powerpc/p1010rdb: remove CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
PATCH 1/1 powerpc/p1010rdb: remove CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK was needed only on obsolete P1010RDB Rev.B non-formal board, not reproduced on P1010RDB Rev.C and new P1010RDB-PB, now it's no longer needed.
--- arch/powerpc/include/asm/config_mpc85xx.h | 1 - 1 file changed, 1 deletion(-)
arch/powerpc/include/asm/config_mpc85xx.h +0 -1
@@ -139,7 +139,6 @@#define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 -#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK #define CONFIG_NUM_DDR_CONTROLLERS 1#define CONFIG_SYS_FSL_NUM_USB_CTRLS 1#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
Signature · 1 line
1.8.0
PATCH 1/1 powerpc/p1010rdb: remove CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
Quoted 15 lines · Shengzhou Liu
CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLKwas needed only on obsolete P1010RDB Rev.B non-formal board, not reproduced on P1010RDB Rev.C and new P1010RDB-PB, now it's no longer needed.Signed-off-by Shengzhou Liu <[email protected]>--- arch/powerpc/include/asm/config_mpc85xx.h | 1 - 1 file changed, 1 deletion(-)arch/powerpc/include/asm/config_mpc85xx.h +0
-0
arch/powerpc/include/asm/config_mpc85xx.h line 144
Quoted 7 lines
arch/powerpc/include/asm/config_mpc85xx.h +0
-1@@ -139,7 +139,6 @@#define CONFIG_TSECV2 #define CONFIG_SYS_FSL_SEC_COMPAT 4#define CONFIG_SYS_FSL_ERRATUM_ESDHC111 -#define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK #define CONFIG_NUM_DDR_CONTROLLERS 1#define CONFIG_SYS_FSL_NUM_USB_CTRLS 1#define CONFIG_SYS_FSL_IFC_BANK_COUNT 4
Shengzhou,
Please check your patch and rebase to latest master if necessary. I cannot find CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK for P1010RDB. It does show up for BSC9132 but I doubt that is what you are trying to remove.
York
PATCH 1/1 powerpc/p1010rdb: remove CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK
It seems there is no CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK in the latest master. I intended to do that for P1010RDB rather than BSC9132, so just drop the patch. Thanks.
Quoted 15 lines
-----Original Message-----
From: sun york-R58495
Sent: Tuesday, August 20, 2013 7:38 AM
To: Liu Shengzhou-B36685
Cc: u-boot at lists.denx.de
Subject: Re: [U-Boot] [PATCH] powerpc/p1010rdb: removeCONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLKShengzhou,
Please check your patch and rebase to latest master if necessary. I cannot find
CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLKfor P1010RDB. It does show up for BSC9132 but I doubt that is what you are trying to remove.York