Skip to contentSkip to conversation

MPC8272ADS and uboot program check

U-Boot-Users Bastos Fernandez Alexandre 1 participant 1 message Sep 16, 2004

lore
Share & tools
lore
#0 lore raw

Wolfgang,

Quoted 2 lines
Quoted 2 lines
Quoted 2 lines

First of all, I would acknowleging that Wolfgang is probably right and

you

Quoted 7 lines
Quoted 1 line

probably have a hardware problem.

Please configure your mailer to quote correctly.

BOTH lines above are quotes, but only the first line is marked as such. This essentially makes your messages unreadable. please fix this!

Sorry about that. For me all this was the same line. I haven't arrived to configure my mailer to quote this way at all (so I have to do it by hand) :-(
Sometimes, I have some problems to send plain-text only, but this is another discussion.

Quoted 1 line
Quoted 1 line

It could be. I had some problem with the Flash in the past, but there,

the

Quoted 6 lines
Quoted 2 lines

board didn't start at all and kept rebooting in a few miliseconds with a HRESET.

I think all additional discussion is in vain. You have known hardware problems, so it makes no sense to continue.

Quoted 7 lines

Don't try to understand why the failure mode is a reset in one case or a spectacular crash in another one - when yoiur flash is failing you must assume that the CPU is executing random data. This can be anything, and fail at any time andin any way you can or cannot imagine.

Stop here, and fix or replace the hardware.

OK. I will.

Thank for all.

Alex