057c:3800 BlueFRITZ! Bluetooth Stick broken since 2.6.something

DISCUSSION Jörg Esser 4 participants 12 messages Jul 18, 2013 – Jul 25, 2013

Subsystems (2)

Bluetooth drivers Bluetooth

lore

Share & tools

lore

Jörg Esser

author

2013-07-18 13:26 UTC #0 lore raw

Hi list,

don´t know if it is wrong to post under the same topic which is more than one year old. Ref to it is here.
http://www.spinics.net/lists/linux-bluetooth/msg18763.html
There was never an answer to the latest question from Michael if there will be a solution.

I also tried to get this to run with my latest kernel 3.10 under debian 7 without success. Will there be a solution or should I open my real trashbin?(other sticks are working so far for me) :)

Let me know if you need more info´s on that.

Thx,
Joerg

My syslog says:

Jul 18 15:11:10 debian-capi kernel: [ 64.808373] usb 1-3: new full-speed USB device number 5 using ohci_hcd
Jul 18 15:11:10 debian-capi kernel: [ 65.277828] usb 1-3: New USB device found, idVendor=057c, idProduct=3800
Jul 18 15:11:10 debian-capi kernel: [ 65.277834] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul 18 15:11:10 debian-capi kernel: [ 65.277838] usb 1-3: Product: Bluetooth Device
Jul 18 15:11:10 debian-capi kernel: [ 65.277841] usb 1-3: Manufacturer: Bluetooth Device
Jul 18 15:11:10 debian-capi kernel: [ 65.277844] usb 1-3: SerialNumber: CC1C8D0E0400
Jul 18 15:11:10 debian-capi bluetoothd[2199]: HCI dev 0 registered
Jul 18 15:11:10 debian-capi bluetoothd[2199]: Listening for HCI events on hci0
Jul 18 15:11:11 debian-capi bluetoothd[2894]: Can't init device hci0: Invalid request code (56)

debian-capi:~# lsusb -v -d 057c:3800

Bus 001 Device 005: ID 057c:3800 AVM GmbH BlueFRITZ! Bluetooth Stick Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass bDeviceProtocol 255 Vendor Specific Protocol bMaxPacketSize0 64
idVendor 0x057c AVM GmbH
idProduct 0x3800 BlueFRITZ! Bluetooth Stick
bcdDevice 15.00
iManufacturer 1 Bluetooth Device
iProduct 2 Bluetooth Device
iSerial 3 CC1C8D0E0400
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 177
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)
debian-capi:~#

Marcel Holtmann

maintainer

2013-07-18 14:13 UTC #1 lore raw

Hi Joerg,

Quoted 14 lines

don´t know if it is wrong to post under the same topic which is more than one year old. Ref to it is here.
http://www.spinics.net/lists/linux-bluetooth/msg18763.html
There was never an answer to the latest question from Michael if there will be a solution.
I also tried to get this to run with my latest kernel 3.10 under debian 7 without success. Will there be a solution or should I open my real trashbin?(other sticks are working so far for me) :)
Let me know if you need more info´s on that.
Thx,
Joerg
My syslog says:

Quoted 9 lines

Jul 18 15:11:10 debian-capi kernel: [ 64.808373] usb 1-3: new full-speed USB device number 5 using ohci_hcd
Jul 18 15:11:10 debian-capi kernel: [ 65.277828] usb 1-3: New USB device found, idVendor=057c, idProduct=3800
Jul 18 15:11:10 debian-capi kernel: [ 65.277834] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul 18 15:11:10 debian-capi kernel: [ 65.277838] usb 1-3: Product: Bluetooth Device
Jul 18 15:11:10 debian-capi kernel: [ 65.277841] usb 1-3: Manufacturer: Bluetooth Device
Jul 18 15:11:10 debian-capi kernel: [ 65.277844] usb 1-3: SerialNumber: CC1C8D0E0400
Jul 18 15:11:10 debian-capi bluetoothd[2199]: HCI dev 0 registered
Jul 18 15:11:10 debian-capi bluetoothd[2199]: Listening for HCI events on hci0
Jul 18 15:11:11 debian-capi bluetoothd[2894]: Can't init device hci0: Invalid request code (56)

any chance you can run btmon and see if we have failing HCI commands during the setup phase.

Quoted 1 line

debian-capi:~# lsusb -v -d 057c:3800

Can you include /sys/kernel/debug/usb/devices from this device.

Regards

Marcel

Jörg Esser

author

2013-07-19 06:26 UTC #2 lore raw

Quoted 25 lines · Marcel Holtmann

Hi Joerg,
Quoted 14 lines
don´t know if it is wrong to post under the same topic which is more than one year old. Ref to it is here.
http://www.spinics.net/lists/linux-bluetooth/msg18763.html
There was never an answer to the latest question from Michael if there will be a solution.
I also tried to get this to run with my latest kernel 3.10 under debian 7 without success. Will there be a solution or should I open my real trashbin?(other sticks are working so far for me) :)
Let me know if you need more info´s on that.
Thx,
Joerg
My syslog says:
Quoted 9 lines
Jul 18 15:11:10 debian-capi kernel: [ 64.808373] usb 1-3: new full-speed USB device number 5 using ohci_hcd
Jul 18 15:11:10 debian-capi kernel: [ 65.277828] usb 1-3: New USB device found, idVendor=057c, idProduct=3800
Jul 18 15:11:10 debian-capi kernel: [ 65.277834] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul 18 15:11:10 debian-capi kernel: [ 65.277838] usb 1-3: Product: Bluetooth Device
Jul 18 15:11:10 debian-capi kernel: [ 65.277841] usb 1-3: Manufacturer: Bluetooth Device
Jul 18 15:11:10 debian-capi kernel: [ 65.277844] usb 1-3: SerialNumber: CC1C8D0E0400
Jul 18 15:11:10 debian-capi bluetoothd[2199]: HCI dev 0 registered
Jul 18 15:11:10 debian-capi bluetoothd[2199]: Listening for HCI events on hci0
Jul 18 15:11:11 debian-capi bluetoothd[2894]: Can't init device hci0: Invalid request code (56)

Quoted 1 line

any chance you can run btmon and see if we have failing HCI commands during the setup phase.

Sure! Here you are:

debian-capi:~# btmon
Bluetooth monitor ver 5.7
= New Index: 00:00:00:00:00:00 (BR/EDR,USB,hci0) [hci0] 0.025804
< HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 0.031045

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.037000

      Reset (0x03|0x0003) ncmd 1
        Status: Success (0x00)

< HCI Command: Read Local Supported Feat.. (0x04|0x0003) plen 0 [hci0] 0.037209

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.040740

Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0xff 0x05 0x00 0x18 0x18 0x00 0x00
3 slot packets
5 slot packets
Encryption
Slot offset
Timing accuracy
Role switch
Hold mode
Sniff mode
Park state
Power control requests
Channel quality driven data rate (CQDDR)
SCO link
HV2 packets
HV3 packets
u-law log synchronous data
A-law log synchronous data
CVSD synchronous data
Power control
AFH capable slave
AFH classification slave
AFH capable master
AFH classification master
< HCI Command: Read Local Version Inform.. (0x04|0x0001) plen 0 [hci0] 0.041025

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.043811

      Read Local Version Information (0x04|0x0001) ncmd 1
        Status: Success (0x00)
        HCI version: 2 - 0x2006
        LMP version: 2 - 0x1806
        Manufacturer: AVM Berlin (31)

< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 [hci0] 0.044100

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10 [hci0] 0.046722

      Read BD ADDR (0x04|0x0009) ncmd 1
        Status: Success (0x00)
        Address: 00:04:0E:8D:1C:CC (OUI 00-04-0E)

< HCI Command: Read Buffer Size (0x04|0x0005) plen 0 [hci0] 0.046988

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 11 [hci0] 0.050948

Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 120 ACL max packet: 20
SCO MTU: 24 SCO max packet: 5
< HCI Command: Read Class of Device (0x03|0x0023) plen 0 [hci0] 0.051235

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 7 [hci0] 0.055000

      Read Class of Device (0x03|0x0023) ncmd 1
        Status: Success (0x00)
        Class: 0x000000
          Major class: Miscellaneous
          Minor class: 0x00

< HCI Command: Read Local Name (0x03|0x0014) plen 0 [hci0] 0.055261

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 252 [hci0] 0.092918

      Read Local Name (0x03|0x0014) ncmd 1
        Status: Success (0x00)
        Name:

< HCI Command: Read Voice Setting (0x03|0x0025) plen 0 [hci0] 0.093212

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 6 [hci0] 0.096713

      Read Voice Setting (0x03|0x0025) ncmd 1
        Status: Success (0x00)
        Setting: 0x0060
< HCI Command: Set Event Filter (0x03|0x0005) plen 1 [hci0] 0.096974
        Type: 0x00

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.101024

      Set Event Filter (0x03|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: Write Connection Accept T.. (0x03|0x0016) plen 2 [hci0] 0.101262
        Timeout: 20000.000 msec (0x7d00)

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.105011

      Write Connection Accept Timeout (0x03|0x0016) ncmd 1
        Status: Success (0x00)

< HCI Command: Read Page Scan Activity (0x03|0x001b) plen 0 [hci0] 0.105254

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 8 [hci0] 0.108002

      Read Page Scan Activity (0x03|0x001b) ncmd 1
        Status: Success (0x00)
        Interval: 1280.000 msec (0x0800)
        Window: 11.250 msec (0x0012)

< HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 [hci0] 0.108255

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 5 [hci0] 0.111710

      Read Page Scan Type (0x03|0x0046) ncmd 1
        Status: Success (0x00)
        Type: Standard Scan (0x00)

< HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 0.111960
Mask: 0x00001807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete Synchronous Connection Complete
Synchronous Connection Changed

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.114810

      Set Event Mask (0x03|0x0001) ncmd 1
        Status: Success (0x00)

< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.114948

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4 [hci0] 0.117791

      Read Local Supported Commands (0x04|0x0002) ncmd 1
        Status: Unknown HCI Command (0x01)

< HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 0.121133

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.131017

      Reset (0x03|0x0003) ncmd 1
        Status: Success (0x00)

< HCI Command: Read Local Supported Feat.. (0x04|0x0003) plen 0 [hci0] 0.131157

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.134997

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.138030

      Read Local Version Information (0x04|0x0001) ncmd 1
        Status: Success (0x00)
        HCI version: 2 - 0x2006
        LMP version: 2 - 0x1806
        Manufacturer: AVM Berlin (31)

< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 [hci0] 0.138178

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10 [hci0] 0.141784

      Read BD ADDR (0x04|0x0009) ncmd 1
        Status: Success (0x00)
        Address: 00:04:0E:8D:1C:CC (OUI 00-04-0E)

< HCI Command: Read Buffer Size (0x04|0x0005) plen 0 [hci0] 0.141965

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 11 [hci0] 0.144741

Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 120 ACL max packet: 20
SCO MTU: 24 SCO max packet: 5
< HCI Command: Read Class of Device (0x03|0x0023) plen 0 [hci0] 0.144831

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 7 [hci0] 0.148377

      Read Class of Device (0x03|0x0023) ncmd 1
        Status: Success (0x00)
        Class: 0x000000
          Major class: Miscellaneous
          Minor class: 0x00

< HCI Command: Read Local Name (0x03|0x0014) plen 0 [hci0] 0.148518

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 252 [hci0] 0.187913

      Read Local Name (0x03|0x0014) ncmd 1
        Status: Success (0x00)
        Name:

< HCI Command: Read Voice Setting (0x03|0x0025) plen 0 [hci0] 0.188103

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 6 [hci0] 0.191659

      Read Voice Setting (0x03|0x0025) ncmd 1
        Status: Success (0x00)
        Setting: 0x0060
< HCI Command: Set Event Filter (0x03|0x0005) plen 1 [hci0] 0.191790
        Type: 0x00

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.195844

      Set Event Filter (0x03|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: Write Connection Accept T.. (0x03|0x0016) plen 2 [hci0] 0.195971
        Timeout: 20000.000 msec (0x7d00)

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.198667

      Write Connection Accept Timeout (0x03|0x0016) ncmd 1
        Status: Success (0x00)

< HCI Command: Read Page Scan Activity (0x03|0x001b) plen 0 [hci0] 0.198911

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 8 [hci0] 0.202899

      Read Page Scan Activity (0x03|0x001b) ncmd 1
        Status: Success (0x00)
        Interval: 1280.000 msec (0x0800)
        Window: 11.250 msec (0x0012)

< HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 [hci0] 0.203040

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 5 [hci0] 0.206659

      Read Page Scan Type (0x03|0x0046) ncmd 1
        Status: Success (0x00)
        Type: Standard Scan (0x00)

< HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 0.206842
Mask: 0x00001807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete Synchronous Connection Complete
Synchronous Connection Changed

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.209839

      Set Event Mask (0x03|0x0001) ncmd 1
        Status: Success (0x00)

< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361

      Read Local Supported Commands (0x04|0x0002) ncmd 1
        Status: Unknown HCI Command (0x01)

Quoted 3 lines

Quoted 2 lines
debian-capi:~# lsusb -v -d 057c:3800
Can you include /sys/kernel/debug/usb/devices from this device.

After mounting debugfs with

*mount -t debugfs none /sys/kernel/debug*

I got this:

debian-capi:~# cat /sys/kernel/debug/usb/devices

T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480  MxCh= 8
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0002 Rev= 3.10
S:  Manufacturer=Linux 3.10.1 ehci_hcd
S:  Product=EHCI Host Controller
S:  SerialNumber=0000:00:0b.0

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms

T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12   MxCh= 8
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1d6b ProdID=0001 Rev= 3.10
S:  Manufacturer=Linux 3.10.1 ohci_hcd
S:  Product=OHCI Host Controller
S:  SerialNumber=0000:00:06.0

C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=80ee ProdID=0021 Rev= 1.00
S:  Manufacturer=VirtualBox
S:  Product=USB Tablet

C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl=10ms

T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=02(comm.) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0675 ProdID=1688 Rev= 1.00
S:  Manufacturer=USB ISDN TA
S:  Product=USB ISDN TA
S:  SerialNumber=USB ISDN TA

C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 64mA
I:* If#= 0 Alt= 0 #EPs= 0 Cls=02(comm.) Sub=80 Prot=ff Driver=(none)
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=ff Driver=HFC-S_USB I:* If#= 1 Alt= 1 #EPs= 8 Cls=0a(data ) Sub=00 Prot=ff Driver=HFC-S_USB

E:  Ad=05(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=85(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=06(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=86(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=07(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=87(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=08(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=88(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 7 Cls=0a(data ) Sub=00 Prot=ff Driver=HFC-S_USB
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=4ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=4ms
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=16ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=4ms
I:  If#= 1 Alt= 3 #EPs= 8 Cls=0a(data ) Sub=00 Prot=ff Driver=HFC-S_USB
E:  Ad=03(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=05(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=85(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=06(O) Atr=01(Isoc) MxPS=  16 Ivl=1ms
E:  Ad=86(I) Atr=01(Isoc) MxPS=  16 Ivl=1ms

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#=  8 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=057c ProdID=3800 Rev=15.00
S:  Manufacturer=Bluetooth Device
S:  Product=Bluetooth Device
S:  SerialNumber=CC1C8D0E0400
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=200mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

debian-capi:~#

Oh i forgot to mention that I run this under Virtualbox 4.2.16 with Windows7 64bit host. I hope that i still get support?
If not I also can put this into some real hardware with latest kernel.

Signature · 1 line

Gruss, Joerg

Marcel Holtmann

maintainer

2013-07-19 13:49 UTC #3 lore raw

Hi Joerg,

Quoted 61 lines

Quoted 23 lines
Quoted 14 lines
don´t know if it is wrong to post under the same topic which is more than one year old. Ref to it is here.
http://www.spinics.net/lists/linux-bluetooth/msg18763.html
There was never an answer to the latest question from Michael if there will be a solution.
I also tried to get this to run with my latest kernel 3.10 under debian 7 without success. Will there be a solution or should I open my real trashbin?(other sticks are working so far for me) :)
Let me know if you need more info´s on that.
Thx,
Joerg
My syslog says:
Quoted 9 lines
Jul 18 15:11:10 debian-capi kernel: [ 64.808373] usb 1-3: new full-speed USB device number 5 using ohci_hcd
Jul 18 15:11:10 debian-capi kernel: [ 65.277828] usb 1-3: New USB device found, idVendor=057c, idProduct=3800
Jul 18 15:11:10 debian-capi kernel: [ 65.277834] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul 18 15:11:10 debian-capi kernel: [ 65.277838] usb 1-3: Product: Bluetooth Device
Jul 18 15:11:10 debian-capi kernel: [ 65.277841] usb 1-3: Manufacturer: Bluetooth Device
Jul 18 15:11:10 debian-capi kernel: [ 65.277844] usb 1-3: SerialNumber: CC1C8D0E0400
Jul 18 15:11:10 debian-capi bluetoothd[2199]: HCI dev 0 registered
Jul 18 15:11:10 debian-capi bluetoothd[2199]: Listening for HCI events on hci0
Jul 18 15:11:11 debian-capi bluetoothd[2894]: Can't init device hci0: Invalid request code (56)
Quoted 1 line
any chance you can run btmon and see if we have failing HCI commands during the setup phase.
Sure! Here you are:
debian-capi:~# btmon
Bluetooth monitor ver 5.7
= New Index: 00:00:00:00:00:00 (BR/EDR,USB,hci0) [hci0] 0.025804
< HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 0.031045
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.037000
     Reset (0x03|0x0003) ncmd 1
       Status: Success (0x00)
< HCI Command: Read Local Supported Feat.. (0x04|0x0003) plen 0 [hci0] 0.037209
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.040740
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0xff 0x05 0x00 0x18 0x18 0x00 0x00
3 slot packets
5 slot packets
Encryption
Slot offset
Timing accuracy
Role switch
Hold mode
Sniff mode
Park state
Power control requests
Channel quality driven data rate (CQDDR)
SCO link
HV2 packets
HV3 packets
u-law log synchronous data
A-law log synchronous data
CVSD synchronous data
Power control
AFH capable slave
AFH classification slave
AFH capable master
AFH classification master
< HCI Command: Read Local Version Inform.. (0x04|0x0001) plen 0 [hci0] 0.041025

Quoted 6 lines

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.043811

     Read Local Version Information (0x04|0x0001) ncmd 1
       Status: Success (0x00)
       HCI version: 2 - 0x2006
       LMP version: 2 - 0x1806
       Manufacturer: AVM Berlin (31)

it declares itself here as Bluetooth 1.2 device. Which means it is the second generation of BlueFritz! USB device.

<snip>

Quoted 4 lines

< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361
     Read Local Supported Commands (0x04|0x0002) ncmd 1
       Status: Unknown HCI Command (0x01)

And here is your failing command. Newer kernels have been strict with failing commands and will just abort the setup if anything goes wrong.

Johan, we need to figure out on how to work around this one. Might just match for the manufacturer before sending the command.

Quoted 10 lines

Quoted 2 lines
Quoted 1 line
debian-capi:~# lsusb -v -d 057c:3800
Can you include /sys/kernel/debug/usb/devices from this device.
After mounting debugfs with
*mount -t debugfs none /sys/kernel/debug*
I got this:
debian-capi:~# cat /sys/kernel/debug/usb/devices

<snip>

Quoted 21 lines

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#=  8 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=057c ProdID=3800 Rev=15.00
S:  Manufacturer=Bluetooth Device
S:  Product=Bluetooth Device
S:  SerialNumber=CC1C8D0E0400
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=200mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb

Quoted 8 lines

E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Sorry to make you jump through this hoop, but I needed to know which version of the dongle it is. The first version has its own driver.

Quoted 5 lines

debian-capi:~#
Oh i forgot to mention that I run this under Virtualbox 4.2.16 with Windows7 64bit host. I hope that i still get support?
If not I also can put this into some real hardware with latest kernel.

I think the issue is pretty clear.

Regards

Marcel

Johan Hedberg

2013-07-19 16:20 UTC #4 lore raw

Hi Marcel,

Quoted 14 lines · Marcel Holtmann

Quoted 6 lines
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.043811
     Read Local Version Information (0x04|0x0001) ncmd 1
       Status: Success (0x00)
       HCI version: 2 - 0x2006
       LMP version: 2 - 0x1806
       Manufacturer: AVM Berlin (31)
it declares itself here as Bluetooth 1.2 device. Which means it is the second generation of BlueFritz! USB device.
<snip>
Quoted 2 lines
< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361

Quoted 8 lines

Quoted 2 lines
     Read Local Supported Commands (0x04|0x0002) ncmd 1
       Status: Unknown HCI Command (0x01)
And here is your failing command. Newer kernels have been strict with failing commands and will just abort the setup if anything goes wrong.
Johan, we need to figure out on how to work around this one. Might just match for the manufacturer before sending the command.

Either that or a quirk based on the USB id. Wouldn't matching just the manufacturer be a bit problematic for any newer chips from this company, or they stopped doing Bluetooth dongles after this one?

Johan

Jörg Esser

author

2013-07-22 07:10 UTC #5 lore raw

Quoted 18 lines · Johan Hedberg

Hi Marcel,
Quoted 15 lines · Marcel Holtmann
Quoted 6 lines
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.043811
      Read Local Version Information (0x04|0x0001) ncmd 1
        Status: Success (0x00)
        HCI version: 2 - 0x2006
        LMP version: 2 - 0x1806
        Manufacturer: AVM Berlin (31)
it declares itself here as Bluetooth 1.2 device. Which means it is the second generation of BlueFritz! USB device.
<snip>
Quoted 4 lines
< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361
      Read Local Supported Commands (0x04|0x0002) ncmd 1
        Status: Unknown HCI Command (0x01)

Quoted 8 lines

Quoted 5 lines
And here is your failing command. Newer kernels have been strict with failing commands and will just abort the setup if anything goes wrong.
Johan, we need to figure out on how to work around this one. Might just match for the manufacturer before sending the command.
Either that or a quirk based on the USB id. Wouldn't matching just the manufacturer be a bit problematic for any newer chips from this company, or they stopped doing Bluetooth dongles after this one?

They stopped doing Bluetooth dongles after this one. I found no more Product with bluetooth on their website. The support from AVM endet on 01.12.2009.
As I read here http://www.wehavemorefun.de/fritzbox/BlueFRITZ!_USB

Should I open my trashbin?

Signature · 1 line

Gruss, Joerg

Marcel Holtmann

maintainer

2013-07-22 14:22 UTC #6 lore raw

Hi Johan,

Quoted 18 lines

Quoted 18 lines
Quoted 18 lines
Quoted 6 lines
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.043811
     Read Local Version Information (0x04|0x0001) ncmd 1
       Status: Success (0x00)
       HCI version: 2 - 0x2006
       LMP version: 2 - 0x1806
       Manufacturer: AVM Berlin (31)
it declares itself here as Bluetooth 1.2 device. Which means it is the second generation of BlueFritz! USB device.
<snip>
Quoted 4 lines
< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361
     Read Local Supported Commands (0x04|0x0002) ncmd 1
       Status: Unknown HCI Command (0x01)
And here is your failing command. Newer kernels have been strict with failing commands and will just abort the setup if anything goes wrong.

Quoted 8 lines

Quoted 5 lines
Quoted 2 lines
Johan, we need to figure out on how to work around this one. Might just match for the manufacturer before sending the command.
Either that or a quirk based on the USB id. Wouldn't matching just the manufacturer be a bit problematic for any newer chips from this company, or they stopped doing Bluetooth dongles after this one?
They stopped doing Bluetooth dongles after this one. I found no more Product with bluetooth on their website. The support from AVM endet on 01.12.2009.
As I read here http://www.wehavemorefun.de/fritzbox/BlueFRITZ!_USB

yes, they ever only made two products. And their baseband was based on Silicon Wave which actually got bought by Qualcomm if I remember this correctly. So going by the manufacturer id and adding a good comment into the code might make this work nicely again.

Johan, if you prefer a quirk, then go for that one.

Quoted 1 line

Should I open my trash bin?

It is nice to have these old-timers around. And we do want to make them work. Knowing where they fail is actually pretty good. Then again, it is a Bluetooth 1.2 dongle and your are missing features like Secure Simple Pairing or Low Energy.

Regards

Marcel

Johan Hedberg

2013-07-23 23:39 UTC #7 lore raw

Hi Marcel,

Quoted 28 lines · Marcel Holtmann

Quoted 20 lines
Quoted 20 lines
Quoted 20 lines
Quoted 6 lines
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.043811
     Read Local Version Information (0x04|0x0001) ncmd 1
       Status: Success (0x00)
       HCI version: 2 - 0x2006
       LMP version: 2 - 0x1806
       Manufacturer: AVM Berlin (31)
it declares itself here as Bluetooth 1.2 device. Which means it is the second generation of BlueFritz! USB device.
<snip>
Quoted 4 lines
< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361
     Read Local Supported Commands (0x04|0x0002) ncmd 1
       Status: Unknown HCI Command (0x01)
And here is your failing command. Newer kernels have been strict with failing commands and will just abort the setup if anything goes wrong.
Johan, we need to figure out on how to work around this one. Might just match for the manufacturer before sending the command.
Quoted 7 lines
Quoted 3 lines
Either that or a quirk based on the USB id. Wouldn't matching just the manufacturer be a bit problematic for any newer chips from this company, or they stopped doing Bluetooth dongles after this one?
They stopped doing Bluetooth dongles after this one. I found no more Product with bluetooth on their website.
The support from AVM endet on 01.12.2009.
As I read here http://www.wehavemorefun.de/fritzbox/BlueFRITZ!_USB

Quoted 6 lines

yes, they ever only made two products. And their baseband was based on Silicon Wave which actually got bought by Qualcomm if I remember this correctly. So going by the manufacturer id and adding a good comment into the code might make this work nicely again.
Johan, if you prefer a quirk, then go for that one.

Since we know that these are the only pieces of hardware that exist with this manufacturer id I think it's simplest to just use that instead of creating more code for this.

Attached is a patch that still needs to be tested. It might e.g. reveal other commands that also fail with this hardware.

Johan

Quoted 1 line

From 6c95ba1014b1949543fb16d3999fa3ed58e0f0d5 Mon Sep 17 00:00:00 2001

From: Johan Hedberg <[email protected]>
Date: Wed, 24 Jul 2013 02:32:46 +0300
Subject: [PATCH] Bluetooth: Fix HCI init for BlueFRITZ! devices

None of the BlueFRITZ! devices with manufacurer ID 31 (AVM Berlin) support HCI_Read_Local_Supported_Commands. It is safe to use the manufacturer ID (instead of e.g. a USB ID specific quirk) because the company never created any newer controllers.

Signed-off-by Johan Hedberg <[email protected]>

---
 net/bluetooth/hci_core.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

net/bluetooth/hci_core.c +4 -1

index dc34bfa..d651aa7 100644
@@ -513,7 +513,10 @@ static void hci_init2_req(struct hci_request *req, unsigned long opt)
 
 	hci_setup_event_mask(req);
 
-	if (hdev->hci_ver > BLUETOOTH_VER_1_1)
+	/* AVM Berlin (31), aka "BlueFRITZ!", doesn't support the read
+	 * local supported commands HCI command.
+	 */
+	if (hdev->manufacturer != 31 && hdev->hci_ver > BLUETOOTH_VER_1_1)
 		hci_req_add(req, HCI_OP_READ_LOCAL_COMMANDS, 0, NULL);
 
 	if (lmp_ssp_capable(hdev)) {

Signature · 1 line

1.8.3.2

Jörg Esser

author

2013-07-25 09:10 UTC #8 lore raw

Quoted 36 lines · Johan Hedberg

Hi Marcel,
Quoted 27 lines · Marcel Holtmann
Quoted 20 lines
Quoted 20 lines
Quoted 20 lines
Quoted 6 lines
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.043811
      Read Local Version Information (0x04|0x0001) ncmd 1
        Status: Success (0x00)
        HCI version: 2 - 0x2006
        LMP version: 2 - 0x1806
        Manufacturer: AVM Berlin (31)
it declares itself here as Bluetooth 1.2 device. Which means it is the second generation of BlueFritz! USB device.
<snip>
Quoted 4 lines
< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361
      Read Local Supported Commands (0x04|0x0002) ncmd 1
        Status: Unknown HCI Command (0x01)
And here is your failing command. Newer kernels have been strict with failing commands and will just abort the setup if anything goes wrong.
Johan, we need to figure out on how to work around this one. Might just match for the manufacturer before sending the command.
Quoted 7 lines
Quoted 3 lines
Either that or a quirk based on the USB id. Wouldn't matching just the manufacturer be a bit problematic for any newer chips from this company, or they stopped doing Bluetooth dongles after this one?
They stopped doing Bluetooth dongles after this one. I found no more Product with bluetooth on their website.
The support from AVM endet on 01.12.2009.
As I read herehttp://www.wehavemorefun.de/fritzbox/BlueFRITZ!_USB
Quoted 6 lines
yes, they ever only made two products. And their baseband was based on Silicon Wave which actually got bought by Qualcomm if I remember this correctly. So going by the manufacturer id and adding a good comment into the code might make this work nicely again.
Johan, if you prefer a quirk, then go for that one.

Quoted 8 lines

Since we know that these are the only pieces of hardware that exist with this manufacturer id I think it's simplest to just use that instead of creating more code for this.
Attached is a patch that still needs to be tested. It might e.g. reveal other commands that also fail with this hardware.
Johan

After appling your patch I can use the adapter.
syslog says:

Jul 24 16:21:31 debian-capi kernel: [  153.864308] usb 1-3: new full-speed USB device number 4 using ohci_hcd
Jul 24 16:21:31 debian-capi kernel: [  154.120244] usb 1-3: New USB device found, idVendor=057c, idProduct=3800
Jul 24 16:21:31 debian-capi kernel: [  154.120251] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul 24 16:21:31 debian-capi kernel: [  154.120254] usb 1-3: Product: Bluetooth Device
Jul 24 16:21:31 debian-capi kernel: [  154.120257] usb 1-3: Manufacturer: Bluetooth Device
Jul 24 16:21:31 debian-capi kernel: [  154.120260] usb 1-3: SerialNumber: CC1C8D0E0400
Jul 24 16:21:31 debian-capi bluetoothd[2203]: HCI dev 0 registered
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Listening for HCI events on hci0
Jul 24 16:21:31 debian-capi kernel: [  154.149949] usbcore: registered new interface driver btusb
Jul 24 16:21:31 debian-capi bluetoothd[2203]: HCI dev 0 up
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Proximity GATT Reporter Driver: Operation not permitted (1)
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Unable to load keys to adapter_ops: Function not implemented (38)
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Adapter /org/bluez/2203/hci0 has been enabled

after scanning with hcitool scan, it finds my BT Speaker btmon says:

btmon
Bluetooth monitor ver 5.7
= New Index: 00:00:00:00:00:00 (BR/EDR,USB,hci0) [hci0] 0.767719 < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 0.773725

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.781039

      Reset (0x03|0x0003) ncmd 1
        Status: Success (0x00)

< HCI Command: Read Local Supported Fea.. (0x04|0x0003) plen 0 [hci0] 0.781774

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.785505

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.788286

      Read Local Version Information (0x04|0x0001) ncmd 1
        Status: Success (0x00)
        HCI version: 2 - 0x2006
        LMP version: 2 - 0x1806
        Manufacturer: AVM Berlin (31)

< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 [hci0] 0.788360

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 10 [hci0] 0.791218

      Read BD ADDR (0x04|0x0009) ncmd 1
        Status: Success (0x00)
        Address: 00:04:0E:8D:1C:CC (OUI 00-04-0E)

< HCI Command: Read Buffer Size (0x04|0x0005) plen 0 [hci0] 0.791858

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 11 [hci0] 0.794638

Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 120 ACL max packet: 20
SCO MTU: 24 SCO max packet: 5
< HCI Command: Read Class of Device (0x03|0x0023) plen 0 [hci0] 0.794704

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 7 [hci0] 0.798330

      Read Class of Device (0x03|0x0023) ncmd 1
        Status: Success (0x00)
        Class: 0x000000
          Major class: Miscellaneous
          Minor class: 0x00

< HCI Command: Read Local Name (0x03|0x0014) plen 0 [hci0] 0.798394

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 252 [hci0] 0.836309

      Read Local Name (0x03|0x0014) ncmd 1
        Status: Success (0x00)
        Name:

< HCI Command: Read Voice Setting (0x03|0x0025) plen 0 [hci0] 0.836479

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 6 [hci0] 0.839240

      Read Voice Setting (0x03|0x0025) ncmd 1
        Status: Success (0x00)
        Setting: 0x0060
< HCI Command: Set Event Filter (0x03|0x0005) plen 1 [hci0] 0.839409
        Type: 0x00

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.842197

      Set Event Filter (0x03|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: Write Connection Accept... (0x03|0x0016) plen 2 [hci0] 0.842365
        Timeout: 20000.000 msec (0x7d00)

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.845015

      Write Connection Accept Timeout (0x03|0x0016) ncmd 1
        Status: Success (0x00)

< HCI Command: Read Page Scan Activity (0x03|0x001b) plen 0 [hci0] 0.845182

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 8 [hci0] 0.849023

      Read Page Scan Activity (0x03|0x001b) ncmd 1
        Status: Success (0x00)
        Interval: 1280.000 msec (0x0800)
        Window: 11.250 msec (0x0012)

< HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 [hci0] 0.849185

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 5 [hci0] 0.853008

      Read Page Scan Type (0x03|0x0046) ncmd 1
        Status: Success (0x00)
        Type: Standard Scan (0x00)

< HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 0.853166
Mask: 0x00001807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete Synchronous Connection Complete
Synchronous Connection Changed

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.857379

      Set Event Mask (0x03|0x0001) ncmd 1
        Status: Success (0x00)
< HCI Command: Write Page Timeout (0x03|0x0018) plen 2 [hci0] 0.858038
        Timeout: 5120.000 msec (0x2000)

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.859862

      Write Page Timeout (0x03|0x0018) ncmd 1
        Status: Success (0x00)
< HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 [hci0] 0.859932
        Address: 00:00:00:00:00:00 (OUI 00-00-00)
        Read all: 0x01

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 8 [hci0] 0.863627

Read Stored Link Key (0x03|0x000d) ncmd 1
Status: Success (0x00)
Max num keys: 8
Num keys: 0
< HCI Command: Write Local Name (0x03|0x0013) plen 248 [hci0] 0.882030
Name: debian-capi-0

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.885847

      Write Local Name (0x03|0x0013) ncmd 1
        Status: Success (0x00)

< HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 0.917369
Mask: 0x00001807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete Synchronous Connection Complete
Synchronous Connection Changed

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.924343

      Set Event Mask (0x03|0x0001) ncmd 1
        Status: Success (0x00)
< HCI Command: Write Default Link Polic.. (0x02|0x000f) plen 2 [hci0] 0.924523
        Link policy: 0x000f

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4 [hci0] 0.928050

      Write Default Link Policy Settings (0x02|0x000f) ncmd 1
        Status: Unknown HCI Command (0x01)

< HCI Command: Write Class of Device (0x03|0x0024) plen 3 [hci0] 0.928289
Class: 0x6e0100
Major class: Computer (desktop, notebook, PDA, organizers) Minor class: Uncategorized, code for device not assigned Networking (LAN, Ad hoc)
Rendering (Printing, Speaker)
Capturing (Scanner, Microphone)
Audio (Speaker, Microphone, Headset)
Telephony (Cordless telephony, Modem, Headset)

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.931044

      Write Class of Device (0x03|0x0024) ncmd 1
        Status: Success (0x00)
< HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] 0.931274
        Scan enable: Page Scan (0x02)

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.934042

      Write Scan Enable (0x03|0x001a) ncmd 1
        Status: Success (0x00)

< HCI Command: Read Local Name (0x03|0x0014) plen 0 [hci0] 0.934286 @ New Settings: 0x0093
powered connectable pairable br/edr

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 252 [hci0] 0.974894

      Read Local Name (0x03|0x0014) ncmd 1
        Status: Success (0x00)
        Name: debian-capi-0

< HCI Command: Read Scan Enable (0x03|0x0019) plen 0 [hci0] 0.975018

Quoted 1 line

HCI Event: Command Complete (0x0e) plen 5 [hci0] 0.978549

      Read Scan Enable (0x03|0x0019) ncmd 1
        Status: Success (0x00)
        Scan enable: Page Scan (0x02)
< HCI Command: Inquiry (0x01|0x0001) plen 5 [hci0] 159.025599
        Access code: 0x9e8b33 (General Inquiry)
        Length: 10.24s (0x08)
        Num responses: 0

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4 [hci0] 159.033290

      Inquiry (0x01|0x0001) ncmd 1
        Status: Success (0x00)

@ Discovering: 0x01 (0)

Quoted 1 line

HCI Event: Inquiry Result (0x02) plen 15 [hci0] 165.868687

        Num responses: 1
        Address: A0:E9:DB:00:B5:BB (OUI A0-E9-DB)
        Page scan repetition mode: R1 (0x01)
        Page period mode: P2 (0x02)
        Page scan mode: Mandatory (0x00)
        Class: 0x240404
          Major class: Audio/Video (headset, speaker, stereo, video, vcr)
          Minor class: 0x01
          Rendering (Printing, Speaker)
          Audio (Speaker, Microphone, Headset)
        Clock offset: 0x14a9
@ Device Found: A0:E9:DB:00:B5:BB (0) rssi 0 flags 0x0003
        04 0d 04 04 24                                   ....$

Quoted 1 line

HCI Event: Inquiry Complete (0x01) plen 1 [hci0] 169.281636

        Status: Success (0x00)
< HCI Command: Remote Name Request (0x01|0x0019) plen 10 [hci0] 169.282228
        Address: A0:E9:DB:00:B5:BB (OUI A0-E9-DB)
        Page scan repetition mode: R1 (0x01)
        Page scan mode: Mandatory (0x00)
        Clock offset: 0x94a9

Quoted 1 line

HCI Event: Command Status (0x0f) plen 4 [hci0] 169.288567

      Remote Name Request (0x01|0x0019) ncmd 1
        Status: Success (0x00)

Quoted 1 line

HCI Event: Remote Name Req Complete (0x07) plen 255 [hci0] 169.877365

        Status: Success (0x00)
        Address: A0:E9:DB:00:B5:BB (OUI A0-E9-DB)
        Name: RAIKKO BT Speaker

Playing Audio with
mplayer -ao alsa:device=btheadset 05N\ The\ Race\ -\ .mp3

Also works nicely. Let me know if I should test anything else.

Thx for this good and fast support.

Signature · 1 line

Gruss, Joerg

Gustavo Padovan

2013-07-25 10:55 UTC #9 lore raw

Hi,

Quoted 341 lines · Jörg Esser

Quoted 36 lines · Johan Hedberg
Hi Marcel,
Quoted 27 lines · Marcel Holtmann
Quoted 20 lines
Quoted 20 lines
Quoted 20 lines
Quoted 6 lines
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.043811
     Read Local Version Information (0x04|0x0001) ncmd 1
       Status: Success (0x00)
       HCI version: 2 - 0x2006
       LMP version: 2 - 0x1806
       Manufacturer: AVM Berlin (31)
it declares itself here as Bluetooth 1.2 device. Which means it is the second generation of BlueFritz! USB device.
<snip>
Quoted 4 lines
< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361
     Read Local Supported Commands (0x04|0x0002) ncmd 1
       Status: Unknown HCI Command (0x01)
And here is your failing command. Newer kernels have been strict with failing commands and will just abort the setup if anything goes wrong.
Johan, we need to figure out on how to work around this one. Might just match for the manufacturer before sending the command.
Quoted 7 lines
Quoted 3 lines
Either that or a quirk based on the USB id. Wouldn't matching just the manufacturer be a bit problematic for any newer chips from this company, or they stopped doing Bluetooth dongles after this one?
They stopped doing Bluetooth dongles after this one. I found no more Product with bluetooth on their website.
The support from AVM endet on 01.12.2009.
As I read herehttp://www.wehavemorefun.de/fritzbox/BlueFRITZ!_USB
Quoted 6 lines
yes, they ever only made two products. And their baseband was based on Silicon Wave which actually got bought by Qualcomm if I remember this correctly. So going by the manufacturer id and adding a good comment into the code might make this work nicely again.
Johan, if you prefer a quirk, then go for that one.
Quoted 8 lines
Since we know that these are the only pieces of hardware that exist with this manufacturer id I think it's simplest to just use that instead of creating more code for this.
Attached is a patch that still needs to be tested. It might e.g. reveal other commands that also fail with this hardware.
Johan
After appling your patch I can use the adapter.
syslog says:
Jul 24 16:21:31 debian-capi kernel: [  153.864308] usb 1-3: new
full-speed USB device number 4 using ohci_hcd
Jul 24 16:21:31 debian-capi kernel: [  154.120244] usb 1-3: New USB
device found, idVendor=057c, idProduct=3800
Jul 24 16:21:31 debian-capi kernel: [  154.120251] usb 1-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Jul 24 16:21:31 debian-capi kernel: [  154.120254] usb 1-3: Product:
Bluetooth Device
Jul 24 16:21:31 debian-capi kernel: [  154.120257] usb 1-3:
Manufacturer: Bluetooth Device
Jul 24 16:21:31 debian-capi kernel: [  154.120260] usb 1-3:
SerialNumber: CC1C8D0E0400
Jul 24 16:21:31 debian-capi bluetoothd[2203]: HCI dev 0 registered
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Listening for HCI
events on hci0
Jul 24 16:21:31 debian-capi kernel: [  154.149949] usbcore:
registered new interface driver btusb
Jul 24 16:21:31 debian-capi bluetoothd[2203]: HCI dev 0 up
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Proximity GATT
Reporter Driver: Operation not permitted (1)
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Unable to load keys to
adapter_ops: Function not implemented (38)
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Adapter
/org/bluez/2203/hci0 has been enabled
after scanning with hcitool scan, it finds my BT Speaker btmon says:
btmon
Bluetooth monitor ver 5.7
= New Index: 00:00:00:00:00:00 (BR/EDR,USB,hci0) [hci0] 0.767719 < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 0.773725
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.781039
      Reset (0x03|0x0003) ncmd 1
        Status: Success (0x00)
< HCI Command: Read Local Supported Fea.. (0x04|0x0003) plen 0 [hci0] 0.781774
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.785505
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0xff 0x05 0x00 0x18 0x18 0x00 0x00
3 slot packets
5 slot packets
Encryption
Slot offset
Timing accuracy
Role switch
Hold mode
Sniff mode
Park state
Power control requests
Channel quality driven data rate (CQDDR) SCO link
HV2 packets
HV3 packets
u-law log synchronous data
A-law log synchronous data
CVSD synchronous data
Power control
AFH capable slave
AFH classification slave
AFH capable master
AFH classification master
< HCI Command: Read Local Version Infor.. (0x04|0x0001) plen 0 [hci0] 0.785575
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.788286
      Read Local Version Information (0x04|0x0001) ncmd 1
        Status: Success (0x00)
        HCI version: 2 - 0x2006
        LMP version: 2 - 0x1806
        Manufacturer: AVM Berlin (31)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 [hci0] 0.788360
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 10 [hci0] 0.791218
      Read BD ADDR (0x04|0x0009) ncmd 1
        Status: Success (0x00)
        Address: 00:04:0E:8D:1C:CC (OUI 00-04-0E)
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0 [hci0] 0.791858
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 11 [hci0] 0.794638
Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 120 ACL max packet: 20
SCO MTU: 24 SCO max packet: 5
< HCI Command: Read Class of Device (0x03|0x0023) plen 0 [hci0] 0.794704
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 7 [hci0] 0.798330
      Read Class of Device (0x03|0x0023) ncmd 1
        Status: Success (0x00)
        Class: 0x000000
          Major class: Miscellaneous
          Minor class: 0x00
< HCI Command: Read Local Name (0x03|0x0014) plen 0 [hci0] 0.798394
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 252 [hci0] 0.836309
      Read Local Name (0x03|0x0014) ncmd 1
        Status: Success (0x00)
        Name:
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0 [hci0] 0.836479
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 6 [hci0] 0.839240
      Read Voice Setting (0x03|0x0025) ncmd 1
        Status: Success (0x00)
        Setting: 0x0060
< HCI Command: Set Event Filter (0x03|0x0005) plen 1 [hci0] 0.839409
        Type: 0x00
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.842197
      Set Event Filter (0x03|0x0005) ncmd 1
        Status: Success (0x00)
< HCI Command: Write Connection Accept... (0x03|0x0016) plen 2
[hci0] 0.842365
        Timeout: 20000.000 msec (0x7d00)
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.845015
      Write Connection Accept Timeout (0x03|0x0016) ncmd 1
        Status: Success (0x00)
< HCI Command: Read Page Scan Activity (0x03|0x001b) plen 0 [hci0] 0.845182
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 8 [hci0] 0.849023
      Read Page Scan Activity (0x03|0x001b) ncmd 1
        Status: Success (0x00)
        Interval: 1280.000 msec (0x0800)
        Window: 11.250 msec (0x0012)
< HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 [hci0] 0.849185
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 5 [hci0] 0.853008
      Read Page Scan Type (0x03|0x0046) ncmd 1
        Status: Success (0x00)
        Type: Standard Scan (0x00)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 0.853166
Mask: 0x00001807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete Synchronous Connection Complete
Synchronous Connection Changed
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.857379
      Set Event Mask (0x03|0x0001) ncmd 1
        Status: Success (0x00)
< HCI Command: Write Page Timeout (0x03|0x0018) plen 2 [hci0] 0.858038
        Timeout: 5120.000 msec (0x2000)
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.859862
      Write Page Timeout (0x03|0x0018) ncmd 1
        Status: Success (0x00)
< HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 [hci0] 0.859932
        Address: 00:00:00:00:00:00 (OUI 00-00-00)
        Read all: 0x01
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 8 [hci0] 0.863627
Read Stored Link Key (0x03|0x000d) ncmd 1
Status: Success (0x00)
Max num keys: 8
Num keys: 0
< HCI Command: Write Local Name (0x03|0x0013) plen 248 [hci0] 0.882030
Name: debian-capi-0
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.885847
      Write Local Name (0x03|0x0013) ncmd 1
        Status: Success (0x00)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 0.917369
Mask: 0x00001807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete Synchronous Connection Complete
Synchronous Connection Changed
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.924343
      Set Event Mask (0x03|0x0001) ncmd 1
        Status: Success (0x00)
< HCI Command: Write Default Link Polic.. (0x02|0x000f) plen 2
[hci0] 0.924523
        Link policy: 0x000f
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 0.928050
      Write Default Link Policy Settings (0x02|0x000f) ncmd 1
        Status: Unknown HCI Command (0x01)
< HCI Command: Write Class of Device (0x03|0x0024) plen 3 [hci0] 0.928289
Class: 0x6e0100
Major class: Computer (desktop, notebook, PDA, organizers) Minor class: Uncategorized, code for device not assigned Networking (LAN, Ad hoc)
Rendering (Printing, Speaker)
Capturing (Scanner, Microphone)
Audio (Speaker, Microphone, Headset)
Telephony (Cordless telephony, Modem, Headset)
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.931044
      Write Class of Device (0x03|0x0024) ncmd 1
        Status: Success (0x00)
< HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] 0.931274
        Scan enable: Page Scan (0x02)
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.934042
      Write Scan Enable (0x03|0x001a) ncmd 1
        Status: Success (0x00)
< HCI Command: Read Local Name (0x03|0x0014) plen 0 [hci0] 0.934286 @ New Settings: 0x0093
powered connectable pairable br/edr
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 252 [hci0] 0.974894
      Read Local Name (0x03|0x0014) ncmd 1
        Status: Success (0x00)
        Name: debian-capi-0
< HCI Command: Read Scan Enable (0x03|0x0019) plen 0 [hci0] 0.975018
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 5 [hci0] 0.978549
      Read Scan Enable (0x03|0x0019) ncmd 1
        Status: Success (0x00)
        Scan enable: Page Scan (0x02)
< HCI Command: Inquiry (0x01|0x0001) plen 5 [hci0] 159.025599
        Access code: 0x9e8b33 (General Inquiry)
        Length: 10.24s (0x08)
        Num responses: 0
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 159.033290
      Inquiry (0x01|0x0001) ncmd 1
        Status: Success (0x00)
@ Discovering: 0x01 (0)
Quoted 1 line
HCI Event: Inquiry Result (0x02) plen 15 [hci0] 165.868687
        Num responses: 1
        Address: A0:E9:DB:00:B5:BB (OUI A0-E9-DB)
        Page scan repetition mode: R1 (0x01)
        Page period mode: P2 (0x02)
        Page scan mode: Mandatory (0x00)
        Class: 0x240404
          Major class: Audio/Video (headset, speaker, stereo, video, vcr)
          Minor class: 0x01
          Rendering (Printing, Speaker)
          Audio (Speaker, Microphone, Headset)
        Clock offset: 0x14a9
@ Device Found: A0:E9:DB:00:B5:BB (0) rssi 0 flags 0x0003
        04 0d 04 04 24                                   ....$
Quoted 1 line
HCI Event: Inquiry Complete (0x01) plen 1 [hci0] 169.281636
        Status: Success (0x00)
< HCI Command: Remote Name Request (0x01|0x0019) plen 10 [hci0] 169.282228
        Address: A0:E9:DB:00:B5:BB (OUI A0-E9-DB)
        Page scan repetition mode: R1 (0x01)
        Page scan mode: Mandatory (0x00)
        Clock offset: 0x94a9
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 169.288567
      Remote Name Request (0x01|0x0019) ncmd 1
        Status: Success (0x00)
Quoted 1 line
HCI Event: Remote Name Req Complete (0x07) plen 255 [hci0] 169.877365
        Status: Success (0x00)
        Address: A0:E9:DB:00:B5:BB (OUI A0-E9-DB)
        Name: RAIKKO BT Speaker

Quoted 6 lines

Playing Audio with
mplayer -ao alsa:device=btheadset 05N\ The\ Race\ -\ .mp3
Also works nicely. Let me know if I should test anything else.
Thx for this good and fast support.

Patch has been applied to bluetooth.git. Thanks everyone.

Gustavo

Marcel Holtmann

maintainer

2013-07-25 14:51 UTC #10 lore raw

Hi Gustavo,

Quoted 337 lines

Quoted 337 lines
Quoted 33 lines
Quoted 27 lines
Quoted 20 lines
Quoted 20 lines
Quoted 20 lines
Quoted 6 lines
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.043811
    Read Local Version Information (0x04|0x0001) ncmd 1
      Status: Success (0x00)
      HCI version: 2 - 0x2006
      LMP version: 2 - 0x1806
      Manufacturer: AVM Berlin (31)
it declares itself here as Bluetooth 1.2 device. Which means it is the second generation of BlueFritz! USB device.
<snip>
Quoted 4 lines
< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361
    Read Local Supported Commands (0x04|0x0002) ncmd 1
      Status: Unknown HCI Command (0x01)
And here is your failing command. Newer kernels have been strict with failing commands and will just abort the setup if anything goes wrong.
Johan, we need to figure out on how to work around this one. Might just match for the manufacturer before sending the command.
Quoted 7 lines
Quoted 3 lines
Either that or a quirk based on the USB id. Wouldn't matching just the manufacturer be a bit problematic for any newer chips from this company, or they stopped doing Bluetooth dongles after this one?
They stopped doing Bluetooth dongles after this one. I found no more Product with bluetooth on their website.
The support from AVM endet on 01.12.2009.
As I read herehttp://www.wehavemorefun.de/fritzbox/BlueFRITZ!_USB
Quoted 6 lines
yes, they ever only made two products. And their baseband was based on Silicon Wave which actually got bought by Qualcomm if I remember this correctly. So going by the manufacturer id and adding a good comment into the code might make this work nicely again.
Johan, if you prefer a quirk, then go for that one.
Quoted 8 lines
Since we know that these are the only pieces of hardware that exist with this manufacturer id I think it's simplest to just use that instead of creating more code for this.
Attached is a patch that still needs to be tested. It might e.g. reveal other commands that also fail with this hardware.
Johan
After appling your patch I can use the adapter.
syslog says:
Jul 24 16:21:31 debian-capi kernel: [  153.864308] usb 1-3: new
full-speed USB device number 4 using ohci_hcd
Jul 24 16:21:31 debian-capi kernel: [  154.120244] usb 1-3: New USB
device found, idVendor=057c, idProduct=3800
Jul 24 16:21:31 debian-capi kernel: [  154.120251] usb 1-3: New USB
device strings: Mfr=1, Product=2, SerialNumber=3
Jul 24 16:21:31 debian-capi kernel: [  154.120254] usb 1-3: Product:
Bluetooth Device
Jul 24 16:21:31 debian-capi kernel: [  154.120257] usb 1-3:
Manufacturer: Bluetooth Device
Jul 24 16:21:31 debian-capi kernel: [  154.120260] usb 1-3:
SerialNumber: CC1C8D0E0400
Jul 24 16:21:31 debian-capi bluetoothd[2203]: HCI dev 0 registered
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Listening for HCI
events on hci0
Jul 24 16:21:31 debian-capi kernel: [  154.149949] usbcore:
registered new interface driver btusb
Jul 24 16:21:31 debian-capi bluetoothd[2203]: HCI dev 0 up
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Proximity GATT
Reporter Driver: Operation not permitted (1)
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Unable to load keys to
adapter_ops: Function not implemented (38)
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Adapter
/org/bluez/2203/hci0 has been enabled
after scanning with hcitool scan, it finds my BT Speaker btmon says:
btmon
Bluetooth monitor ver 5.7
= New Index: 00:00:00:00:00:00 (BR/EDR,USB,hci0) [hci0] 0.767719 < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 0.773725
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.781039
     Reset (0x03|0x0003) ncmd 1
       Status: Success (0x00)
< HCI Command: Read Local Supported Fea.. (0x04|0x0003) plen 0 [hci0] 0.781774
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.785505
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0xff 0x05 0x00 0x18 0x18 0x00 0x00
3 slot packets
5 slot packets
Encryption
Slot offset
Timing accuracy
Role switch
Hold mode
Sniff mode
Park state
Power control requests
Channel quality driven data rate (CQDDR) SCO link
HV2 packets
HV3 packets
u-law log synchronous data
A-law log synchronous data
CVSD synchronous data
Power control
AFH capable slave
AFH classification slave
AFH capable master
AFH classification master
< HCI Command: Read Local Version Infor.. (0x04|0x0001) plen 0 [hci0] 0.785575
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.788286
     Read Local Version Information (0x04|0x0001) ncmd 1
       Status: Success (0x00)
       HCI version: 2 - 0x2006
       LMP version: 2 - 0x1806
       Manufacturer: AVM Berlin (31)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 [hci0] 0.788360
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 10 [hci0] 0.791218
     Read BD ADDR (0x04|0x0009) ncmd 1
       Status: Success (0x00)
       Address: 00:04:0E:8D:1C:CC (OUI 00-04-0E)
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0 [hci0] 0.791858
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 11 [hci0] 0.794638
Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 120 ACL max packet: 20
SCO MTU: 24 SCO max packet: 5
< HCI Command: Read Class of Device (0x03|0x0023) plen 0 [hci0] 0.794704
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 7 [hci0] 0.798330
     Read Class of Device (0x03|0x0023) ncmd 1
       Status: Success (0x00)
       Class: 0x000000
         Major class: Miscellaneous
         Minor class: 0x00
< HCI Command: Read Local Name (0x03|0x0014) plen 0 [hci0] 0.798394
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 252 [hci0] 0.836309
     Read Local Name (0x03|0x0014) ncmd 1
       Status: Success (0x00)
       Name:
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0 [hci0] 0.836479
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 6 [hci0] 0.839240
     Read Voice Setting (0x03|0x0025) ncmd 1
       Status: Success (0x00)
       Setting: 0x0060
< HCI Command: Set Event Filter (0x03|0x0005) plen 1 [hci0] 0.839409
       Type: 0x00
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.842197
     Set Event Filter (0x03|0x0005) ncmd 1
       Status: Success (0x00)
< HCI Command: Write Connection Accept... (0x03|0x0016) plen 2
[hci0] 0.842365
       Timeout: 20000.000 msec (0x7d00)
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.845015
     Write Connection Accept Timeout (0x03|0x0016) ncmd 1
       Status: Success (0x00)
< HCI Command: Read Page Scan Activity (0x03|0x001b) plen 0 [hci0] 0.845182
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 8 [hci0] 0.849023
     Read Page Scan Activity (0x03|0x001b) ncmd 1
       Status: Success (0x00)
       Interval: 1280.000 msec (0x0800)
       Window: 11.250 msec (0x0012)
< HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 [hci0] 0.849185
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 5 [hci0] 0.853008
     Read Page Scan Type (0x03|0x0046) ncmd 1
       Status: Success (0x00)
       Type: Standard Scan (0x00)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 0.853166
Mask: 0x00001807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete Synchronous Connection Complete
Synchronous Connection Changed
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.857379
     Set Event Mask (0x03|0x0001) ncmd 1
       Status: Success (0x00)
< HCI Command: Write Page Timeout (0x03|0x0018) plen 2 [hci0] 0.858038
       Timeout: 5120.000 msec (0x2000)
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.859862
     Write Page Timeout (0x03|0x0018) ncmd 1
       Status: Success (0x00)
< HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 [hci0] 0.859932
       Address: 00:00:00:00:00:00 (OUI 00-00-00)
       Read all: 0x01
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 8 [hci0] 0.863627
Read Stored Link Key (0x03|0x000d) ncmd 1
Status: Success (0x00)
Max num keys: 8
Num keys: 0
< HCI Command: Write Local Name (0x03|0x0013) plen 248 [hci0] 0.882030
Name: debian-capi-0
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.885847
     Write Local Name (0x03|0x0013) ncmd 1
       Status: Success (0x00)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 0.917369
Mask: 0x00001807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete Synchronous Connection Complete
Synchronous Connection Changed
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.924343
     Set Event Mask (0x03|0x0001) ncmd 1
       Status: Success (0x00)
< HCI Command: Write Default Link Polic.. (0x02|0x000f) plen 2
[hci0] 0.924523
       Link policy: 0x000f
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 0.928050
     Write Default Link Policy Settings (0x02|0x000f) ncmd 1
       Status: Unknown HCI Command (0x01)
< HCI Command: Write Class of Device (0x03|0x0024) plen 3 [hci0] 0.928289
Class: 0x6e0100
Major class: Computer (desktop, notebook, PDA, organizers) Minor class: Uncategorized, code for device not assigned Networking (LAN, Ad hoc)
Rendering (Printing, Speaker)
Capturing (Scanner, Microphone)
Audio (Speaker, Microphone, Headset)
Telephony (Cordless telephony, Modem, Headset)
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.931044
     Write Class of Device (0x03|0x0024) ncmd 1
       Status: Success (0x00)
< HCI Command: Write Scan Enable (0x03|0x001a) plen 1 [hci0] 0.931274
       Scan enable: Page Scan (0x02)
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.934042
     Write Scan Enable (0x03|0x001a) ncmd 1
       Status: Success (0x00)
< HCI Command: Read Local Name (0x03|0x0014) plen 0 [hci0] 0.934286 @ New Settings: 0x0093
powered connectable pairable br/edr
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 252 [hci0] 0.974894
     Read Local Name (0x03|0x0014) ncmd 1
       Status: Success (0x00)
       Name: debian-capi-0
< HCI Command: Read Scan Enable (0x03|0x0019) plen 0 [hci0] 0.975018
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 5 [hci0] 0.978549
     Read Scan Enable (0x03|0x0019) ncmd 1
       Status: Success (0x00)
       Scan enable: Page Scan (0x02)
< HCI Command: Inquiry (0x01|0x0001) plen 5 [hci0] 159.025599
       Access code: 0x9e8b33 (General Inquiry)
       Length: 10.24s (0x08)
       Num responses: 0
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 159.033290
     Inquiry (0x01|0x0001) ncmd 1
       Status: Success (0x00)
@ Discovering: 0x01 (0)
Quoted 1 line
HCI Event: Inquiry Result (0x02) plen 15 [hci0] 165.868687
       Num responses: 1
       Address: A0:E9:DB:00:B5:BB (OUI A0-E9-DB)
       Page scan repetition mode: R1 (0x01)
       Page period mode: P2 (0x02)
       Page scan mode: Mandatory (0x00)
       Class: 0x240404
         Major class: Audio/Video (headset, speaker, stereo, video, vcr)
         Minor class: 0x01
         Rendering (Printing, Speaker)
         Audio (Speaker, Microphone, Headset)
       Clock offset: 0x14a9
@ Device Found: A0:E9:DB:00:B5:BB (0) rssi 0 flags 0x0003
       04 0d 04 04 24                                   ....$
Quoted 1 line
HCI Event: Inquiry Complete (0x01) plen 1 [hci0] 169.281636
       Status: Success (0x00)
< HCI Command: Remote Name Request (0x01|0x0019) plen 10 [hci0] 169.282228
       Address: A0:E9:DB:00:B5:BB (OUI A0-E9-DB)
       Page scan repetition mode: R1 (0x01)
       Page scan mode: Mandatory (0x00)
       Clock offset: 0x94a9
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 169.288567
     Remote Name Request (0x01|0x0019) ncmd 1
       Status: Success (0x00)
Quoted 1 line
HCI Event: Remote Name Req Complete (0x07) plen 255 [hci0] 169.877365
       Status: Success (0x00)
       Address: A0:E9:DB:00:B5:BB (OUI A0-E9-DB)
       Name: RAIKKO BT Speaker

Quoted 8 lines

Quoted 6 lines
Playing Audio with
mplayer -ao alsa:device=btheadset 05N\ The\ Race\ -\ .mp3
Also works nicely. Let me know if I should test anything else.
Thx for this good and fast support.
Patch has been applied to bluetooth.git. Thanks everyone.

can you please explain to me why the important part of the btmon trace is not part of the commit message. I mentioned this before that patches that go in after the merge window closes especially are suppose to have as much information as possible and we should record as much information about the bug as possible.

If I ever want to figure out with what error code the BlueFritz! failed this command, I have to dig into the mailing list archive to hopefully find it. This is all silly. We can be plenty verbose in the commit messages. And you as maintainer need to enforce this.

Since Johan send this as a test patch, this is a bit premature to just apply it. You could have at least waited until he send a dedicated patch and me complaining that the btmon trace was missing in the commit message. I am so not happy about just applying this patch and sending out a pull request minutes later.

Regards

Marcel

Marcel Holtmann

maintainer

2013-07-25 14:40 UTC #11 lore raw

In reply to Jörg Esser

Hi Johan,

Quoted 239 lines

Quoted 33 lines
Quoted 27 lines
Quoted 20 lines
Quoted 20 lines
Quoted 20 lines
Quoted 6 lines
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.043811
     Read Local Version Information (0x04|0x0001) ncmd 1
       Status: Success (0x00)
       HCI version: 2 - 0x2006
       LMP version: 2 - 0x1806
       Manufacturer: AVM Berlin (31)
it declares itself here as Bluetooth 1.2 device. Which means it is the second generation of BlueFritz! USB device.
<snip>
Quoted 4 lines
< HCI Command: Read Local Supported Comm.. (0x04|0x0002) plen 0 [hci0] 0.210014
Quoted 1 line
HCI Event: Command Status (0x0f) plen 4 [hci0] 0.217361
     Read Local Supported Commands (0x04|0x0002) ncmd 1
       Status: Unknown HCI Command (0x01)
And here is your failing command. Newer kernels have been strict with failing commands and will just abort the setup if anything goes wrong.
Johan, we need to figure out on how to work around this one. Might just match for the manufacturer before sending the command.
Quoted 7 lines
Quoted 3 lines
Either that or a quirk based on the USB id. Wouldn't matching just the manufacturer be a bit problematic for any newer chips from this company, or they stopped doing Bluetooth dongles after this one?
They stopped doing Bluetooth dongles after this one. I found no more Product with bluetooth on their website.
The support from AVM endet on 01.12.2009.
As I read herehttp://www.wehavemorefun.de/fritzbox/BlueFRITZ!_USB
Quoted 6 lines
yes, they ever only made two products. And their baseband was based on Silicon Wave which actually got bought by Qualcomm if I remember this correctly. So going by the manufacturer id and adding a good comment into the code might make this work nicely again.
Johan, if you prefer a quirk, then go for that one.
Quoted 8 lines
Since we know that these are the only pieces of hardware that exist with this manufacturer id I think it's simplest to just use that instead of creating more code for this.
Attached is a patch that still needs to be tested. It might e.g. reveal other commands that also fail with this hardware.
Johan
After appling your patch I can use the adapter.
syslog says:
Jul 24 16:21:31 debian-capi kernel: [  153.864308] usb 1-3: new full-speed USB device number 4 using ohci_hcd
Jul 24 16:21:31 debian-capi kernel: [  154.120244] usb 1-3: New USB device found, idVendor=057c, idProduct=3800
Jul 24 16:21:31 debian-capi kernel: [  154.120251] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Jul 24 16:21:31 debian-capi kernel: [  154.120254] usb 1-3: Product: Bluetooth Device
Jul 24 16:21:31 debian-capi kernel: [  154.120257] usb 1-3: Manufacturer: Bluetooth Device
Jul 24 16:21:31 debian-capi kernel: [  154.120260] usb 1-3: SerialNumber: CC1C8D0E0400
Jul 24 16:21:31 debian-capi bluetoothd[2203]: HCI dev 0 registered
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Listening for HCI events on hci0
Jul 24 16:21:31 debian-capi kernel: [  154.149949] usbcore: registered new interface driver btusb
Jul 24 16:21:31 debian-capi bluetoothd[2203]: HCI dev 0 up
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Proximity GATT Reporter Driver: Operation not permitted (1)
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Unable to load keys to adapter_ops: Function not implemented (38)
Jul 24 16:21:31 debian-capi bluetoothd[2203]: Adapter /org/bluez/2203/hci0 has been enabled
after scanning with hcitool scan, it finds my BT Speaker btmon says:
btmon
Bluetooth monitor ver 5.7
= New Index: 00:00:00:00:00:00 (BR/EDR,USB,hci0) [hci0] 0.767719 < HCI Command: Reset (0x03|0x0003) plen 0 [hci0] 0.773725
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.781039
     Reset (0x03|0x0003) ncmd 1
       Status: Success (0x00)
< HCI Command: Read Local Supported Fea.. (0x04|0x0003) plen 0 [hci0] 0.781774
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.785505
Read Local Supported Features (0x04|0x0003) ncmd 1
Status: Success (0x00)
Features: 0xff 0xff 0x05 0x00 0x18 0x18 0x00 0x00
3 slot packets
5 slot packets
Encryption
Slot offset
Timing accuracy
Role switch
Hold mode
Sniff mode
Park state
Power control requests
Channel quality driven data rate (CQDDR)
SCO link
HV2 packets
HV3 packets
u-law log synchronous data
A-law log synchronous data
CVSD synchronous data
Power control
AFH capable slave
AFH classification slave
AFH capable master
AFH classification master
< HCI Command: Read Local Version Infor.. (0x04|0x0001) plen 0 [hci0] 0.785575
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 12 [hci0] 0.788286
     Read Local Version Information (0x04|0x0001) ncmd 1
       Status: Success (0x00)
       HCI version: 2 - 0x2006
       LMP version: 2 - 0x1806
       Manufacturer: AVM Berlin (31)
< HCI Command: Read BD ADDR (0x04|0x0009) plen 0 [hci0] 0.788360
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 10 [hci0] 0.791218
     Read BD ADDR (0x04|0x0009) ncmd 1
       Status: Success (0x00)
       Address: 00:04:0E:8D:1C:CC (OUI 00-04-0E)
< HCI Command: Read Buffer Size (0x04|0x0005) plen 0 [hci0] 0.791858
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 11 [hci0] 0.794638
Read Buffer Size (0x04|0x0005) ncmd 1
Status: Success (0x00)
ACL MTU: 120 ACL max packet: 20
SCO MTU: 24 SCO max packet: 5
< HCI Command: Read Class of Device (0x03|0x0023) plen 0 [hci0] 0.794704
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 7 [hci0] 0.798330
     Read Class of Device (0x03|0x0023) ncmd 1
       Status: Success (0x00)
       Class: 0x000000
         Major class: Miscellaneous
         Minor class: 0x00
< HCI Command: Read Local Name (0x03|0x0014) plen 0 [hci0] 0.798394
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 252 [hci0] 0.836309
     Read Local Name (0x03|0x0014) ncmd 1
       Status: Success (0x00)
       Name:
< HCI Command: Read Voice Setting (0x03|0x0025) plen 0 [hci0] 0.836479
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 6 [hci0] 0.839240
     Read Voice Setting (0x03|0x0025) ncmd 1
       Status: Success (0x00)
       Setting: 0x0060
< HCI Command: Set Event Filter (0x03|0x0005) plen 1 [hci0] 0.839409
       Type: 0x00
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.842197
     Set Event Filter (0x03|0x0005) ncmd 1
       Status: Success (0x00)
< HCI Command: Write Connection Accept... (0x03|0x0016) plen 2 [hci0] 0.842365
       Timeout: 20000.000 msec (0x7d00)
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.845015
     Write Connection Accept Timeout (0x03|0x0016) ncmd 1
       Status: Success (0x00)
< HCI Command: Read Page Scan Activity (0x03|0x001b) plen 0 [hci0] 0.845182
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 8 [hci0] 0.849023
     Read Page Scan Activity (0x03|0x001b) ncmd 1
       Status: Success (0x00)
       Interval: 1280.000 msec (0x0800)
       Window: 11.250 msec (0x0012)
< HCI Command: Read Page Scan Type (0x03|0x0046) plen 0 [hci0] 0.849185
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 5 [hci0] 0.853008
     Read Page Scan Type (0x03|0x0046) ncmd 1
       Status: Success (0x00)
       Type: Standard Scan (0x00)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 0.853166
Mask: 0x00001807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed
QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete Synchronous Connection Complete
Synchronous Connection Changed
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.857379
     Set Event Mask (0x03|0x0001) ncmd 1
       Status: Success (0x00)
< HCI Command: Write Page Timeout (0x03|0x0018) plen 2 [hci0] 0.858038
       Timeout: 5120.000 msec (0x2000)
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.859862
     Write Page Timeout (0x03|0x0018) ncmd 1
       Status: Success (0x00)
< HCI Command: Read Stored Link Key (0x03|0x000d) plen 7 [hci0] 0.859932
       Address: 00:00:00:00:00:00 (OUI 00-00-00)
       Read all: 0x01
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 8 [hci0] 0.863627
Read Stored Link Key (0x03|0x000d) ncmd 1
Status: Success (0x00)
Max num keys: 8
Num keys: 0
< HCI Command: Write Local Name (0x03|0x0013) plen 248 [hci0] 0.882030
Name: debian-capi-0
Quoted 1 line
HCI Event: Command Complete (0x0e) plen 4 [hci0] 0.885847
     Write Local Name (0x03|0x0013) ncmd 1
       Status: Success (0x00)
< HCI Command: Set Event Mask (0x03|0x0001) plen 8 [hci0] 0.917369
Mask: 0x00001807fffbffff
Inquiry Complete
Inquiry Result
Connection Complete
Connection Request
Disconnection Complete
Authentication Complete
Remote Name Request Complete
Encryption Change
Change Connection Link Key Complete
Master Link Key Complete
Read Remote Supported Features Complete
Read Remote Version Information Complete
QoS Setup Complete
Command Complete
Command Status
Hardware Error
Flush Occurred
Role Change
Mode Change
Return Link Keys
PIN Code Request
Link Key Request
Link Key Notification
Loopback Command
Data Buffer Overflow
Max Slots Change
Read Clock Offset Complete
Connection Packet Type Changed

Quoted 8 lines

QoS Violation
Page Scan Mode Change
Page Scan Repetition Mode Change
Flow Specification Complete
Inquiry Result with RSSI
Read Remote Extended Features Complete
Synchronous Connection Complete
Synchronous Connection Changed

any idea why we are sending Set Event Mask twice.

Regards

Marcel