ARM: tegra: remove tegra114-pluto.dts
Subsystems (3)
PATCH 1/1 ARM: tegra: remove tegra114-pluto.dts
From: Stephen Warren <[email protected]>
Early upstream work on Tegra114 was performed on the Pluto board. However, it's not used any more, and the DT doesn't contain anything beyond a serial port, so the file isn't useful either. Remove it.
Signed-off-by Stephen Warren <[email protected]>
--- arch/arm/boot/dts/Makefile | 3 +-- arch/arm/boot/dts/tegra114-pluto.dts | 33 --------------------------------- 2 files changed, 1 insertion(+), 35 deletions(-) delete mode 100644 arch/arm/boot/dts/tegra114-pluto.dts
arch/arm/boot/dts/Makefile +1 -2
@@ -228,8 +228,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ - tegra114-dalmore.dtb \ - tegra114-pluto.dtb + tegra114-dalmore.dtb dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ versatile-pb.dtb dtb-$(CONFIG_ARCH_U300) += ste-u300.dtb
arch/arm/boot/dts/tegra114-pluto.dts deleted +0 -33
@@ -1,33 +0,0 @@ -/dts-v1/; - -#include "tegra114.dtsi" - -/ { - model = "NVIDIA Tegra114 Pluto evaluation board"; - compatible = "nvidia,pluto", "nvidia,tegra114"; - - memory { - reg = <0x80000000 0x40000000>; - }; - - serial at 70006300 { - status = "okay"; - }; - - pmc { - nvidia,invert-interrupt; - }; - - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - clk32k_in: clock { - compatible = "fixed-clock"; - reg=<0>; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - }; -};
Signature · 1 line
1.8.1.5
Stephen Warren
AppliedPATCH 1/1 ARM: tegra: remove tegra114-pluto.dts
Quoted 3 lines · Stephen Warren
Early upstream work on Tegra114 was performed on the Pluto board. However, it's not used any more, and the DT doesn't contain anything beyond a serial port, so the file isn't useful either. Remove it.
Applied to Tegra's for-3.12/dt branch.