mm/slab: Fix drain freelist excessively
Subsystems (2)
PATCH v3 1/5 mm/slab: Fix drain freelist excessively
Changelog:
v1 -> v2:
* Fix the callers that pass # of objects. Make sure they pass # of slabs.
v2 -> v3:
* introduce helper function slabs_tofree
The drain_freelist is called to drain slabs_free lists for cache reap, cache shrink, memory hotplug callback etc. The tofree parameter should be the number of slab to free instead of the number of slab objects to free.
This patch fix the callers that pass # of objects. Make sure they pass # of slabs.
--- mm/slab.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
mm/slab.c +9 -3
@@ -1180,6 +1180,12 @@ static int init_cache_node_node(int node)return 0 ; } +static inline int slabs_tofree (struct kmem_cache *cachep, +struct kmem_cache_node *n) +{ +return (n->free_objects + cachep->num -1 ) / cachep->num; +} +static void cpuup_canceled (long cpu) {struct kmem_cache *cachep;
@@ -1241,7 +1247,7 @@ free_array_cache: n = cachep->node[node];if (!n)continue ; -drain_freelist (cachep, n, n->free_objects); +drain_freelist (cachep, n,slabs_tofree (cachep, n)); } }
@@ -1408,7 +1414,7 @@ static int __meminit drain_cache_node_node(int node)if (!n)continue ; -drain_freelist (cachep, n, n->free_objects); +drain_freelist (cachep, n,slabs_tofree (cachep, n));if (!list_empty (&n->slabs_full) || !list_empty (&n->slabs_partial)) {
@@ -2532,7 +2538,7 @@ static int __cache_shrink(struct kmem_cache *cachep)if (!n)continue ; -drain_freelist (cachep, n, n->free_objects); +drain_freelist (cachep, n,slabs_tofree (cachep, n)); ret += !list_empty (&n->slabs_full) || !list_empty (&n->slabs_partial);
Signature · 1 line
1.8.1.2
PATCH v3 2/5 mm/slab: Sharing s_next and s_stop between slab and slub
This patch shares s_next and s_stop between slab and slub.
--- mm/slab.c | 10 ---------- mm/slab.h | 3 +++ mm/slab_common.c | 4 ++-- 3 files changed, 5 insertions(+), 12 deletions(-)
mm/slab.c +0 -10
@@ -4436,16 +4436,6 @@ static int leaks_show(struct seq_file *m, void *p)return 0 ; } -static void *s_next (struct seq_file *m,void *p,loff_t *pos) -{ -return seq_list_next (p, &slab_caches, pos); -} - -static void s_stop (struct seq_file *m,void *p) -{ -mutex_unlock (&slab_mutex); -} -static const struct seq_operations slabstats_op = { .start = leaks_start, .next = s_next,
mm/slab.h +3 -0
@@ -271,3 +271,6 @@ struct kmem_cache_node {#endif }; + +void *s_next (struct seq_file *m,void *p,loff_t *pos); +void s_stop (struct seq_file *m,void *p);
mm/slab_common.c +2 -2
@@ -531,12 +531,12 @@ static void *s_start(struct seq_file *m, loff_t *pos)return seq_list_start (&slab_caches, *pos); } -static void *s_next (struct seq_file *m,void *p,loff_t *pos) +void *s_next (struct seq_file *m,void *p,loff_t *pos) {return seq_list_next (p, &slab_caches, pos); } -static void s_stop (struct seq_file *m,void *p) +void s_stop (struct seq_file *m,void *p) {mutex_unlock (&slab_mutex); }
Signature · 7 lines
1.8.1.2 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
PATCH v3 3/5 mm/slab: Fix /proc/slabinfo unwriteable for slab
In reply to Wanpeng LiSlab have some tunables like limit, batchcount, and sharedfactor can be tuned through function slabinfo_write. Commit (b7454ad3: mm/sl[au]b: Move slabinfo processing to slab_common.c) uncorrectly change /proc/slabinfo unwriteable for slab, this patch fix it by revert to original mode.
--- mm/slab_common.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
mm/slab_common.c +9 -1
@@ -497,6 +497,13 @@ void __init create_kmalloc_caches(unsigned long flags)#ifdef CONFIG_SLABINFO + +#ifdef CONFIG_SLAB +#define SLABINFO_RIGHTS (S_IWUSR | S_IRUSR) +#else +#define SLABINFO_RIGHTS S_IRUSR +#endif +void print_slabinfo_header (struct seq_file *m) {/*
@@ -633,7 +640,8 @@ static const struct file_operations proc_slabinfo_operations = {static int __init slab_proc_init (void ) { -proc_create ("slabinfo" ,S_IRUSR ,NULL , &proc_slabinfo_operations); +proc_create ("slabinfo" ,SLABINFO_RIGHTS ,NULL , + &proc_slabinfo_operations);return 0 ; }module_init (slab_proc_init);
Signature · 7 lines
1.8.1.2 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
PATCH v3 4/5 mm/slub: Drop unnecessary nr_partials
In reply to Wanpeng LiThis patch remove unused nr_partials variable.
--- mm/slub.c | 2 -- 1 file changed, 2 deletions(-)
mm/slub.c +0 -2
@@ -5269,7 +5269,6 @@ __initcall(slab_sysfs_init);#ifdef CONFIG_SLABINFO void get_slabinfo (struct kmem_cache *s,struct slabinfo *sinfo) { -unsigned long nr_partials =0 ;unsigned long nr_slabs =0 ;unsigned long nr_objs =0 ;unsigned long nr_free =0 ;
@@ -5281,7 +5280,6 @@ void get_slabinfo(struct kmem_cache *s, struct slabinfo *sinfo)if (!n)continue ; - nr_partials += n->nr_partial; nr_slabs +=atomic_long_read (&n->nr_slabs); nr_objs +=atomic_long_read (&n->total_objects); nr_free +=count_partial (n, count_free);
Signature · 7 lines
1.8.1.2 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
PATCH v3 5/5 mm/slub: Use node_nr_slabs and node_nr_objs in get_slabinfo
In reply to Wanpeng LiUse existing interface node_nr_slabs and node_nr_objs to get nr_slabs and nr_objs.
--- mm/slub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
mm/slub.c +2 -2
@@ -5280,8 +5280,8 @@ void get_slabinfo(struct kmem_cache *s, struct slabinfo *sinfo)if (!n)continue ; - nr_slabs +=atomic_long_read (&n->nr_slabs); - nr_objs +=atomic_long_read (&n->total_objects); + nr_slabs +=node_nr_slabs (n); + nr_objs +=node_nr_objs (n); nr_free +=count_partial (n, count_free); }
Signature · 7 lines
1.8.1.2 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 2 lines · Wanpeng Li
This patch fix the callers that pass # of objects. Make sure they pass # of slabs.
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 6 lines · Christoph Lameter
Quoted 2 lines · Wanpeng Li
This patch fix the callers that pass # of objects. Make sure they pass # of slabs.
Hi Pekka,
Is it ok for you to pick this patchset? ;-)
Regards,
Wanpeng Li
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Pekka Enberg
AppliedQuoted 11 lines · Wanpeng Li
Quoted 6 lines · Christoph Lameter
Quoted 2 lines · Wanpeng Li
This patch fix the callers that pass # of objects. Make sure they pass # of slabs.
Hi Pekka,
Is it ok for you to pick this patchset? ;-)
Applied, thanks a lot!
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>
Quoted 6 lines · Christoph Lameter
Quoted 2 lines · Wanpeng Li
This patch fix the callers that pass # of objects. Make sure they pass # of slabs.
Hi Pekka,
Is it ok for you to pick this patchset? ;-)
Regards,
Wanpeng Li
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to [email protected]. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"[email protected]"> [email protected] </a>