FCC2 issue on PQ2FADS
Kumar,
Which MAC address is being sent as source by ping echo request? Some time ago I found out some problem sending packets from one interface with the MAC address from the other interface, which resulted in the PHY doesn't capturing the reply packet
Best regards,
Alex
Quoted 34 lines
-----Original Message-----
Cc: "u-boot-users list" <[email protected]>
From: Kumar Gala <[email protected]>
Subject: Re: [U-Boot-Users] FCC2 issue on PQ2FADS
Date: Fri, 7 Jan 2005 17:28:27 -0600
To: "Yuli Barcohen" <[email protected]>Quoted 3 lines · Yuli Barcohen
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Kumar Gala writes:
=A0=A0=A0 Kumar> I've got a new PQ2FADS board and am having issues =
with FCC2.
Quoted 1 line
=A0=A0=A0 Kumar> I'm using the 1.1.2 release, we seem to be able to =
transmit
Quoted 6 lines
=A0=A0=A0 Kumar> but not receive packets.
=A0=A0=A0 Kumar> Any ideas?
Is the board connected to the LAN using hub? If yes, try switch. There
can be problems with half-duplex link.I've tried both a hub & switch. One odd thing was that the hub was=20 reporting half duplex, but the board was report full. I tried=20 modifying the
fcc_psmrto match, but that only made things worse.I need to try using the other ethernet port and see what happens.
- kumar