00:10.0: irq 78 for MSI/MSI-X [ 2.375347] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.375352] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.375356] usb usb5: Product: xHCI Host Controller [ 2.375360] usb usb5: Manufacturer: Linux 3.10.0-rc7+ xhci_hcd [ 2.375364] usb usb5: SerialNumber: 0000:00:10.0 [ 2.375504] xHCI xhci_add_endpoint called for root hub [ 2.375509] xHCI xhci_check_bandwidth called for root hub [ 2.375549] hub 5-0:1.0: USB hub found [ 2.375559] hub 5-0:1.0: 2 ports detected [ 2.375659] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.375667] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6 [ 2.378505] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.378510] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.378514] usb usb6: Product: xHCI Host Controller [ 2.378518] usb usb6: Manufacturer: Linux 3.10.0-rc7+ xhci_hcd [ 2.378521] usb usb6: SerialNumber: 0000:00:10.0 [ 2.378657] xHCI xhci_add_endpoint called for root hub [ 2.378660] xHCI xhci_check_bandwidth called for root hub [ 2.378701] hub 6-0:1.0: USB hub found [ 2.378711] hub 6-0:1.0: 2 ports detected [ 2.398311] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.404836] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.404851] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.405139] mousedev: PS/2 mouse device common for all mice [ 2.405436] rtc_cmos 00:04: RTC can wake from S4 [ 2.405597] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 2.405632] rtc_cmos 00:04: alarms up to one month, 114 bytes nvram, hpet irqs [ 2.405763] device-mapper: uevent: version 1.0.3 [ 2.405876] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: [email protected] [ 2.406006] cpuidle: using governor ladder [ 2.406157] cpuidle: using governor menu [ 2.406176] ledtrig-cpu: registered to indicate activity on CPUs [ 2.406463] ashmem: initialized [ 2.406741] TCP: cubic registered [ 2.406922] NET: Registered protocol family 10 [ 2.407272] NET: Registered protocol family 17 [ 2.407290] Key type dns_resolver registered [ 2.407825] Loading module verification certificates [ 2.410159] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: a8aa021c7e76021771cdc90f1a6f4dbbdcc1df00' [ 2.410182] registered taskstats version 1 [ 2.411177] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.414968] Key type trusted registered [ 2.418997] Key type encrypted registered [ 2.423762] rtc_cmos 00:04: setting system clock to 2013-06-24 16:42:12 UTC (1372092132) [ 2.423985] acpi-cpufreq: overriding BIOS provided _PSD data [ 2.424289] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.424293] EDD information not available. [ 2.427003] Freeing unused kernel memory: 1348k freed [ 2.427458] Write protecting the kernel read-only data: 12288k [ 2.433185] Freeing unused kernel memory: 1008k freed [ 2.438619] Freeing unused kernel memory: 940k freed [ 2.471660] udevd[114]: starting version 175 [ 2.594310] ahci 0000:00:11.0: version 3.0 [ 2.594584] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.594592] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part [ 2.597101] scsi0 : ahci [ 2.598570] sdhci: Secure Digital Host Controller Interface driver [ 2.598575] sdhci: Copyright(c) Pierre Ossman [ 2.598675] scsi1 : ahci [ 2.598791] ata1: SATA max UDMA/133 abar m1024@0xf0a4f000 port 0xf0a4f100 irq 19 [ 2.598797] ata2: SATA max UDMA/133 abar m1024@0xf0a4f000 port 0xf0a4f180 irq 19 [ 2.601870] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1) [ 2.602312] mmc0: no vqmmc regulator found [ 2.602317] mmc0: no vmmc regulator found [ 2.602456] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA [ 2.718123] tsc: Refined TSC clocksource calibration: 1497.191 MHz [ 2.718141] Switching to clocksource tsc [ 2.738130] usb 5-1: new full-speed USB device number 2 using xhci_hcd [ 2.786590] usb 5-1: New USB device found, idVendor=413c, idProduct=1004 [ 2.786599] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.786604] usb 5-1: Product: Dell USB Keyboard Hub [ 2.786609] usb 5-1: Manufacturer: Dell [ 2.786862] usb 5-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 192 microframes [ 2.804649] hub 5-1:1.0: USB hub found [ 2.808581] hub 5-1:1.0: 3 ports detected [ 2.954154] usb 3-2: new low-speed USB device number 2 using ohci_hcd [ 3.090171] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.090206] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3.103391] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133 [ 3.103399] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 3.104975] ata2.00: ATAPI: HL-DT-ST BDDVDRW CT40N, 1.00, max UDMA/133 [ 3.105826] ata1.00: configured for UDMA/133 [ 3.106128] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0001 PQ: 0 ANSI: 5 [ 3.106913] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 3.106989] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.107125] sd 0:0:0:0: [sda] Write Protect is off [ 3.107131] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.107204] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.108786] ata2.00: configured for UDMA/133 [ 3.113756] scsi 1:0:0:0: CD-ROM HL-DT-ST BDDVDRW CT40N 1.00 PQ: 0 ANSI: 5 [ 3.118108] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 3.118117] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 3.118393] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 3.118545] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 3.119196] usb 3-2: New USB device found, idVendor=0461, idProduct=4d15 [ 3.119202] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.119207] usb 3-2: Product: USB Optical Mouse [ 3.130353] hidraw: raw HID events driver (C) Jiri Kosina [ 3.138350] usbcore: registered new interface driver usbhid [ 3.138356] usbhid: USB HID core driver [ 3.145311] input: USB Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4 [ 3.145564] hid-generic 0003:0461:4D15.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:12.0-2/input0 [ 3.150288] sda: sda1 sda2 < sda5 > [ 3.151104] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.196732] usb 5-1.1: new low-speed USB device number 3 using xhci_hcd [ 3.250672] usb 5-1.1: New USB device found, idVendor=413c, idProduct=2006 [ 3.250681] usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.250686] usb 5-1.1: Product: Dell USB Keyboard Hub [ 3.250690] usb 5-1.1: Manufacturer: Dell [ 3.250944] usb 5-1.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.250952] usb 5-1.1: ep 0x82 - rounding interval to 1024 microframes, ep desc says 2040 microframes [ 3.280290] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1.1/5-1.1:1.0/input/input5 [ 3.280537] hid-generic 0003:413C:2006.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard Hub] on usb-0000:00:10.0-1.1/input0 [ 3.321926] input: Dell Dell USB Keyboard Hub as /devices/pci0000:00/0000:00:10.0/usb5/5-1/5-1.1/5-1.1:1.1/input/input6 [ 3.322199] hid-generic 0003:413C:2006.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell USB Keyboard Hub] on usb-0000:00:10.0-1.1/input1 [ 4.318867] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 6.063050] init: ureadahead main process (285) terminated with status 5 [ 7.372643] Adding 3637244k swap on /dev/sda5. Priority:-1 extents:1 across:3637244k FS [ 8.904038] udevd[360]: starting version 175 [ 10.047973] lp: driver loaded but no devices found [ 10.370954] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 10.636046] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness [ 10.679040] acpi device:01: registered as cooling_device4 [ 10.679083] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 10.679163] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 10.732544] MCE: In-kernel MCE decoding enabled. [ 11.273549] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMBS.SMB0 1 (20130328/utaddress-251) [ 11.273565] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 11.312664] bcma: bus0: Found chip with id 0xA8DC, rev 0x00 and package 0x08 [ 11.312693] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 11.312716] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1E, class 0x0) [ 11.312756] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x12, class 0x0) [ 11.312777] bcma: bus0: Core 3 found: SDIO Device (manuf 0x4BF, id 0x829, rev 0x07, class 0x0) [ 11.325613] bcma: bus0: Bus registered [ 11.348358] EDAC MC: Ver: 3.0.0 [ 11.558149] AMD64 EDAC driver v3.4.0 [ 11.558206] EDAC amd64: DRAM ECC disabled. [ 11.558236] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 11.558236] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 11.558236] (Note that use of the override may cause unknown side effects.) [ 11.580690] microcode: CPU0: patch_level=0x07000106 [ 11.676940] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64 [ 11.751705] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input8 [ 11.802109] microcode: failed to load file amd-ucode/microcode_amd_fam16h.bin [ 11.802990] microcode: CPU1: patch_level=0x07000106 [ 11.803007] microcode: CPU2: patch_level=0x07000106 [ 11.803024] microcode: CPU3: patch_level=0x07000106 [ 11.803179] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba [ 12.871185] type=1400 audit(1372092142.942:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=671 comm="apparmor_parser" [ 12.871308] type=1400 audit(1372092142.942:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=671 comm="apparmor_parser" [ 12.871400] type=1400 audit(1372092142.942:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=671 comm="apparmor_parser" [ 12.886301] hda-intel 0000:00:01.1: Using LPIB position fix [ 12.886366] snd_hda_intel 0000:00:01.1: irq 79 for MSI/MSI-X [ 12.888339] hda-intel 0000:00:01.1: Enable sync_write for stable communication [ 12.898317] kvm: Nested Virtualization enabled [ 12.898327] kvm: Nested Paging enabled [ 12.922959] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9 [ 12.923125] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10 [ 12.923744] hda-intel 0000:00:14.2: Using LPIB position fix [ 12.928598] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 12.998421] hda_codec: CX20751/2: BIOS auto-probing. [ 12.998724] autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 12.998744] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 12.998748] hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 12.998750] mono: mono_out=0x0 [ 12.998753] inputs: [ 12.998756] Internal Mic=0x1a [ 12.998760] Mic=0x18 [ 13.001989] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 [ 13.002159] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 [ 13.222262] od_set_powersave_bias !policy, cpu 0 [ 13.222843] od_set_powersave_bias !policy, cpu 1 [ 13.223380] od_set_powersave_bias !policy, cpu 2 [ 13.223922] od_set_powersave_bias !policy, cpu 3 [ 14.193279] init: failsafe main process (794) killed by TERM signal [ 15.125599] ppdev: user-space parallel port driver [ 15.994339] Bluetooth: Core ver 2.16 [ 15.994383] NET: Registered protocol family 31 [ 15.994387] Bluetooth: HCI device and connection manager initialized [ 15.994404] Bluetooth: HCI socket layer initialized [ 15.994410] Bluetooth: L2CAP socket layer initialized [ 15.994423] Bluetooth: SCO socket layer initialized [ 16.474361] type=1400 audit(1372092146.542:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=898 comm="apparmor_parser" [ 16.474612] type=1400 audit(1372092146.542:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=898 comm="apparmor_parser" [ 16.511690] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 16.511697] Bluetooth: BNEP filters: protocol multicast [ 16.511716] Bluetooth: BNEP socket layer initialized [ 16.637262] Bluetooth: RFCOMM TTY layer initialized [ 16.637294] Bluetooth: RFCOMM socket layer initialized [ 16.637298] Bluetooth: RFCOMM ver 1.11 [ 18.770472] type=1400 audit(1372092148.838:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=958 comm="apparmor_parser" [ 19.120501] type=1400 audit(1372092149.190:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=959 comm="apparmor_parser" [ 19.120744] type=1400 audit(1372092149.190:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=959 comm="apparmor_parser" [ 19.120893] type=1400 audit(1372092149.190:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=959 comm="apparmor_parser" [ 19.696222] type=1400 audit(1372092149.766:11): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=967 comm="apparmor_parser" [ 20.091938] type=1400 audit(1372092150.162:12): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=962 comm="apparmor_parser" [ 20.092347] type=1400 audit(1372092150.162:13): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=962 comm="apparmor_parser" [ 20.107903] type=1400 audit(1372092150.178:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=965 comm="apparmor_parser" [ 20.108284] type=1400 audit(1372092150.178:15): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=965 comm="apparmor_parser" [ 33.798801] type=1400 audit(1372092163.866:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=960 comm="apparmor_parser" [ 33.800406] type=1400 audit(1372092163.870:17): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=960 comm="apparmor_parser" [ 33.800805] type=1400 audit(1372092163.870:18): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=960 comm="apparmor_parser" [ 33.801845] type=1400 audit(1372092163.870:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=960 comm="apparmor_parser" [ 33.802836] type=1400 audit(1372092163.870:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=960 comm="apparmor_parser" [ 33.803208] type=1400 audit(1372092163.870:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=960 comm="apparmor_parser" [ 33.803897] type=1400 audit(1372092163.870:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=960 comm="apparmor_parser" [ 33.804597] type=1400 audit(1372092163.874:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=960 comm="apparmor_parser"
From 4df0d19bb081f3675a910eeb025fb1b01b9f719c Mon Sep 17 00:00:00 2001
From: Tim Gardner <[email protected]>
Date: Mon, 24 Jun 2013 10:09:05 -0600
Subject: [PATCH] cpufreq_ondemand.c: Added debug
--- drivers/cpufreq/cpufreq_ondemand.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
drivers/cpufreq/cpufreq_ondemand.c +12 -0
@@ -593,8 +593,20 @@ static void od_set_powersave_bias(unsigned int powersave_bias)continue ; policy =per_cpu (od_cpu_dbs_info, cpu).cdbs.cur_policy; +if (!policy) { +printk (KERN_ERR "%s !policy, cpu %u\n" ,__func__,cpu); +continue ; + } dbs_data = policy->governor_data; +if (!dbs_data) { +printk (KERN_ERR "%s !dbs_data, cpu %u\n" ,__func__,cpu); +continue ; + } od_tuners = dbs_data->tuners; +if (!od_tuners) { +printk (KERN_ERR "%s !od_tuners, cpu %u\n" ,__func__,cpu); +continue ; + } od_tuners->powersave_bias = powersave_bias;cpumask_or (&done, &done, policy->cpus);
Signature · 1 line
1.7.9.5
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 3.10.0-rc7 Kernel Configuration
#CONFIG_64BIT=yCONFIG_X86_64=yCONFIG_X86=yCONFIG_INSTRUCTION_DECODER=yCONFIG_OUTPUT_FORMAT="elf64-x86-64"CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"CONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_MMU=yCONFIG_NEED_DMA_MAP_STATE=yCONFIG_NEED_SG_DMA_LENGTH=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_GENERIC_HWEIGHT=yCONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_RWSEM_XCHGADD_ALGORITHM=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_ARCH_HAS_CPU_AUTOPROBE=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=yCONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=yCONFIG_AUDIT_ARCH=yCONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=yCONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=yCONFIG_HAVE_INTEL_TXT=yCONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_CPU_PROBE_RELEASE=yCONFIG_ARCH_SUPPORTS_UPROBES=yCONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"CONFIG_IRQ_WORK=yCONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#CONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_CROSS_COMPILE=""CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not setCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_HAVE_KERNEL_XZ=yCONFIG_HAVE_KERNEL_LZO=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not setCONFIG_DEFAULT_HOSTNAME="(none)"CONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_FHANDLE=yCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_WATCH=yCONFIG_AUDIT_TREE=y
# CONFIG_AUDIT_LOGINUID_IMMUTABLE is not setCONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#CONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_IRQ_SHOW=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_GENERIC_IRQ_CHIP=yCONFIG_IRQ_DOMAIN=y
# CONFIG_IRQ_DOMAIN_DEBUG is not setCONFIG_IRQ_FORCED_THREADING=yCONFIG_SPARSE_IRQ=yCONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_ARCH_CLOCKSOURCE_DATA=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=yCONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
# CONFIG_NO_HZ_IDLE is not setCONFIG_NO_HZ_FULL=y
# CONFIG_NO_HZ_FULL_ALL is not setCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#CONFIG_VIRT_CPU_ACCOUNTING=yCONFIG_VIRT_CPU_ACCOUNTING_GEN=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#CONFIG_TREE_RCU=y
# CONFIG_PREEMPT_RCU is not setCONFIG_RCU_STALL_COMMON=yCONFIG_CONTEXT_TRACKING=yCONFIG_RCU_USER_QS=yCONFIG_CONTEXT_TRACKING_FORCE=yCONFIG_RCU_FANOUT=64CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not setCONFIG_RCU_FAST_NO_HZ=y
# CONFIG_TREE_RCU_TRACE is not setCONFIG_RCU_NOCB_CPU=yCONFIG_RCU_NOCB_CPU_ALL=y
# CONFIG_IKCONFIG is not setCONFIG_LOG_BUF_SHIFT=18CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=yCONFIG_ARCH_SUPPORTS_NUMA_BALANCING=yCONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=yCONFIG_ARCH_USES_NUMA_PROT_NONE=yCONFIG_NUMA_BALANCING_DEFAULT_ENABLED=yCONFIG_NUMA_BALANCING=yCONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not setCONFIG_CGROUP_FREEZER=yCONFIG_CGROUP_DEVICE=yCONFIG_CPUSETS=yCONFIG_PROC_PID_CPUSET=yCONFIG_CGROUP_CPUACCT=yCONFIG_RESOURCE_COUNTERS=yCONFIG_MEMCG=yCONFIG_MEMCG_SWAP=y
# CONFIG_MEMCG_SWAP_ENABLED is not set
# CONFIG_MEMCG_KMEM is not setCONFIG_CGROUP_HUGETLB=yCONFIG_CGROUP_PERF=yCONFIG_CGROUP_SCHED=yCONFIG_FAIR_GROUP_SCHED=yCONFIG_CFS_BANDWIDTH=yCONFIG_RT_GROUP_SCHED=yCONFIG_BLK_CGROUP=y
# CONFIG_DEBUG_BLK_CGROUP is not setCONFIG_CHECKPOINT_RESTORE=yCONFIG_NAMESPACES=yCONFIG_UTS_NS=yCONFIG_IPC_NS=yCONFIG_PID_NS=yCONFIG_NET_NS=yCONFIG_SCHED_AUTOGROUP=yCONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not setCONFIG_RELAY=yCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=yCONFIG_RD_LZMA=yCONFIG_RD_XZ=yCONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_HAVE_UID16=yCONFIG_SYSCTL_EXCEPTION_TRACE=yCONFIG_HOTPLUG=yCONFIG_HAVE_PCSPKR_PLATFORM=yCONFIG_EXPERT=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=yCONFIG_PCSPKR_PLATFORM=yCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not setCONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not setCONFIG_VM_EVENT_COUNTERS=yCONFIG_SLUB_DEBUG=y
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_OPROFILE=m
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not setCONFIG_HAVE_OPROFILE=yCONFIG_OPROFILE_NMI_TIMER=yCONFIG_KPROBES=yCONFIG_JUMP_LABEL=yCONFIG_OPTPROBES=yCONFIG_KPROBES_ON_FTRACE=yCONFIG_UPROBES=y
# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not setCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_ARCH_USE_BUILTIN_BSWAP=yCONFIG_KRETPROBES=yCONFIG_USER_RETURN_NOTIFIER=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_OPTPROBES=yCONFIG_HAVE_KPROBES_ON_FTRACE=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_USE_GENERIC_SMP_HELPERS=yCONFIG_GENERIC_SMP_IDLE_THREAD=yCONFIG_HAVE_REGS_AND_STACK_ACCESS_API=yCONFIG_HAVE_CLK=yCONFIG_HAVE_DMA_API_DEBUG=yCONFIG_HAVE_HW_BREAKPOINT=yCONFIG_HAVE_MIXED_BREAKPOINTS_REGS=yCONFIG_HAVE_USER_RETURN_NOTIFIER=yCONFIG_HAVE_PERF_EVENTS_NMI=yCONFIG_HAVE_PERF_REGS=yCONFIG_HAVE_PERF_USER_STACK_DUMP=yCONFIG_HAVE_ARCH_JUMP_LABEL=yCONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=yCONFIG_HAVE_ALIGNED_STRUCT_PAGE=yCONFIG_HAVE_CMPXCHG_LOCAL=yCONFIG_HAVE_CMPXCHG_DOUBLE=yCONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=yCONFIG_ARCH_WANT_OLD_COMPAT_IPC=yCONFIG_HAVE_ARCH_SECCOMP_FILTER=yCONFIG_SECCOMP_FILTER=yCONFIG_HAVE_CONTEXT_TRACKING=yCONFIG_HAVE_IRQ_TIME_ACCOUNTING=yCONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=yCONFIG_MODULES_USE_ELF_RELA=yCONFIG_OLD_SIGSUSPEND3=yCONFIG_COMPAT_OLD_SIGACTION=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not setCONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not setCONFIG_MODVERSIONS=yCONFIG_MODULE_SRCVERSION_ALL=yCONFIG_MODULE_SIG=y
# CONFIG_MODULE_SIG_FORCE is not setCONFIG_MODULE_SIG_ALL=y
# CONFIG_MODULE_SIG_SHA1 is not set
# CONFIG_MODULE_SIG_SHA224 is not set
# CONFIG_MODULE_SIG_SHA256 is not set
# CONFIG_MODULE_SIG_SHA384 is not setCONFIG_MODULE_SIG_SHA512=yCONFIG_MODULE_SIG_HASH="sha512"CONFIG_STOP_MACHINE=yCONFIG_BLOCK=yCONFIG_BLK_DEV_BSG=yCONFIG_BLK_DEV_BSGLIB=yCONFIG_BLK_DEV_INTEGRITY=yCONFIG_BLK_DEV_THROTTLING=y
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=yCONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not setCONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not setCONFIG_ACORN_PARTITION_RISCIX=yCONFIG_OSF_PARTITION=yCONFIG_AMIGA_PARTITION=yCONFIG_ATARI_PARTITION=yCONFIG_MAC_PARTITION=yCONFIG_MSDOS_PARTITION=yCONFIG_BSD_DISKLABEL=yCONFIG_MINIX_SUBPARTITION=yCONFIG_SOLARIS_X86_PARTITION=yCONFIG_UNIXWARE_DISKLABEL=yCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not setCONFIG_SGI_PARTITION=yCONFIG_ULTRIX_PARTITION=yCONFIG_SUN_PARTITION=yCONFIG_KARMA_PARTITION=yCONFIG_EFI_PARTITION=yCONFIG_SYSV68_PARTITION=yCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=yCONFIG_CFQ_GROUP_IOSCHED=yCONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="deadline"CONFIG_PREEMPT_NOTIFIERS=yCONFIG_PADATA=yCONFIG_ASN1=yCONFIG_INLINE_SPIN_UNLOCK_IRQ=yCONFIG_INLINE_READ_UNLOCK=yCONFIG_INLINE_READ_UNLOCK_IRQ=yCONFIG_INLINE_WRITE_UNLOCK=yCONFIG_INLINE_WRITE_UNLOCK_IRQ=yCONFIG_MUTEX_SPIN_ON_OWNER=yCONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_ZONE_DMA=yCONFIG_SMP=yCONFIG_X86_X2APIC=yCONFIG_X86_MPPARSE=yCONFIG_X86_EXTENDED_PLATFORM=yCONFIG_X86_NUMACHIP=y
# CONFIG_X86_VSMP is not set
# CONFIG_X86_UV is not setCONFIG_X86_INTEL_LPSS=yCONFIG_X86_SUPPORTS_MEMORY_FAILURE=yCONFIG_SCHED_OMIT_FRAME_POINTER=yCONFIG_HYPERVISOR_GUEST=yCONFIG_PARAVIRT=y
# CONFIG_PARAVIRT_DEBUG is not setCONFIG_PARAVIRT_SPINLOCKS=yCONFIG_XEN=yCONFIG_XEN_DOM0=yCONFIG_XEN_PRIVILEGED_GUEST=yCONFIG_XEN_PVHVM=yCONFIG_XEN_MAX_DOMAIN_MEMORY=500CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not setCONFIG_KVM_GUEST=y
# CONFIG_PARAVIRT_TIME_ACCOUNTING is not setCONFIG_PARAVIRT_CLOCK=yCONFIG_NO_BOOTMEM=yCONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not setCONFIG_GENERIC_CPU=yCONFIG_X86_INTERNODE_CACHE_SHIFT=6CONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=yCONFIG_PROCESSOR_SELECT=yCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=yCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=yCONFIG_CALGARY_IOMMU=yCONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=yCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not setCONFIG_NR_CPUS=256CONFIG_SCHED_SMT=yCONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not setCONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=yCONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=yCONFIG_X86_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=yCONFIG_X86_MCE_INJECT=mCONFIG_X86_THERMAL_VECTOR=yCONFIG_I8K=mCONFIG_MICROCODE=mCONFIG_MICROCODE_INTEL=yCONFIG_MICROCODE_AMD=yCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_MICROCODE_INTEL_LIB=yCONFIG_MICROCODE_INTEL_EARLY=yCONFIG_MICROCODE_EARLY=yCONFIG_X86_MSR=mCONFIG_X86_CPUID=mCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_ARCH_DMA_ADDR_T_64BIT=yCONFIG_DIRECT_GBPAGES=yCONFIG_NUMA=yCONFIG_AMD_NUMA=yCONFIG_X86_64_ACPI_NUMA=yCONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_NUMA_EMU is not setCONFIG_NODES_SHIFT=6CONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_ARCH_MEMORY_PROBE=yCONFIG_ARCH_PROC_KCORE_TEXT=yCONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000CONFIG_SELECT_MEMORY_MODEL=yCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_NEED_MULTIPLE_NODES=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=yCONFIG_SPARSEMEM_VMEMMAP=yCONFIG_HAVE_MEMBLOCK=yCONFIG_HAVE_MEMBLOCK_NODE_MAP=yCONFIG_ARCH_DISCARD_MEMBLOCK=yCONFIG_MEMORY_ISOLATION=yCONFIG_MOVABLE_NODE=yCONFIG_HAVE_BOOTMEM_INFO_NODE=yCONFIG_MEMORY_HOTPLUG=yCONFIG_MEMORY_HOTPLUG_SPARSE=yCONFIG_MEMORY_HOTREMOVE=yCONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_BALLOON_COMPACTION=yCONFIG_COMPACTION=yCONFIG_MIGRATION=yCONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_NEED_BOUNCE_POOL=yCONFIG_VIRT_TO_BUS=yCONFIG_MMU_NOTIFIER=yCONFIG_KSM=yCONFIG_DEFAULT_MMAP_MIN_ADDR=65536CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=yCONFIG_MEMORY_FAILURE=yCONFIG_HWPOISON_INJECT=mCONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not setCONFIG_TRANSPARENT_HUGEPAGE_MADVISE=yCONFIG_CROSS_MEMORY_ATTACH=yCONFIG_CLEANCACHE=yCONFIG_FRONTSWAP=yCONFIG_X86_CHECK_BIOS_CORRUPTION=yCONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=yCONFIG_X86_RESERVE_LOW=64CONFIG_MTRR=yCONFIG_MTRR_SANITIZER=yCONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1CONFIG_X86_PAT=yCONFIG_ARCH_USES_PG_UNCACHED=yCONFIG_ARCH_RANDOM=yCONFIG_X86_SMAP=yCONFIG_EFI=yCONFIG_EFI_STUB=yCONFIG_SECCOMP=yCONFIG_CC_STACKPROTECTOR=y
# CONFIG_HZ_100 is not setCONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not setCONFIG_HZ=250CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=yCONFIG_CRASH_DUMP=yCONFIG_KEXEC_JUMP=yCONFIG_PHYSICAL_START=0x1000000CONFIG_RELOCATABLE=yCONFIG_PHYSICAL_ALIGN=0x1000000CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=yCONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=yCONFIG_USE_PERCPU_NUMA_NODE_ID=y
#
# Power management and ACPI options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATE_CALLBACKS=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_PM_SLEEP=yCONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not setCONFIG_PM_RUNTIME=yCONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_CLK=yCONFIG_ACPI=yCONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not setCONFIG_ACPI_EC_DEBUGFS=mCONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_AC=yCONFIG_ACPI_BATTERY=yCONFIG_ACPI_BUTTON=yCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=yCONFIG_ACPI_DOCK=yCONFIG_ACPI_I2C=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_IPMI=mCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_PROCESSOR_AGGREGATOR=mCONFIG_ACPI_THERMAL=yCONFIG_ACPI_NUMA=yCONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not setCONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not setCONFIG_ACPI_PCI_SLOT=yCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_HOTPLUG_MEMORY=yCONFIG_ACPI_SBS=mCONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not setCONFIG_ACPI_BGRT=yCONFIG_ACPI_APEI=yCONFIG_ACPI_APEI_GHES=yCONFIG_ACPI_APEI_PCIEAER=yCONFIG_ACPI_APEI_MEMORY_FAILURE=yCONFIG_ACPI_APEI_EINJ=m
# CONFIG_ACPI_APEI_ERST_DEBUG is not setCONFIG_SFI=y
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers # CONFIG_X86_INTEL_PSTATE=y CONFIG_X86_PCC_CPUFREQ=y CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_ACPI_CPUFREQ_CPB=y CONFIG_X86_POWERNOW_K8=y CONFIG_X86_AMD_FREQ_SENSITIVITY=m CONFIG_X86_SPEEDSTEP_CENTRINO=y CONFIG_X86_P4_CLOCKMOD=m
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set CONFIG_INTEL_IDLE=y
#
# Memory power savings
#CONFIG_I7300_IDLE_IOAT_CHANNEL=yCONFIG_I7300_IDLE=m
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_XEN=yCONFIG_PCI_DOMAINS=y
# CONFIG_PCI_CNB20LE_QUIRK is not setCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=yCONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not setCONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not setCONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not setCONFIG_PCIE_PME=yCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not setCONFIG_PCI_REALLOC_ENABLE_AUTO=yCONFIG_PCI_STUB=mCONFIG_XEN_PCIDEV_FRONTEND=mCONFIG_HT_IRQ=yCONFIG_PCI_ATS=yCONFIG_PCI_IOV=yCONFIG_PCI_PRI=yCONFIG_PCI_PASID=yCONFIG_PCI_IOAPIC=yCONFIG_PCI_LABEL=yCONFIG_ISA_DMA_API=yCONFIG_AMD_NB=yCONFIG_PCCARD=mCONFIG_PCMCIA=mCONFIG_PCMCIA_LOAD_CIS=yCONFIG_CARDBUS=y
#
# PC-card bridges
#CONFIG_YENTA=mCONFIG_YENTA_O2=yCONFIG_YENTA_RICOH=yCONFIG_YENTA_TI=yCONFIG_YENTA_ENE_TUNE=yCONFIG_YENTA_TOSHIBA=yCONFIG_PD6729=mCONFIG_I82092=mCONFIG_PCCARD_NONSTATIC=yCONFIG_HOTPLUG_PCI=yCONFIG_HOTPLUG_PCI_ACPI=yCONFIG_HOTPLUG_PCI_ACPI_IBM=mCONFIG_HOTPLUG_PCI_CPCI=yCONFIG_HOTPLUG_PCI_CPCI_ZT5550=mCONFIG_HOTPLUG_PCI_CPCI_GENERIC=mCONFIG_HOTPLUG_PCI_SHPC=mCONFIG_RAPIDIO=yCONFIG_RAPIDIO_TSI721=yCONFIG_RAPIDIO_DISC_TIMEOUT=30
# CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not setCONFIG_RAPIDIO_DMA_ENGINE=y
# CONFIG_RAPIDIO_DEBUG is not setCONFIG_RAPIDIO_ENUM_BASIC=mCONFIG_RAPIDIO_TSI57X=yCONFIG_RAPIDIO_CPS_XX=yCONFIG_RAPIDIO_TSI568=yCONFIG_RAPIDIO_CPS_GEN2=yCONFIG_RAPIDIO_TSI500=y
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=yCONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=mCONFIG_COREDUMP=yCONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not setCONFIG_X86_X32=yCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_KEYS_COMPAT=yCONFIG_HAVE_TEXT_POKE_SMP=yCONFIG_X86_DEV_DMA_OPS=yCONFIG_NET=yCONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_DIAG=mCONFIG_UNIX=yCONFIG_UNIX_DIAG=mCONFIG_XFRM=yCONFIG_XFRM_ALGO=mCONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not setCONFIG_XFRM_IPCOMP=mCONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not setCONFIG_INET=yCONFIG_IP_MULTICAST=yCONFIG_IP_ADVANCED_ROUTER=yCONFIG_IP_FIB_TRIE_STATS=yCONFIG_IP_MULTIPLE_TABLES=yCONFIG_IP_ROUTE_MULTIPATH=yCONFIG_IP_ROUTE_VERBOSE=yCONFIG_IP_ROUTE_CLASSID=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not setCONFIG_NET_IPIP=mCONFIG_NET_IPGRE_DEMUX=mCONFIG_NET_IP_TUNNEL=mCONFIG_NET_IPGRE=mCONFIG_NET_IPGRE_BROADCAST=yCONFIG_IP_MROUTE=y
# CONFIG_IP_MROUTE_MULTIPLE_TABLES is not setCONFIG_IP_PIMSM_V1=yCONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=yCONFIG_NET_IPVTI=mCONFIG_INET_AH=mCONFIG_INET_ESP=mCONFIG_INET_IPCOMP=mCONFIG_INET_XFRM_TUNNEL=mCONFIG_INET_TUNNEL=mCONFIG_INET_XFRM_MODE_TRANSPORT=mCONFIG_INET_XFRM_MODE_TUNNEL=mCONFIG_INET_XFRM_MODE_BEET=mCONFIG_INET_LRO=yCONFIG_INET_DIAG=mCONFIG_INET_TCP_DIAG=mCONFIG_INET_UDP_DIAG=mCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=mCONFIG_TCP_CONG_HSTCP=mCONFIG_TCP_CONG_HYBLA=mCONFIG_TCP_CONG_VEGAS=mCONFIG_TCP_CONG_SCALABLE=mCONFIG_TCP_CONG_LP=mCONFIG_TCP_CONG_VENO=mCONFIG_TCP_CONG_YEAH=mCONFIG_TCP_CONG_ILLINOIS=mCONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_RENO is not setCONFIG_DEFAULT_TCP_CONG="cubic"CONFIG_TCP_MD5SIG=yCONFIG_IPV6=yCONFIG_IPV6_PRIVACY=yCONFIG_IPV6_ROUTER_PREF=yCONFIG_IPV6_ROUTE_INFO=y
# CONFIG_IPV6_OPTIMISTIC_DAD is not setCONFIG_INET6_AH=mCONFIG_INET6_ESP=mCONFIG_INET6_IPCOMP=mCONFIG_IPV6_MIP6=mCONFIG_INET6_XFRM_TUNNEL=mCONFIG_INET6_TUNNEL=mCONFIG_INET6_XFRM_MODE_TRANSPORT=mCONFIG_INET6_XFRM_MODE_TUNNEL=mCONFIG_INET6_XFRM_MODE_BEET=mCONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=mCONFIG_IPV6_SIT=mCONFIG_IPV6_SIT_6RD=yCONFIG_IPV6_NDISC_NODETYPE=yCONFIG_IPV6_TUNNEL=mCONFIG_IPV6_GRE=mCONFIG_IPV6_MULTIPLE_TABLES=yCONFIG_IPV6_SUBTREES=yCONFIG_IPV6_MROUTE=yCONFIG_IPV6_MROUTE_MULTIPLE_TABLES=yCONFIG_IPV6_PIMSM_V2=yCONFIG_NETLABEL=yCONFIG_NETWORK_SECMARK=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not setCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not setCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=mCONFIG_NETFILTER_NETLINK_ACCT=mCONFIG_NETFILTER_NETLINK_QUEUE=mCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NF_CONNTRACK=mCONFIG_NF_CONNTRACK_MARK=yCONFIG_NF_CONNTRACK_SECMARK=yCONFIG_NF_CONNTRACK_ZONES=y
# CONFIG_NF_CONNTRACK_PROCFS is not setCONFIG_NF_CONNTRACK_EVENTS=yCONFIG_NF_CONNTRACK_TIMEOUT=yCONFIG_NF_CONNTRACK_TIMESTAMP=yCONFIG_NF_CONNTRACK_LABELS=yCONFIG_NF_CT_PROTO_DCCP=mCONFIG_NF_CT_PROTO_GRE=mCONFIG_NF_CT_PROTO_SCTP=mCONFIG_NF_CT_PROTO_UDPLITE=mCONFIG_NF_CONNTRACK_AMANDA=mCONFIG_NF_CONNTRACK_FTP=mCONFIG_NF_CONNTRACK_H323=mCONFIG_NF_CONNTRACK_IRC=mCONFIG_NF_CONNTRACK_BROADCAST=mCONFIG_NF_CONNTRACK_NETBIOS_NS=mCONFIG_NF_CONNTRACK_SNMP=mCONFIG_NF_CONNTRACK_PPTP=mCONFIG_NF_CONNTRACK_SANE=mCONFIG_NF_CONNTRACK_SIP=mCONFIG_NF_CONNTRACK_TFTP=mCONFIG_NF_CT_NETLINK=mCONFIG_NF_CT_NETLINK_TIMEOUT=mCONFIG_NF_CT_NETLINK_HELPER=mCONFIG_NETFILTER_NETLINK_QUEUE_CT=yCONFIG_NF_NAT=mCONFIG_NF_NAT_NEEDED=yCONFIG_NF_NAT_PROTO_DCCP=mCONFIG_NF_NAT_PROTO_UDPLITE=mCONFIG_NF_NAT_PROTO_SCTP=mCONFIG_NF_NAT_AMANDA=mCONFIG_NF_NAT_FTP=mCONFIG_NF_NAT_IRC=mCONFIG_NF_NAT_SIP=mCONFIG_NF_NAT_TFTP=mCONFIG_NETFILTER_TPROXY=mCONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#CONFIG_NETFILTER_XT_MARK=mCONFIG_NETFILTER_XT_CONNMARK=mCONFIG_NETFILTER_XT_SET=m
#
# Xtables targets
#CONFIG_NETFILTER_XT_TARGET_AUDIT=mCONFIG_NETFILTER_XT_TARGET_CHECKSUM=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=mCONFIG_NETFILTER_XT_TARGET_CONNMARK=mCONFIG_NETFILTER_XT_TARGET_CONNSECMARK=mCONFIG_NETFILTER_XT_TARGET_CT=mCONFIG_NETFILTER_XT_TARGET_DSCP=mCONFIG_NETFILTER_XT_TARGET_HL=mCONFIG_NETFILTER_XT_TARGET_HMARK=mCONFIG_NETFILTER_XT_TARGET_IDLETIMER=mCONFIG_NETFILTER_XT_TARGET_LED=mCONFIG_NETFILTER_XT_TARGET_LOG=mCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_TARGET_NETMAP=mCONFIG_NETFILTER_XT_TARGET_NFLOG=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=mCONFIG_NETFILTER_XT_TARGET_NOTRACK=mCONFIG_NETFILTER_XT_TARGET_RATEEST=mCONFIG_NETFILTER_XT_TARGET_REDIRECT=mCONFIG_NETFILTER_XT_TARGET_TEE=mCONFIG_NETFILTER_XT_TARGET_TPROXY=mCONFIG_NETFILTER_XT_TARGET_TRACE=mCONFIG_NETFILTER_XT_TARGET_SECMARK=mCONFIG_NETFILTER_XT_TARGET_TCPMSS=mCONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
#
# Xtables matches
#CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=mCONFIG_NETFILTER_XT_MATCH_BPF=mCONFIG_NETFILTER_XT_MATCH_CLUSTER=mCONFIG_NETFILTER_XT_MATCH_COMMENT=mCONFIG_NETFILTER_XT_MATCH_CONNBYTES=mCONFIG_NETFILTER_XT_MATCH_CONNLABEL=mCONFIG_NETFILTER_XT_MATCH_CONNLIMIT=mCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=mCONFIG_NETFILTER_XT_MATCH_CPU=mCONFIG_NETFILTER_XT_MATCH_DCCP=mCONFIG_NETFILTER_XT_MATCH_DEVGROUP=mCONFIG_NETFILTER_XT_MATCH_DSCP=mCONFIG_NETFILTER_XT_MATCH_ECN=mCONFIG_NETFILTER_XT_MATCH_ESP=mCONFIG_NETFILTER_XT_MATCH_HASHLIMIT=mCONFIG_NETFILTER_XT_MATCH_HELPER=mCONFIG_NETFILTER_XT_MATCH_HL=mCONFIG_NETFILTER_XT_MATCH_IPRANGE=mCONFIG_NETFILTER_XT_MATCH_IPVS=mCONFIG_NETFILTER_XT_MATCH_LENGTH=mCONFIG_NETFILTER_XT_MATCH_LIMIT=mCONFIG_NETFILTER_XT_MATCH_MAC=mCONFIG_NETFILTER_XT_MATCH_MARK=mCONFIG_NETFILTER_XT_MATCH_MULTIPORT=mCONFIG_NETFILTER_XT_MATCH_NFACCT=mCONFIG_NETFILTER_XT_MATCH_OSF=mCONFIG_NETFILTER_XT_MATCH_OWNER=mCONFIG_NETFILTER_XT_MATCH_POLICY=mCONFIG_NETFILTER_XT_MATCH_PHYSDEV=mCONFIG_NETFILTER_XT_MATCH_PKTTYPE=mCONFIG_NETFILTER_XT_MATCH_QUOTA=mCONFIG_NETFILTER_XT_MATCH_RATEEST=mCONFIG_NETFILTER_XT_MATCH_REALM=mCONFIG_NETFILTER_XT_MATCH_RECENT=mCONFIG_NETFILTER_XT_MATCH_SCTP=mCONFIG_NETFILTER_XT_MATCH_SOCKET=mCONFIG_NETFILTER_XT_MATCH_STATE=mCONFIG_NETFILTER_XT_MATCH_STATISTIC=mCONFIG_NETFILTER_XT_MATCH_STRING=mCONFIG_NETFILTER_XT_MATCH_TCPMSS=mCONFIG_NETFILTER_XT_MATCH_TIME=mCONFIG_NETFILTER_XT_MATCH_U32=mCONFIG_IP_SET=mCONFIG_IP_SET_MAX=256CONFIG_IP_SET_BITMAP_IP=mCONFIG_IP_SET_BITMAP_IPMAC=mCONFIG_IP_SET_BITMAP_PORT=mCONFIG_IP_SET_HASH_IP=mCONFIG_IP_SET_HASH_IPPORT=mCONFIG_IP_SET_HASH_IPPORTIP=mCONFIG_IP_SET_HASH_IPPORTNET=mCONFIG_IP_SET_HASH_NET=mCONFIG_IP_SET_HASH_NETPORT=mCONFIG_IP_SET_HASH_NETIFACE=mCONFIG_IP_SET_LIST_SET=mCONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not setCONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#CONFIG_IP_VS_PROTO_TCP=yCONFIG_IP_VS_PROTO_UDP=yCONFIG_IP_VS_PROTO_AH_ESP=yCONFIG_IP_VS_PROTO_ESP=yCONFIG_IP_VS_PROTO_AH=yCONFIG_IP_VS_PROTO_SCTP=y
#
# IPVS scheduler
#CONFIG_IP_VS_RR=mCONFIG_IP_VS_WRR=mCONFIG_IP_VS_LC=mCONFIG_IP_VS_WLC=mCONFIG_IP_VS_LBLC=mCONFIG_IP_VS_LBLCR=mCONFIG_IP_VS_DH=mCONFIG_IP_VS_SH=mCONFIG_IP_VS_SED=mCONFIG_IP_VS_NQ=m
#
# IPVS SH scheduler
#CONFIG_IP_VS_SH_TAB_BITS=8
#
# IPVS application helper
#CONFIG_IP_VS_FTP=mCONFIG_IP_VS_NFCT=yCONFIG_IP_VS_PE_SIP=m
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_CONNTRACK_IPV4=mCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_RPFILTER=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_NF_NAT_IPV4=mCONFIG_IP_NF_TARGET_MASQUERADE=mCONFIG_IP_NF_TARGET_NETMAP=mCONFIG_IP_NF_TARGET_REDIRECT=mCONFIG_NF_NAT_SNMP_BASIC=mCONFIG_NF_NAT_PROTO_GRE=mCONFIG_NF_NAT_PPTP=mCONFIG_NF_NAT_H323=mCONFIG_IP_NF_MANGLE=mCONFIG_IP_NF_TARGET_CLUSTERIP=mCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=mCONFIG_IP_NF_RAW=mCONFIG_IP_NF_SECURITY=mCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV6=mCONFIG_NF_CONNTRACK_IPV6=mCONFIG_IP6_NF_IPTABLES=mCONFIG_IP6_NF_MATCH_AH=mCONFIG_IP6_NF_MATCH_EUI64=mCONFIG_IP6_NF_MATCH_FRAG=mCONFIG_IP6_NF_MATCH_OPTS=mCONFIG_IP6_NF_MATCH_HL=mCONFIG_IP6_NF_MATCH_IPV6HEADER=mCONFIG_IP6_NF_MATCH_MH=mCONFIG_IP6_NF_MATCH_RPFILTER=mCONFIG_IP6_NF_MATCH_RT=mCONFIG_IP6_NF_TARGET_HL=mCONFIG_IP6_NF_FILTER=mCONFIG_IP6_NF_TARGET_REJECT=mCONFIG_IP6_NF_MANGLE=mCONFIG_IP6_NF_RAW=mCONFIG_IP6_NF_SECURITY=mCONFIG_NF_NAT_IPV6=mCONFIG_IP6_NF_TARGET_MASQUERADE=mCONFIG_IP6_NF_TARGET_NPT=m
#
# DECnet: Netfilter Configuration
#CONFIG_DECNET_NF_GRABULATOR=mCONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=mCONFIG_BRIDGE_EBT_IP6=mCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not setCONFIG_BRIDGE_EBT_NFLOG=mCONFIG_IP_DCCP=mCONFIG_INET_DCCP_DIAG=m
#
# DCCP CCIDs Configuration
#
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
# CONFIG_IP_DCCP_CCID3 is not set
#
# DCCP Kernel Hacking
#
# CONFIG_IP_DCCP_DEBUG is not setCONFIG_NET_DCCPPROBE=mCONFIG_IP_SCTP=mCONFIG_NET_SCTPPROBE=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not setCONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not setCONFIG_SCTP_COOKIE_HMAC_MD5=yCONFIG_SCTP_COOKIE_HMAC_SHA1=yCONFIG_RDS=mCONFIG_RDS_RDMA=mCONFIG_RDS_TCP=m
# CONFIG_RDS_DEBUG is not setCONFIG_TIPC=mCONFIG_TIPC_PORTS=8191CONFIG_TIPC_MEDIA_IB=yCONFIG_ATM=mCONFIG_ATM_CLIP=m
# CONFIG_ATM_CLIP_NO_ICMP is not setCONFIG_ATM_LANE=mCONFIG_ATM_MPOA=mCONFIG_ATM_BR2684=m
# CONFIG_ATM_BR2684_IPFILTER is not setCONFIG_L2TP=mCONFIG_L2TP_DEBUGFS=m
# CONFIG_L2TP_V3 is not setCONFIG_STP=mCONFIG_GARP=mCONFIG_MRP=mCONFIG_BRIDGE=mCONFIG_BRIDGE_IGMP_SNOOPING=yCONFIG_BRIDGE_VLAN_FILTERING=yCONFIG_HAVE_NET_DSA=yCONFIG_NET_DSA=mCONFIG_NET_DSA_TAG_DSA=yCONFIG_NET_DSA_TAG_EDSA=yCONFIG_NET_DSA_TAG_TRAILER=yCONFIG_VLAN_8021Q=mCONFIG_VLAN_8021Q_GVRP=yCONFIG_VLAN_8021Q_MVRP=yCONFIG_DECNET=m
# CONFIG_DECNET_ROUTER is not setCONFIG_LLC=mCONFIG_LLC2=mCONFIG_IPX=m
# CONFIG_IPX_INTERN is not setCONFIG_ATALK=mCONFIG_DEV_APPLETALK=mCONFIG_IPDDP=mCONFIG_IPDDP_ENCAP=yCONFIG_X25=mCONFIG_LAPB=mCONFIG_PHONET=mCONFIG_IEEE802154=mCONFIG_IEEE802154_6LOWPAN=mCONFIG_MAC802154=mCONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#CONFIG_NET_SCH_CBQ=mCONFIG_NET_SCH_HTB=mCONFIG_NET_SCH_HFSC=mCONFIG_NET_SCH_ATM=mCONFIG_NET_SCH_PRIO=mCONFIG_NET_SCH_MULTIQ=mCONFIG_NET_SCH_RED=mCONFIG_NET_SCH_SFB=mCONFIG_NET_SCH_SFQ=mCONFIG_NET_SCH_TEQL=mCONFIG_NET_SCH_TBF=mCONFIG_NET_SCH_GRED=mCONFIG_NET_SCH_DSMARK=mCONFIG_NET_SCH_NETEM=mCONFIG_NET_SCH_DRR=mCONFIG_NET_SCH_MQPRIO=mCONFIG_NET_SCH_CHOKE=mCONFIG_NET_SCH_QFQ=mCONFIG_NET_SCH_CODEL=mCONFIG_NET_SCH_FQ_CODEL=mCONFIG_NET_SCH_INGRESS=mCONFIG_NET_SCH_PLUG=m
#
# Classification
#CONFIG_NET_CLS=yCONFIG_NET_CLS_BASIC=mCONFIG_NET_CLS_TCINDEX=mCONFIG_NET_CLS_ROUTE4=mCONFIG_NET_CLS_FW=mCONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not setCONFIG_CLS_U32_MARK=yCONFIG_NET_CLS_RSVP=mCONFIG_NET_CLS_RSVP6=mCONFIG_NET_CLS_FLOW=mCONFIG_NET_CLS_CGROUP=mCONFIG_NET_EMATCH=yCONFIG_NET_EMATCH_STACK=32CONFIG_NET_EMATCH_CMP=mCONFIG_NET_EMATCH_NBYTE=mCONFIG_NET_EMATCH_U32=mCONFIG_NET_EMATCH_META=mCONFIG_NET_EMATCH_TEXT=mCONFIG_NET_EMATCH_CANID=mCONFIG_NET_EMATCH_IPSET=mCONFIG_NET_CLS_ACT=yCONFIG_NET_ACT_POLICE=mCONFIG_NET_ACT_GACT=mCONFIG_GACT_PROB=yCONFIG_NET_ACT_MIRRED=mCONFIG_NET_ACT_IPT=mCONFIG_NET_ACT_NAT=mCONFIG_NET_ACT_PEDIT=mCONFIG_NET_ACT_SIMP=mCONFIG_NET_ACT_SKBEDIT=mCONFIG_NET_ACT_CSUM=m
# CONFIG_NET_CLS_IND is not setCONFIG_NET_SCH_FIFO=yCONFIG_DCB=yCONFIG_DNS_RESOLVER=yCONFIG_BATMAN_ADV=mCONFIG_BATMAN_ADV_BLA=yCONFIG_BATMAN_ADV_DAT=yCONFIG_BATMAN_ADV_NC=y
# CONFIG_BATMAN_ADV_DEBUG is not setCONFIG_OPENVSWITCH=mCONFIG_VSOCKETS=mCONFIG_VMWARE_VMCI_VSOCKETS=mCONFIG_NETLINK_MMAP=yCONFIG_NETLINK_DIAG=mCONFIG_RPS=yCONFIG_RFS_ACCEL=yCONFIG_XPS=yCONFIG_NETPRIO_CGROUP=mCONFIG_BQL=yCONFIG_BPF_JIT=y
#
# Network testing
#CONFIG_NET_PKTGEN=mCONFIG_NET_TCPPROBE=m
# CONFIG_NET_DROP_MONITOR is not setCONFIG_HAMRADIO=y
#
# Packet Radio protocols
#CONFIG_AX25=mCONFIG_AX25_DAMA_SLAVE=yCONFIG_NETROM=mCONFIG_ROSE=m
#
# AX.25 network device drivers
#CONFIG_MKISS=mCONFIG_6PACK=mCONFIG_BPQETHER=mCONFIG_BAYCOM_SER_FDX=mCONFIG_BAYCOM_SER_HDX=mCONFIG_BAYCOM_PAR=mCONFIG_YAM=mCONFIG_CAN=mCONFIG_CAN_RAW=mCONFIG_CAN_BCM=mCONFIG_CAN_GW=m
#
# CAN Device Drivers
#CONFIG_CAN_VCAN=mCONFIG_CAN_SLCAN=mCONFIG_CAN_DEV=mCONFIG_CAN_CALC_BITTIMING=yCONFIG_CAN_LEDS=yCONFIG_CAN_MCP251X=mCONFIG_CAN_JANZ_ICAN3=mCONFIG_PCH_CAN=mCONFIG_CAN_SJA1000=mCONFIG_CAN_SJA1000_ISA=mCONFIG_CAN_SJA1000_PLATFORM=mCONFIG_CAN_EMS_PCMCIA=mCONFIG_CAN_EMS_PCI=mCONFIG_CAN_PEAK_PCMCIA=mCONFIG_CAN_PEAK_PCI=mCONFIG_CAN_PEAK_PCIEC=yCONFIG_CAN_KVASER_PCI=mCONFIG_CAN_PLX_PCI=mCONFIG_CAN_C_CAN=mCONFIG_CAN_C_CAN_PLATFORM=mCONFIG_CAN_C_CAN_PCI=mCONFIG_CAN_CC770=mCONFIG_CAN_CC770_ISA=mCONFIG_CAN_CC770_PLATFORM=m
#
# CAN USB interfaces
#CONFIG_CAN_EMS_USB=mCONFIG_CAN_ESD_USB2=mCONFIG_CAN_KVASER_USB=mCONFIG_CAN_PEAK_USB=mCONFIG_CAN_8DEV_USB=mCONFIG_CAN_SOFTING=mCONFIG_CAN_SOFTING_CS=m
# CONFIG_CAN_DEBUG_DEVICES is not setCONFIG_IRDA=m
#
# IrDA protocols
#CONFIG_IRLAN=mCONFIG_IRNET=mCONFIG_IRCOMM=mCONFIG_IRDA_ULTRA=y
#
# IrDA options
#CONFIG_IRDA_CACHE_LAST_LSAP=yCONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#CONFIG_IRTTY_SIR=m
#
# Dongle support
#CONFIG_DONGLE=yCONFIG_ESI_DONGLE=mCONFIG_ACTISYS_DONGLE=mCONFIG_TEKRAM_DONGLE=mCONFIG_TOIM3232_DONGLE=mCONFIG_LITELINK_DONGLE=mCONFIG_MA600_DONGLE=mCONFIG_GIRBIL_DONGLE=mCONFIG_MCP2120_DONGLE=mCONFIG_OLD_BELKIN_DONGLE=mCONFIG_ACT200L_DONGLE=mCONFIG_KINGSUN_DONGLE=mCONFIG_KSDAZZLE_DONGLE=mCONFIG_KS959_DONGLE=m
#
# FIR device drivers
#CONFIG_USB_IRDA=mCONFIG_SIGMATEL_FIR=mCONFIG_NSC_FIR=mCONFIG_WINBOND_FIR=mCONFIG_SMC_IRCC_FIR=mCONFIG_ALI_FIR=mCONFIG_VLSI_FIR=mCONFIG_VIA_FIR=mCONFIG_MCS_FIR=mCONFIG_BT=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=yCONFIG_BT_BNEP=mCONFIG_BT_BNEP_MC_FILTER=yCONFIG_BT_BNEP_PROTO_FILTER=yCONFIG_BT_CMTP=mCONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=mCONFIG_BT_HCIBTSDIO=mCONFIG_BT_HCIUART=mCONFIG_BT_HCIUART_H4=yCONFIG_BT_HCIUART_BCSP=yCONFIG_BT_HCIUART_ATH3K=yCONFIG_BT_HCIUART_LL=yCONFIG_BT_HCIUART_3WIRE=yCONFIG_BT_HCIBCM203X=mCONFIG_BT_HCIBPA10X=mCONFIG_BT_HCIBFUSB=mCONFIG_BT_HCIDTL1=mCONFIG_BT_HCIBT3C=mCONFIG_BT_HCIBLUECARD=mCONFIG_BT_HCIBTUART=mCONFIG_BT_HCIVHCI=mCONFIG_BT_MRVL=mCONFIG_BT_MRVL_SDIO=mCONFIG_BT_ATH3K=mCONFIG_BT_WILINK=mCONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not setCONFIG_RXKAD=mCONFIG_FIB_RULES=yCONFIG_WIRELESS=yCONFIG_WIRELESS_EXT=yCONFIG_WEXT_CORE=yCONFIG_WEXT_PROC=yCONFIG_WEXT_SPY=yCONFIG_WEXT_PRIV=yCONFIG_CFG80211=mCONFIG_NL80211_TESTMODE=y
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not setCONFIG_CFG80211_DEFAULT_PS=yCONFIG_CFG80211_DEBUGFS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not setCONFIG_CFG80211_WEXT=yCONFIG_LIB80211=mCONFIG_LIB80211_CRYPT_WEP=mCONFIG_LIB80211_CRYPT_CCMP=mCONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not setCONFIG_MAC80211=mCONFIG_MAC80211_HAS_RC=yCONFIG_MAC80211_RC_PID=yCONFIG_MAC80211_RC_MINSTREL=yCONFIG_MAC80211_RC_MINSTREL_HT=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not setCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel_ht"CONFIG_MAC80211_MESH=yCONFIG_MAC80211_LEDS=yCONFIG_MAC80211_DEBUGFS=yCONFIG_MAC80211_MESSAGE_TRACING=y
# CONFIG_MAC80211_DEBUG_MENU is not setCONFIG_WIMAX=mCONFIG_WIMAX_DEBUG_LEVEL=8CONFIG_RFKILL=yCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=yCONFIG_RFKILL_REGULATOR=mCONFIG_RFKILL_GPIO=mCONFIG_NET_9P=mCONFIG_NET_9P_VIRTIO=mCONFIG_NET_9P_RDMA=m
# CONFIG_NET_9P_DEBUG is not setCONFIG_CAIF=m
# CONFIG_CAIF_DEBUG is not setCONFIG_CAIF_NETDEV=mCONFIG_CAIF_USB=mCONFIG_CEPH_LIB=m
# CONFIG_CEPH_LIB_PRETTYDEBUG is not setCONFIG_CEPH_LIB_USE_DNS_RESOLVER=yCONFIG_NFC=mCONFIG_NFC_NCI=mCONFIG_NFC_HCI=mCONFIG_NFC_SHDLC=y
#
# Near Field Communication (NFC) devices
#CONFIG_NFC_PN533=mCONFIG_NFC_WILINK=mCONFIG_NFC_MEI_PHY=mCONFIG_NFC_PN544=mCONFIG_NFC_PN544_I2C=mCONFIG_NFC_PN544_MEI=mCONFIG_NFC_MICROREAD=mCONFIG_NFC_MICROREAD_I2C=mCONFIG_NFC_MICROREAD_MEI=mCONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH=""CONFIG_DEVTMPFS=yCONFIG_DEVTMPFS_MOUNT=y
# CONFIG_STANDALONE is not setCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""CONFIG_FW_LOADER_USER_HELPER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not setCONFIG_SYS_HYPERVISOR=y
# CONFIG_GENERIC_CPU_DEVICES is not setCONFIG_REGMAP=yCONFIG_REGMAP_I2C=yCONFIG_REGMAP_SPI=yCONFIG_REGMAP_MMIO=yCONFIG_REGMAP_IRQ=yCONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#CONFIG_CONNECTOR=yCONFIG_PROC_EVENTS=yCONFIG_MTD=m
# CONFIG_MTD_TESTS is not setCONFIG_MTD_REDBOOT_PARTS=mCONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not setCONFIG_MTD_CMDLINE_PARTS=mCONFIG_MTD_AR7_PARTS=m
#
# User Modules And Translation Layers
#CONFIG_MTD_BLKDEVS=mCONFIG_MTD_BLOCK=mCONFIG_MTD_BLOCK_RO=mCONFIG_FTL=mCONFIG_NFTL=mCONFIG_NFTL_RW=yCONFIG_INFTL=mCONFIG_RFD_FTL=mCONFIG_SSFDC=mCONFIG_SM_FTL=mCONFIG_MTD_OOPS=mCONFIG_MTD_SWAP=m
#
# RAM/ROM/Flash chip drivers
#CONFIG_MTD_CFI=mCONFIG_MTD_JEDECPROBE=mCONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not setCONFIG_MTD_CFI_INTELEXT=mCONFIG_MTD_CFI_AMDSTD=mCONFIG_MTD_CFI_STAA=mCONFIG_MTD_CFI_UTIL=mCONFIG_MTD_RAM=mCONFIG_MTD_ROM=mCONFIG_MTD_ABSENT=m
#
# Mapping drivers for chip access
#CONFIG_MTD_COMPLEX_MAPPINGS=yCONFIG_MTD_PHYSMAP=m
# CONFIG_MTD_PHYSMAP_COMPAT is not setCONFIG_MTD_SC520CDP=mCONFIG_MTD_NETSC520=mCONFIG_MTD_TS5500=mCONFIG_MTD_SBC_GXX=mCONFIG_MTD_AMD76XROM=mCONFIG_MTD_ICHXROM=mCONFIG_MTD_ESB2ROM=mCONFIG_MTD_CK804XROM=mCONFIG_MTD_SCB2_FLASH=m
CONFIG_MTD_NETtel=mCONFIG_MTD_L440GX=mCONFIG_MTD_PCI=mCONFIG_MTD_PCMCIA=m
# CONFIG_MTD_PCMCIA_ANONYMOUS is not setCONFIG_MTD_GPIO_ADDR=mCONFIG_MTD_INTEL_VR_NOR=mCONFIG_MTD_PLATRAM=mCONFIG_MTD_LATCH_ADDR=m
#
# Self-contained MTD device drivers
#CONFIG_MTD_PMC551=m
# CONFIG_MTD_PMC551_BUGFIX is not set
# CONFIG_MTD_PMC551_DEBUG is not setCONFIG_MTD_DATAFLASH=m
# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not setCONFIG_MTD_DATAFLASH_OTP=yCONFIG_MTD_M25P80=mCONFIG_M25PXX_USE_FAST_READ=yCONFIG_MTD_SST25L=mCONFIG_MTD_SLRAM=mCONFIG_MTD_PHRAM=mCONFIG_MTD_MTDRAM=mCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#CONFIG_MTD_DOCG3=mCONFIG_BCH_CONST_M=14CONFIG_BCH_CONST_T=4CONFIG_MTD_NAND_ECC=m
# CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND=mCONFIG_MTD_NAND_BCH=m CONFIG_MTD_NAND_ECC_BCH=y CONFIG_MTD_SM_COMMON=m CONFIG_MTD_NAND_DENALI=m CONFIG_MTD_NAND_DENALI_PCI=m CONFIG_MTD_NAND_DENALI_DT=m CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 CONFIG_MTD_NAND_IDS=mCONFIG_MTD_NAND_RICOH=m CONFIG_MTD_NAND_DISKONCHIP=m
# CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED is not set CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0
# CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE is not set CONFIG_MTD_NAND_DOCG4=m CONFIG_MTD_NAND_CAFE=m CONFIG_MTD_NAND_NANDSIM=m CONFIG_MTD_NAND_PLATFORM=m CONFIG_MTD_ALAUDA=mCONFIG_MTD_ONENAND=m CONFIG_MTD_ONENAND_VERIFY_WRITE=y CONFIG_MTD_ONENAND_GENERIC=m
# CONFIG_MTD_ONENAND_OTP is not set CONFIG_MTD_ONENAND_2X_PROGRAM=y
#
# LPDDR flash memory drivers
#CONFIG_MTD_LPDDR=mCONFIG_MTD_QINFO_PROBE=mCONFIG_MTD_UBI=mCONFIG_MTD_UBI_WL_THRESHOLD=4096CONFIG_MTD_UBI_BEB_LIMIT=20CONFIG_MTD_UBI_FASTMAP=yCONFIG_MTD_UBI_GLUEBI=mCONFIG_PARPORT=mCONFIG_PARPORT_PC=mCONFIG_PARPORT_SERIAL=mCONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not setCONFIG_PARPORT_PC_PCMCIA=m
# CONFIG_PARPORT_GSC is not setCONFIG_PARPORT_AX88796=mCONFIG_PARPORT_1284=yCONFIG_PARPORT_NOT_PC=yCONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=mCONFIG_PARIDE=m
#
# Parallel IDE high-level drivers
#CONFIG_PARIDE_PD=mCONFIG_PARIDE_PCD=mCONFIG_PARIDE_PF=mCONFIG_PARIDE_PT=mCONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#CONFIG_PARIDE_ATEN=mCONFIG_PARIDE_BPCK=mCONFIG_PARIDE_COMM=mCONFIG_PARIDE_DSTR=mCONFIG_PARIDE_FIT2=mCONFIG_PARIDE_FIT3=mCONFIG_PARIDE_EPAT=m
# CONFIG_PARIDE_EPATC8 is not setCONFIG_PARIDE_EPIA=mCONFIG_PARIDE_FRIQ=mCONFIG_PARIDE_FRPW=mCONFIG_PARIDE_KBIC=mCONFIG_PARIDE_KTTI=mCONFIG_PARIDE_ON20=mCONFIG_PARIDE_ON26=mCONFIG_BLK_DEV_PCIESSD_MTIP32XX=mCONFIG_BLK_CPQ_DA=mCONFIG_BLK_CPQ_CISS_DA=mCONFIG_CISS_SCSI_TAPE=yCONFIG_BLK_DEV_DAC960=mCONFIG_BLK_DEV_UMEM=m
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=yCONFIG_BLK_DEV_LOOP_MIN_COUNT=8CONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_DRBD=m
# CONFIG_DRBD_FAULT_INJECTION is not setCONFIG_BLK_DEV_NBD=mCONFIG_BLK_DEV_NVME=mCONFIG_BLK_DEV_OSD=mCONFIG_BLK_DEV_SX8=mCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not setCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not setCONFIG_ATA_OVER_ETH=mCONFIG_XEN_BLKDEV_FRONTEND=yCONFIG_XEN_BLKDEV_BACKEND=mCONFIG_VIRTIO_BLK=y
# CONFIG_BLK_DEV_HD is not setCONFIG_BLK_DEV_RBD=mCONFIG_BLK_DEV_RSXX=m
#
# Misc devices
#CONFIG_SENSORS_LIS3LV02D=mCONFIG_AD525X_DPOT=mCONFIG_AD525X_DPOT_I2C=mCONFIG_AD525X_DPOT_SPI=mCONFIG_ATMEL_PWM=mCONFIG_DUMMY_IRQ=mCONFIG_IBM_ASM=mCONFIG_PHANTOM=mCONFIG_INTEL_MID_PTI=mCONFIG_SGI_IOC4=mCONFIG_TIFM_CORE=mCONFIG_TIFM_7XX1=mCONFIG_ICS932S401=mCONFIG_ATMEL_SSC=mCONFIG_ENCLOSURE_SERVICES=m
# CONFIG_CS5535_MFGPT is not setCONFIG_HP_ILO=mCONFIG_APDS9802ALS=mCONFIG_ISL29003=mCONFIG_ISL29020=mCONFIG_SENSORS_TSL2550=mCONFIG_SENSORS_BH1780=mCONFIG_SENSORS_BH1770=mCONFIG_SENSORS_APDS990X=mCONFIG_HMC6352=mCONFIG_DS1682=mCONFIG_TI_DAC7512=mCONFIG_VMWARE_BALLOON=mCONFIG_BMP085=yCONFIG_BMP085_I2C=mCONFIG_BMP085_SPI=mCONFIG_PCH_PHUB=mCONFIG_USB_SWITCH_FSA9480=mCONFIG_LATTICE_ECP3_CONFIG=mCONFIG_SRAM=yCONFIG_C2PORT=mCONFIG_C2PORT_DURAMAR_2150=m
#
# EEPROM support
#CONFIG_EEPROM_AT24=mCONFIG_EEPROM_AT25=mCONFIG_EEPROM_LEGACY=mCONFIG_EEPROM_MAX6875=mCONFIG_EEPROM_93CX6=mCONFIG_EEPROM_93XX46=mCONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not setCONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline #CONFIG_TI_ST=mCONFIG_SENSORS_LIS3_I2C=m
#
# Altera FPGA firmware download module
#CONFIG_ALTERA_STAPL=mCONFIG_INTEL_MEI=yCONFIG_INTEL_MEI_ME=yCONFIG_VMWARE_VMCI=mCONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_SCSI_MOD=yCONFIG_RAID_ATTRS=mCONFIG_SCSI=yCONFIG_SCSI_DMA=yCONFIG_SCSI_TGT=mCONFIG_SCSI_NETLINK=yCONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=yCONFIG_CHR_DEV_ST=mCONFIG_CHR_DEV_OSST=mCONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_ENCLOSURE=mCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=y
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=yCONFIG_SCSI_FC_ATTRS=mCONFIG_SCSI_FC_TGT_ATTRS=yCONFIG_SCSI_ISCSI_ATTRS=mCONFIG_SCSI_SAS_ATTRS=mCONFIG_SCSI_SAS_LIBSAS=mCONFIG_SCSI_SAS_ATA=yCONFIG_SCSI_SAS_HOST_SMP=yCONFIG_SCSI_SRP_ATTRS=mCONFIG_SCSI_SRP_TGT_ATTRS=yCONFIG_SCSI_LOWLEVEL=yCONFIG_ISCSI_TCP=mCONFIG_ISCSI_BOOT_SYSFS=mCONFIG_SCSI_CXGB3_ISCSI=mCONFIG_SCSI_CXGB4_ISCSI=mCONFIG_SCSI_BNX2_ISCSI=mCONFIG_SCSI_BNX2X_FCOE=mCONFIG_BE2ISCSI=mCONFIG_BLK_DEV_3W_XXXX_RAID=mCONFIG_SCSI_HPSA=mCONFIG_SCSI_3W_9XXX=mCONFIG_SCSI_3W_SAS=mCONFIG_SCSI_ACARD=mCONFIG_SCSI_AACRAID=mCONFIG_SCSI_AIC7XXX=mCONFIG_AIC7XXX_CMDS_PER_DEVICE=8CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not setCONFIG_AIC7XXX_DEBUG_MASK=0CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not setCONFIG_SCSI_AIC79XX=mCONFIG_AIC79XX_CMDS_PER_DEVICE=32CONFIG_AIC79XX_RESET_DELAY_MS=5000
# CONFIG_AIC79XX_DEBUG_ENABLE is not setCONFIG_AIC79XX_DEBUG_MASK=0CONFIG_AIC79XX_REG_PRETTY_PRINT=yCONFIG_SCSI_AIC94XX=m
# CONFIG_AIC94XX_DEBUG is not setCONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_MVSAS_DEBUG is not set
# CONFIG_SCSI_MVSAS_TASKLET is not setCONFIG_SCSI_MVUMI=mCONFIG_SCSI_DPT_I2O=mCONFIG_SCSI_ADVANSYS=mCONFIG_SCSI_ARCMSR=mCONFIG_MEGARAID_NEWGEN=yCONFIG_MEGARAID_MM=mCONFIG_MEGARAID_MAILBOX=mCONFIG_MEGARAID_LEGACY=mCONFIG_MEGARAID_SAS=mCONFIG_SCSI_MPT2SAS=mCONFIG_SCSI_MPT2SAS_MAX_SGE=128
# CONFIG_SCSI_MPT2SAS_LOGGING is not setCONFIG_SCSI_MPT3SAS=mCONFIG_SCSI_MPT3SAS_MAX_SGE=128
# CONFIG_SCSI_MPT3SAS_LOGGING is not setCONFIG_SCSI_UFSHCD=mCONFIG_SCSI_UFSHCD_PCI=mCONFIG_SCSI_UFSHCD_PLATFORM=mCONFIG_SCSI_HPTIOP=mCONFIG_SCSI_BUSLOGIC=mCONFIG_VMWARE_PVSCSI=mCONFIG_HYPERV_STORAGE=mCONFIG_LIBFC=mCONFIG_LIBFCOE=mCONFIG_FCOE=mCONFIG_FCOE_FNIC=mCONFIG_SCSI_DMX3191D=mCONFIG_SCSI_EATA=mCONFIG_SCSI_EATA_TAGGED_QUEUE=yCONFIG_SCSI_EATA_LINKED_COMMANDS=yCONFIG_SCSI_EATA_MAX_TAGS=16CONFIG_SCSI_FUTURE_DOMAIN=mCONFIG_SCSI_GDTH=mCONFIG_SCSI_ISCI=mCONFIG_SCSI_IPS=mCONFIG_SCSI_INITIO=mCONFIG_SCSI_INIA100=mCONFIG_SCSI_PPA=mCONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not setCONFIG_SCSI_STEX=mCONFIG_SCSI_SYM53C8XX_2=mCONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64CONFIG_SCSI_SYM53C8XX_MMIO=yCONFIG_SCSI_IPR=m
# CONFIG_SCSI_IPR_TRACE is not set
# CONFIG_SCSI_IPR_DUMP is not setCONFIG_SCSI_QLOGIC_1280=mCONFIG_SCSI_QLA_FC=mCONFIG_TCM_QLA2XXX=mCONFIG_SCSI_QLA_ISCSI=mCONFIG_SCSI_LPFC=m
# CONFIG_SCSI_LPFC_DEBUG_FS is not set
CONFIG_SCSI_DC395x=mCONFIG_SCSI_DC390T=mCONFIG_SCSI_DEBUG=mCONFIG_SCSI_PMCRAID=mCONFIG_SCSI_PM8001=mCONFIG_SCSI_SRP=mCONFIG_SCSI_BFA_FC=mCONFIG_SCSI_VIRTIO=mCONFIG_SCSI_CHELSIO_FCOE=mCONFIG_SCSI_LOWLEVEL_PCMCIA=yCONFIG_PCMCIA_AHA152X=mCONFIG_PCMCIA_FDOMAIN=mCONFIG_PCMCIA_QLOGIC=mCONFIG_PCMCIA_SYM53C500=mCONFIG_SCSI_DH=mCONFIG_SCSI_DH_RDAC=mCONFIG_SCSI_DH_HP_SW=mCONFIG_SCSI_DH_EMC=mCONFIG_SCSI_DH_ALUA=mCONFIG_SCSI_OSD_INITIATOR=mCONFIG_SCSI_OSD_ULD=mCONFIG_SCSI_OSD_DPRINT_SENSE=1
# CONFIG_SCSI_OSD_DEBUG is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_VERBOSE_ERROR=yCONFIG_ATA_ACPI=yCONFIG_SATA_ZPODD=yCONFIG_SATA_PMP=y
#
# Controllers with non-SFF native interface
#CONFIG_SATA_AHCI=mCONFIG_SATA_AHCI_PLATFORM=mCONFIG_SATA_INIC162X=mCONFIG_SATA_ACARD_AHCI=mCONFIG_SATA_SIL24=mCONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#CONFIG_PDC_ADMA=mCONFIG_SATA_QSTOR=mCONFIG_SATA_SX4=mCONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#CONFIG_ATA_PIIX=y
# CONFIG_SATA_HIGHBANK is not setCONFIG_SATA_MV=mCONFIG_SATA_NV=mCONFIG_SATA_PROMISE=mCONFIG_SATA_SIL=mCONFIG_SATA_SIS=mCONFIG_SATA_SVW=mCONFIG_SATA_ULI=mCONFIG_SATA_VIA=mCONFIG_SATA_VITESSE=m
#
# PATA SFF controllers with BMDMA
#CONFIG_PATA_ALI=mCONFIG_PATA_AMD=mCONFIG_PATA_ARASAN_CF=mCONFIG_PATA_ARTOP=mCONFIG_PATA_ATIIXP=mCONFIG_PATA_ATP867X=mCONFIG_PATA_CMD64X=mCONFIG_PATA_CS5520=mCONFIG_PATA_CS5530=mCONFIG_PATA_CS5536=mCONFIG_PATA_CYPRESS=mCONFIG_PATA_EFAR=mCONFIG_PATA_HPT366=mCONFIG_PATA_HPT37X=mCONFIG_PATA_HPT3X2N=mCONFIG_PATA_HPT3X3=m
# CONFIG_PATA_HPT3X3_DMA is not setCONFIG_PATA_IT8213=mCONFIG_PATA_IT821X=mCONFIG_PATA_JMICRON=mCONFIG_PATA_MARVELL=mCONFIG_PATA_NETCELL=mCONFIG_PATA_NINJA32=mCONFIG_PATA_NS87415=mCONFIG_PATA_OLDPIIX=mCONFIG_PATA_OPTIDMA=mCONFIG_PATA_PDC2027X=mCONFIG_PATA_PDC_OLD=mCONFIG_PATA_RADISYS=mCONFIG_PATA_RDC=mCONFIG_PATA_SC1200=mCONFIG_PATA_SCH=mCONFIG_PATA_SERVERWORKS=mCONFIG_PATA_SIL680=mCONFIG_PATA_SIS=yCONFIG_PATA_TOSHIBA=mCONFIG_PATA_TRIFLEX=mCONFIG_PATA_VIA=mCONFIG_PATA_WINBOND=m
#
# PIO-only SFF controllers
#CONFIG_PATA_CMD640_PCI=mCONFIG_PATA_MPIIX=mCONFIG_PATA_NS87410=mCONFIG_PATA_OPTI=mCONFIG_PATA_PCMCIA=mCONFIG_PATA_PLATFORM=mCONFIG_PATA_RZ1000=m
#
# Generic fallback / legacy drivers
#CONFIG_PATA_ACPI=mCONFIG_ATA_GENERIC=yCONFIG_PATA_LEGACY=mCONFIG_MD=yCONFIG_BLK_DEV_MD=yCONFIG_MD_AUTODETECT=yCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=mCONFIG_MD_RAID10=mCONFIG_MD_RAID456=mCONFIG_MD_MULTIPATH=mCONFIG_MD_FAULTY=mCONFIG_BCACHE=m
# CONFIG_BCACHE_DEBUG is not set
# CONFIG_BCACHE_EDEBUG is not set
# CONFIG_BCACHE_CLOSURES_DEBUG is not setCONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not setCONFIG_DM_BUFIO=mCONFIG_DM_BIO_PRISON=mCONFIG_DM_PERSISTENT_DATA=mCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not setCONFIG_DM_CACHE=mCONFIG_DM_CACHE_MQ=mCONFIG_DM_CACHE_CLEANER=mCONFIG_DM_MIRROR=mCONFIG_DM_RAID=mCONFIG_DM_LOG_USERSPACE=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=mCONFIG_DM_MULTIPATH_QL=mCONFIG_DM_MULTIPATH_ST=mCONFIG_DM_DELAY=mCONFIG_DM_UEVENT=yCONFIG_DM_FLAKEY=mCONFIG_DM_VERITY=mCONFIG_TARGET_CORE=mCONFIG_TCM_IBLOCK=mCONFIG_TCM_FILEIO=mCONFIG_TCM_PSCSI=mCONFIG_LOOPBACK_TARGET=mCONFIG_TCM_FC=mCONFIG_ISCSI_TARGET=mCONFIG_SBP_TARGET=mCONFIG_FUSION=yCONFIG_FUSION_SPI=mCONFIG_FUSION_FC=mCONFIG_FUSION_SAS=mCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=mCONFIG_FUSION_LAN=mCONFIG_FUSION_LOGGING=y
#
# IEEE 1394 (FireWire) support
#CONFIG_FIREWIRE=mCONFIG_FIREWIRE_OHCI=mCONFIG_FIREWIRE_SBP2=mCONFIG_FIREWIRE_NET=mCONFIG_FIREWIRE_NOSY=mCONFIG_I2O=mCONFIG_I2O_LCT_NOTIFY_ON_CHANGES=yCONFIG_I2O_EXT_ADAPTEC=yCONFIG_I2O_EXT_ADAPTEC_DMA64=yCONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not setCONFIG_I2O_BUS=mCONFIG_I2O_BLOCK=mCONFIG_I2O_SCSI=mCONFIG_I2O_PROC=mCONFIG_MACINTOSH_DRIVERS=yCONFIG_MAC_EMUMOUSEBTN=mCONFIG_NETDEVICES=yCONFIG_NET_CORE=yCONFIG_BONDING=mCONFIG_DUMMY=mCONFIG_EQUALIZER=mCONFIG_NET_FC=yCONFIG_MII=yCONFIG_IFB=m
# CONFIG_NET_TEAM is not setCONFIG_MACVLAN=mCONFIG_MACVTAP=mCONFIG_VXLAN=mCONFIG_NETCONSOLE=mCONFIG_NETCONSOLE_DYNAMIC=yCONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not setCONFIG_NET_POLL_CONTROLLER=yCONFIG_NTB_NETDEV=mCONFIG_RIONET=mCONFIG_RIONET_TX_SIZE=128CONFIG_RIONET_RX_SIZE=128CONFIG_TUN=yCONFIG_VETH=mCONFIG_VIRTIO_NET=yCONFIG_SUNGEM_PHY=mCONFIG_ARCNET=mCONFIG_ARCNET_1201=mCONFIG_ARCNET_1051=mCONFIG_ARCNET_RAW=mCONFIG_ARCNET_CAP=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=mCONFIG_ARCNET_RIM_I=mCONFIG_ARCNET_COM20020=mCONFIG_ARCNET_COM20020_PCI=mCONFIG_ARCNET_COM20020_CS=mCONFIG_ATM_DRIVERS=yCONFIG_ATM_DUMMY=mCONFIG_ATM_TCP=mCONFIG_ATM_LANAI=mCONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not setCONFIG_ATM_FIRESTREAM=mCONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not setCONFIG_ATM_NICSTAR=m
# CONFIG_ATM_NICSTAR_USE_SUNI is not set
# CONFIG_ATM_NICSTAR_USE_IDT77105 is not setCONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
# CONFIG_ATM_IDT77252_RCV_ALL is not setCONFIG_ATM_IDT77252_USE_SUNI=yCONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not setCONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not setCONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not setCONFIG_ATM_FORE200E=m
# CONFIG_ATM_FORE200E_USE_TASKLET is not setCONFIG_ATM_FORE200E_TX_RETRY=16CONFIG_ATM_FORE200E_DEBUG=0CONFIG_ATM_HE=mCONFIG_ATM_HE_USE_SUNI=yCONFIG_ATM_SOLOS=m
#
# CAIF transport drivers
#CONFIG_CAIF_TTY=mCONFIG_CAIF_SPI_SLAVE=m
# CONFIG_CAIF_SPI_SYNC is not setCONFIG_CAIF_HSI=mCONFIG_CAIF_VIRTIO=mCONFIG_VHOST_NET=mCONFIG_VHOST_SCSI=mCONFIG_VHOST_RING=m
#
# Distributed Switch Architecture drivers
#CONFIG_NET_DSA_MV88E6XXX=mCONFIG_NET_DSA_MV88E6060=mCONFIG_NET_DSA_MV88E6XXX_NEED_PPU=yCONFIG_NET_DSA_MV88E6131=mCONFIG_NET_DSA_MV88E6123_61_65=mCONFIG_ETHERNET=yCONFIG_MDIO=mCONFIG_NET_VENDOR_3COM=yCONFIG_PCMCIA_3C574=mCONFIG_PCMCIA_3C589=mCONFIG_VORTEX=mCONFIG_TYPHOON=mCONFIG_NET_VENDOR_ADAPTEC=yCONFIG_ADAPTEC_STARFIRE=mCONFIG_NET_VENDOR_ALTEON=yCONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not setCONFIG_NET_VENDOR_AMD=yCONFIG_AMD8111_ETH=mCONFIG_PCNET32=mCONFIG_PCMCIA_NMCLAN=mCONFIG_NET_VENDOR_ATHEROS=yCONFIG_ATL2=mCONFIG_ATL1=mCONFIG_ATL1E=mCONFIG_ATL1C=mCONFIG_NET_CADENCE=yCONFIG_ARM_AT91_ETHER=mCONFIG_MACB=mCONFIG_NET_VENDOR_BROADCOM=yCONFIG_B44=mCONFIG_B44_PCI_AUTOSELECT=yCONFIG_B44_PCICORE_AUTOSELECT=yCONFIG_B44_PCI=yCONFIG_BNX2=mCONFIG_CNIC=mCONFIG_TIGON3=mCONFIG_BNX2X=mCONFIG_BNX2X_SRIOV=yCONFIG_NET_VENDOR_BROCADE=yCONFIG_BNA=mCONFIG_NET_CALXEDA_XGMAC=mCONFIG_NET_VENDOR_CHELSIO=yCONFIG_CHELSIO_T1=mCONFIG_CHELSIO_T1_1G=yCONFIG_CHELSIO_T3=mCONFIG_CHELSIO_T4=mCONFIG_CHELSIO_T4VF=mCONFIG_NET_VENDOR_CISCO=yCONFIG_ENIC=mCONFIG_DNET=mCONFIG_NET_VENDOR_DEC=yCONFIG_NET_TULIP=yCONFIG_DE2104X=mCONFIG_DE2104X_DSL=0CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not setCONFIG_DE4X5=mCONFIG_WINBOND_840=mCONFIG_DM9102=mCONFIG_ULI526X=mCONFIG_PCMCIA_XIRCOM=mCONFIG_NET_VENDOR_DLINK=yCONFIG_DL2K=mCONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not setCONFIG_NET_VENDOR_EMULEX=yCONFIG_BE2NET=mCONFIG_NET_VENDOR_EXAR=yCONFIG_S2IO=mCONFIG_VXGE=m
# CONFIG_VXGE_DEBUG_TRACE_ALL is not setCONFIG_NET_VENDOR_FUJITSU=yCONFIG_PCMCIA_FMVJ18X=mCONFIG_NET_VENDOR_HP=yCONFIG_HP100=mCONFIG_NET_VENDOR_INTEL=yCONFIG_E100=mCONFIG_E1000=mCONFIG_E1000E=mCONFIG_IGB=mCONFIG_IGB_HWMON=yCONFIG_IGB_DCA=yCONFIG_IGBVF=mCONFIG_IXGB=mCONFIG_IXGBE=mCONFIG_IXGBE_HWMON=yCONFIG_IXGBE_DCA=yCONFIG_IXGBE_DCB=yCONFIG_IXGBEVF=mCONFIG_NET_VENDOR_I825XX=yCONFIG_IP1000=mCONFIG_JME=mCONFIG_NET_VENDOR_MARVELL=yCONFIG_MVMDIO=mCONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not setCONFIG_SKGE_GENESIS=yCONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not setCONFIG_NET_VENDOR_MELLANOX=yCONFIG_MLX4_EN=mCONFIG_MLX4_EN_DCB=yCONFIG_MLX4_CORE=m
# CONFIG_MLX4_DEBUG is not setCONFIG_NET_VENDOR_MICREL=yCONFIG_KS8842=mCONFIG_KS8851=mCONFIG_KS8851_MLL=mCONFIG_KSZ884X_PCI=mCONFIG_NET_VENDOR_MICROCHIP=yCONFIG_ENC28J60=m
# CONFIG_ENC28J60_WRITEVERIFY is not setCONFIG_NET_VENDOR_MYRI=yCONFIG_MYRI10GE=mCONFIG_MYRI10GE_DCA=yCONFIG_FEALNX=mCONFIG_NET_VENDOR_NATSEMI=yCONFIG_NATSEMI=mCONFIG_NS83820=mCONFIG_NET_VENDOR_8390=yCONFIG_PCMCIA_AXNET=mCONFIG_NE2K_PCI=mCONFIG_PCMCIA_PCNET=mCONFIG_NET_VENDOR_NVIDIA=yCONFIG_FORCEDETH=mCONFIG_NET_VENDOR_OKI=yCONFIG_PCH_GBE=mCONFIG_ETHOC=mCONFIG_NET_PACKET_ENGINE=yCONFIG_HAMACHI=mCONFIG_YELLOWFIN=mCONFIG_NET_VENDOR_QLOGIC=yCONFIG_QLA3XXX=mCONFIG_QLCNIC=mCONFIG_QLCNIC_SRIOV=yCONFIG_QLGE=mCONFIG_NETXEN_NIC=mCONFIG_NET_VENDOR_REALTEK=yCONFIG_ATP=mCONFIG_8139CP=mCONFIG_8139TOO=mCONFIG_8139TOO_PIO=y
# CONFIG_8139TOO_TUNE_TWISTER is not setCONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not setCONFIG_R8169=mCONFIG_NET_VENDOR_RDC=yCONFIG_R6040=mCONFIG_NET_VENDOR_SEEQ=yCONFIG_NET_VENDOR_SILAN=yCONFIG_SC92031=mCONFIG_NET_VENDOR_SIS=yCONFIG_SIS900=mCONFIG_SIS190=mCONFIG_SFC=mCONFIG_SFC_MTD=yCONFIG_SFC_MCDI_MON=yCONFIG_SFC_SRIOV=yCONFIG_NET_VENDOR_SMSC=yCONFIG_PCMCIA_SMC91C92=mCONFIG_EPIC100=mCONFIG_SMSC9420=mCONFIG_NET_VENDOR_STMICRO=yCONFIG_STMMAC_ETH=mCONFIG_STMMAC_PLATFORM=y
# CONFIG_STMMAC_PCI is not set
# CONFIG_STMMAC_DEBUG_FS is not set
# CONFIG_STMMAC_DA is not setCONFIG_NET_VENDOR_SUN=yCONFIG_HAPPYMEAL=mCONFIG_SUNGEM=mCONFIG_CASSINI=mCONFIG_NIU=mCONFIG_NET_VENDOR_TEHUTI=yCONFIG_TEHUTI=mCONFIG_NET_VENDOR_TI=yCONFIG_TLAN=mCONFIG_NET_VENDOR_VIA=yCONFIG_VIA_RHINE=mCONFIG_VIA_RHINE_MMIO=yCONFIG_VIA_VELOCITY=mCONFIG_NET_VENDOR_WIZNET=yCONFIG_WIZNET_W5100=mCONFIG_WIZNET_W5300=m
# CONFIG_WIZNET_BUS_DIRECT is not set
# CONFIG_WIZNET_BUS_INDIRECT is not setCONFIG_WIZNET_BUS_ANY=yCONFIG_NET_VENDOR_XIRCOM=yCONFIG_PCMCIA_XIRC2PS=mCONFIG_FDDI=yCONFIG_DEFXX=m
# CONFIG_DEFXX_MMIO is not setCONFIG_SKFP=m
# CONFIG_HIPPI is not setCONFIG_NET_SB1000=mCONFIG_PHYLIB=y
#
# MII PHY device drivers
#CONFIG_AT803X_PHY=yCONFIG_AMD_PHY=yCONFIG_MARVELL_PHY=yCONFIG_DAVICOM_PHY=yCONFIG_QSEMI_PHY=yCONFIG_LXT_PHY=yCONFIG_CICADA_PHY=yCONFIG_VITESSE_PHY=yCONFIG_SMSC_PHY=yCONFIG_BROADCOM_PHY=yCONFIG_BCM87XX_PHY=yCONFIG_ICPLUS_PHY=yCONFIG_REALTEK_PHY=yCONFIG_NATIONAL_PHY=yCONFIG_STE10XP=yCONFIG_LSI_ET1011C_PHY=yCONFIG_MICREL_PHY=yCONFIG_FIXED_PHY=yCONFIG_MDIO_BITBANG=yCONFIG_MDIO_GPIO=yCONFIG_MICREL_KS8995MA=mCONFIG_PLIP=mCONFIG_PPP=yCONFIG_PPP_BSDCOMP=mCONFIG_PPP_DEFLATE=mCONFIG_PPP_FILTER=yCONFIG_PPP_MPPE=mCONFIG_PPP_MULTILINK=yCONFIG_PPPOATM=mCONFIG_PPPOE=mCONFIG_PPTP=mCONFIG_PPPOL2TP=mCONFIG_PPP_ASYNC=mCONFIG_PPP_SYNC_TTY=mCONFIG_SLIP=mCONFIG_SLHC=yCONFIG_SLIP_COMPRESSED=yCONFIG_SLIP_SMART=yCONFIG_SLIP_MODE_SLIP6=y
#
# USB Network Adapters
#CONFIG_USB_CATC=mCONFIG_USB_KAWETH=mCONFIG_USB_PEGASUS=mCONFIG_USB_RTL8150=mCONFIG_USB_RTL8152=mCONFIG_USB_USBNET=mCONFIG_USB_NET_AX8817X=mCONFIG_USB_NET_AX88179_178A=mCONFIG_USB_NET_CDCETHER=mCONFIG_USB_NET_CDC_EEM=mCONFIG_USB_NET_CDC_NCM=mCONFIG_USB_NET_CDC_MBIM=mCONFIG_USB_NET_DM9601=mCONFIG_USB_NET_SMSC75XX=mCONFIG_USB_NET_SMSC95XX=mCONFIG_USB_NET_GL620A=mCONFIG_USB_NET_NET1080=mCONFIG_USB_NET_PLUSB=mCONFIG_USB_NET_MCS7830=mCONFIG_USB_NET_RNDIS_HOST=mCONFIG_USB_NET_CDC_SUBSET=mCONFIG_USB_ALI_M5632=yCONFIG_USB_AN2720=yCONFIG_USB_BELKIN=yCONFIG_USB_ARMLINUX=yCONFIG_USB_EPSON2888=yCONFIG_USB_KC2190=yCONFIG_USB_NET_ZAURUS=mCONFIG_USB_NET_CX82310_ETH=mCONFIG_USB_NET_KALMIA=mCONFIG_USB_NET_QMI_WWAN=mCONFIG_USB_HSO=mCONFIG_USB_NET_INT51X1=mCONFIG_USB_CDC_PHONET=mCONFIG_USB_IPHETH=mCONFIG_USB_SIERRA_NET=mCONFIG_USB_VL600=mCONFIG_WLAN=yCONFIG_PCMCIA_RAYCS=mCONFIG_LIBERTAS_THINFIRM=m
# CONFIG_LIBERTAS_THINFIRM_DEBUG is not setCONFIG_LIBERTAS_THINFIRM_USB=mCONFIG_AIRO=mCONFIG_ATMEL=mCONFIG_PCI_ATMEL=mCONFIG_PCMCIA_ATMEL=mCONFIG_AT76C50X_USB=mCONFIG_AIRO_CS=mCONFIG_PCMCIA_WL3501=m
# CONFIG_PRISM54 is not setCONFIG_USB_ZD1201=mCONFIG_USB_NET_RNDIS_WLAN=mCONFIG_RTL8180=mCONFIG_RTL8187=mCONFIG_RTL8187_LEDS=yCONFIG_ADM8211=mCONFIG_MAC80211_HWSIM=mCONFIG_MWL8K=mCONFIG_ATH_COMMON=mCONFIG_ATH_CARDS=m
# CONFIG_ATH_DEBUG is not setCONFIG_ATH5K=m
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH5K_TRACER is not setCONFIG_ATH5K_PCI=yCONFIG_ATH9K_HW=mCONFIG_ATH9K_COMMON=mCONFIG_ATH9K_BTCOEX_SUPPORT=yCONFIG_ATH9K=mCONFIG_ATH9K_PCI=yCONFIG_ATH9K_AHB=yCONFIG_ATH9K_DEBUGFS=y
# CONFIG_ATH9K_MAC_DEBUG is not setCONFIG_ATH9K_LEGACY_RATE_CONTROL=yCONFIG_ATH9K_HTC=mCONFIG_ATH9K_HTC_DEBUGFS=yCONFIG_CARL9170=mCONFIG_CARL9170_LEDS=y
# CONFIG_CARL9170_DEBUGFS is not setCONFIG_CARL9170_WPC=yCONFIG_CARL9170_HWRNG=yCONFIG_ATH6KL=mCONFIG_ATH6KL_SDIO=mCONFIG_ATH6KL_USB=m
# CONFIG_ATH6KL_DEBUG is not set
# CONFIG_ATH6KL_TRACING is not setCONFIG_AR5523=mCONFIG_WIL6210=mCONFIG_WIL6210_ISR_COR=yCONFIG_B43=mCONFIG_B43_BCMA=y
# CONFIG_B43_BCMA_EXTRA is not setCONFIG_B43_SSB=yCONFIG_B43_PCI_AUTOSELECT=yCONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
# CONFIG_B43_SDIO is not setCONFIG_B43_BCMA_PIO=yCONFIG_B43_PIO=yCONFIG_B43_PHY_N=yCONFIG_B43_PHY_LP=yCONFIG_B43_PHY_HT=yCONFIG_B43_LEDS=yCONFIG_B43_HWRNG=y
# CONFIG_B43_DEBUG is not setCONFIG_B43LEGACY=mCONFIG_B43LEGACY_PCI_AUTOSELECT=yCONFIG_B43LEGACY_PCICORE_AUTOSELECT=yCONFIG_B43LEGACY_LEDS=yCONFIG_B43LEGACY_HWRNG=y
# CONFIG_B43LEGACY_DEBUG is not setCONFIG_B43LEGACY_DMA=yCONFIG_B43LEGACY_PIO=yCONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not setCONFIG_BRCMUTIL=mCONFIG_BRCMSMAC=mCONFIG_BRCMFMAC=mCONFIG_BRCMFMAC_SDIO=yCONFIG_BRCMFMAC_USB=yCONFIG_BRCM_TRACING=y
# CONFIG_BRCMDBG is not setCONFIG_HOSTAP=mCONFIG_HOSTAP_FIRMWARE=yCONFIG_HOSTAP_FIRMWARE_NVRAM=yCONFIG_HOSTAP_PLX=mCONFIG_HOSTAP_PCI=mCONFIG_HOSTAP_CS=mCONFIG_IPW2100=mCONFIG_IPW2100_MONITOR=y
# CONFIG_IPW2100_DEBUG is not setCONFIG_IPW2200=mCONFIG_IPW2200_MONITOR=yCONFIG_IPW2200_RADIOTAP=yCONFIG_IPW2200_PROMISCUOUS=yCONFIG_IPW2200_QOS=y
# CONFIG_IPW2200_DEBUG is not setCONFIG_LIBIPW=m
# CONFIG_LIBIPW_DEBUG is not setCONFIG_IWLWIFI=mCONFIG_IWLDVM=mCONFIG_IWLMVM=mCONFIG_IWLWIFI_OPMODE_MODULAR=y
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not setCONFIG_IWLWIFI_DEBUGFS=yCONFIG_IWLWIFI_DEVICE_TRACING=yCONFIG_IWLWIFI_DEVICE_TESTMODE=y
# CONFIG_IWLWIFI_P2P is not setCONFIG_IWLEGACY=mCONFIG_IWL4965=mCONFIG_IWL3945=m
#
# iwl3945 / iwl4965 Debugging Options # # CONFIG_IWLEGACY_DEBUG is not set CONFIG_IWLEGACY_DEBUGFS=y CONFIG_LIBERTAS=m CONFIG_LIBERTAS_USB=m CONFIG_LIBERTAS_CS=m CONFIG_LIBERTAS_SDIO=m CONFIG_LIBERTAS_SPI=m # CONFIG_LIBERTAS_DEBUG is not set CONFIG_LIBERTAS_MESH=y CONFIG_HERMES=m # CONFIG_HERMES_PRISM is not set CONFIG_HERMES_CACHE_FW_ON_INIT=y CONFIG_PLX_HERMES=m CONFIG_TMD_HERMES=m CONFIG_NORTEL_HERMES=m CONFIG_PCMCIA_HERMES=m CONFIG_PCMCIA_SPECTRUM=m CONFIG_ORINOCO_USB=m CONFIG_P54_COMMON=m CONFIG_P54_USB=m CONFIG_P54_PCI=m CONFIG_P54_SPI=m # CONFIG_P54_SPI_DEFAULT_EEPROM is not set CONFIG_P54_LEDS=y CONFIG_RT2X00=m CONFIG_RT2400PCI=m CONFIG_RT2500PCI=m CONFIG_RT61PCI=m CONFIG_RT2800PCI=m CONFIG_RT2800PCI_RT33XX=y CONFIG_RT2800PCI_RT35XX=y CONFIG_RT2800PCI_RT53XX=y CONFIG_RT2800PCI_RT3290=y CONFIG_RT2500USB=m CONFIG_RT73USB=m CONFIG_RT2800USB=m CONFIG_RT2800USB_RT33XX=y CONFIG_RT2800USB_RT35XX=y CONFIG_RT2800USB_RT53XX=y CONFIG_RT2800USB_RT55XX=y CONFIG_RT2800USB_UNKNOWN=y CONFIG_RT2800_LIB=m CONFIG_RT2X00_LIB_MMIO=m CONFIG_RT2X00_LIB_PCI=m CONFIG_RT2X00_LIB_USB=m CONFIG_RT2X00_LIB=m CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_LIB_DEBUGFS is not set # CONFIG_RT2X00_DEBUG is not set CONFIG_RTLWIFI=m # CONFIG_RTLWIFI_DEBUG is not set CONFIG_RTL8192CE=m CONFIG_RTL8192SE=m CONFIG_RTL8192DE=m CONFIG_RTL8723AE=m CONFIG_RTL8188EE=m CONFIG_RTL8192CU=m CONFIG_RTL8192C_COMMON=m CONFIG_WL_TI=y CONFIG_WL1251=m CONFIG_WL1251_SPI=m CONFIG_WL1251_SDIO=m CONFIG_WL12XX=m CONFIG_WL18XX=m CONFIG_WLCORE=m CONFIG_WLCORE_SPI=m CONFIG_WLCORE_SDIO=m CONFIG_WILINK_PLATFORM_DATA=y CONFIG_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG is not set CONFIG_MWIFIEX=m CONFIG_MWIFIEX_SDIO=m CONFIG_MWIFIEX_PCIE=m CONFIG_MWIFIEX_USB=m
#
# WiMAX Wireless Broadband devices
#CONFIG_WIMAX_I2400M=mCONFIG_WIMAX_I2400M_USB=mCONFIG_WIMAX_I2400M_DEBUG_LEVEL=8CONFIG_WAN=yCONFIG_LANMEDIA=mCONFIG_HDLC=mCONFIG_HDLC_RAW=mCONFIG_HDLC_RAW_ETH=mCONFIG_HDLC_CISCO=mCONFIG_HDLC_FR=mCONFIG_HDLC_PPP=mCONFIG_HDLC_X25=mCONFIG_PCI200SYN=mCONFIG_WANXL=mCONFIG_PC300TOO=mCONFIG_FARSYNC=mCONFIG_DSCC4=mCONFIG_DSCC4_PCISYNC=yCONFIG_DSCC4_PCI_RST=yCONFIG_DLCI=mCONFIG_DLCI_MAX=8CONFIG_LAPBETHER=mCONFIG_X25_ASY=mCONFIG_SBNI=m
# CONFIG_SBNI_MULTILINE is not setCONFIG_IEEE802154_DRIVERS=m
# CONFIG_IEEE802154_FAKEHARD is not setCONFIG_IEEE802154_FAKELB=mCONFIG_IEEE802154_AT86RF230=mCONFIG_IEEE802154_MRF24J40=mCONFIG_XEN_NETDEV_FRONTEND=yCONFIG_XEN_NETDEV_BACKEND=mCONFIG_VMXNET3=mCONFIG_HYPERV_NET=mCONFIG_ISDN=yCONFIG_ISDN_I4L=mCONFIG_ISDN_PPP=yCONFIG_ISDN_PPP_VJ=yCONFIG_ISDN_MPP=yCONFIG_IPPP_FILTER=yCONFIG_ISDN_PPP_BSDCOMP=mCONFIG_ISDN_AUDIO=yCONFIG_ISDN_TTY_FAX=yCONFIG_ISDN_X25=y
#
# ISDN feature submodules
#CONFIG_ISDN_DIVERSION=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#CONFIG_HISAX_EURO=yCONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not setCONFIG_HISAX_1TR6=yCONFIG_HISAX_NI1=yCONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#CONFIG_HISAX_16_3=yCONFIG_HISAX_TELESPCI=yCONFIG_HISAX_S0BOX=yCONFIG_HISAX_FRITZPCI=yCONFIG_HISAX_AVM_A1_PCMCIA=yCONFIG_HISAX_ELSA=yCONFIG_HISAX_DIEHLDIVA=yCONFIG_HISAX_SEDLBAUER=yCONFIG_HISAX_NETJET=yCONFIG_HISAX_NETJET_U=yCONFIG_HISAX_NICCY=yCONFIG_HISAX_BKM_A4T=yCONFIG_HISAX_SCT_QUADRO=yCONFIG_HISAX_GAZEL=yCONFIG_HISAX_HFC_PCI=yCONFIG_HISAX_W6692=yCONFIG_HISAX_HFC_SX=yCONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
#
# HiSax PCMCIA card service modules
#CONFIG_HISAX_SEDLBAUER_CS=mCONFIG_HISAX_ELSA_CS=mCONFIG_HISAX_AVM_A1_CS=mCONFIG_HISAX_TELES_CS=m
#
# HiSax sub driver modules
#CONFIG_HISAX_ST5481=mCONFIG_HISAX_HFCUSB=mCONFIG_HISAX_HFC4S8S=mCONFIG_HISAX_FRITZ_PCIPNP=m
#
# Active cards
#CONFIG_ISDN_CAPI=mCONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=yCONFIG_CAPI_TRACE=yCONFIG_ISDN_CAPI_MIDDLEWARE=yCONFIG_ISDN_CAPI_CAPI20=mCONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#CONFIG_CAPI_AVM=yCONFIG_ISDN_DRV_AVMB1_B1PCI=mCONFIG_ISDN_DRV_AVMB1_B1PCIV4=yCONFIG_ISDN_DRV_AVMB1_B1PCMCIA=mCONFIG_ISDN_DRV_AVMB1_AVM_CS=mCONFIG_ISDN_DRV_AVMB1_T1PCI=mCONFIG_ISDN_DRV_AVMB1_C4=mCONFIG_CAPI_EICON=yCONFIG_ISDN_DIVAS=mCONFIG_ISDN_DIVAS_BRIPCI=yCONFIG_ISDN_DIVAS_PRIPCI=yCONFIG_ISDN_DIVAS_DIVACAPI=mCONFIG_ISDN_DIVAS_USERIDI=mCONFIG_ISDN_DIVAS_MAINT=mCONFIG_ISDN_DRV_GIGASET=m
# CONFIG_GIGASET_CAPI is not setCONFIG_GIGASET_I4L=y
# CONFIG_GIGASET_DUMMYLL is not setCONFIG_GIGASET_BASE=mCONFIG_GIGASET_M105=mCONFIG_GIGASET_M101=m
# CONFIG_GIGASET_DEBUG is not setCONFIG_HYSDN=mCONFIG_HYSDN_CAPI=yCONFIG_MISDN=mCONFIG_MISDN_DSP=mCONFIG_MISDN_L1OIP=m
#
# mISDN hardware drivers
#CONFIG_MISDN_HFCPCI=mCONFIG_MISDN_HFCMULTI=mCONFIG_MISDN_HFCUSB=mCONFIG_MISDN_AVMFRITZ=mCONFIG_MISDN_SPEEDFAX=mCONFIG_MISDN_INFINEON=mCONFIG_MISDN_W6692=mCONFIG_MISDN_NETJET=mCONFIG_MISDN_IPAC=mCONFIG_MISDN_ISAR=mCONFIG_ISDN_HDLC=m
#
# Input device support
#CONFIG_INPUT=yCONFIG_INPUT_FF_MEMLESS=mCONFIG_INPUT_POLLDEV=mCONFIG_INPUT_SPARSEKMAP=mCONFIG_INPUT_MATRIXKMAP=m
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=yCONFIG_INPUT_MOUSEDEV_PSAUX=yCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768CONFIG_INPUT_JOYDEV=mCONFIG_INPUT_EVDEV=yCONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ADP5520=mCONFIG_KEYBOARD_ADP5588=mCONFIG_KEYBOARD_ADP5589=mCONFIG_KEYBOARD_ATKBD=yCONFIG_KEYBOARD_QT1070=mCONFIG_KEYBOARD_QT2160=mCONFIG_KEYBOARD_LKKBD=mCONFIG_KEYBOARD_GPIO=mCONFIG_KEYBOARD_GPIO_POLLED=mCONFIG_KEYBOARD_TCA6416=mCONFIG_KEYBOARD_TCA8418=mCONFIG_KEYBOARD_MATRIX=mCONFIG_KEYBOARD_LM8323=mCONFIG_KEYBOARD_LM8333=mCONFIG_KEYBOARD_MAX7359=mCONFIG_KEYBOARD_MCS=mCONFIG_KEYBOARD_MPR121=mCONFIG_KEYBOARD_NEWTON=mCONFIG_KEYBOARD_OPENCORES=mCONFIG_KEYBOARD_SAMSUNG=mCONFIG_KEYBOARD_STOWAWAY=mCONFIG_KEYBOARD_SUNKBD=mCONFIG_KEYBOARD_STMPE=mCONFIG_KEYBOARD_TC3589X=mCONFIG_KEYBOARD_XTKBD=mCONFIG_KEYBOARD_CROS_EC=mCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=mCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_CYPRESS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=yCONFIG_MOUSE_PS2_ELANTECH=yCONFIG_MOUSE_PS2_SENTELIC=yCONFIG_MOUSE_PS2_TOUCHKIT=yCONFIG_MOUSE_SERIAL=mCONFIG_MOUSE_APPLETOUCH=mCONFIG_MOUSE_BCM5974=mCONFIG_MOUSE_CYAPA=mCONFIG_MOUSE_VSXXXAA=mCONFIG_MOUSE_GPIO=mCONFIG_MOUSE_SYNAPTICS_I2C=mCONFIG_MOUSE_SYNAPTICS_USB=mCONFIG_INPUT_JOYSTICK=yCONFIG_JOYSTICK_ANALOG=mCONFIG_JOYSTICK_A3D=mCONFIG_JOYSTICK_ADI=mCONFIG_JOYSTICK_COBRA=mCONFIG_JOYSTICK_GF2K=mCONFIG_JOYSTICK_GRIP=mCONFIG_JOYSTICK_GRIP_MP=mCONFIG_JOYSTICK_GUILLEMOT=mCONFIG_JOYSTICK_INTERACT=mCONFIG_JOYSTICK_SIDEWINDER=mCONFIG_JOYSTICK_TMDC=mCONFIG_JOYSTICK_IFORCE=mCONFIG_JOYSTICK_IFORCE_USB=yCONFIG_JOYSTICK_IFORCE_232=yCONFIG_JOYSTICK_WARRIOR=mCONFIG_JOYSTICK_MAGELLAN=mCONFIG_JOYSTICK_SPACEORB=mCONFIG_JOYSTICK_SPACEBALL=mCONFIG_JOYSTICK_STINGER=mCONFIG_JOYSTICK_TWIDJOY=mCONFIG_JOYSTICK_ZHENHUA=mCONFIG_JOYSTICK_DB9=mCONFIG_JOYSTICK_GAMECON=mCONFIG_JOYSTICK_TURBOGRAFX=mCONFIG_JOYSTICK_AS5011=mCONFIG_JOYSTICK_JOYDUMP=mCONFIG_JOYSTICK_XPAD=mCONFIG_JOYSTICK_XPAD_FF=yCONFIG_JOYSTICK_XPAD_LEDS=yCONFIG_JOYSTICK_WALKERA0701=mCONFIG_INPUT_TABLET=yCONFIG_TABLET_USB_ACECAD=mCONFIG_TABLET_USB_AIPTEK=mCONFIG_TABLET_USB_GTCO=mCONFIG_TABLET_USB_HANWANG=mCONFIG_TABLET_USB_KBTAB=mCONFIG_TABLET_USB_WACOM=mCONFIG_INPUT_TOUCHSCREEN=yCONFIG_TOUCHSCREEN_88PM860X=mCONFIG_TOUCHSCREEN_ADS7846=mCONFIG_TOUCHSCREEN_AD7877=mCONFIG_TOUCHSCREEN_AD7879=mCONFIG_TOUCHSCREEN_AD7879_I2C=mCONFIG_TOUCHSCREEN_AD7879_SPI=mCONFIG_TOUCHSCREEN_ATMEL_MXT=mCONFIG_TOUCHSCREEN_AUO_PIXCIR=mCONFIG_TOUCHSCREEN_BU21013=mCONFIG_TOUCHSCREEN_CY8CTMG110=mCONFIG_TOUCHSCREEN_CYTTSP_CORE=mCONFIG_TOUCHSCREEN_CYTTSP_I2C=mCONFIG_TOUCHSCREEN_CYTTSP_SPI=mCONFIG_TOUCHSCREEN_DA9034=mCONFIG_TOUCHSCREEN_DA9052=mCONFIG_TOUCHSCREEN_DYNAPRO=mCONFIG_TOUCHSCREEN_HAMPSHIRE=mCONFIG_TOUCHSCREEN_EETI=mCONFIG_TOUCHSCREEN_FUJITSU=mCONFIG_TOUCHSCREEN_ILI210X=mCONFIG_TOUCHSCREEN_GUNZE=mCONFIG_TOUCHSCREEN_ELO=mCONFIG_TOUCHSCREEN_WACOM_W8001=mCONFIG_TOUCHSCREEN_WACOM_I2C=mCONFIG_TOUCHSCREEN_MAX11801=mCONFIG_TOUCHSCREEN_MCS5000=mCONFIG_TOUCHSCREEN_MMS114=mCONFIG_TOUCHSCREEN_MTOUCH=mCONFIG_TOUCHSCREEN_INEXIO=mCONFIG_TOUCHSCREEN_MK712=mCONFIG_TOUCHSCREEN_PENMOUNT=mCONFIG_TOUCHSCREEN_EDT_FT5X06=mCONFIG_TOUCHSCREEN_TOUCHRIGHT=mCONFIG_TOUCHSCREEN_TOUCHWIN=mCONFIG_TOUCHSCREEN_TI_AM335X_TSC=mCONFIG_TOUCHSCREEN_UCB1400=mCONFIG_TOUCHSCREEN_PIXCIR=mCONFIG_TOUCHSCREEN_WM831X=mCONFIG_TOUCHSCREEN_WM97XX=mCONFIG_TOUCHSCREEN_WM9705=yCONFIG_TOUCHSCREEN_WM9712=yCONFIG_TOUCHSCREEN_WM9713=yCONFIG_TOUCHSCREEN_USB_COMPOSITE=mCONFIG_TOUCHSCREEN_MC13783=mCONFIG_TOUCHSCREEN_USB_EGALAX=yCONFIG_TOUCHSCREEN_USB_PANJIT=yCONFIG_TOUCHSCREEN_USB_3M=yCONFIG_TOUCHSCREEN_USB_ITM=yCONFIG_TOUCHSCREEN_USB_ETURBO=yCONFIG_TOUCHSCREEN_USB_GUNZE=yCONFIG_TOUCHSCREEN_USB_DMC_TSC10=yCONFIG_TOUCHSCREEN_USB_IRTOUCH=yCONFIG_TOUCHSCREEN_USB_IDEALTEK=yCONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=yCONFIG_TOUCHSCREEN_USB_GOTOP=yCONFIG_TOUCHSCREEN_USB_JASTEC=yCONFIG_TOUCHSCREEN_USB_ELO=yCONFIG_TOUCHSCREEN_USB_E2I=yCONFIG_TOUCHSCREEN_USB_ZYTRONIC=yCONFIG_TOUCHSCREEN_USB_ETT_TC45USB=yCONFIG_TOUCHSCREEN_USB_NEXIO=yCONFIG_TOUCHSCREEN_USB_EASYTOUCH=yCONFIG_TOUCHSCREEN_TOUCHIT213=mCONFIG_TOUCHSCREEN_TSC_SERIO=mCONFIG_TOUCHSCREEN_TSC2005=mCONFIG_TOUCHSCREEN_TSC2007=mCONFIG_TOUCHSCREEN_W90X900=mCONFIG_TOUCHSCREEN_PCAP=mCONFIG_TOUCHSCREEN_ST1232=mCONFIG_TOUCHSCREEN_STMPE=mCONFIG_TOUCHSCREEN_TPS6507X=mCONFIG_INPUT_MISC=yCONFIG_INPUT_88PM860X_ONKEY=mCONFIG_INPUT_88PM80X_ONKEY=mCONFIG_INPUT_AD714X=mCONFIG_INPUT_AD714X_I2C=mCONFIG_INPUT_AD714X_SPI=mCONFIG_INPUT_ARIZONA_HAPTICS=mCONFIG_INPUT_BMA150=mCONFIG_INPUT_PCSPKR=mCONFIG_INPUT_MAX8925_ONKEY=mCONFIG_INPUT_MC13783_PWRBUTTON=mCONFIG_INPUT_MMA8450=mCONFIG_INPUT_MPU3050=mCONFIG_INPUT_APANEL=mCONFIG_INPUT_GP2A=mCONFIG_INPUT_GPIO_TILT_POLLED=mCONFIG_INPUT_ATLAS_BTNS=mCONFIG_INPUT_ATI_REMOTE2=mCONFIG_INPUT_KEYSPAN_REMOTE=mCONFIG_INPUT_KXTJ9=m
# CONFIG_INPUT_KXTJ9_POLLED_MODE is not setCONFIG_INPUT_POWERMATE=mCONFIG_INPUT_YEALINK=mCONFIG_INPUT_CM109=mCONFIG_INPUT_RETU_PWRBUTTON=mCONFIG_INPUT_TWL6040_VIBRA=mCONFIG_INPUT_UINPUT=yCONFIG_INPUT_PCF50633_PMU=mCONFIG_INPUT_PCF8574=mCONFIG_INPUT_PWM_BEEPER=mCONFIG_INPUT_GPIO_ROTARY_ENCODER=mCONFIG_INPUT_DA9052_ONKEY=mCONFIG_INPUT_DA9055_ONKEY=mCONFIG_INPUT_WM831X_ON=mCONFIG_INPUT_PCAP=mCONFIG_INPUT_ADXL34X=mCONFIG_INPUT_ADXL34X_I2C=mCONFIG_INPUT_ADXL34X_SPI=mCONFIG_INPUT_IMS_PCU=mCONFIG_INPUT_CMA3000=mCONFIG_INPUT_CMA3000_I2C=mCONFIG_INPUT_XEN_KBDDEV_FRONTEND=m
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=mCONFIG_SERIO_CT82C710=mCONFIG_SERIO_PARKBD=mCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=mCONFIG_SERIO_ALTERA_PS2=mCONFIG_SERIO_PS2MULT=mCONFIG_SERIO_ARC_PS2=mCONFIG_GAMEPORT=mCONFIG_GAMEPORT_NS558=mCONFIG_GAMEPORT_L4=mCONFIG_GAMEPORT_EMU10K1=mCONFIG_GAMEPORT_FM801=m
#
# Character devices
#CONFIG_TTY=yCONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_VT_CONSOLE_SLEEP=yCONFIG_HW_CONSOLE=yCONFIG_VT_HW_CONSOLE_BINDING=yCONFIG_UNIX98_PTYS=yCONFIG_DEVPTS_MULTIPLE_INSTANCES=yCONFIG_LEGACY_PTYS=yCONFIG_LEGACY_PTY_COUNT=0CONFIG_SERIAL_NONSTANDARD=yCONFIG_ROCKETPORT=mCONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not setCONFIG_MOXA_INTELLIO=mCONFIG_MOXA_SMARTIO=mCONFIG_SYNCLINK=mCONFIG_SYNCLINKMP=mCONFIG_SYNCLINK_GT=mCONFIG_NOZOMI=mCONFIG_ISI=mCONFIG_N_HDLC=m
# CONFIG_N_GSM is not setCONFIG_TRACE_ROUTER=mCONFIG_TRACE_SINK=m
# CONFIG_DEVKMEM is not setCONFIG_STALDRV=y
#
# Serial drivers
#CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=48 CONFIG_SERIAL_8250_RUNTIME_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_DW=m
#
# Non-8250 serial port support
#CONFIG_SERIAL_KGDB_NMI=yCONFIG_SERIAL_MAX3100=mCONFIG_SERIAL_MAX310X=yCONFIG_SERIAL_MRST_MAX3110=mCONFIG_SERIAL_MFD_HSU=mCONFIG_SERIAL_UARTLITE=mCONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=yCONFIG_CONSOLE_POLL=yCONFIG_SERIAL_JSM=mCONFIG_SERIAL_SCCNXP=yCONFIG_SERIAL_SCCNXP_CONSOLE=yCONFIG_SERIAL_TIMBERDALE=mCONFIG_SERIAL_ALTERA_JTAGUART=mCONFIG_SERIAL_ALTERA_UART=mCONFIG_SERIAL_ALTERA_UART_MAXPORTS=4CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200
# CONFIG_SERIAL_IFX6X60 is not setCONFIG_SERIAL_PCH_UART=mCONFIG_SERIAL_ARC=mCONFIG_SERIAL_ARC_NR_PORTS=1CONFIG_SERIAL_RP2=mCONFIG_SERIAL_RP2_NR_UARTS=32CONFIG_TTY_PRINTK=yCONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not setCONFIG_PPDEV=mCONFIG_HVC_DRIVER=yCONFIG_HVC_IRQ=yCONFIG_HVC_XEN=yCONFIG_HVC_XEN_FRONTEND=yCONFIG_VIRTIO_CONSOLE=mCONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not setCONFIG_IPMI_DEVICE_INTERFACE=mCONFIG_IPMI_SI=mCONFIG_IPMI_WATCHDOG=mCONFIG_IPMI_POWEROFF=mCONFIG_HW_RANDOM=yCONFIG_HW_RANDOM_TIMERIOMEM=mCONFIG_HW_RANDOM_INTEL=mCONFIG_HW_RANDOM_AMD=m
# CONFIG_HW_RANDOM_ATMEL is not setCONFIG_HW_RANDOM_VIA=mCONFIG_HW_RANDOM_VIRTIO=mCONFIG_HW_RANDOM_EXYNOS=mCONFIG_HW_RANDOM_TPM=mCONFIG_NVRAM=mCONFIG_R3964=mCONFIG_APPLICOM=m
#
# PCMCIA character devices
#CONFIG_SYNCLINK_CS=mCONFIG_CARDMAN_4000=mCONFIG_CARDMAN_4040=mCONFIG_IPWIRELESS=mCONFIG_MWAVE=mCONFIG_RAW_DRIVER=mCONFIG_MAX_RAW_DEVS=256CONFIG_HPET=yCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=mCONFIG_TCG_TPM=yCONFIG_TCG_TIS=mCONFIG_TCG_TIS_I2C_INFINEON=mCONFIG_TCG_NSC=mCONFIG_TCG_ATMEL=mCONFIG_TCG_INFINEON=mCONFIG_TCG_ST33_I2C=mCONFIG_TELCLOCK=mCONFIG_DEVPORT=yCONFIG_I2C=yCONFIG_I2C_BOARDINFO=yCONFIG_I2C_COMPAT=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_MUX=m
#
# Multiplexer I2C Chip support
#CONFIG_I2C_MUX_GPIO=mCONFIG_I2C_MUX_PCA9541=m
CONFIG_I2C_MUX_PCA954x=mCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_SMBUS=mCONFIG_I2C_ALGOBIT=mCONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#CONFIG_I2C_ALI1535=mCONFIG_I2C_ALI1563=mCONFIG_I2C_ALI15X3=mCONFIG_I2C_AMD756=mCONFIG_I2C_AMD756_S4882=mCONFIG_I2C_AMD8111=mCONFIG_I2C_I801=mCONFIG_I2C_ISCH=mCONFIG_I2C_ISMT=mCONFIG_I2C_PIIX4=mCONFIG_I2C_NFORCE2=mCONFIG_I2C_NFORCE2_S4985=mCONFIG_I2C_SIS5595=mCONFIG_I2C_SIS630=mCONFIG_I2C_SIS96X=mCONFIG_I2C_VIA=mCONFIG_I2C_VIAPRO=m
#
# ACPI drivers
#CONFIG_I2C_SCMI=m
#
# I2C system bus drivers (mostly embedded / system-on-chip) #CONFIG_I2C_CBUS_GPIO=m CONFIG_I2C_DESIGNWARE_CORE=m CONFIG_I2C_DESIGNWARE_PLATFORM=m CONFIG_I2C_DESIGNWARE_PCI=mCONFIG_I2C_EG20T=mCONFIG_I2C_GPIO=mCONFIG_I2C_INTEL_MID=mCONFIG_I2C_OCORES=mCONFIG_I2C_PCA_PLATFORM=m
# CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=mCONFIG_I2C_XILINX=m
#
# External I2C/SMBus adapter drivers
#CONFIG_I2C_DIOLAN_U2C=mCONFIG_I2C_PARPORT=mCONFIG_I2C_PARPORT_LIGHT=mCONFIG_I2C_TAOS_EVM=mCONFIG_I2C_TINY_USB=mCONFIG_I2C_VIPERBOARD=m
#
# Other I2C/SMBus bus drivers
#CONFIG_I2C_STUB=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not setCONFIG_SPI=y
# CONFIG_SPI_DEBUG is not setCONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#CONFIG_SPI_ALTERA=mCONFIG_SPI_BITBANG=mCONFIG_SPI_BUTTERFLY=mCONFIG_SPI_GPIO=mCONFIG_SPI_LM70_LLP=mCONFIG_SPI_OC_TINY=mCONFIG_SPI_PXA2XX_DMA=yCONFIG_SPI_PXA2XX=mCONFIG_SPI_PXA2XX_PCI=mCONFIG_SPI_SC18IS602=mCONFIG_SPI_TOPCLIFF_PCH=mCONFIG_SPI_XCOMM=m
# CONFIG_SPI_XILINX is not setCONFIG_SPI_DESIGNWARE=mCONFIG_SPI_DW_PCI=mCONFIG_SPI_DW_MID_DMA=yCONFIG_SPI_DW_MMIO=m
#
# SPI Protocol Masters
#CONFIG_SPI_SPIDEV=mCONFIG_SPI_TLE62X0=m
#
# Qualcomm MSM SSBI bus support
#CONFIG_SSBI=mCONFIG_HSI=mCONFIG_HSI_BOARDINFO=y
#
# HSI clients
#CONFIG_HSI_CHAR=m
#
# PPS support
#CONFIG_PPS=m
# CONFIG_PPS_DEBUG is not set
#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not setCONFIG_PPS_CLIENT_LDISC=mCONFIG_PPS_CLIENT_PARPORT=mCONFIG_PPS_CLIENT_GPIO=m
#
# PPS generators support
#
#
# PTP clock support
#CONFIG_PTP_1588_CLOCK=m
#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. #CONFIG_PTP_1588_CLOCK_PCH=m CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=yCONFIG_GPIO_DEVRES=yCONFIG_GPIOLIB=yCONFIG_GPIO_ACPI=y
# CONFIG_DEBUG_GPIO is not set
# CONFIG_GPIO_SYSFS is not setCONFIG_GPIO_GENERIC=mCONFIG_GPIO_DA9052=mCONFIG_GPIO_DA9055=mCONFIG_GPIO_MAX730X=m
#
# Memory mapped GPIO drivers:
#CONFIG_GPIO_GENERIC_PLATFORM=mCONFIG_GPIO_IT8761E=mCONFIG_GPIO_TS5500=mCONFIG_GPIO_SCH=mCONFIG_GPIO_ICH=mCONFIG_GPIO_VX855=mCONFIG_GPIO_LYNXPOINT=y
#
# I2C GPIO expanders:
#CONFIG_GPIO_ARIZONA=mCONFIG_GPIO_MAX7300=mCONFIG_GPIO_MAX732X=mCONFIG_GPIO_PCA953X=mCONFIG_GPIO_PCF857X=mCONFIG_GPIO_RC5T583=yCONFIG_GPIO_SX150X=yCONFIG_GPIO_STMPE=yCONFIG_GPIO_TC3589X=yCONFIG_GPIO_TPS65912=mCONFIG_GPIO_TWL6040=mCONFIG_GPIO_WM831X=mCONFIG_GPIO_WM8350=mCONFIG_GPIO_WM8994=mCONFIG_GPIO_ADP5520=mCONFIG_GPIO_ADP5588=m
#
# PCI GPIO expanders:
#CONFIG_GPIO_CS5535=mCONFIG_GPIO_AMD8111=mCONFIG_GPIO_LANGWELL=yCONFIG_GPIO_PCH=mCONFIG_GPIO_ML_IOH=mCONFIG_GPIO_TIMBERDALE=yCONFIG_GPIO_RDC321X=m
#
# SPI GPIO expanders:
#CONFIG_GPIO_MAX7301=mCONFIG_GPIO_MCP23S08=mCONFIG_GPIO_MC33880=mCONFIG_GPIO_74X164=m
#
# AC97 GPIO expanders:
#CONFIG_GPIO_UCB1400=y
#
# MODULbus GPIO expanders:
#CONFIG_GPIO_JANZ_TTL=mCONFIG_GPIO_PALMAS=yCONFIG_GPIO_TPS6586X=yCONFIG_GPIO_TPS65910=y
#
# USB GPIO expanders:
#CONFIG_GPIO_VIPERBOARD=mCONFIG_W1=mCONFIG_W1_CON=y
#
# 1-wire Bus Masters
#CONFIG_W1_MASTER_MATROX=mCONFIG_W1_MASTER_DS2490=mCONFIG_W1_MASTER_DS2482=mCONFIG_W1_MASTER_DS1WM=mCONFIG_W1_MASTER_GPIO=m
#
# 1-wire Slaves
#CONFIG_W1_SLAVE_THERM=mCONFIG_W1_SLAVE_SMEM=mCONFIG_W1_SLAVE_DS2408=mCONFIG_W1_SLAVE_DS2408_READBACK=yCONFIG_W1_SLAVE_DS2413=mCONFIG_W1_SLAVE_DS2423=mCONFIG_W1_SLAVE_DS2431=mCONFIG_W1_SLAVE_DS2433=m
# CONFIG_W1_SLAVE_DS2433_CRC is not setCONFIG_W1_SLAVE_DS2760=mCONFIG_W1_SLAVE_DS2780=mCONFIG_W1_SLAVE_DS2781=mCONFIG_W1_SLAVE_DS28E04=mCONFIG_W1_SLAVE_BQ27000=mCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not setCONFIG_PDA_POWER=mCONFIG_GENERIC_ADC_BATTERY=mCONFIG_MAX8925_POWER=mCONFIG_WM831X_BACKUP=mCONFIG_WM831X_POWER=mCONFIG_WM8350_POWER=mCONFIG_TEST_POWER=mCONFIG_BATTERY_88PM860X=mCONFIG_BATTERY_DS2760=mCONFIG_BATTERY_DS2780=mCONFIG_BATTERY_DS2781=mCONFIG_BATTERY_DS2782=mCONFIG_BATTERY_SBS=m
CONFIG_BATTERY_BQ27x00=mCONFIG_BATTERY_BQ27X00_I2C=yCONFIG_BATTERY_BQ27X00_PLATFORM=yCONFIG_BATTERY_DA9030=mCONFIG_BATTERY_DA9052=mCONFIG_BATTERY_MAX17040=mCONFIG_BATTERY_MAX17042=mCONFIG_CHARGER_88PM860X=mCONFIG_CHARGER_PCF50633=mCONFIG_CHARGER_ISP1704=mCONFIG_CHARGER_MAX8903=mCONFIG_CHARGER_LP8727=mCONFIG_CHARGER_LP8788=mCONFIG_CHARGER_GPIO=mCONFIG_CHARGER_MANAGER=yCONFIG_CHARGER_MAX8997=mCONFIG_CHARGER_MAX8998=mCONFIG_CHARGER_BQ2415X=mCONFIG_CHARGER_SMB347=mCONFIG_CHARGER_TPS65090=mCONFIG_BATTERY_GOLDFISH=mCONFIG_POWER_RESET=yCONFIG_POWER_AVS=yCONFIG_HWMON=yCONFIG_HWMON_VID=m
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#CONFIG_SENSORS_ABITUGURU=mCONFIG_SENSORS_ABITUGURU3=mCONFIG_SENSORS_AD7314=mCONFIG_SENSORS_AD7414=mCONFIG_SENSORS_AD7418=mCONFIG_SENSORS_ADCXX=mCONFIG_SENSORS_ADM1021=mCONFIG_SENSORS_ADM1025=mCONFIG_SENSORS_ADM1026=mCONFIG_SENSORS_ADM1029=mCONFIG_SENSORS_ADM1031=mCONFIG_SENSORS_ADM9240=mCONFIG_SENSORS_ADT7X10=mCONFIG_SENSORS_ADT7310=mCONFIG_SENSORS_ADT7410=mCONFIG_SENSORS_ADT7411=mCONFIG_SENSORS_ADT7462=mCONFIG_SENSORS_ADT7470=mCONFIG_SENSORS_ADT7475=mCONFIG_SENSORS_ASC7621=mCONFIG_SENSORS_K8TEMP=mCONFIG_SENSORS_K10TEMP=mCONFIG_SENSORS_FAM15H_POWER=mCONFIG_SENSORS_ASB100=mCONFIG_SENSORS_ATXP1=mCONFIG_SENSORS_DS620=mCONFIG_SENSORS_DS1621=mCONFIG_SENSORS_DA9052_ADC=mCONFIG_SENSORS_DA9055=mCONFIG_SENSORS_I5K_AMB=mCONFIG_SENSORS_F71805F=mCONFIG_SENSORS_F71882FG=mCONFIG_SENSORS_F75375S=mCONFIG_SENSORS_FSCHMD=mCONFIG_SENSORS_G760A=mCONFIG_SENSORS_GL518SM=mCONFIG_SENSORS_GL520SM=mCONFIG_SENSORS_GPIO_FAN=mCONFIG_SENSORS_HIH6130=mCONFIG_SENSORS_CORETEMP=mCONFIG_SENSORS_IBMAEM=mCONFIG_SENSORS_IBMPEX=mCONFIG_SENSORS_IIO_HWMON=mCONFIG_SENSORS_IT87=mCONFIG_SENSORS_JC42=mCONFIG_SENSORS_LINEAGE=mCONFIG_SENSORS_LM63=mCONFIG_SENSORS_LM70=mCONFIG_SENSORS_LM73=mCONFIG_SENSORS_LM75=mCONFIG_SENSORS_LM77=mCONFIG_SENSORS_LM78=mCONFIG_SENSORS_LM80=mCONFIG_SENSORS_LM83=mCONFIG_SENSORS_LM85=mCONFIG_SENSORS_LM87=mCONFIG_SENSORS_LM90=mCONFIG_SENSORS_LM92=mCONFIG_SENSORS_LM93=mCONFIG_SENSORS_LTC4151=mCONFIG_SENSORS_LTC4215=mCONFIG_SENSORS_LTC4245=mCONFIG_SENSORS_LTC4261=mCONFIG_SENSORS_LM95234=mCONFIG_SENSORS_LM95241=mCONFIG_SENSORS_LM95245=mCONFIG_SENSORS_MAX1111=mCONFIG_SENSORS_MAX16065=mCONFIG_SENSORS_MAX1619=mCONFIG_SENSORS_MAX1668=mCONFIG_SENSORS_MAX197=mCONFIG_SENSORS_MAX6639=mCONFIG_SENSORS_MAX6642=mCONFIG_SENSORS_MAX6650=mCONFIG_SENSORS_MAX6697=mCONFIG_SENSORS_MCP3021=mCONFIG_SENSORS_NCT6775=mCONFIG_SENSORS_NTC_THERMISTOR=mCONFIG_SENSORS_PC87360=mCONFIG_SENSORS_PC87427=mCONFIG_SENSORS_PCF8591=mCONFIG_PMBUS=mCONFIG_SENSORS_PMBUS=mCONFIG_SENSORS_ADM1275=mCONFIG_SENSORS_LM25066=mCONFIG_SENSORS_LTC2978=mCONFIG_SENSORS_MAX16064=mCONFIG_SENSORS_MAX34440=mCONFIG_SENSORS_MAX8688=mCONFIG_SENSORS_UCD9000=mCONFIG_SENSORS_UCD9200=mCONFIG_SENSORS_ZL6100=mCONFIG_SENSORS_SHT15=mCONFIG_SENSORS_SHT21=mCONFIG_SENSORS_SIS5595=mCONFIG_SENSORS_SMM665=mCONFIG_SENSORS_DME1737=mCONFIG_SENSORS_EMC1403=mCONFIG_SENSORS_EMC2103=mCONFIG_SENSORS_EMC6W201=mCONFIG_SENSORS_SMSC47M1=mCONFIG_SENSORS_SMSC47M192=mCONFIG_SENSORS_SMSC47B397=mCONFIG_SENSORS_SCH56XX_COMMON=mCONFIG_SENSORS_SCH5627=mCONFIG_SENSORS_SCH5636=mCONFIG_SENSORS_ADS1015=mCONFIG_SENSORS_ADS7828=mCONFIG_SENSORS_ADS7871=mCONFIG_SENSORS_AMC6821=mCONFIG_SENSORS_INA209=mCONFIG_SENSORS_INA2XX=mCONFIG_SENSORS_THMC50=mCONFIG_SENSORS_TMP102=mCONFIG_SENSORS_TMP401=mCONFIG_SENSORS_TMP421=mCONFIG_SENSORS_VIA_CPUTEMP=mCONFIG_SENSORS_VIA686A=mCONFIG_SENSORS_VT1211=mCONFIG_SENSORS_VT8231=mCONFIG_SENSORS_W83781D=mCONFIG_SENSORS_W83791D=mCONFIG_SENSORS_W83792D=mCONFIG_SENSORS_W83793=mCONFIG_SENSORS_W83795=m
# CONFIG_SENSORS_W83795_FANCTRL is not setCONFIG_SENSORS_W83L785TS=mCONFIG_SENSORS_W83L786NG=mCONFIG_SENSORS_W83627HF=mCONFIG_SENSORS_W83627EHF=mCONFIG_SENSORS_WM831X=mCONFIG_SENSORS_WM8350=mCONFIG_SENSORS_APPLESMC=mCONFIG_SENSORS_MC13783_ADC=m
#
# ACPI drivers
#CONFIG_SENSORS_ACPI_POWER=m CONFIG_SENSORS_ATK0110=mCONFIG_THERMAL=yCONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_CPU_THERMAL=y CONFIG_THERMAL_EMULATION=y CONFIG_INTEL_POWERCLAMP=m CONFIG_WATCHDOG=yCONFIG_WATCHDOG_CORE=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=mCONFIG_DA9052_WATCHDOG=mCONFIG_DA9055_WATCHDOG=mCONFIG_WM831X_WATCHDOG=mCONFIG_WM8350_WATCHDOG=mCONFIG_RETU_WATCHDOG=mCONFIG_ACQUIRE_WDT=mCONFIG_ADVANTECH_WDT=mCONFIG_ALIM1535_WDT=mCONFIG_ALIM7101_WDT=mCONFIG_F71808E_WDT=mCONFIG_SP5100_TCO=mCONFIG_SC520_WDT=mCONFIG_SBC_FITPC2_WATCHDOG=mCONFIG_EUROTECH_WDT=mCONFIG_IB700_WDT=mCONFIG_IBMASR=mCONFIG_WAFER_WDT=mCONFIG_I6300ESB_WDT=mCONFIG_IE6XX_WDT=mCONFIG_ITCO_WDT=mCONFIG_ITCO_VENDOR_SUPPORT=yCONFIG_IT8712F_WDT=mCONFIG_IT87_WDT=mCONFIG_HP_WATCHDOG=mCONFIG_HPWDT_NMI_DECODING=yCONFIG_SC1200_WDT=mCONFIG_PC87413_WDT=mCONFIG_NV_TCO=mCONFIG_60XX_WDT=mCONFIG_SBC8360_WDT=mCONFIG_CPU5_WDT=mCONFIG_SMSC_SCH311X_WDT=mCONFIG_SMSC37B787_WDT=mCONFIG_VIA_WDT=mCONFIG_W83627HF_WDT=mCONFIG_W83697HF_WDT=mCONFIG_W83697UG_WDT=mCONFIG_W83877F_WDT=mCONFIG_W83977F_WDT=mCONFIG_MACHZ_WDT=mCONFIG_SBC_EPX_C3_WATCHDOG=mCONFIG_XEN_WDT=m
#
# PCI-based Watchdog Cards
#CONFIG_PCIPCWATCHDOG=mCONFIG_WDTPCI=m
#
# USB-based Watchdog Cards
#CONFIG_USBPCWATCHDOG=mCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#CONFIG_SSB=mCONFIG_SSB_SPROM=yCONFIG_SSB_BLOCKIO=yCONFIG_SSB_PCIHOST_POSSIBLE=yCONFIG_SSB_PCIHOST=yCONFIG_SSB_B43_PCI_BRIDGE=yCONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not setCONFIG_SSB_SDIOHOST_POSSIBLE=yCONFIG_SSB_SDIOHOST=y
# CONFIG_SSB_SILENT is not set
# CONFIG_SSB_DEBUG is not setCONFIG_SSB_DRIVER_PCICORE_POSSIBLE=yCONFIG_SSB_DRIVER_PCICORE=yCONFIG_SSB_DRIVER_GPIO=yCONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#CONFIG_BCMA=mCONFIG_BCMA_BLOCKIO=yCONFIG_BCMA_HOST_PCI_POSSIBLE=yCONFIG_BCMA_HOST_PCI=yCONFIG_BCMA_DRIVER_GMAC_CMN=yCONFIG_BCMA_DRIVER_GPIO=y
# CONFIG_BCMA_DEBUG is not set
#
# Multifunction device drivers
#CONFIG_MFD_CORE=yCONFIG_MFD_CS5535=mCONFIG_MFD_AS3711=yCONFIG_PMIC_ADP5520=yCONFIG_MFD_AAT2870_CORE=yCONFIG_MFD_CROS_EC=mCONFIG_MFD_CROS_EC_I2C=mCONFIG_MFD_CROS_EC_SPI=mCONFIG_PMIC_DA903X=yCONFIG_PMIC_DA9052=yCONFIG_MFD_DA9052_SPI=yCONFIG_MFD_DA9052_I2C=yCONFIG_MFD_DA9055=yCONFIG_MFD_MC13783=mCONFIG_MFD_MC13XXX=mCONFIG_MFD_MC13XXX_SPI=mCONFIG_MFD_MC13XXX_I2C=mCONFIG_HTC_PASIC3=mCONFIG_HTC_I2CPLD=yCONFIG_LPC_ICH=mCONFIG_LPC_SCH=mCONFIG_MFD_JANZ_CMODIO=mCONFIG_MFD_88PM800=mCONFIG_MFD_88PM805=mCONFIG_MFD_88PM860X=yCONFIG_MFD_MAX77686=yCONFIG_MFD_MAX77693=yCONFIG_MFD_MAX8907=mCONFIG_MFD_MAX8925=yCONFIG_MFD_MAX8997=yCONFIG_MFD_MAX8998=yCONFIG_EZX_PCAP=yCONFIG_MFD_VIPERBOARD=mCONFIG_MFD_RETU=mCONFIG_MFD_PCF50633=mCONFIG_PCF50633_ADC=mCONFIG_PCF50633_GPIO=mCONFIG_UCB1400_CORE=mCONFIG_MFD_RDC321X=mCONFIG_MFD_RTSX_PCI=mCONFIG_MFD_RC5T583=yCONFIG_MFD_SEC_CORE=yCONFIG_MFD_SI476X_CORE=mCONFIG_MFD_SM501=m
# CONFIG_MFD_SM501_GPIO is not setCONFIG_MFD_SMSC=yCONFIG_ABX500_CORE=yCONFIG_AB3100_CORE=yCONFIG_AB3100_OTP=mCONFIG_MFD_STMPE=y
#
# STMicroelectronics STMPE Interface Drivers
#CONFIG_STMPE_I2C=yCONFIG_STMPE_SPI=yCONFIG_MFD_SYSCON=yCONFIG_MFD_TI_AM335X_TSCADC=mCONFIG_MFD_LP8788=yCONFIG_MFD_PALMAS=yCONFIG_TPS6105X=mCONFIG_TPS65010=mCONFIG_TPS6507X=mCONFIG_MFD_TPS65090=yCONFIG_MFD_TPS65217=mCONFIG_MFD_TPS6586X=yCONFIG_MFD_TPS65910=yCONFIG_MFD_TPS65912=yCONFIG_MFD_TPS65912_I2C=yCONFIG_MFD_TPS65912_SPI=yCONFIG_MFD_TPS80031=y
# CONFIG_TWL4030_CORE is not setCONFIG_TWL6040_CORE=yCONFIG_MFD_WL1273_CORE=mCONFIG_MFD_LM3533=mCONFIG_MFD_TIMBERDALE=mCONFIG_MFD_TC3589X=y
# CONFIG_MFD_TMIO is not setCONFIG_MFD_VX855=mCONFIG_MFD_ARIZONA=yCONFIG_MFD_ARIZONA_I2C=mCONFIG_MFD_ARIZONA_SPI=mCONFIG_MFD_WM5102=yCONFIG_MFD_WM5110=yCONFIG_MFD_WM8400=yCONFIG_MFD_WM831X=yCONFIG_MFD_WM831X_I2C=yCONFIG_MFD_WM831X_SPI=yCONFIG_MFD_WM8350=yCONFIG_MFD_WM8350_I2C=yCONFIG_MFD_WM8994=yCONFIG_REGULATOR=y
# CONFIG_REGULATOR_DEBUG is not set
# CONFIG_REGULATOR_DUMMY is not setCONFIG_REGULATOR_FIXED_VOLTAGE=mCONFIG_REGULATOR_VIRTUAL_CONSUMER=mCONFIG_REGULATOR_USERSPACE_CONSUMER=mCONFIG_REGULATOR_GPIO=mCONFIG_REGULATOR_AD5398=mCONFIG_REGULATOR_AAT2870=mCONFIG_REGULATOR_ARIZONA=mCONFIG_REGULATOR_DA903X=mCONFIG_REGULATOR_DA9052=mCONFIG_REGULATOR_DA9055=mCONFIG_REGULATOR_FAN53555=mCONFIG_REGULATOR_ANATOP=mCONFIG_REGULATOR_MC13XXX_CORE=mCONFIG_REGULATOR_MC13783=mCONFIG_REGULATOR_MC13892=mCONFIG_REGULATOR_ISL6271A=mCONFIG_REGULATOR_88PM8607=yCONFIG_REGULATOR_MAX1586=mCONFIG_REGULATOR_MAX8649=mCONFIG_REGULATOR_MAX8660=mCONFIG_REGULATOR_MAX8907=mCONFIG_REGULATOR_MAX8925=mCONFIG_REGULATOR_MAX8952=mCONFIG_REGULATOR_MAX8973=mCONFIG_REGULATOR_MAX8997=mCONFIG_REGULATOR_MAX8998=mCONFIG_REGULATOR_MAX77686=mCONFIG_REGULATOR_PCAP=mCONFIG_REGULATOR_LP3971=mCONFIG_REGULATOR_LP3972=mCONFIG_REGULATOR_LP872X=yCONFIG_REGULATOR_LP8755=mCONFIG_REGULATOR_LP8788=yCONFIG_REGULATOR_PCF50633=mCONFIG_REGULATOR_RC5T583=mCONFIG_REGULATOR_S2MPS11=mCONFIG_REGULATOR_S5M8767=mCONFIG_REGULATOR_AB3100=mCONFIG_REGULATOR_PALMAS=mCONFIG_REGULATOR_TPS51632=mCONFIG_REGULATOR_TPS6105X=mCONFIG_REGULATOR_TPS62360=mCONFIG_REGULATOR_TPS65023=mCONFIG_REGULATOR_TPS6507X=mCONFIG_REGULATOR_TPS65090=mCONFIG_REGULATOR_TPS65217=mCONFIG_REGULATOR_TPS6524X=mCONFIG_REGULATOR_TPS6586X=mCONFIG_REGULATOR_TPS65910=mCONFIG_REGULATOR_TPS65912=mCONFIG_REGULATOR_TPS80031=mCONFIG_REGULATOR_WM831X=mCONFIG_REGULATOR_WM8350=mCONFIG_REGULATOR_WM8400=mCONFIG_REGULATOR_WM8994=mCONFIG_REGULATOR_AS3711=mCONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#CONFIG_MEDIA_CAMERA_SUPPORT=yCONFIG_MEDIA_ANALOG_TV_SUPPORT=yCONFIG_MEDIA_DIGITAL_TV_SUPPORT=yCONFIG_MEDIA_RADIO_SUPPORT=yCONFIG_MEDIA_RC_SUPPORT=y
# CONFIG_MEDIA_CONTROLLER is not setCONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L2=m
# CONFIG_VIDEO_ADV_DEBUG is not set
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not setCONFIG_VIDEO_TUNER=mCONFIG_V4L2_MEM2MEM_DEV=mCONFIG_VIDEOBUF_GEN=mCONFIG_VIDEOBUF_DMA_SG=mCONFIG_VIDEOBUF_VMALLOC=mCONFIG_VIDEOBUF_DMA_CONTIG=mCONFIG_VIDEOBUF_DVB=mCONFIG_VIDEOBUF2_CORE=mCONFIG_VIDEOBUF2_MEMOPS=mCONFIG_VIDEOBUF2_DMA_CONTIG=mCONFIG_VIDEOBUF2_VMALLOC=mCONFIG_VIDEO_V4L2_INT_DEVICE=mCONFIG_DVB_CORE=mCONFIG_DVB_NET=yCONFIG_TTPCI_EEPROM=mCONFIG_DVB_MAX_ADAPTERS=8CONFIG_DVB_DYNAMIC_MINORS=y
#
# Media drivers
#CONFIG_RC_CORE=mCONFIG_RC_MAP=mCONFIG_RC_DECODERS=yCONFIG_LIRC=mCONFIG_IR_LIRC_CODEC=mCONFIG_IR_NEC_DECODER=mCONFIG_IR_RC5_DECODER=mCONFIG_IR_RC6_DECODER=mCONFIG_IR_JVC_DECODER=mCONFIG_IR_SONY_DECODER=mCONFIG_IR_RC5_SZ_DECODER=mCONFIG_IR_SANYO_DECODER=mCONFIG_IR_MCE_KBD_DECODER=mCONFIG_RC_DEVICES=yCONFIG_RC_ATI_REMOTE=mCONFIG_IR_ENE=mCONFIG_IR_IMON=mCONFIG_IR_MCEUSB=mCONFIG_IR_ITE_CIR=mCONFIG_IR_FINTEK=mCONFIG_IR_NUVOTON=mCONFIG_IR_REDRAT3=mCONFIG_IR_STREAMZAP=mCONFIG_IR_WINBOND_CIR=mCONFIG_IR_IGUANA=mCONFIG_IR_TTUSBIR=mCONFIG_RC_LOOPBACK=mCONFIG_IR_GPIO_CIR=mCONFIG_MEDIA_USB_SUPPORT=y
#
# Webcam devices
#CONFIG_USB_VIDEO_CLASS=mCONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=yCONFIG_USB_GSPCA=mCONFIG_USB_M5602=mCONFIG_USB_STV06XX=mCONFIG_USB_GL860=mCONFIG_USB_GSPCA_BENQ=mCONFIG_USB_GSPCA_CONEX=mCONFIG_USB_GSPCA_CPIA1=mCONFIG_USB_GSPCA_ETOMS=mCONFIG_USB_GSPCA_FINEPIX=mCONFIG_USB_GSPCA_JEILINJ=mCONFIG_USB_GSPCA_JL2005BCD=mCONFIG_USB_GSPCA_KINECT=mCONFIG_USB_GSPCA_KONICA=mCONFIG_USB_GSPCA_MARS=mCONFIG_USB_GSPCA_MR97310A=mCONFIG_USB_GSPCA_NW80X=mCONFIG_USB_GSPCA_OV519=mCONFIG_USB_GSPCA_OV534=mCONFIG_USB_GSPCA_OV534_9=mCONFIG_USB_GSPCA_PAC207=mCONFIG_USB_GSPCA_PAC7302=mCONFIG_USB_GSPCA_PAC7311=mCONFIG_USB_GSPCA_SE401=mCONFIG_USB_GSPCA_SN9C2028=mCONFIG_USB_GSPCA_SN9C20X=mCONFIG_USB_GSPCA_SONIXB=mCONFIG_USB_GSPCA_SONIXJ=mCONFIG_USB_GSPCA_SPCA500=mCONFIG_USB_GSPCA_SPCA501=mCONFIG_USB_GSPCA_SPCA505=mCONFIG_USB_GSPCA_SPCA506=mCONFIG_USB_GSPCA_SPCA508=mCONFIG_USB_GSPCA_SPCA561=mCONFIG_USB_GSPCA_SPCA1528=mCONFIG_USB_GSPCA_SQ905=mCONFIG_USB_GSPCA_SQ905C=mCONFIG_USB_GSPCA_SQ930X=mCONFIG_USB_GSPCA_STK014=mCONFIG_USB_GSPCA_STV0680=mCONFIG_USB_GSPCA_SUNPLUS=mCONFIG_USB_GSPCA_T613=mCONFIG_USB_GSPCA_TOPRO=mCONFIG_USB_GSPCA_TV8532=mCONFIG_USB_GSPCA_VC032X=mCONFIG_USB_GSPCA_VICAM=mCONFIG_USB_GSPCA_XIRLINK_CIT=mCONFIG_USB_GSPCA_ZC3XX=mCONFIG_USB_PWC=m
# CONFIG_USB_PWC_DEBUG is not setCONFIG_USB_PWC_INPUT_EVDEV=yCONFIG_VIDEO_CPIA2=mCONFIG_USB_ZR364XX=mCONFIG_USB_STKWEBCAM=mCONFIG_USB_S2255=m
# CONFIG_USB_SN9C102 is not set
#
# Analog TV USB devices
#CONFIG_VIDEO_PVRUSB2=mCONFIG_VIDEO_PVRUSB2_SYSFS=yCONFIG_VIDEO_PVRUSB2_DVB=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not setCONFIG_VIDEO_HDPVR=mCONFIG_VIDEO_TLG2300=mCONFIG_VIDEO_USBVISION=mCONFIG_VIDEO_STK1160=mCONFIG_VIDEO_STK1160_AC97=y
#
# Analog/digital TV USB devices
#CONFIG_VIDEO_AU0828=mCONFIG_VIDEO_AU0828_V4L2=yCONFIG_VIDEO_CX231XX=mCONFIG_VIDEO_CX231XX_RC=yCONFIG_VIDEO_CX231XX_ALSA=mCONFIG_VIDEO_CX231XX_DVB=mCONFIG_VIDEO_TM6000=mCONFIG_VIDEO_TM6000_ALSA=mCONFIG_VIDEO_TM6000_DVB=m
#
# Digital TV USB devices
#CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not setCONFIG_DVB_USB_A800=mCONFIG_DVB_USB_DIBUSB_MB=m
# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not setCONFIG_DVB_USB_DIBUSB_MC=mCONFIG_DVB_USB_DIB0700=mCONFIG_DVB_USB_UMT_010=mCONFIG_DVB_USB_CXUSB=mCONFIG_DVB_USB_M920X=mCONFIG_DVB_USB_DIGITV=mCONFIG_DVB_USB_VP7045=mCONFIG_DVB_USB_VP702X=mCONFIG_DVB_USB_GP8PSK=mCONFIG_DVB_USB_NOVA_T_USB2=mCONFIG_DVB_USB_TTUSB2=mCONFIG_DVB_USB_DTT200U=mCONFIG_DVB_USB_OPERA1=mCONFIG_DVB_USB_AF9005=mCONFIG_DVB_USB_AF9005_REMOTE=mCONFIG_DVB_USB_PCTV452E=mCONFIG_DVB_USB_DW2102=mCONFIG_DVB_USB_CINERGY_T2=mCONFIG_DVB_USB_DTV5100=mCONFIG_DVB_USB_FRIIO=mCONFIG_DVB_USB_AZ6027=mCONFIG_DVB_USB_TECHNISAT_USB2=mCONFIG_DVB_USB_V2=mCONFIG_DVB_USB_AF9015=mCONFIG_DVB_USB_AF9035=mCONFIG_DVB_USB_ANYSEE=mCONFIG_DVB_USB_AU6610=mCONFIG_DVB_USB_AZ6007=mCONFIG_DVB_USB_CE6230=mCONFIG_DVB_USB_EC168=mCONFIG_DVB_USB_GL861=mCONFIG_DVB_USB_IT913X=mCONFIG_DVB_USB_LME2510=mCONFIG_DVB_USB_MXL111SF=mCONFIG_DVB_USB_RTL28XXU=mCONFIG_DVB_TTUSB_BUDGET=mCONFIG_DVB_TTUSB_DEC=mCONFIG_SMS_USB_DRV=mCONFIG_DVB_B2C2_FLEXCOP_USB=m
# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set
#
# Webcam, TV (analog/digital) USB devices
#CONFIG_VIDEO_EM28XX=mCONFIG_VIDEO_EM28XX_ALSA=mCONFIG_VIDEO_EM28XX_DVB=mCONFIG_VIDEO_EM28XX_RC=mCONFIG_MEDIA_PCI_SUPPORT=y
#
# Media capture support
#CONFIG_VIDEO_MEYE=m
#
# Media capture/analog TV support
#CONFIG_VIDEO_IVTV=mCONFIG_VIDEO_IVTV_ALSA=mCONFIG_VIDEO_FB_IVTV=mCONFIG_VIDEO_ZORAN=mCONFIG_VIDEO_ZORAN_DC30=mCONFIG_VIDEO_ZORAN_ZR36060=mCONFIG_VIDEO_ZORAN_BUZ=mCONFIG_VIDEO_ZORAN_DC10=mCONFIG_VIDEO_ZORAN_LML33=mCONFIG_VIDEO_ZORAN_LML33R10=mCONFIG_VIDEO_ZORAN_AVS6EYES=mCONFIG_VIDEO_HEXIUM_GEMINI=mCONFIG_VIDEO_HEXIUM_ORION=mCONFIG_VIDEO_MXB=m
#
# Media capture/analog/hybrid TV support
#CONFIG_VIDEO_CX18=mCONFIG_VIDEO_CX18_ALSA=mCONFIG_VIDEO_CX23885=mCONFIG_MEDIA_ALTERA_CI=mCONFIG_VIDEO_CX25821=mCONFIG_VIDEO_CX25821_ALSA=mCONFIG_VIDEO_CX88=mCONFIG_VIDEO_CX88_ALSA=mCONFIG_VIDEO_CX88_BLACKBIRD=mCONFIG_VIDEO_CX88_DVB=mCONFIG_VIDEO_CX88_VP3054=mCONFIG_VIDEO_CX88_MPEG=mCONFIG_VIDEO_BT848=mCONFIG_DVB_BT8XX=mCONFIG_VIDEO_SAA7134=mCONFIG_VIDEO_SAA7134_ALSA=mCONFIG_VIDEO_SAA7134_RC=yCONFIG_VIDEO_SAA7134_DVB=mCONFIG_VIDEO_SAA7164=m
#
# Media digital TV PCI Adapters
#CONFIG_DVB_AV7110=mCONFIG_DVB_AV7110_OSD=yCONFIG_DVB_BUDGET_CORE=mCONFIG_DVB_BUDGET=mCONFIG_DVB_BUDGET_CI=mCONFIG_DVB_BUDGET_AV=mCONFIG_DVB_BUDGET_PATCH=mCONFIG_DVB_B2C2_FLEXCOP_PCI=m
# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not setCONFIG_DVB_PLUTO2=mCONFIG_DVB_DM1105=mCONFIG_DVB_PT1=mCONFIG_MANTIS_CORE=mCONFIG_DVB_MANTIS=mCONFIG_DVB_HOPPER=mCONFIG_DVB_NGENE=mCONFIG_DVB_DDBRIDGE=mCONFIG_V4L_PLATFORM_DRIVERS=yCONFIG_VIDEO_CAFE_CCIC=mCONFIG_VIDEO_VIA_CAMERA=mCONFIG_VIDEO_TIMBERDALE=mCONFIG_SOC_CAMERA=mCONFIG_SOC_CAMERA_PLATFORM=mCONFIG_VIDEO_SH_MOBILE_CSI2=mCONFIG_VIDEO_SH_MOBILE_CEU=mCONFIG_V4L_MEM2MEM_DRIVERS=yCONFIG_VIDEO_MEM2MEM_DEINTERLACE=mCONFIG_VIDEO_SH_VEU=mCONFIG_V4L_TEST_DRIVERS=yCONFIG_VIDEO_VIVI=mCONFIG_VIDEO_MEM2MEM_TESTDEV=m
#
# Supported MMC/SDIO adapters
#CONFIG_SMS_SDIO_DRV=mCONFIG_MEDIA_PARPORT_SUPPORT=yCONFIG_VIDEO_BWQCAM=mCONFIG_VIDEO_CQCAM=mCONFIG_VIDEO_W9966=mCONFIG_RADIO_ADAPTERS=yCONFIG_RADIO_SI470X=yCONFIG_USB_SI470X=mCONFIG_I2C_SI470X=mCONFIG_RADIO_SI476X=mCONFIG_USB_MR800=mCONFIG_USB_DSBR=mCONFIG_RADIO_MAXIRADIO=mCONFIG_RADIO_SHARK=mCONFIG_RADIO_SHARK2=mCONFIG_I2C_SI4713=mCONFIG_RADIO_SI4713=mCONFIG_USB_KEENE=mCONFIG_USB_MA901=mCONFIG_RADIO_TEA5764=mCONFIG_RADIO_SAA7706H=mCONFIG_RADIO_TEF6862=mCONFIG_RADIO_TIMBERDALE=mCONFIG_RADIO_WL1273=m
#
# Texas Instruments WL128x FM driver (ST based)
#CONFIG_RADIO_WL128X=m
#
# Supported FireWire (IEEE 1394) Adapters
#CONFIG_DVB_FIREDTV=mCONFIG_DVB_FIREDTV_INPUT=yCONFIG_MEDIA_COMMON_OPTIONS=y
#
# common driver options # CONFIG_VIDEO_CX2341X=m CONFIG_VIDEO_BTCX=m CONFIG_VIDEO_TVEEPROM=m CONFIG_CYPRESS_FIRMWARE=m CONFIG_DVB_B2C2_FLEXCOP=m CONFIG_VIDEO_SAA7146=m CONFIG_VIDEO_SAA7146_VV=m CONFIG_SMS_SIANO_MDTV=m CONFIG_SMS_SIANO_RC=y CONFIG_SMS_SIANO_DEBUGFS=y
#
# Media ancillary drivers (tuners, sensors, i2c, frontends) #CONFIG_MEDIA_SUBDRV_AUTOSELECT=y CONFIG_MEDIA_ATTACH=yCONFIG_VIDEO_IR_I2C=m
#
# Audio decoders, processors and mixers
#CONFIG_VIDEO_TVAUDIO=mCONFIG_VIDEO_TDA7432=mCONFIG_VIDEO_TDA9840=mCONFIG_VIDEO_TEA6415C=mCONFIG_VIDEO_TEA6420=mCONFIG_VIDEO_MSP3400=mCONFIG_VIDEO_CS5345=mCONFIG_VIDEO_CS53L32A=mCONFIG_VIDEO_UDA1342=mCONFIG_VIDEO_WM8775=mCONFIG_VIDEO_WM8739=mCONFIG_VIDEO_VP27SMPX=mCONFIG_VIDEO_SONY_BTF_MPX=m
#
# RDS decoders
#CONFIG_VIDEO_SAA6588=m
#
# Video decoders
#CONFIG_VIDEO_ADV7180=mCONFIG_VIDEO_BT819=mCONFIG_VIDEO_BT856=mCONFIG_VIDEO_BT866=mCONFIG_VIDEO_KS0127=mCONFIG_VIDEO_SAA7110=mCONFIG_VIDEO_SAA711X=mCONFIG_VIDEO_TVP5150=mCONFIG_VIDEO_TW2804=mCONFIG_VIDEO_TW9903=mCONFIG_VIDEO_TW9906=mCONFIG_VIDEO_VPX3220=m
#
# Video and audio decoders
#CONFIG_VIDEO_SAA717X=mCONFIG_VIDEO_CX25840=m
#
# Video encoders
#CONFIG_VIDEO_SAA7127=mCONFIG_VIDEO_SAA7185=mCONFIG_VIDEO_ADV7170=mCONFIG_VIDEO_ADV7175=m
#
# Camera sensor devices
#CONFIG_VIDEO_OV7640=mCONFIG_VIDEO_OV7670=mCONFIG_VIDEO_MT9V011=m
#
# Flash devices
#
#
# Video improvement chips
#CONFIG_VIDEO_UPD64031A=mCONFIG_VIDEO_UPD64083=m
#
# Miscelaneous helper chips
#CONFIG_VIDEO_M52790=m
#
# Sensors used on soc_camera driver
#
#
# soc_camera sensor drivers # CONFIG_SOC_CAMERA_IMX074=m CONFIG_SOC_CAMERA_MT9M001=m CONFIG_SOC_CAMERA_MT9M111=m CONFIG_SOC_CAMERA_MT9T031=m CONFIG_SOC_CAMERA_MT9T112=m CONFIG_SOC_CAMERA_MT9V022=m CONFIG_SOC_CAMERA_OV2640=m CONFIG_SOC_CAMERA_OV5642=m CONFIG_SOC_CAMERA_OV6650=m CONFIG_SOC_CAMERA_OV772X=m CONFIG_SOC_CAMERA_OV9640=m CONFIG_SOC_CAMERA_OV9740=m CONFIG_SOC_CAMERA_RJ54N1=m CONFIG_SOC_CAMERA_TW9910=m CONFIG_MEDIA_TUNER=m CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=m CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_MT2060=m CONFIG_MEDIA_TUNER_MT2063=m CONFIG_MEDIA_TUNER_MT2266=m CONFIG_MEDIA_TUNER_MT2131=m CONFIG_MEDIA_TUNER_QT1010=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_XC4000=m CONFIG_MEDIA_TUNER_MXL5005S=m CONFIG_MEDIA_TUNER_MXL5007T=m CONFIG_MEDIA_TUNER_MC44S803=m CONFIG_MEDIA_TUNER_MAX2165=m CONFIG_MEDIA_TUNER_TDA18218=m CONFIG_MEDIA_TUNER_FC0011=m CONFIG_MEDIA_TUNER_FC0012=m CONFIG_MEDIA_TUNER_FC0013=m CONFIG_MEDIA_TUNER_TDA18212=m CONFIG_MEDIA_TUNER_E4000=m CONFIG_MEDIA_TUNER_FC2580=m CONFIG_MEDIA_TUNER_TUA9001=m CONFIG_MEDIA_TUNER_IT913X=m CONFIG_MEDIA_TUNER_R820T=m
#
# Multistandard (satellite) frontends
#CONFIG_DVB_STB0899=mCONFIG_DVB_STB6100=m
CONFIG_DVB_STV090x=m
CONFIG_DVB_STV6110x=m
#
# Multistandard (cable + terrestrial) frontends
#CONFIG_DVB_DRXK=mCONFIG_DVB_TDA18271C2DD=m
#
# DVB-S (satellite) frontends
#CONFIG_DVB_CX24110=mCONFIG_DVB_CX24123=mCONFIG_DVB_MT312=mCONFIG_DVB_ZL10036=mCONFIG_DVB_ZL10039=mCONFIG_DVB_S5H1420=mCONFIG_DVB_STV0288=mCONFIG_DVB_STB6000=mCONFIG_DVB_STV0299=mCONFIG_DVB_STV6110=mCONFIG_DVB_STV0900=mCONFIG_DVB_TDA8083=mCONFIG_DVB_TDA10086=mCONFIG_DVB_TDA8261=mCONFIG_DVB_VES1X93=mCONFIG_DVB_TUNER_ITD1000=mCONFIG_DVB_TUNER_CX24113=mCONFIG_DVB_TDA826X=mCONFIG_DVB_TUA6100=mCONFIG_DVB_CX24116=mCONFIG_DVB_SI21XX=mCONFIG_DVB_TS2020=mCONFIG_DVB_DS3000=mCONFIG_DVB_MB86A16=mCONFIG_DVB_TDA10071=m
#
# DVB-T (terrestrial) frontends
#CONFIG_DVB_SP8870=mCONFIG_DVB_SP887X=mCONFIG_DVB_CX22700=mCONFIG_DVB_CX22702=mCONFIG_DVB_DRXD=mCONFIG_DVB_L64781=mCONFIG_DVB_TDA1004X=mCONFIG_DVB_NXT6000=mCONFIG_DVB_MT352=mCONFIG_DVB_ZL10353=mCONFIG_DVB_DIB3000MB=mCONFIG_DVB_DIB3000MC=mCONFIG_DVB_DIB7000M=mCONFIG_DVB_DIB7000P=mCONFIG_DVB_TDA10048=mCONFIG_DVB_AF9013=mCONFIG_DVB_EC100=mCONFIG_DVB_STV0367=mCONFIG_DVB_CXD2820R=mCONFIG_DVB_RTL2830=mCONFIG_DVB_RTL2832=m
#
# DVB-C (cable) frontends
#CONFIG_DVB_VES1820=mCONFIG_DVB_TDA10021=mCONFIG_DVB_TDA10023=mCONFIG_DVB_STV0297=m
2,564 lines not shown · raw message
Part of this message is not shown here. View the raw message.
Viresh Kumar
maintainerQuoted 14 lines · Tim Gardner
This is from Ubuntu Saucy based on 3.10-rc7:
[ 12.911676] BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 [ 12.911691] IP: [<ffffffff8156e572>] od_set_powersave_bias+0x92/0xc0For completeness I added the attached debug patch and built a vanilla 3.10-rc7 with the following result:
[ 13.222262] od_set_powersave_bias !policy, cpu 0 [ 13.222843] od_set_powersave_bias !policy, cpu 1 [ 13.223380] od_set_powersave_bias !policy, cpu 2 [ 13.223922] od_set_powersave_bias !policy, cpu 3
Quoted 5 lines
Attachments:
dmesg.txt - ubuntu kernel rebased on 3.10-rc7 dmesg_dbg.txt - vanilla 3.10-rc7 with debug patch 0001-cpufreq_ondemand.c-Added-debug.patch - debug patch config - 3.10-rc7 config
Can you please look into this bug? It occurred after your patch... This is the boot log crash we have:
I believe this is somehow called before ondemand is initialized. Also, I see one problem in your original patch:
commit fb30809efa3edeb692a6b29125a07c9eceb322dc
Author: Jacob Shin <[email protected]> Date: Tue Apr 2 09:56:56 2013 -0500
cpufreq: ondemand: allow custom powersave_bias_target handler to
be registered
You are doing:
+ for_each_online_cpu(cpu) {
+ if (cpumask_test_cpu(cpu, &done))
+ continue;
+
+ policy = per_cpu(od_cpu_dbs_info, cpu).cdbs.cur_policy; + dbs_data = policy->governor_data; + od_tuners = dbs_data->tuners; + od_tuners->powersave_bias = powersave_bias;
+
+ cpumask_or(&done, &done, policy->cpus);
+ }
How can we do this for each online cpu? There might be two clusters each using a separate governor and so this looks wrong. Can you please send a fixup for this?
[ 12.911719] Modules linked in: amd_freq_sensitivity(+) kvm_amd kvm
snd_hda_intel(+) snd_hda_codec crc32_pclmul ghash_clmulni_intel snd_hwdep snd_pcm aesni_intel ablk_helper snd_seq_midi cryptd lrw snd_rawmidi snd_seq_midi_event gf128mul snd_seq glue_helper aes_x86_64 snd_timer snd_seq_device psmouse edac_core snd joydev microcode i2c_piix4 soundcore snd_page_alloc video edac_mce_amd bcma mac_hid fam15h_power serio_raw lp parport hid_generic usbhid hid sdhci_pci sdhci ahci libahci alx mdio
[ 12.911782] CPU: 0 PID: 605 Comm: modprobe Not tainted 3.10.0-0-generic #6 [ 12.911789] Hardware name: AMD Larne/Larne, BIOS WLR3206X_Weekly_13_02_0 02/06/2013 [ 12.911795] task: ffff880115cd2ee0 ti: ffff880118140000 task.ti: ffff880118140000 [ 12.911800] RIP: 0010:[<ffffffff8156e572>] [<ffffffff8156e572>] od_set_powersave_bias+0x92/0xc0 [ 12.911809] RSP: 0018:ffff880118141d00 EFLAGS: 00010246 [ 12.911814] RAX: ffff88011ec00000 RBX: 0000000000000000 RCX: 0000000000000100 [ 12.911819] RDX: 0000000000000000 RSI: ffff880118141d00 RDI: ffff880118141d00 [ 12.911824] RBP: ffff880118141d40 R08: ffffffff81cf2ee0 R09: 0000000000000004 [ 12.911829] R10: ffff88011ec14fc8 R11: 0000000000014480 R12: ffffffff81cf2ee0 [ 12.911835] R13: 0000000000010c80 R14: 0000000000000190 R15: ffff880118141ef0 [ 12.911842] FS: 00007f0688e8d700(0000) GS:ffff88011ec00000(0000) knlGS:0000000000000000 [ 12.911849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 12.911854] CR2: 0000000000000070 CR3: 0000000115cc4000 CR4: 00000000000407f0 [ 12.911860] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 12.911866] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 12.911871] Stack: [ 12.911875] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 12.911885] 0000000000000000 0000000000000000 ffffffffa0280000 ffffffffa0280018 [ 12.911894] ffff880118141d50 ffffffff8156e5b7 ffff880118141d70 ffffffffa001e046 [ 12.911904] Call Trace: [ 12.911914] [<ffffffff8156e5b7>] od_register_powersave_bias_handler+0x17/0x20 [ 12.911925] [<ffffffffa001e046>] amd_freq_sensitivity_init+0x46/0x1000 [amd_freq_sensitivity] [ 12.911935] [<ffffffffa001e000>] ? 0xffffffffa001dfff [ 12.911945] [<ffffffff81002102>] do_one_initcall+0x102/0x160 [ 12.911955] [<ffffffff810bee8c>] load_module+0x101c/0x1400 [ 12.911964] [<ffffffff810baa40>] ? store_uevent+0x40/0x40 [ 12.911973] [<ffffffff810bf31d>] SyS_init_module+0xad/0xd0 [ 12.911983] [<ffffffff816defef>] tracesys+0xe1/0xe6 [ 12.911988] Code: 78 00 89 c3 76 3b 0f a3 45 c0 19 d2 85 d2 75 d9 89 c0 48 8d 75 c0 b9 00 01 00 00 48 8b 04 c5 80 21 cf 81 48 89 f7 49 8b 54 05 20 <48> 8b 42 70 48 8b 40 10 44 89 70 14 e8 bd d5 dd ff eb ab 0f 1f [ 12.912054] RIP [<ffffffff8156e572>] od_set_powersave_bias+0x92/0xc0 [ 12.912062] RSP <ffff880118141d00> [ 12.912066] CR2: 0000000000000070 [ 12.912073] ---[ end trace 98b1cd8b10d00b40 ]--- [ 13.025093] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9 [ 13.025267] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input10 [ 13.025892] hda-intel 0000:00:14.2: Using LPIB position fix [ 13.030414] hda-intel 0000:00:14.2: Enable sync_write for stable communication [ 13.055253] hda_codec: CX20751/2: BIOS auto-probing. [ 13.055499] autoconfig: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 13.055506] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 13.055512] hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 13.055516] mono: mono_out=0x0 [ 13.055520] inputs: [ 13.055525] Internal Mic=0x1a [ 13.055530] Mic=0x18
Quoted 10 lines · Viresh Kumar
Quoted 6 lines · Tim Gardner
This is from Ubuntu Saucy based on 3.10-rc7:
[ 12.911676] BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 [ 12.911691] IP: [<ffffffff8156e572>] od_set_powersave_bias+0x92/0xc0Can you please look into this bug? It occurred after your patch... This is the boot log crash we have:
Hi,
Yes, so sorry about that, it looks like I failed to test with:
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_ONDEMAND=yCONFIG_X86_AMD_FREQ_SENSITIVITY=m
The following patch fixes this, Tim, could you please test ? :
---8<---
From 3c727b1f775448599e67c5fb2121d79448e80c90 Mon Sep 17 00:00:00 2001
From: Jacob Shin <[email protected]>
Date: Tue, 25 Jun 2013 10:40:54 -0500
Subject: [PATCH 1/1] cpufreq: fix NULL pointer deference at
od_set_powersave_bias()
When initializing the default powersave_bias value, we need to first make sure that this policy is running the ondemand governor.
--- drivers/cpufreq/cpufreq_ondemand.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)
drivers/cpufreq/cpufreq_ondemand.c +13 -4
@@ -47,6 +47,8 @@ static struct od_ops od_ops;static struct cpufreq_governor cpufreq_gov_ondemand;#endif +static unsigned int default_powersave_bias; +static void ondemand_powersave_bias_init_cpu (int cpu) {struct od_cpu_dbs_info_s *dbs_info = &per_cpu (od_cpu_dbs_info, cpu);
@@ -543,7 +545,7 @@ static int od_init(struct dbs_data *dbs_data) tuners->sampling_down_factor =DEF_SAMPLING_DOWN_FACTOR ; tuners->ignore_nice =0 ; - tuners->powersave_bias =0 ; + tuners->powersave_bias = default_powersave_bias; tuners->io_is_busy =should_io_be_busy (); dbs_data->tuners = tuners;
@@ -585,6 +587,7 @@ static void od_set_powersave_bias(unsigned int powersave_bias)unsigned int cpu;cpumask_t done; + default_powersave_bias = powersave_bias;cpumask_clear (&done);get_online_cpus ();
@@ -593,11 +596,17 @@ static void od_set_powersave_bias(unsigned int powersave_bias)continue ; policy =per_cpu (od_cpu_dbs_info, cpu).cdbs.cur_policy; - dbs_data = policy->governor_data; - od_tuners = dbs_data->tuners; - od_tuners->powersave_bias = powersave_bias; +if (!policy) +continue ;cpumask_or (&done, &done, policy->cpus); + +if (policy->governor != &cpufreq_gov_ondemand) +continue ; + + dbs_data = policy->governor_data; + od_tuners = dbs_data->tuners; + od_tuners->powersave_bias = default_powersave_bias; }put_online_cpus (); }
Signature · 1 line
1.7.9.5
Quoted 82 lines · Jacob Shin
Quoted 10 lines · Viresh Kumar
Quoted 6 lines · Tim Gardner
This is from Ubuntu Saucy based on 3.10-rc7:
[ 12.911676] BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 [ 12.911691] IP: [<ffffffff8156e572>] od_set_powersave_bias+0x92/0xc0Can you please look into this bug? It occurred after your patch... This is the boot log crash we have:
Hi,
Yes, so sorry about that, it looks like I failed to test with:
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_ONDEMAND=yCONFIG_X86_AMD_FREQ_SENSITIVITY=mThe following patch fixes this, Tim, could you please test ? :
---8<---
From
3c727b1f775448599e67c5fb2121d79448e80c90Mon Sep 17 00:00:00 2001
From: Jacob Shin <[email protected]>
Date: Tue, 25 Jun 2013 10:40:54 -0500
Subject: [PATCH 1/1] cpufreq: fix NULL pointer deference at
od_set_powersave_bias()When initializing the default
powersave_biasvalue, we need to first make sure that this policy is running the ondemand governor.Reported-by Tim Gardner <[email protected]>Signed-off-by Jacob Shin <[email protected]>--- drivers/cpufreq/cpufreq_ondemand.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)drivers/cpufreq/cpufreq_ondemand.c +6
-4@@ -47,6 +47,8 @@ static struct od_ops od_ops;static struct cpufreq_governor cpufreq_gov_ondemand;#endif +static unsigned int default_powersave_bias; +static void ondemand_powersave_bias_init_cpu (int cpu) {struct od_cpu_dbs_info_s *dbs_info = &per_cpu (od_cpu_dbs_info, cpu);@@ -543,7 +545,7 @@ static int od_init(struct dbs_data *dbs_data) tuners->sampling_down_factor =DEF_SAMPLING_DOWN_FACTOR ; tuners->ignore_nice =0 ; - tuners->powersave_bias =0 ; + tuners->powersave_bias = default_powersave_bias; tuners->io_is_busy =should_io_be_busy (); dbs_data->tuners = tuners;@@ -585,6 +587,7 @@ static void od_set_powersave_bias(unsigned int powersave_bias)unsigned int cpu;cpumask_t done; + default_powersave_bias = powersave_bias;cpumask_clear (&done);get_online_cpus ();@@ -593,11 +596,17 @@ static void od_set_powersave_bias(unsigned int powersave_bias)continue ; policy =per_cpu (od_cpu_dbs_info, cpu).cdbs.cur_policy; - dbs_data = policy->governor_data; - od_tuners = dbs_data->tuners; - od_tuners->powersave_bias = powersave_bias; +if (!policy) +continue ;cpumask_or (&done, &done, policy->cpus);
drivers/cpufreq/cpufreq_ondemand.c static void od_set_powersave_bias(unsigned int powersave_bias) · line 612
Quoted 10 lines
drivers/cpufreq/cpufreq_ondemand.c +7
-0+ +if (policy->governor != &cpufreq_gov_ondemand) +continue ; + + dbs_data = policy->governor_data; + od_tuners = dbs_data->tuners; + od_tuners->powersave_bias = default_powersave_bias; }put_online_cpus (); }
That appears to have done the trick. You can add my Tested-by.
rtg
Signature · 1 line
Tim Gardner [email protected]
Quoted 81 lines · Tim Gardner
Quoted 80 lines · Jacob Shin
Quoted 10 lines · Viresh Kumar
Quoted 6 lines · Tim Gardner
This is from Ubuntu Saucy based on 3.10-rc7:
[ 12.911676] BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 [ 12.911691] IP: [<ffffffff8156e572>] od_set_powersave_bias+0x92/0xc0Can you please look into this bug? It occurred after your patch... This is the boot log crash we have:
Hi,
Yes, so sorry about that, it looks like I failed to test with:
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_ONDEMAND=yCONFIG_X86_AMD_FREQ_SENSITIVITY=mThe following patch fixes this, Tim, could you please test ? :
---8<---
From
3c727b1f775448599e67c5fb2121d79448e80c90Mon Sep 17 00:00:00 2001
From: Jacob Shin <[email protected]>
Date: Tue, 25 Jun 2013 10:40:54 -0500
Subject: [PATCH 1/1] cpufreq: fix NULL pointer deference at
od_set_powersave_bias()When initializing the default
powersave_biasvalue, we need to first make sure that this policy is running the ondemand governor.Reported-by Tim Gardner <[email protected]>Signed-off-by Jacob Shin <[email protected]>--- drivers/cpufreq/cpufreq_ondemand.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)drivers/cpufreq/cpufreq_ondemand.c +6
-4@@ -47,6 +47,8 @@ static struct od_ops od_ops;static struct cpufreq_governor cpufreq_gov_ondemand;#endif +static unsigned int default_powersave_bias; +static void ondemand_powersave_bias_init_cpu (int cpu) {struct od_cpu_dbs_info_s *dbs_info = &per_cpu (od_cpu_dbs_info, cpu);@@ -543,7 +545,7 @@ static int od_init(struct dbs_data *dbs_data) tuners->sampling_down_factor =DEF_SAMPLING_DOWN_FACTOR ; tuners->ignore_nice =0 ; - tuners->powersave_bias =0 ; + tuners->powersave_bias = default_powersave_bias; tuners->io_is_busy =should_io_be_busy (); dbs_data->tuners = tuners;@@ -585,6 +587,7 @@ static void od_set_powersave_bias(unsigned int powersave_bias)unsigned int cpu;cpumask_t done; + default_powersave_bias = powersave_bias;cpumask_clear (&done);get_online_cpus ();@@ -593,11 +596,17 @@ static void od_set_powersave_bias(unsigned int powersave_bias)continue ; policy =per_cpu (od_cpu_dbs_info, cpu).cdbs.cur_policy; - dbs_data = policy->governor_data; - od_tuners = dbs_data->tuners; - od_tuners->powersave_bias = powersave_bias; +if (!policy) +continue ;
Quoted 14 lines
drivers/cpufreq/cpufreq_ondemand.c static void od_set_powersave_bias(unsigned int powersave_bias) · line 612
Quoted 12 lines
drivers/cpufreq/cpufreq_ondemand.c +7
-0cpumask_or (&done, &done, policy->cpus); + +if (policy->governor != &cpufreq_gov_ondemand) +continue ; + + dbs_data = policy->governor_data; + od_tuners = dbs_data->tuners; + od_tuners->powersave_bias = default_powersave_bias; }put_online_cpus (); }That appears to have done the trick. You can add my Tested-by.
Queued up as an urgent fix.
Thanks,
Rafael
Signature · 2 lines
I speak only for myself. Rafael J. Wysocki, Intel Open Source Technology Center.
Viresh Kumar
maintainerQuoted 1 line · Jacob Shin
Yes, so sorry about that, it looks like I failed to test with:
No problem, it happens :)
Quoted 47 lines
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_ONDEMAND=yCONFIG_X86_AMD_FREQ_SENSITIVITY=mThe following patch fixes this, Tim, could you please test ? :
---8<---
From
3c727b1f775448599e67c5fb2121d79448e80c90Mon Sep 17 00:00:00 2001
From: Jacob Shin <[email protected]>
Date: Tue, 25 Jun 2013 10:40:54 -0500
Subject: [PATCH 1/1] cpufreq: fix NULL pointer deference at
od_set_powersave_bias()When initializing the default
powersave_biasvalue, we need to first make sure that this policy is running the ondemand governor.Reported-by Tim Gardner <[email protected]>Signed-off-by Jacob Shin <[email protected]>--- drivers/cpufreq/cpufreq_ondemand.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)drivers/cpufreq/cpufreq_ondemand.c +3
-1@@ -47,6 +47,8 @@ static struct od_ops od_ops;static struct cpufreq_governor cpufreq_gov_ondemand;#endif +static unsigned int default_powersave_bias; +static void ondemand_powersave_bias_init_cpu (int cpu) {struct od_cpu_dbs_info_s *dbs_info = &per_cpu (od_cpu_dbs_info, cpu);@@ -543,7 +545,7 @@ static int od_init(struct dbs_data *dbs_data) tuners->sampling_down_factor =DEF_SAMPLING_DOWN_FACTOR ; tuners->ignore_nice =0 ; - tuners->powersave_bias =0 ; + tuners->powersave_bias = default_powersave_bias; tuners->io_is_busy =should_io_be_busy (); dbs_data->tuners = tuners;
drivers/cpufreq/cpufreq_ondemand.c static void od_set_powersave_bias(unsigned int powersave_bias) · line 590
Quoted 4 lines
drivers/cpufreq/cpufreq_ondemand.c +1
-0@@ -585,6 +587,7 @@ static void od_set_powersave_bias(unsigned int powersave_bias)unsigned int cpu;cpumask_t done; + default_powersave_bias = powersave_bias;
Why are the above three changes required? And in case they are, then they must have been commited separately.
drivers/cpufreq/cpufreq_ondemand.c static void od_set_powersave_bias(unsigned int powersave_bias) · line 600
Quoted 12 lines
drivers/cpufreq/cpufreq_ondemand.c +2
-3cpumask_clear (&done);get_online_cpus ();@@ -593,11 +596,17 @@ static void od_set_powersave_bias(unsigned int powersave_bias)continue ; policy =per_cpu (od_cpu_dbs_info, cpu).cdbs.cur_policy; - dbs_data = policy->governor_data; - od_tuners = dbs_data->tuners; - od_tuners->powersave_bias = powersave_bias; +if (!policy) +continue ;
I am not sure if this is enough. What if we had ondemand as the governor initially, then we changed it to something else. Now also cur_policy contains a address and isn't zero.
Quoted 15 lines
drivers/cpufreq/cpufreq_ondemand.c +7
-1cpumask_or (&done, &done, policy->cpus); + +if (policy->governor != &cpufreq_gov_ondemand) +continue ; + + dbs_data = policy->governor_data; + od_tuners = dbs_data->tuners; + od_tuners->powersave_bias = default_powersave_bias; }put_online_cpus (); } --1.7.9.5
Quoted 66 lines · Viresh Kumar
Quoted 1 line · Jacob Shin
Yes, so sorry about that, it looks like I failed to test with:
No problem, it happens :)
Quoted 47 lines
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_ONDEMAND=yCONFIG_X86_AMD_FREQ_SENSITIVITY=mThe following patch fixes this, Tim, could you please test ? :
---8<---
From
3c727b1f775448599e67c5fb2121d79448e80c90Mon Sep 17 00:00:00 2001
From: Jacob Shin <[email protected]>
Date: Tue, 25 Jun 2013 10:40:54 -0500
Subject: [PATCH 1/1] cpufreq: fix NULL pointer deference at
od_set_powersave_bias()When initializing the default
powersave_biasvalue, we need to first make sure that this policy is running the ondemand governor.Reported-by Tim Gardner <[email protected]>Signed-off-by Jacob Shin <[email protected]>--- drivers/cpufreq/cpufreq_ondemand.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)drivers/cpufreq/cpufreq_ondemand.c +3
-1@@ -47,6 +47,8 @@ static struct od_ops od_ops;static struct cpufreq_governor cpufreq_gov_ondemand;#endif +static unsigned int default_powersave_bias; +static void ondemand_powersave_bias_init_cpu (int cpu) {struct od_cpu_dbs_info_s *dbs_info = &per_cpu (od_cpu_dbs_info, cpu);@@ -543,7 +545,7 @@ static int od_init(struct dbs_data *dbs_data) tuners->sampling_down_factor =DEF_SAMPLING_DOWN_FACTOR ; tuners->ignore_nice =0 ; - tuners->powersave_bias =0 ; + tuners->powersave_bias = default_powersave_bias; tuners->io_is_busy =should_io_be_busy (); dbs_data->tuners = tuners;drivers/cpufreq/cpufreq_ondemand.c static void od_set_powersave_bias(unsigned int powersave_bias) · line 590
Quoted 4 lines
drivers/cpufreq/cpufreq_ondemand.c +1
-0@@ -585,6 +587,7 @@ static void od_set_powersave_bias(unsigned int powersave_bias)unsigned int cpu;cpumask_t done; + default_powersave_bias = powersave_bias;Why are the above three changes required? And in case they are, then they must have been commited separately.
Quoted 6 lines
drivers/cpufreq/cpufreq_ondemand.c +0
-0cpumask_clear (&done);get_online_cpus ();@@ -593,11 +596,17 @@ static void od_set_powersave_bias(unsigned int powersave_bias)continue ;
Quoted 10 lines
drivers/cpufreq/cpufreq_ondemand.c static void od_set_powersave_bias(unsigned int powersave_bias) · line 600
Quoted 6 lines
drivers/cpufreq/cpufreq_ondemand.c +2
-3policy =per_cpu (od_cpu_dbs_info, cpu).cdbs.cur_policy; - dbs_data = policy->governor_data; - od_tuners = dbs_data->tuners; - od_tuners->powersave_bias = powersave_bias; +if (!policy) +continue ;I am not sure if this is enough. What if we had ondemand as the governor initially, then we changed it to something else. Now also
cur_policycontains a address and isn't zero.
Right, so we check below ..
Quoted 5 lines
drivers/cpufreq/cpufreq_ondemand.c static void od_set_powersave_bias(unsigned int powersave_bias) · line 605
Quoted 5 lines
drivers/cpufreq/cpufreq_ondemand.c +3
-0cpumask_or (&done, &done, policy->cpus); + +if (policy->governor != &cpufreq_gov_ondemand) +continue ;
This should catch that case no ?
Quoted 16 lines
Quoted 11 lines
drivers/cpufreq/cpufreq_ondemand.c +4
-1+ + dbs_data = policy->governor_data; + od_tuners = dbs_data->tuners; + od_tuners->powersave_bias = default_powersave_bias; }put_online_cpus (); } --1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe cpufreq" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Viresh Kumar
maintainerQuoted 9 lines · Jacob Shin
Quoted 3 lines · Viresh Kumar
I am not sure if this is enough. What if we had ondemand as the governor initially, then we changed it to something else. Now also
cur_policycontains a address and isn't zero.Right, so we check below ..
Quoted 1 line
Quoted 6 lines
Quoted 4 lines
drivers/cpufreq/cpufreq_ondemand.c static void od_set_powersave_bias(unsigned int powersave_bias) · line 605
Quoted 4 lines
cpumask_or(&done, &done, policy->cpus);drivers/cpufreq/cpufreq_ondemand.c +3
-0+ +if (policy->governor != &cpufreq_gov_ondemand) +continue ;This should catch that case no ?
Policy might be freed and reallocated by then. And so doing policy->governor is dangerous.
Quoted 15 lines · Viresh Kumar
Quoted 14 lines · Jacob Shin
Quoted 3 lines · Viresh Kumar
I am not sure if this is enough. What if we had ondemand as the governor initially, then we changed it to something else. Now also
cur_policycontains a address and isn't zero.Right, so we check below ..
Quoted 5 lines
Quoted 5 lines
cpumask_or(&done, &done, policy->cpus);drivers/cpufreq/cpufreq_ondemand.c +3
-0+ +if (policy->governor != &cpufreq_gov_ondemand) +continue ;
Quoted 4 lines
Quoted 1 line
This should catch that case no ?
Policy might be freed and reallocated by then. And so doing
policy->governoris dangerous.
Hm . any hints on how to check for if ondemand is running on this CPU or not ? I'm not sure what the best way to handle this is ..
Thanks,
Quoted 6 lines · Viresh Kumar
Quoted 5 lines · Jacob Shin
Quoted 3 lines · Viresh Kumar
I am not sure if this is enough. What if we had ondemand as the governor initially, then we changed it to something else. Now also
cur_policycontains a address and isn't zero.
I just tested this case with this patch applied, and did not have any problems.
Quoted 10 lines
Quoted 7 lines
Quoted 5 lines
drivers/cpufreq/cpufreq_ondemand.c static void od_set_powersave_bias(unsigned int powersave_bias) · line 605
Quoted 5 lines
cpumask_or(&done, &done, policy->cpus);drivers/cpufreq/cpufreq_ondemand.c +3
-0+ +if (policy->governor != &cpufreq_gov_ondemand) +continue ;This should catch that case no ?
Policy might be freed and reallocated by then. And so doing
policy->governoris dangerous.
Are you worried that after we have passed the above if check, and before we access ->tuner governor change might occur?
Is there something synonymous to get/put_online_cpus() for cpufreq to prevent governor change while we update ->tuner values?
Otherwise, should just spinlock?
Viresh Kumar
maintainerQuoted 10 lines · Jacob Shin
Quoted 6 lines · Viresh Kumar
Quoted 5 lines · Jacob Shin
Quoted 3 lines · Viresh Kumar
I am not sure if this is enough. What if we had ondemand as the governor initially, then we changed it to something else. Now also
cur_policycontains a address and isn't zero.I just tested this case with this patch applied, and did not have any problems.
Try this:
- you need a system with multiple policy groups to test it
- Suppose we have two groups of CPUs: 0 and 1
- Set ondemand as governor for both
- change governor of group 1 to something else (we still have valid policy struct in Ondemand)
- offline all CPUs from group 1. this will free struct cpufreq_policy
- Online these CPUs back, this will reallocate policy
- Now run this function, the earlier policy struct is already freed and you are accessing it here.
Quoted 10 lines
Quoted 9 lines
Quoted 6 lines
Quoted 4 lines
drivers/cpufreq/cpufreq_ondemand.c static void od_set_powersave_bias(unsigned int powersave_bias) · line 605
Quoted 4 lines
cpumask_or(&done, &done, policy->cpus);drivers/cpufreq/cpufreq_ondemand.c +3
-0+ +if (policy->governor != &cpufreq_gov_ondemand) +continue ;This should catch that case no ?
Policy might be freed and reallocated by then. And so doing
policy->governoris dangerous.
Quoted 7 lines
Are you worried that after we have passed the above if check, and before we access ->tuner governor change might occur?
Is there something synonymous to get/put_online_cpus() for cpufreq to prevent governor change while we update ->tuner values?
Otherwise, should just spinlock?
No, i wasn't worrying about this but a sequence of events that I told to you earlier.
Replying to your other mail:
Quoted 2 lines
Hm . any hints on how to check for if ondemand is running on this CPU or not ? I'm not sure what the best way to handle this is ..
Make cur_policy zero in cpufreq_governor_dbs() for CPUFREQ_GOV_STOP notification. This will make sure we use correct policy pointer.
Quoted 12 lines · Viresh Kumar
Quoted 10 lines · Jacob Shin
Quoted 6 lines · Viresh Kumar
Quoted 5 lines · Jacob Shin
Quoted 3 lines · Viresh Kumar
I am not sure if this is enough. What if we had ondemand as the governor initially, then we changed it to something else. Now also
cur_policycontains a address and isn't zero.I just tested this case with this patch applied, and did not have any problems.
Quoted 10 lines
Try this:
- you need a system with multiple policy groups to test it
- Suppose we have two groups of CPUs: 0 and 1
- Set ondemand as governor for both
- change governor of group 1 to something else (we still have valid policy struct in Ondemand)
- offline all CPUs from group 1. this will free structcpufreq_policy
- Online these CPUs back, this will reallocate policy
- Now run this function, the earlier policy struct is already freed and you are accessing it here.
Ah, I understand now.
Quoted 22 lines
Quoted 11 lines
Quoted 10 lines
Quoted 7 lines
Quoted 5 lines
Review
Quoted 5 lines
cpumask_or(&done, &done, policy->cpus);(quoted diff) +3
-0+ + if (policy->governor != &cpufreq_gov_ondemand) + continue;This should catch that case no ?
Policy might be freed and reallocated by then. And so doing
policy->governoris dangerous.Quoted 7 lines
Are you worried that after we have passed the above if check, and before we access ->tuner governor change might occur?
Is there something synonymous to get/put_online_cpus() for cpufreq to prevent governor change while we update ->tuner values?
Otherwise, should just spinlock?
No, i wasn't worrying about this but a sequence of events that I told to you earlier.
Quoted 7 lines
Replying to your other mail:
Quoted 2 lines
Hm . any hints on how to check for if ondemand is running on this CPU or not ? I'm not sure what the best way to handle this is ..
Make
cur_policyzero incpufreq_governor_dbs()forCPUFREQ_GOV_STOPnotification. This will make sure we use correct policy pointer.
Thanks for the tip :-)
Here is V2:
---8<---
From d99ee318c0f9c415a60e6b0b79605232edbb749c Mon Sep 17 00:00:00 2001
From: Jacob Shin <[email protected]>
Date: Thu, 27 Jun 2013 09:39:48 -0500
Subject: [PATCH V2 1/1] cpufreq: fix NULL pointer deference at
od_set_powersave_bias()
When initializing the default powersave_bias value, we need to first make sure that this policy is running the ondemand governor.
--- drivers/cpufreq/cpufreq_governor.c | 1 + drivers/cpufreq/cpufreq_ondemand.c | 17 +++++++++++++---- 2 files changed, 14 insertions(+), 4 deletions(-)
drivers/cpufreq/cpufreq_governor.c +1 -0
@@ -403,6 +403,7 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy,gov_cancel_work (dbs_data, policy);mutex_lock (&dbs_data->mutex); + cpu_cdbs->cur_policy =NULL ;mutex_destroy (&cpu_cdbs->timer_mutex);mutex_unlock (&dbs_data->mutex);
drivers/cpufreq/cpufreq_ondemand.c +13 -4
@@ -47,6 +47,8 @@ static struct od_ops od_ops;static struct cpufreq_governor cpufreq_gov_ondemand;#endif +static unsigned int default_powersave_bias; +static void ondemand_powersave_bias_init_cpu (int cpu) {struct od_cpu_dbs_info_s *dbs_info = &per_cpu (od_cpu_dbs_info, cpu);
@@ -543,7 +545,7 @@ static int od_init(struct dbs_data *dbs_data) tuners->sampling_down_factor =DEF_SAMPLING_DOWN_FACTOR ; tuners->ignore_nice =0 ; - tuners->powersave_bias =0 ; + tuners->powersave_bias = default_powersave_bias; tuners->io_is_busy =should_io_be_busy (); dbs_data->tuners = tuners;
@@ -585,6 +587,7 @@ static void od_set_powersave_bias(unsigned int powersave_bias)unsigned int cpu;cpumask_t done; + default_powersave_bias = powersave_bias;cpumask_clear (&done);get_online_cpus ();
@@ -593,11 +596,17 @@ static void od_set_powersave_bias(unsigned int powersave_bias)continue ; policy =per_cpu (od_cpu_dbs_info, cpu).cdbs.cur_policy; - dbs_data = policy->governor_data; - od_tuners = dbs_data->tuners; - od_tuners->powersave_bias = powersave_bias; +if (!policy) +continue ;cpumask_or (&done, &done, policy->cpus); + +if (policy->governor != &cpufreq_gov_ondemand) +continue ; + + dbs_data = policy->governor_data; + od_tuners = dbs_data->tuners; + od_tuners->powersave_bias = default_powersave_bias; }put_online_cpus (); }
Signature · 1 line
1.7.10.4
Viresh Kumar
maintainerdrivers/cpufreq/cpufreq_ondemand.c static struct od_ops od_ops; · line 50
Quoted 9 lines · Jacob Shin
drivers/cpufreq/cpufreq_ondemand.c +1
-0@@ -47,6 +47,8 @@ static struct od_ops od_ops;static struct cpufreq_governor cpufreq_gov_ondemand;#endif +static unsigned int default_powersave_bias;
Because you haven't replied to my earlier comment on this, I thought you agreed. But it looks you haven't read my first reply well.
Viresh Kumar
maintainerQuoted 9 lines · Viresh Kumar
Quoted 8 lines · Jacob Shin
drivers/cpufreq/cpufreq_ondemand.c +0
-0@@ -47,6 +47,8 @@ static struct od_ops od_ops;static struct cpufreq_governor cpufreq_gov_ondemand;#endif
Quoted 5 lines
drivers/cpufreq/cpufreq_ondemand.c static struct od_ops od_ops; · line 50
Quoted 1 line
drivers/cpufreq/cpufreq_ondemand.c +1
-0+static unsigned int default_powersave_bias;Because you haven't replied to my earlier comment on this, I thought you agreed. But it looks you haven't read my first reply well.
BTW, your v1 is already applied and sent to Linus. So, you need to send only fixup now.
But, you still need to answer why you need default_powersave_bias? And if it is not a must then should be removed.
Quoted 2 lines · Viresh Kumar
BTW, your v1 is already applied and sent to Linus. So, you need to send only fixup now.
Here is the fixup delta patch, thanks! :
---8<---
From 133f670aa1dc450fd37ba39081d046bf238c507b Mon Sep 17 00:00:00 2001
From: Jacob Shin <[email protected]>
Date: Thu, 27 Jun 2013 10:44:42 -0500
Subject: [PATCH 1/1] cpufreq: don't leave stale policy pointer in
cdbs->cur_policy
Set ->cur_policy to NULL when stopping a governor. Otherwise, the ->cur_policy pointer may be stale on systems that have_governor_per_policy when a new policy is allocated due to CPU hotplug offline/online.
--- drivers/cpufreq/cpufreq_governor.c | 1 + 1 file changed, 1 insertion(+)
drivers/cpufreq/cpufreq_governor.c +1 -0
@@ -404,6 +404,7 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy,mutex_lock (&dbs_data->mutex);mutex_destroy (&cpu_cdbs->timer_mutex); + cpu_cdbs->cur_policy =NULL ;mutex_unlock (&dbs_data->mutex);
Signature · 1 line
1.7.10.4
Quoted 11 lines · Jacob Shin
From
133f670aa1dc450fd37ba39081d046bf238c507bMon Sep 17 00:00:00 2001
From: Jacob Shin <[email protected]>
Date: Thu, 27 Jun 2013 10:44:42 -0500
Subject: [PATCH 1/1] cpufreq: don't leave stale policy pointer in
cdbs->cur_policySet ->cur_policy to NULL when stopping a governor. Otherwise, the ->cur_policy pointer may be stale on systems that
have_governor_per_policywhen a new policy is allocated due to CPU hotplug offline/online.
Quoted 5 lines
Suggested-by Viresh Kumar <[email protected]>Signed-off-by Jacob Shin <[email protected]>--- drivers/cpufreq/cpufreq_governor.c | 1 + 1 file changed, 1 insertion(+)
Quoted 9 lines · Viresh Kumar
Quoted 8 lines · Jacob Shin
drivers/cpufreq/cpufreq_ondemand.c +0
-0@@ -47,6 +47,8 @@ static struct od_ops od_ops;static struct cpufreq_governor cpufreq_gov_ondemand;#endif
Quoted 8 lines
drivers/cpufreq/cpufreq_ondemand.c static struct od_ops od_ops; · line 50
Quoted 1 line
drivers/cpufreq/cpufreq_ondemand.c +1
-0+static unsigned int default_powersave_bias;Why are the above three changes required? And in case they are, then they must have been commited separately.
Because you haven't replied to my earlier comment on this, I thought you agreed. But it looks you haven't read my first reply well.
Sorry I totally missed it,
I was trying to account for the case when od_set_powersave_bias() is called while ondemand is not the current governor. And then later becomes the current governor. So when od_init() is called it will take the expected default, rather than 0.
Viresh Kumar
maintainerQuoted 6 lines · Jacob Shin
Sorry I totally missed it,
I was trying to account for the case when
od_set_powersave_bias()is called while ondemand is not the current governor. And then later becomes the current governor. So whenod_init()is called it will take the expected default, rather than 0.
Ok. leave it as is.