PCIE resetting graphic card
Hi, Takao
I know you are working on the PCIE resetting patches for the iommu kdump issue.
You explicitly excluded the graphic card in your patch. I have some questions about this. Why can't we reset the graphic card like other pcie devices?
We have problems, if 1st kernel is in kms mode kdump kernel will have no chance to switch back to VGA console. There's no serial port on most of recent laptops thus it's difficult to debug kdump issue.
So if we can reset graphic card as well, and if it works I wonder if the 2nd kdump kernel can use vga console with nomodeset?
Signature · 2 lines
Thanks Dave
Hi Dave,
Quoted 8 lines · Dave Young
Hi, Takao
I know you are working on the PCIE resetting patches for the iommu kdump issue.
You explicitly excluded the graphic card in your patch. I have some questions about this. Why can't we reset the graphic card like other pcie devices?
As far as I tested, the monitor blacks out after video controller is reset, and we cannot know what's going on. So, for now display device is not reset in my patch.
I'm not sure what we need to do to recover graphic card after its reset, but my colleague said that we need to run BIOS code to get back legacy VGA mode after reset. It seems not to be easy:-(
Maybe this document is helpful to do this.
http://www.coreboot.org/images/2/2b/Vgabios.pdf
Thanks,
Takao Indoh
Quoted 7 lines
We have problems, if 1st kernel is in kms mode kdump kernel will have no chance to switch back to VGA console. There's no serial port on most of recent laptops thus it's difficult to debug kdump issue.
So if we can reset graphic card as well, and if it works I wonder if the 2nd kdump kernel can use vga console with nomodeset?
Hi, Takao
Quoted 16 lines · Takao Indoh
Hi Dave,
Quoted 8 lines · Dave Young
Hi, Takao
I know you are working on the PCIE resetting patches for the iommu kdump issue.
You explicitly excluded the graphic card in your patch. I have some questions about this. Why can't we reset the graphic card like other pcie devices?
As far as I tested, the monitor blacks out after video controller is reset, and we cannot know what's going on. So, for now display device is not reset in my patch.
Quoted 6 lines
I'm not sure what we need to do to recover graphic card after its reset, but my colleague said that we need to run BIOS code to get back legacy VGA mode after reset. It seems not to be easy:-(
Maybe this document is helpful to do this.
http://www.coreboot.org/images/2/2b/Vgabios.pdf
Thanks for quick response and the info about vgabios. It's awkward that we can not switch back to VGA mode.
Signature · 2 lines
Thanks Dave