ocfs2: lighten up allocate transaction
PATCH v2 1/1 ocfs2: lighten up allocate transaction
The issue scenario is as following:
When fallocating a very large disk space for a small file, __ocfs2_extend_allocation attempts to get a very large transaction. For some journal sizes, there may be not enough room for this transaction, and the fallocate will fail.
The patch below extents & restarts the transaction as necessary while allocating space, and should work with even the smallest journal. This patch refers ext4 resize.
Test:
# mkfs.ocfs2 -b 4K -C 32K -T datafiles /dev/sdc ...(jounral size is 32M) # mount.ocfs2 /dev/sdc /mnt/ocfs2/ # touch /mnt/ocfs2/1.log # fallocate -o 0 -l 400G /mnt/ocfs2/1.log fallocate: /mnt/ocfs2/1.log: fallocate failed: Cannot allocate memory # tail -f /var/log/messages [ 7372.278591] JBD: fallocate wants too many credits (2051 > 2048) [ 7372.278597] (fallocate,6438,0):__ocfs2_extend_allocation:709 ERROR: status = -12 [ 7372.278603] (fallocate,6438,0):ocfs2_allocate_unwritten_extents:1504 ERROR: status = -12 [ 7372.278607] (fallocate,6438,0):__ocfs2_change_file_space:1955 ERROR: status = -12 ^C
With this patch, the test works well.
--- fs/ocfs2/file.c | 6 +----- fs/ocfs2/journal.c | 34 ++++++++++++++++++++++++++++++++++ fs/ocfs2/journal.h | 11 +++++++++++ fs/ocfs2/ocfs2_trace.h | 2 ++ 4 files changed, 48 insertions(+), 5 deletions(-)
fs/ocfs2/file.c +0 -0
@@ -666,11 +666,7 @@ restarted_transaction:
} else {
BUG_ON(why != RESTART_TRANS);- /* TODO: This can be more intelligent. */
- credits = ocfs2_calc_extend_credits(osb->sb,
- &fe->id2.i_list,
- clusters_to_add);
- status = ocfs2_extend_trans(handle, credits);
+ status = ocfs2_allocate_extend_trans(handle, 1);
if (status < 0) {
/* handle still has to be committed at
* this point. */fs/ocfs2/journal.c +0 -0
@@ -455,6 +455,40 @@ bail:
return status;
}
+/*
+ * If we have fewer than thresh credits, extend by OCFS2_MAX_TRANS_DATA.
+ * If that fails, restart the transaction & regain write access for the
+ * buffer head which is used for metadata modifications.
+ * Taken from Ext4: extend_or_restart_transaction()
+ */
+int ocfs2_allocate_extend_trans(handle_t *handle, int thresh) +{
+ int status, old_nblks;
+
+ BUG_ON(!handle);
+
+ old_nblks = handle->h_buffer_credits;
+ trace_ocfs2_allocate_extend_trans(old_nblks, thresh);
+
+ if (old_nblks < thresh)
+ return 0;
+
+ status = jbd2_journal_extend(handle, OCFS2_MAX_TRANS_DATA);
+ if (status < 0) {
+ mlog_errno(status);
+ goto bail;
+ }
+
+ if (status > 0) {
+ status = jbd2_journal_restart(handle, OCFS2_MAX_TRANS_DATA);
+ if (status < 0)
+ mlog_errno(status);
+ }
+
+bail:
+ return status;
+}
+
struct ocfs2_triggers {
struct jbd2_buffer_trigger_type ot_triggers;
int ot_offset;fs/ocfs2/journal.h +0 -0
@@ -259,6 +259,17 @@ handle_t *ocfs2_start_trans(struct ocfs2_super *osb, int ocfs2_commit_trans(struct ocfs2_super *osb,
handle_t *handle);
int ocfs2_extend_trans(handle_t *handle, int nblocks);
+int ocfs2_allocate_extend_trans(handle_t *handle,
+ int thresh);
+
+/*
+ * Define an arbitrary limit for the amount of data we will anticipate
+ * writing to any given transaction. For unbounded transactions such as
+ * fallocate(2) we can write more than this, but we always
+ * start off@the maximum transaction size and grow the transaction
+ * optimistically as we go.
+ */
+#define OCFS2_MAX_TRANS_DATA 64U
/*
* Create access is for when we get a newly created buffer and we're
fs/ocfs2/ocfs2_trace.h +2 -0
@@ -2579,6 +2579,8 @@ DEFINE_OCFS2_INT_INT_EVENT(ocfs2_extend_trans);DEFINE_OCFS2_INT_EVENT (ocfs2_extend_trans_restart); +DEFINE_OCFS2_INT_INT_EVENT (ocfs2_allocate_extend_trans); +DEFINE_OCFS2_ULL_ULL_UINT_UINT_EVENT (ocfs2_journal_access);DEFINE_OCFS2_ULL_EVENT (ocfs2_journal_dirty);
--
1.7.9.7
PATCH v2 1/1 ocfs2: lighten up allocate transaction
I failed in applying this patch as: fatal: corrupt patch at line 41
Thanks,
-Jeff
Quoted 135 lines · Younger Liu
The issue scenario is as following:
When fallocating a very large disk space for a small file,__ocfs2_extend_allocationattempts to get a very large transaction. For some journal sizes, there may be not enough room for this transaction, and the fallocate will fail.The patch below extents & restarts the transaction as necessary while allocating space, and should work with even the smallest journal. This patch refers ext4 resize.
Test:
# mkfs.ocfs2 -b 4K -C 32K -T datafiles /dev/sdc ...(jounral size is 32M) # mount.ocfs2 /dev/sdc /mnt/ocfs2/ # touch /mnt/ocfs2/1.log # fallocate -o 0 -l 400G /mnt/ocfs2/1.log fallocate: /mnt/ocfs2/1.log: fallocate failed: Cannot allocate memory # tail -f /var/log/messages [ 7372.278591] JBD: fallocate wants too many credits (2051 > 2048) [ 7372.278597] (fallocate,6438,0):__ocfs2_extend_allocation:709 ERROR: status = -12 [ 7372.278603] (fallocate,6438,0):ocfs2_allocate_unwritten_extents:1504 ERROR: status = -12 [ 7372.278607] (fallocate,6438,0):__ocfs2_change_file_space:1955 ERROR: status = -12 ^CWith this patch, the test works well.
Signed-off-by Younger Liu <[email protected]>Tested-by Jie Liu <[email protected]>--- fs/ocfs2/file.c | 6 +----- fs/ocfs2/journal.c | 34 ++++++++++++++++++++++++++++++++++ fs/ocfs2/journal.h | 11 +++++++++++ fs/ocfs2/ocfs2_trace.h | 2 ++ 4 files changed, 48 insertions(+), 5 deletions(-)fs/ocfs2/file.c +1
-5@@ -666,11 +666,7 @@ restarted_transaction: }else {BUG_ON (why !=RESTART_TRANS ); -/* TODO: This can be more intelligent. */ - credits =ocfs2_calc_extend_credits (osb->sb, - &fe->id2.i_list, - clusters_to_add); - status =ocfs2_extend_trans (handle, credits); + status =ocfs2_allocate_extend_trans (handle,1 );if (status <0 ) {/* handle still has to be committed at * this point. */ fs/ocfs2/journal.c +34
-0@@ -455,6 +455,40 @@ bail:return status; } +/* +* If we have fewer than thresh credits, extend by OCFS2_MAX_TRANS_DATA. +* If that fails, restart the transaction & regain write access for the +* buffer head which is used for metadata modifications. +* Taken from Ext4: extend_or_restart_transaction() +*/ +int ocfs2_allocate_extend_trans (handle_t *handle,int thresh) +{ +int status, old_nblks; + +BUG_ON (!handle); + + old_nblks = handle->h_buffer_credits; +trace_ocfs2_allocate_extend_trans (old_nblks, thresh); + +if (old_nblks < thresh) +return 0 ; + + status =jbd2_journal_extend (handle,OCFS2_MAX_TRANS_DATA ); +if (status <0 ) { +mlog_errno (status); + goto bail; + } + +if (status >0 ) { + status =jbd2_journal_restart (handle,OCFS2_MAX_TRANS_DATA ); +if (status <0 ) +mlog_errno (status); + } + +bail: +return status; +} +struct ocfs2_triggers {struct jbd2_buffer_trigger_type ot_triggers;int ot_offset;fs/ocfs2/journal.h +11
-0@@ -259,6 +259,17 @@ handle_t *ocfs2_start_trans(struct ocfs2_super *osb,int ocfs2_commit_trans (struct ocfs2_super *osb,handle_t *handle);int ocfs2_extend_trans (handle_t *handle,int nblocks); +int ocfs2_allocate_extend_trans (handle_t *handle, +int thresh); + +/* +* Define an arbitrary limit for the amount of data we will anticipate +* writing to any given transaction. For unbounded transactions such as +* fallocate(2) we can write more than this, but we always +* start off at the maximum transaction size and grow the transaction +* optimistically as we go. +*/ +#define OCFS2_MAX_TRANS_DATA 64U/* * Create access is for when we get a newly created buffer and we're fs/ocfs2/ocfs2_trace.h +2
-1@@ -2579,6 +2579,8 @@ DEFINE_OCFS2_INT_INT_EVENT(ocfs2_extend_trans);DEFINE_OCFS2_INT_EVENT (ocfs2_extend_trans_restart); +DEFINE_OCFS2_INT_INT_EVENT (ocfs2_allocate_extend_trans); +DEFINE_OCFS2_ULL_ULL_UINT_UINT_EVENT (ocfs2_journal_access);DEFINE_OCFS2_ULL_EVENT (ocfs2_journal_dirty); --1.7.9.7
PATCH v2 1/1 ocfs2: lighten up allocate transaction
Quoted 4 lines · Jeff Liu
I failed in applying this patch as: fatal: corrupt patch at line 41
Thanks,
-Jeff
Hi Jeff
I will resent the patch, thanks.
Quoted 142 lines · Younger Liu
Quoted 134 lines
The issue scenario is as following:
When fallocating a very large disk space for a small file,__ocfs2_extend_allocationattempts to get a very large transaction. For some journal sizes, there may be not enough room for this transaction, and the fallocate will fail.The patch below extents & restarts the transaction as necessary while allocating space, and should work with even the smallest journal. This patch refers ext4 resize.
Test:
# mkfs.ocfs2 -b 4K -C 32K -T datafiles /dev/sdc ...(jounral size is 32M) # mount.ocfs2 /dev/sdc /mnt/ocfs2/ # touch /mnt/ocfs2/1.log # fallocate -o 0 -l 400G /mnt/ocfs2/1.log fallocate: /mnt/ocfs2/1.log: fallocate failed: Cannot allocate memory # tail -f /var/log/messages [ 7372.278591] JBD: fallocate wants too many credits (2051 > 2048) [ 7372.278597] (fallocate,6438,0):__ocfs2_extend_allocation:709 ERROR: status = -12 [ 7372.278603] (fallocate,6438,0):ocfs2_allocate_unwritten_extents:1504 ERROR: status = -12 [ 7372.278607] (fallocate,6438,0):__ocfs2_change_file_space:1955 ERROR: status = -12 ^CWith this patch, the test works well.
Signed-off-by Younger Liu <[email protected]>Tested-by Jie Liu <[email protected]>--- fs/ocfs2/file.c | 6 +----- fs/ocfs2/journal.c | 34 ++++++++++++++++++++++++++++++++++ fs/ocfs2/journal.h | 11 +++++++++++ fs/ocfs2/ocfs2_trace.h | 2 ++ 4 files changed, 48 insertions(+), 5 deletions(-)fs/ocfs2/file.c +1
-5@@ -666,11 +666,7 @@ restarted_transaction: }else {BUG_ON (why !=RESTART_TRANS ); -/* TODO: This can be more intelligent. */ - credits =ocfs2_calc_extend_credits (osb->sb, - &fe->id2.i_list, - clusters_to_add); - status =ocfs2_extend_trans (handle, credits); + status =ocfs2_allocate_extend_trans (handle,1 );if (status <0 ) {/* handle still has to be committed at * this point. */ fs/ocfs2/journal.c +34
-0@@ -455,6 +455,40 @@ bail:return status; } +/* +* If we have fewer than thresh credits, extend by OCFS2_MAX_TRANS_DATA. +* If that fails, restart the transaction & regain write access for the +* buffer head which is used for metadata modifications. +* Taken from Ext4: extend_or_restart_transaction() +*/ +int ocfs2_allocate_extend_trans (handle_t *handle,int thresh) +{ +int status, old_nblks; + +BUG_ON (!handle); + + old_nblks = handle->h_buffer_credits; +trace_ocfs2_allocate_extend_trans (old_nblks, thresh); + +if (old_nblks < thresh) +return 0 ; + + status =jbd2_journal_extend (handle,OCFS2_MAX_TRANS_DATA ); +if (status <0 ) { +mlog_errno (status); + goto bail; + } + +if (status >0 ) { + status =jbd2_journal_restart (handle,OCFS2_MAX_TRANS_DATA ); +if (status <0 ) +mlog_errno (status); + } + +bail: +return status; +} +struct ocfs2_triggers {struct jbd2_buffer_trigger_type ot_triggers;int ot_offset;fs/ocfs2/journal.h +11
-0@@ -259,6 +259,17 @@ handle_t *ocfs2_start_trans(struct ocfs2_super *osb,int ocfs2_commit_trans (struct ocfs2_super *osb,handle_t *handle);int ocfs2_extend_trans (handle_t *handle,int nblocks); +int ocfs2_allocate_extend_trans (handle_t *handle, +int thresh); + +/* +* Define an arbitrary limit for the amount of data we will anticipate +* writing to any given transaction. For unbounded transactions such as +* fallocate(2) we can write more than this, but we always +* start off at the maximum transaction size and grow the transaction +* optimistically as we go. +*/ +#define OCFS2_MAX_TRANS_DATA 64U/* * Create access is for when we get a newly created buffer and we're fs/ocfs2/ocfs2_trace.h +2
-1@@ -2579,6 +2579,8 @@ DEFINE_OCFS2_INT_INT_EVENT(ocfs2_extend_trans);DEFINE_OCFS2_INT_EVENT (ocfs2_extend_trans_restart); +DEFINE_OCFS2_INT_INT_EVENT (ocfs2_allocate_extend_trans); +DEFINE_OCFS2_ULL_ULL_UINT_UINT_EVENT (ocfs2_journal_access);DEFINE_OCFS2_ULL_EVENT (ocfs2_journal_dirty); --Quoted 2 lines
1.7.9.7
.