powerpc: Fix CamelCase checkpatch warnings

PATCH New Prabhakar Kushwaha 2 participants 2 messages Aug 16, 2013 – Aug 20, 2013

Subsystems (2)

PowerPC SPI

lore

Share & tools

lore

Prabhakar Kushwaha

author

2013-08-16 09:22 UTC #0 lore raw

PATCH v2 1/1 powerpc: Fix CamelCase checkpatch warnings

85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase".

Convert variables name to normal naming convention and modify board, driver files with updated the new structure.

Signed-off-by Prabhakar Kushwaha <[email protected]>

---
Chages for v2: Incorporated Thomas's comments
- Take care of git bisectable

 arch/powerpc/cpu/mpc85xx/cpu.c          |   43 +++++-----
 arch/powerpc/cpu/mpc85xx/fdt.c          |   10 +--
 arch/powerpc/cpu/mpc85xx/speed.c        |  142 +++++++++++++++----------------
 arch/powerpc/cpu/mpc86xx/cpu.c          |   16 ++--
 arch/powerpc/cpu/mpc86xx/speed.c        |   40 ++++-----
 board/freescale/mpc8540ads/mpc8540ads.c |    2 +-
 board/freescale/mpc8541cds/mpc8541cds.c |    2 +-
 board/freescale/mpc8555cds/mpc8555cds.c |    2 +-
 board/freescale/mpc8560ads/mpc8560ads.c |    2 +-
 board/freescale/p1_p2_rdb_pc/ddr.c      |    2 +-
 board/freescale/p1_twr/ddr.c            |    2 +-
 board/sbc8548/sbc8548.c                 |    4 +-
 board/socrates/socrates.c               |    2 +-
 board/xes/xpedite537x/ddr.c             |    2 +-
 drivers/spi/fsl_espi.c                  |    2 +-
 include/e500.h                          |   16 ++--
 include/mpc86xx.h                       |    6 +-
 17 files changed, 149 insertions(+), 146 deletions(-)

arch/powerpc/cpu/mpc85xx/cpu.c +22 ~~-21~~

index 66bc6a2..b77964a 100644
@@ -135,78 +135,79 @@ int checkcpu (void)
 		if (!(i & 3))
 			printf ("\n       ");
 		printf("CPU%d:%-4s MHz, ", core,
-			strmhz(buf1, sysinfo.freqProcessor[core]));
+			strmhz(buf1, sysinfo.freq_processor[core]));
 	}
-	printf("\n       CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
+	printf("\n       CCB:%-4s MHz,", strmhz(buf1, sysinfo.freq_systembus));
+	printf("\n");
 
 #ifdef CONFIG_FSL_CORENET
 	if (ddr_sync == 1) {
 		printf("       DDR:%-4s MHz (%s MT/s data rate) "
 			"(Synchronous), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 	} else {
 		printf("       DDR:%-4s MHz (%s MT/s data rate) "
 			"(Asynchronous), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 	}
 #else
 	switch (ddr_ratio) {
 	case 0x0:
 		printf("       DDR:%-4s MHz (%s MT/s data rate), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 		break;
 	case 0x7:
 		printf("       DDR:%-4s MHz (%s MT/s data rate) "
 			"(Synchronous), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 		break;
 	default:
 		printf("       DDR:%-4s MHz (%s MT/s data rate) "
 			"(Asynchronous), ",
-			strmhz(buf1, sysinfo.freqDDRBus/2),
-			strmhz(buf2, sysinfo.freqDDRBus));
+			strmhz(buf1, sysinfo.freq_ddrbus/2),
+			strmhz(buf2, sysinfo.freq_ddrbus));
 		break;
 	}
 #endif
 
 #if defined(CONFIG_FSL_LBC)
-	if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
-		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+	if (sysinfo.freq_localbus > LCRR_CLKDIV) {
+		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
 	} else {
 		printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
-		       sysinfo.freqLocalBus);
+		       sysinfo.freq_localbus);
 	}
 #endif
 
 #if defined(CONFIG_FSL_IFC)
-	printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+	printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
 #endif
 
 #ifdef CONFIG_CPM2
-	printf("CPM:   %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
+	printf("CPM:   %s MHz\n", strmhz(buf1, sysinfo.freq_systembus));
 #endif
 
 #ifdef CONFIG_QE
-	printf("       QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE));
+	printf("       QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe));
 #endif
 
 #ifdef CONFIG_SYS_DPAA_FMAN
 	for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
 		printf("       FMAN%d: %s MHz\n", i + 1,
-			strmhz(buf1, sysinfo.freqFMan[i]));
+			strmhz(buf1, sysinfo.freq_fman[i]));
 	}
 #endif
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
-	printf("       QMAN:  %s MHz\n", strmhz(buf1, sysinfo.freqQMAN));
+	printf("       QMAN:  %s MHz\n", strmhz(buf1, sysinfo.freq_qman));
 #endif
 
 #ifdef CONFIG_SYS_DPAA_PME
-	printf("       PME:   %s MHz\n", strmhz(buf1, sysinfo.freqPME));
+	printf("       PME:   %s MHz\n", strmhz(buf1, sysinfo.freq_pme));
 #endif
 
 	puts("L1:    D-cache 32 kB enabled\n       I-cache 32 kB enabled\n");

arch/powerpc/cpu/mpc85xx/fdt.c +5 -5

index 84bb8fa..63a04f1 100644
@@ -403,22 +403,22 @@ static void ft_fixup_dpaa_clks(void *blob)
 	get_sys_info(&sysinfo);
 #ifdef CONFIG_SYS_DPAA_FMAN
 	ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM1_OFFSET,
-			sysinfo.freqFMan[0]);
+			sysinfo.freq_fman[0]);
 
 #if (CONFIG_SYS_NUM_FMAN == 2)
 	ft_fixup_clks(blob, "fsl,fman", CONFIG_SYS_FSL_FM2_OFFSET,
-			sysinfo.freqFMan[1]);
+			sysinfo.freq_fman[1]);
 #endif
 #endif
 
 #ifdef CONFIG_SYS_DPAA_QBMAN
 	do_fixup_by_compat_u32(blob, "fsl,qman",
-			"clock-frequency", sysinfo.freqQMAN, 1);
+			"clock-frequency", sysinfo.freq_qman, 1);
 #endif
 
 #ifdef CONFIG_SYS_DPAA_PME
 	do_fixup_by_compat_u32(blob, "fsl,pme",
-		"clock-frequency", sysinfo.freqPME, 1);
+		"clock-frequency", sysinfo.freq_pme, 1);
 #endif
 }
 #else

@@ -616,7 +616,7 @@ void ft_cpu_setup(void *blob, bd_t *bd)
 	off = fdt_node_offset_by_prop_value(blob, -1, "device_type", "cpu", 4);
 	while (off != -FDT_ERR_NOTFOUND) {
 		u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
-		val = cpu_to_fdt32(sysinfo.freqProcessor[*reg]);
+		val = cpu_to_fdt32(sysinfo.freq_processor[*reg]);
 		fdt_setprop(blob, off, "clock-frequency", &val, 4);
 		off = fdt_node_offset_by_prop_value(blob, off, "device_type",
 							"cpu", 4);

arch/powerpc/cpu/mpc85xx/speed.c +71 ~~-71~~

365 lines not on this page · raw message

arch/powerpc/cpu/mpc86xx/cpu.c +8 -8

index d6b28dd..ab3250b 100644
@@ -72,17 +72,17 @@ checkcpu(void)
 	get_sys_info(&sysinfo);
 
 	puts("Clock Configuration:\n");
-	printf("       CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freqProcessor));
-	printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
+	printf("       CPU:%-4s MHz, ", strmhz(buf1, sysinfo.freq_processor));
+	printf("MPX:%-4s MHz\n", strmhz(buf1, sysinfo.freq_systembus));
 	printf("       DDR:%-4s MHz (%s MT/s data rate), ",
-		strmhz(buf1, sysinfo.freqSystemBus / 2),
-		strmhz(buf2, sysinfo.freqSystemBus));
+		strmhz(buf1, sysinfo.freq_systembus / 2),
+		strmhz(buf2, sysinfo.freq_systembus));
 
-	if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
-		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+	if (sysinfo.freq_localbus > LCRR_CLKDIV) {
+		printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
 	} else {
 		printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
-		       sysinfo.freqLocalBus);
+		       sysinfo.freq_localbus);
 	}
 
 	puts("L1:    D-cache 32 KB enabled\n");

@@ -131,7 +131,7 @@ get_tbclk(void)
 	sys_info_t sys_info;
 
 	get_sys_info(&sys_info);
-	return (sys_info.freqSystemBus + 3L) / 4L;
+	return (sys_info.freq_systembus + 3L) / 4L;
 }

arch/powerpc/cpu/mpc86xx/speed.c +21 ~~-19~~

index ea366ab..854d02b 100644
@@ -19,7 +19,7 @@ DECLARE_GLOBAL_DATA_PTR;
 /* used in some defintiions of CONFIG_SYS_CLK_FREQ */
 extern unsigned long get_board_sys_clk(unsigned long dummy);
 
-void get_sys_info(sys_info_t *sysInfo)
+void get_sys_info(sys_info_t *sys_info)
 {
 	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
 	volatile ccsr_gur_t *gur = &immap->im_gur;

@@ -31,7 +31,7 @@ void get_sys_info(sys_info_t *sysInfo)
 
 	switch (plat_ratio) {
 	case 0x0:
-		sysInfo->freqSystemBus = 16 * CONFIG_SYS_CLK_FREQ;
+		sys_info->freq_systembus = 16 * CONFIG_SYS_CLK_FREQ;
 		break;
 	case 0x02:
 	case 0x03:

@@ -43,10 +43,10 @@ void get_sys_info(sys_info_t *sysInfo)
 	case 0x0a:
 	case 0x0c:
 	case 0x10:
-		sysInfo->freqSystemBus = plat_ratio * CONFIG_SYS_CLK_FREQ;
+		sys_info->freq_systembus = plat_ratio * CONFIG_SYS_CLK_FREQ;
 		break;
 	default:
-		sysInfo->freqSystemBus = 0;
+		sys_info->freq_systembus = 0;
 		break;
 	}

@@ -55,25 +55,26 @@ void get_sys_info(sys_info_t *sysInfo)
 
 	switch (e600_ratio) {
 	case 0x10:
-		sysInfo->freqProcessor = 2 * sysInfo->freqSystemBus;
+		sys_info->freq_processor = 2 * sys_info->freq_systembus;
 		break;
 	case 0x19:
-		sysInfo->freqProcessor = 5 * sysInfo->freqSystemBus / 2;
+		sys_info->freq_processor = 5 * sys_info->freq_systembus / 2;
 		break;
 	case 0x20:
-		sysInfo->freqProcessor = 3 * sysInfo->freqSystemBus;
+		sys_info->freq_processor = 3 * sys_info->freq_systembus;
 		break;
 	case 0x39:
-		sysInfo->freqProcessor = 7 * sysInfo->freqSystemBus / 2;
+		sys_info->freq_processor = 7 * sys_info->freq_systembus / 2;
 		break;
 	case 0x28:
-		sysInfo->freqProcessor = 4 * sysInfo->freqSystemBus;
+		sys_info->freq_processor = 4 * sys_info->freq_systembus;
 		break;
 	case 0x1d:
-		sysInfo->freqProcessor = 9 * sysInfo->freqSystemBus / 2;
+		sys_info->freq_processor = 9 * sys_info->freq_systembus / 2;
 		break;
 	default:
-		sysInfo->freqProcessor = e600_ratio + sysInfo->freqSystemBus;
+		sys_info->freq_processor = e600_ratio +
+						sys_info->freq_systembus;
 		break;
 	}

@@ -84,10 +85,11 @@ void get_sys_info(sys_info_t *sysInfo)
 	lcrr_div = in_be32(&immap->im_lbc.lcrr) & LCRR_CLKDIV;
 #endif
 	if (lcrr_div == 2 || lcrr_div == 4 || lcrr_div == 8) {
-		sysInfo->freqLocalBus = sysInfo->freqSystemBus / (lcrr_div * 2);
+		sys_info->freq_localbus = sys_info->freq_systembus
+							/ (lcrr_div * 2);
 	} else {
 		/* In case anyone cares what the unknown value is */
-		sysInfo->freqLocalBus = lcrr_div;
+		sys_info->freq_localbus = lcrr_div;
 	}
 }

@@ -102,9 +104,9 @@ int get_clocks(void)
 	sys_info_t sys_info;
 
 	get_sys_info(&sys_info);
-	gd->cpu_clk = sys_info.freqProcessor;
-	gd->bus_clk = sys_info.freqSystemBus;
-	gd->arch.lbc_clk = sys_info.freqLocalBus;
+	gd->cpu_clk = sys_info.freq_processor;
+	gd->bus_clk = sys_info.freq_systembus;
+	gd->arch.lbc_clk = sys_info.freq_localbus;
 
 	/*
 	 * The base clock for I2C depends on the actual SOC.  Unfortunately,

@@ -114,9 +116,9 @@ int get_clocks(void)
 	 * AN2919.
 	 */
 #ifdef CONFIG_MPC8610
-	gd->arch.i2c1_clk = sys_info.freqSystemBus;
+	gd->arch.i2c1_clk = sys_info.freq_systembus;
 #else
-	gd->arch.i2c1_clk = sys_info.freqSystemBus / 2;
+	gd->arch.i2c1_clk = sys_info.freq_systembus / 2;
 #endif
 	gd->arch.i2c2_clk = gd->arch.i2c1_clk;

@@ -138,7 +140,7 @@ ulong get_bus_freq(ulong dummy)
 	sys_info_t sys_info;
 
 	get_sys_info(&sys_info);
-	val = sys_info.freqSystemBus;
+	val = sys_info.freq_systembus;
 
 	return val;
 }

board/freescale/mpc8540ads/mpc8540ads.c +1 -1

index 7a84cd2..2fb4037 100644
@@ -68,7 +68,7 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
 		lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */

board/freescale/mpc8541cds/mpc8541cds.c +1 -1

index 3d2dabd..1e21a66 100644
@@ -250,7 +250,7 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
 		lbc->lcrr |= LCRR_DBYP;	/* DLL Bypass */

board/freescale/mpc8555cds/mpc8555cds.c +1 -1

index d4e7abe..ee92695 100644
@@ -248,7 +248,7 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
 		lbc->lcrr |= LCRR_DBYP;	/* DLL Bypass */

board/freescale/mpc8560ads/mpc8560ads.c +1 -1

index a45a558..162636e 100644
@@ -273,7 +273,7 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_hz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	if (lbc_hz < 66) {
 		lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP;	/* DLL Bypass */

board/freescale/p1_p2_rdb_pc/ddr.c +1 -1

index 5c51845..c0b72e0 100644
@@ -247,7 +247,7 @@ phys_size_t fixed_sdram(void)
 
 	get_sys_info(&sysinfo);
 	printf("Configuring DDR for %s MT/s data rate\n",
-			strmhz(buf, sysinfo.freqDDRBus));
+			strmhz(buf, sysinfo.freq_ddrbus));
 
 	ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;

board/freescale/p1_twr/ddr.c +1 -1

index 697c0dd..67f69d7 100644
@@ -53,7 +53,7 @@ phys_size_t fixed_sdram(void)
 
 	get_sys_info(&sysinfo);
 	printf("Configuring DDR for %s MT/s data rate\n",
-			strmhz(buf, sysinfo.freqDDRBus));
+			strmhz(buf, sysinfo.freq_ddrbus));
 
 	ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;

board/sbc8548/sbc8548.c +2 -2

index dee8710..8378518 100644
@@ -65,8 +65,8 @@ local_bus_init(void)
 
 	get_sys_info(&sysinfo);
 
-	lbc_mhz = sysinfo.freqLocalBus / 1000000;
-	clkdiv = sysinfo.freqSystemBus / sysinfo.freqLocalBus;
+	lbc_mhz = sysinfo.freq_localbus / 1000000;
+	clkdiv = sysinfo.freq_systembus / sysinfo.freq_localbus;
 
 	debug("LCRR=0x%x, CD=%d, MHz=%d\n", lcrr, clkdiv, lbc_mhz);

board/socrates/socrates.c +1 -1

index 97fd0e4..2caefbb 100644
@@ -143,7 +143,7 @@ void local_bus_init (void)
 
 	get_sys_info (&sysinfo);
 	clkdiv = lbc->lcrr & LCRR_CLKDIV;
-	lbc_mhz = sysinfo.freqSystemBus / 1000000 / clkdiv;
+	lbc_mhz = sysinfo.freq_systembus / 1000000 / clkdiv;
 
 	/* Disable PLL bypass for Local Bus Clock >= 66 MHz */
 	if (lbc_mhz >= 66)

board/xes/xpedite537x/ddr.c +1 -1

index 0daa189..c128fcb 100644
@@ -210,7 +210,7 @@ void fsl_ddr_board_options(memctl_options_t *popts,
 	unsigned int datarate;
 
 	get_sys_info(&sysinfo);
-	datarate = sysinfo.freqDDRBus / 1000 / 1000;
+	datarate = sysinfo.freq_ddrbus / 1000 / 1000;
 
 	for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) {
 		if ((bopts[i].datarate_mhz_low <= datarate) &&

drivers/spi/fsl_espi.c +1 -1

index c883d3c..7c84582 100644
@@ -75,7 +75,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 
 	/* Set eSPI BRG clock source */
 	get_sys_info(&sysinfo);
-	spibrg = sysinfo.freqSystemBus / 2;
+	spibrg = sysinfo.freq_systembus / 2;
 	fsl->div16 = 0;
 	if ((spibrg / max_hz) > 32) {
 		fsl->div16 = ESPI_CSMODE_DIV16;

include/e500.h +8 -8

index 0ff8e89..0c24326 100644
@@ -10,19 +10,19 @@
 
 typedef struct
 {
-  unsigned long freqProcessor[CONFIG_MAX_CPUS];
-  unsigned long freqSystemBus;
-  unsigned long freqDDRBus;
-  unsigned long freqLocalBus;
-  unsigned long freqQE;
+	unsigned long freq_processor[CONFIG_MAX_CPUS];
+	unsigned long freq_systembus;
+	unsigned long freq_ddrbus;
+	unsigned long freq_localbus;
+	unsigned long freq_qe;
 #ifdef CONFIG_SYS_DPAA_FMAN
-  unsigned long freqFMan[CONFIG_SYS_NUM_FMAN];
+	unsigned long freq_fman[CONFIG_SYS_NUM_FMAN];
 #endif
 #ifdef CONFIG_SYS_DPAA_QBMAN
-  unsigned long freqQMAN;
+	unsigned long freq_qman;
 #endif
 #ifdef CONFIG_SYS_DPAA_PME
-  unsigned long freqPME;
+	unsigned long freq_pme;
 #endif
 } MPC85xx_SYS_INFO;

include/mpc86xx.h +3 -3

index 31e83f2..9fe4748 100644
@@ -41,9 +41,9 @@
 #ifndef __ASSEMBLY__
 
 typedef struct {
-	unsigned long freqProcessor;
-	unsigned long freqSystemBus;
-	unsigned long freqLocalBus;
+	unsigned long freq_processor;
+	unsigned long freq_systembus;
+	unsigned long freq_localbus;
 } MPC86xx_SYS_INFO;
 
 #define l1icache_enable	icache_enable

Signature · 1 line

1.7.9.5

York Sun

2013-08-20 17:07 UTC #1 lore raw

PATCH v2 1/1 powerpc: Fix CamelCase checkpatch warnings

Quoted 21 lines · Prabhakar Kushwaha

85xx, 86xx PowerPC folders have code variables with CamelCase naming conventions. because of this code checkpatch script generates "WARNING: Avoid CamelCase".
Convert variables name to normal naming convention and modify board, driver files with updated the new structure.
Signed-off-by Prabhakar Kushwaha <[email protected]>
---
Chages for v2: Incorporated Thomas's comments
- Take care of git bisectable
 arch/powerpc/cpu/mpc85xx/cpu.c          |   43 +++++-----
 arch/powerpc/cpu/mpc85xx/fdt.c          |   10 +--
 arch/powerpc/cpu/mpc85xx/speed.c        |  142 +++++++++++++++----------------
 arch/powerpc/cpu/mpc86xx/cpu.c          |   16 ++--
 arch/powerpc/cpu/mpc86xx/speed.c        |   40 ++++-----
 board/freescale/mpc8540ads/mpc8540ads.c |    2 +-
 board/freescale/mpc8541cds/mpc8541cds.c |    2 +-
 board/freescale/mpc8555cds/mpc8555cds.c |    2 +-
 board/freescale/mpc8560ads/mpc8560ads.c |    2 +-
 board/freescale/p1_p2_rdb_pc/ddr.c      |    2 +-

Quoted 8 lines

 board/freescale/p1_twr/ddr.c            |    2 +-
 board/sbc8548/sbc8548.c                 |    4 +-
 board/socrates/socrates.c               |    2 +-
 board/xes/xpedite537x/ddr.c             |    2 +-
 drivers/spi/fsl_espi.c                  |    2 +-
 include/e500.h                          |   16 ++--
 include/mpc86xx.h                       |    6 +-
 17 files changed, 149 insertions(+), 146 deletions(-)

Applied to u-boot-mpc85xx.git.

York