Skip to contentSkip to conversation

documentations: treewide: Fix typo in Documentations/filesystems

PATCH In review Masanari Iida 2 participants 2 messages Aug 19, 2013

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 documentations: treewide: Fix typo in Documentations/filesystems

Correct spelling typo in Documentations/filesystems.

---
 Documentation/filesystems/btrfs.txt     | 2 +-
 Documentation/filesystems/f2fs.txt      | 2 +-
 Documentation/filesystems/nfs/Exporting | 2 +-
 Documentation/filesystems/qnx6.txt      | 2 +-
 Documentation/filesystems/xfs.txt       | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)
Documentation/filesystems/btrfs.txt +1 -1
index b349d57..9dae594 100644
@@ -87,7 +87,7 @@ Unless otherwise specified, all options default to off.
 
   device=<devicepath>
 	Specify a device during mount so that ioctls on the control device
-	can be avoided.  Especialy useful when trying to mount a multi-device
+	can be avoided.  Especially useful when trying to mount a multi-device
 	setup as root.  May be specified multiple times for multiple devices.
 
   discard
Documentation/filesystems/f2fs.txt +1 -1
index 3cd27be..3b57456 100644
@@ -216,7 +216,7 @@ The dump.f2fs shows the information of specific inode and dumps SSA and SIT to
 file. Each file is dump_ssa and dump_sit.
 
 The dump.f2fs is used to debug on-disk data structures of the f2fs filesystem.
-It shows on-disk inode information reconized by a given inode number, and is
+It shows on-disk inode information recognized by a given inode number, and is
 able to dump all the SSA and SIT entries into predefined files, ./dump_ssa and
 ./dump_sit respectively.
 
Documentation/filesystems/nfs/Exporting +1 -1
index 09994c2..e543b1a 100644
@@ -93,7 +93,7 @@ For a filesystem to be exportable it must:
    2/ make sure that d_splice_alias is used rather than d_add
       when ->lookup finds an inode for a given parent and name.
 
-      If inode is NULL, d_splice_alias(inode, dentry) is eqivalent to
+      If inode is NULL, d_splice_alias(inode, dentry) is equivalent to
 
 		d_add(dentry, inode), NULL
 
Documentation/filesystems/qnx6.txt +1 -1
index 99e9018..4086797 100644
@@ -149,7 +149,7 @@ Bitmap system area
 ------------------
 
 The bitmap itself is divided into three parts.
-First the system area, that is split into two halfs.
+First the system area, that is split into two halves.
 Then userspace.
 
 The requirement for a static, fixed preallocated system area comes from how
Documentation/filesystems/xfs.txt +1 -1
index 12525b1..5be51fd 100644
@@ -135,7 +135,7 @@ default behaviour.
 	If the memory cost of 8 log buffers is too high on small
 	systems, then it may be reduced at some cost to performance
 	on metadata intensive workloads. The logbsize option below
-	controls the size of each buffer and so is also relevent to
+	controls the size of each buffer and so is also relevant to
 	this case.
 
   logbsize=value
Signature · 1 line
1.8.4.rc3.2.g2c2b664
reviewer Acked-by on v1 1/1
#1 lore raw
Quoted 3 lines · Masanari Iida

Correct spelling typo in Documentations/filesystems.

This probably can also go via [email protected].

Thanks.

Quoted 75 lines
---
 Documentation/filesystems/btrfs.txt     | 2 +-
 Documentation/filesystems/f2fs.txt      | 2 +-
 Documentation/filesystems/nfs/Exporting | 2 +-
 Documentation/filesystems/qnx6.txt      | 2 +-
 Documentation/filesystems/xfs.txt       | 2 +-
 5 files changed, 5 insertions(+), 5 deletions(-)
Documentation/filesystems/btrfs.txt +1 -1
index b349d57..9dae594 100644
@@ -87,7 +87,7 @@ Unless otherwise specified, all options default to off.
 
   device=<devicepath>
 	Specify a device during mount so that ioctls on the control device
-	can be avoided.  Especialy useful when trying to mount a multi-device
+	can be avoided.  Especially useful when trying to mount a multi-device
 	setup as root.  May be specified multiple times for multiple devices.
 
   discard
Documentation/filesystems/f2fs.txt +1 -1
index 3cd27be..3b57456 100644
@@ -216,7 +216,7 @@ The dump.f2fs shows the information of specific inode and dumps SSA and SIT to
 file. Each file is dump_ssa and dump_sit.
 
 The dump.f2fs is used to debug on-disk data structures of the f2fs filesystem.
-It shows on-disk inode information reconized by a given inode number, and is
+It shows on-disk inode information recognized by a given inode number, and is
 able to dump all the SSA and SIT entries into predefined files, ./dump_ssa and
 ./dump_sit respectively.
 
Documentation/filesystems/nfs/Exporting +1 -1
index 09994c2..e543b1a 100644
@@ -93,7 +93,7 @@ For a filesystem to be exportable it must:
    2/ make sure that d_splice_alias is used rather than d_add
       when ->lookup finds an inode for a given parent and name.
 
-      If inode is NULL, d_splice_alias(inode, dentry) is eqivalent to
+      If inode is NULL, d_splice_alias(inode, dentry) is equivalent to
 
 		d_add(dentry, inode), NULL
 
Documentation/filesystems/qnx6.txt +1 -1
index 99e9018..4086797 100644
@@ -149,7 +149,7 @@ Bitmap system area
 ------------------
 
 The bitmap itself is divided into three parts.
-First the system area, that is split into two halfs.
+First the system area, that is split into two halves.
 Then userspace.
 
 The requirement for a static, fixed preallocated system area comes from how
Documentation/filesystems/xfs.txt +1 -1
index 12525b1..5be51fd 100644
@@ -135,7 +135,7 @@ default behaviour.
 	If the memory cost of 8 log buffers is too high on small
 	systems, then it may be reduced at some cost to performance
 	on metadata intensive workloads. The logbsize option below
-	controls the size of each buffer and so is also relevent to
+	controls the size of each buffer and so is also relevant to
 	this case.
 
   logbsize=value
Signature · 1 line
~Randy