Skip to contentSkip to conversation

memmap exclude boot command: how to check if it was indeed applied

DISCUSSION Eric Valette 1 participant 2 messages Jul 1, 2013 – Jul 2, 2013

lore
Share & tools
lore
#0 lore raw

Hi,

After hunting an unreproducible bug, I decided to run memtest86+ and found that only 8 byte of memory refuse to write the last two digit on the last 4GB memory stick.

Memory is at 0x31db357558

So I decided to add a memmap=4K@0x000000031db35000 boot options in GRUB_CMDLINE_LINUX. But checking dmesg, I see no mention of this page being reserved.

PS: CC me I'm not subscribed.

-- eric

#1 lore raw
Quoted 6 lines · Eric Valette

Hi,

After hunting an unreproducible bug, I decided to run memtest86+ and found that only 8 byte of memory refuse to write the last two digit on the last 4GB memory stick.

Quoted 7 lines

Memory is at 0x31db357558

So I decided to add a memmap=4K@0x000000031db35000 boot options in GRUB_CMDLINE_LINUX. But checking dmesg, I see no mention of this page being reserved.

PS: CC me I'm not subscribed.

Analysing /sys/firmware/memmap files, I see no trace of buggy address exclusion. Any help?

--eric