Renesas ARM based clocksource updates for v3.12

From: Magnus Damm <[email protected]>

Add support for CMT hardware with 32-bit control and counter registers, as found on r8a73a4 and r8a7790. To use the CMT with 32-bit hardware a second I/O memory resource needs to point out the CMSTR register and it needs to be 32 bit wide.

Signed-off-by Magnus Damm <[email protected]>

Signed-off-by Simon Horman <[email protected]>

---

 drivers/clocksource/sh_cmt.c |   50 ++++++++++++++++++++++++++++++------------
 1 file changed, 36 insertions(+), 14 deletions(-)

drivers/clocksource/sh_cmt.c +36 -14

index 08d0c41..0965e98 100644
@@ -37,6 +37,7 @@
 
 struct sh_cmt_priv {
 	void __iomem *mapbase;
+	void __iomem *mapbase_str;
 	struct clk *clk;
 	unsigned long width; /* 16 or 32 bit version of hardware block */
 	unsigned long overflow_bit;

@@ -79,6 +80,12 @@ struct sh_cmt_priv {
  * CMCSR 0xffca0060 16-bit
  * CMCNT 0xffca0064 32-bit
  * CMCOR 0xffca0068 32-bit
+ *
+ * "32-bit counter and 32-bit control" as found on r8a73a4 and r8a7790:
+ * CMSTR 0xffca0500 32-bit
+ * CMCSR 0xffca0510 32-bit
+ * CMCNT 0xffca0514 32-bit
+ * CMCOR 0xffca0518 32-bit
  */
 
 static unsigned long sh_cmt_read16(void __iomem *base, unsigned long offs)

@@ -109,9 +116,7 @@ static void sh_cmt_write32(void __iomem *base, unsigned long offs,
 
 static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_priv *p)
 {
-	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
-
-	return p->read_control(p->mapbase - cfg->channel_offset, 0);
+	return p->read_control(p->mapbase_str, 0);
 }
 
 static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_priv *p)

@@ -127,9 +132,7 @@ static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_priv *p)
 static inline void sh_cmt_write_cmstr(struct sh_cmt_priv *p,
 				      unsigned long value)
 {
-	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
-
-	p->write_control(p->mapbase - cfg->channel_offset, 0, value);
+	p->write_control(p->mapbase_str, 0, value);
 }
 
 static inline void sh_cmt_write_cmcsr(struct sh_cmt_priv *p,

@@ -676,7 +679,7 @@ static int sh_cmt_register(struct sh_cmt_priv *p, char *name,
 static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 {
 	struct sh_timer_config *cfg = pdev->dev.platform_data;
-	struct resource *res;
+	struct resource *res, *res2;
 	int irq, ret;
 	ret = -ENXIO;
 

@@ -694,6 +697,9 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 		goto err0;
 	}
 
+	/* optional resource for the shared timer start/stop register */
+	res2 = platform_get_resource(p->pdev, IORESOURCE_MEM, 1);
+
 	irq = platform_get_irq(p->pdev, 0);
 	if (irq < 0) {
 		dev_err(&p->pdev->dev, "failed to get irq\n");

@@ -707,6 +713,15 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 		goto err0;
 	}
 
+	/* map second resource for CMSTR */
+	p->mapbase_str = ioremap_nocache(res2 ? res2->start :
+					 res->start - cfg->channel_offset,
+					 res2 ? resource_size(res2) : 2);
+	if (p->mapbase_str == NULL) {
+		dev_err(&p->pdev->dev, "failed to remap I/O second memory\n");
+		goto err1;
+	}
+
 	/* request irq using setup_irq() (too early for request_irq()) */
 	p->irqaction.name = dev_name(&p->pdev->dev);
 	p->irqaction.handler = sh_cmt_interrupt;

@@ -719,11 +734,17 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 	if (IS_ERR(p->clk)) {
 		dev_err(&p->pdev->dev, "cannot get clock\n");
 		ret = PTR_ERR(p->clk);
-		goto err1;
+		goto err2;
 	}
 
-	p->read_control = sh_cmt_read16;
-	p->write_control = sh_cmt_write16;
+	if (res2 && (resource_size(res2) == 4)) {
+		/* assume both CMSTR and CMCSR to be 32-bit */
+		p->read_control = sh_cmt_read32;
+		p->write_control = sh_cmt_write32;
+	} else {
+		p->read_control = sh_cmt_read16;
+		p->write_control = sh_cmt_write16;
+	}
 
 	if (resource_size(res) == 6) {
 		p->width = 16;

@@ -752,22 +773,23 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 			      cfg->clocksource_rating);
 	if (ret) {
 		dev_err(&p->pdev->dev, "registration failed\n");
-		goto err2;
+		goto err3;
 	}
 	p->cs_enabled = false;
 
 	ret = setup_irq(irq, &p->irqaction);
 	if (ret) {
 		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
-		goto err2;
+		goto err3;
 	}
 
 	platform_set_drvdata(pdev, p);
 
 	return 0;
-err2:
+err3:
 	clk_put(p->clk);
-
+err2:
+	iounmap(p->mapbase_str);
 err1:
 	iounmap(p->mapbase);
 err0:

Quoted 7 lines · Simon Horman

From: Magnus Damm <[email protected]>

Add support for CMT hardware with 32-bit control and counter registers, as found on r8a73a4 and r8a7790. To use the CMT with 32-bit hardware a second I/O memory resource needs to point out the CMSTR register and it needs to be 32 bit wide.

Quoted 3 lines

Signed-off-by Magnus Damm <[email protected]>

Signed-off-by Simon Horman <[email protected]>

---

In the future, can you Cc drivers/clocksource maintainers please ?

Reviewed-by Daniel Lezcano <[email protected]>

Quoted 136 lines

 drivers/clocksource/sh_cmt.c |   50 ++++++++++++++++++++++++++++++------------
 1 file changed, 36 insertions(+), 14 deletions(-)

drivers/clocksource/sh_cmt.c +36 -14

index 08d0c41..0965e98 100644
@@ -37,6 +37,7 @@
 
 struct sh_cmt_priv {
 	void __iomem *mapbase;
+	void __iomem *mapbase_str;
 	struct clk *clk;
 	unsigned long width; /* 16 or 32 bit version of hardware block */
 	unsigned long overflow_bit;

@@ -79,6 +80,12 @@ struct sh_cmt_priv {
  * CMCSR 0xffca0060 16-bit
  * CMCNT 0xffca0064 32-bit
  * CMCOR 0xffca0068 32-bit
+ *
+ * "32-bit counter and 32-bit control" as found on r8a73a4 and r8a7790:
+ * CMSTR 0xffca0500 32-bit
+ * CMCSR 0xffca0510 32-bit
+ * CMCNT 0xffca0514 32-bit
+ * CMCOR 0xffca0518 32-bit
  */
 
 static unsigned long sh_cmt_read16(void __iomem *base, unsigned long offs)

@@ -109,9 +116,7 @@ static void sh_cmt_write32(void __iomem *base, unsigned long offs,
 
 static inline unsigned long sh_cmt_read_cmstr(struct sh_cmt_priv *p)
 {
-	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
-
-	return p->read_control(p->mapbase - cfg->channel_offset, 0);
+	return p->read_control(p->mapbase_str, 0);
 }
 
 static inline unsigned long sh_cmt_read_cmcsr(struct sh_cmt_priv *p)

@@ -127,9 +132,7 @@ static inline unsigned long sh_cmt_read_cmcnt(struct sh_cmt_priv *p)
 static inline void sh_cmt_write_cmstr(struct sh_cmt_priv *p,
 				      unsigned long value)
 {
-	struct sh_timer_config *cfg = p->pdev->dev.platform_data;
-
-	p->write_control(p->mapbase - cfg->channel_offset, 0, value);
+	p->write_control(p->mapbase_str, 0, value);
 }
 
 static inline void sh_cmt_write_cmcsr(struct sh_cmt_priv *p,

@@ -676,7 +679,7 @@ static int sh_cmt_register(struct sh_cmt_priv *p, char *name,
 static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 {
 	struct sh_timer_config *cfg = pdev->dev.platform_data;
-	struct resource *res;
+	struct resource *res, *res2;
 	int irq, ret;
 	ret = -ENXIO;
 

@@ -694,6 +697,9 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 		goto err0;
 	}
 
+	/* optional resource for the shared timer start/stop register */
+	res2 = platform_get_resource(p->pdev, IORESOURCE_MEM, 1);
+
 	irq = platform_get_irq(p->pdev, 0);
 	if (irq < 0) {
 		dev_err(&p->pdev->dev, "failed to get irq\n");

@@ -707,6 +713,15 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 		goto err0;
 	}
 
+	/* map second resource for CMSTR */
+	p->mapbase_str = ioremap_nocache(res2 ? res2->start :
+					 res->start - cfg->channel_offset,
+					 res2 ? resource_size(res2) : 2);
+	if (p->mapbase_str == NULL) {
+		dev_err(&p->pdev->dev, "failed to remap I/O second memory\n");
+		goto err1;
+	}
+
 	/* request irq using setup_irq() (too early for request_irq()) */
 	p->irqaction.name = dev_name(&p->pdev->dev);
 	p->irqaction.handler = sh_cmt_interrupt;

@@ -719,11 +734,17 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 	if (IS_ERR(p->clk)) {
 		dev_err(&p->pdev->dev, "cannot get clock\n");
 		ret = PTR_ERR(p->clk);
-		goto err1;
+		goto err2;
 	}
 
-	p->read_control = sh_cmt_read16;
-	p->write_control = sh_cmt_write16;
+	if (res2 && (resource_size(res2) == 4)) {
+		/* assume both CMSTR and CMCSR to be 32-bit */
+		p->read_control = sh_cmt_read32;
+		p->write_control = sh_cmt_write32;
+	} else {
+		p->read_control = sh_cmt_read16;
+		p->write_control = sh_cmt_write16;
+	}
 
 	if (resource_size(res) == 6) {
 		p->width = 16;

@@ -752,22 +773,23 @@ static int sh_cmt_setup(struct sh_cmt_priv *p, struct platform_device *pdev)
 			      cfg->clocksource_rating);
 	if (ret) {
 		dev_err(&p->pdev->dev, "registration failed\n");
-		goto err2;
+		goto err3;
 	}
 	p->cs_enabled = false;
 
 	ret = setup_irq(irq, &p->irqaction);
 	if (ret) {
 		dev_err(&p->pdev->dev, "failed to request irq %d\n", irq);
-		goto err2;
+		goto err3;
 	}
 
 	platform_set_drvdata(pdev, p);
 
 	return 0;
-err2:
+err3:
 	clk_put(p->clk);
-
+err2:
+	iounmap(p->mapbase_str);
 err1:
 	iounmap(p->mapbase);
 err0:

Signature · 10 lines

 <http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

--
To unsubscribe from this list: send the line "unsubscribe linux-sh" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Quoted 12 lines · Daniel Lezcano

Quoted 10 lines · Simon Horman

From: Magnus Damm <[email protected]>

Add support for CMT hardware with 32-bit control and counter registers, as found on r8a73a4 and r8a7790. To use the CMT with 32-bit hardware a second I/O memory resource needs to point out the CMSTR register and it needs to be 32 bit wide.

Signed-off-by Magnus Damm <[email protected]>

Signed-off-by Simon Horman <[email protected]>

---

Quoted 1 line

In the future, can you Cc drivers/clocksource maintainers please ?

Yes of course, sorry for that oversight.

Quoted 1 line

Reviewed-by Daniel Lezcano <[email protected]>

Olof, Arnd, please let me know if you wish me to re-send the pull request with Daniel's Reviewed-by added to this patch.

Quoted 17 lines · Simon Horman

Quoted 8 lines · Daniel Lezcano

Quoted 7 lines · Simon Horman

From: Magnus Damm <[email protected]>

Add support for CMT hardware with 32-bit control and counter registers, as found on r8a73a4 and r8a7790. To use the CMT with 32-bit hardware a second I/O memory resource needs to point out the CMSTR register and it needs to be 32 bit wide.

Quoted 5 lines

Quoted 3 lines

Signed-off-by Magnus Damm <[email protected]>

Signed-off-by Simon Horman <[email protected]>

---

In the future, can you Cc drivers/clocksource maintainers please ?

Yes of course, sorry for that oversight.

Quoted 4 lines

Quoted 1 line

Reviewed-by Daniel Lezcano <[email protected]>

Olof, Arnd, please let me know if you wish me to re-send the pull request with Daniel's Reviewed-by added to this patch.

This patch should just go in through Daniel, there's no reason to take it through arm-soc at all, unless you have platform code that relies on it for bisectability.