ntp: Make periodic RTC update more reliable
Miroslav Lichvar
reviewerPATCH 1/1 ntp: Make periodic RTC update more reliable
The current code requires that the scheduled update of the RTC happens in the closest tick to the half of the second. This seems to be difficult to achieve reliably. The scheduled work may be missing the target time by a tick or two and be constantly rescheduled every second.
Relax the limit to 10 ticks. As a typical RTC drifts in the 11-minute update interval by several milliseconds, this shouldn't affect the overall accuracy of the RTC much.
--- kernel/time/ntp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
kernel/time/ntp.c +2 -1
@@ -475,6 +475,7 @@ static void sync_cmos_clock(struct work_struct *work)* called as close as possible to 500 ms before the new second starts. * This code is run on a timer. If the clock is set, that timer * may not expire at the correct time. Thus, we adjust... +* We want the clock to be within a couple of ticks from the target. */ if (!ntp_synced ()) {/*
@@ -485,7 +486,7 @@ static void sync_cmos_clock(struct work_struct *work) }getnstimeofday (&now); -if (abs (now.tv_nsec - (NSEC_PER_SEC /2 )) <= tick_nsec /2 ) { +if (abs (now.tv_nsec - (NSEC_PER_SEC /2 )) <= tick_nsec *5 ) {struct timespec adjust = now; fail = -ENODEV ;
Signature · 1 line
1.8.3.1
John Stultz
AppliedQuoted 27 lines · Miroslav Lichvar
The current code requires that the scheduled update of the RTC happens in the closest tick to the half of the second. This seems to be difficult to achieve reliably. The scheduled work may be missing the target time by a tick or two and be constantly rescheduled every second.
Relax the limit to 10 ticks. As a typical RTC drifts in the 11-minute update interval by several milliseconds, this shouldn't affect the overall accuracy of the RTC much.
Signed-off-by Miroslav Lichvar <[email protected]>--- kernel/time/ntp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)kernel/time/ntp.c +1
-0@@ -475,6 +475,7 @@ static void sync_cmos_clock(struct work_struct *work)* called as close as possible to 500 ms before the new second starts. * This code is run on a timer. If the clock is set, that timer * may not expire at the correct time. Thus, we adjust... +* We want the clock to be within a couple of ticks from the target. */ if (!ntp_synced ()) {/*
kernel/time/ntp.c static void sync_cmos_clock(struct work_struct *work) · line 492
Quoted 8 lines
kernel/time/ntp.c +1
-1@@ -485,7 +486,7 @@ static void sync_cmos_clock(struct work_struct *work) }getnstimeofday (&now); -if (abs (now.tv_nsec - (NSEC_PER_SEC /2 )) <= tick_nsec /2 ) { +if (abs (now.tv_nsec - (NSEC_PER_SEC /2 )) <= tick_nsec *5 ) {struct timespec adjust = now; fail = -ENODEV ;
Applied to my 3.12 branch.
thanks
-john