Skip to contentSkip to conversation

imx: Add documentation for imx specific commands

PATCH New Robert Winkler 3 participants 3 messages Jul 25, 2013 – Jul 27, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 imx: Add documentation for imx specific commands

CONFIG_CMD_HDMIDETECT
CONFIG_CMD_BMODE

---
changes from v1:
removed space between MX and series # to be
consistent with U-Boot

 README | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
README +15 -0
index bcfffc3..3a7cf4e 100644
@@ -2598,6 +2598,21 @@ CBFS (Coreboot Filesystem) support
 		Note: There is also a sha1sum command, which should perhaps
 		be deprecated in favour of 'hash sha1'.
 
+- Freescale i.MX specific commands:
+		CONFIG_CMD_HDMIDETECT
+		This enables 'hdmidet' command which returns true if an
+		HDMI monitor is detected.  This command is i.MX 6 specific.
+
+		CONFIG_CMD_BMODE
+		This enables the 'bmode' (bootmode) command for forcing
+		a boot from specific media.
+
+		This is useful for forcing the ROM's usb downloader to
+		activate upon a watchdog reset which is nice when iterating
+		on U-Boot.  Using the reset button or running bmode normal
+		will set it back to normal.  This command currently
+		supports i.MX53 and i.MX6.
+
 - Signing support:
 		CONFIG_RSA
 
Signature · 1 line
1.8.3.4
#2 lore raw

PATCH 1/1 imx: Add documentation for imx specific commands

In reply to Robert Winkler
Quoted 5 lines · Robert Winkler

CONFIG_CMD_HDMIDETECT
CONFIG_CMD_BMODE

---

Applied to u-boot-imx, thanks.

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================