First build stuck at a Single Task..
I am Building the recipe for the first time.
Based on the Documentation, I clone the GIT repo of Poky and the other tasks that were mentioned in the mega manual, (quick Start). I ran this command
"bitbake -k core-image-sato"
all is well, but the build process seems to be stuck at this point.
-------------------------------------------------------------------------------------------------------------
Loading cache: 100% |#################################################################################################################| ETA: 00:00:00 Loaded 1181 entries from dependency cache.
Build Configuration:
BB_VERSION = "1.19.1" BUILD_SYS = "x86_64-linux" NATIVELSBSTRING = "openSUSE-project-12.3" TARGET_SYS = "arm-poky-linux-gnueabi" MACHINE = "qemuarm" DISTRO = "poky" DISTRO_VERSION = "1.4+snapshot-20130827" TUNE_FEATURES = "armv5 thumb dsp" TARGET_FPU = "soft"
meta
meta-yocto
meta-yocto-bsp = "master:b2ff1add530b1fec2fb7f385227a03db47015c37"
NOTE: Resolving any missing task queue dependencies
NOTE: multiple providers are available for runtime libasound-module-bluez (bluez4, bluez5)
NOTE: consider defining a PREFERRED_PROVIDER entry to match libasound-module-bluez
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
Currently 1 running tasks (1587 of 5917):
*0: linux-yocto-3.8.13+gitAUTOINC+e7f42a416a_aa76cc2840-r4.2 do_fetch (pid 2006)*
-----------------------------------------------------------------------------------------------------------------------
It has been like this for the past 4 Hours. Internet download Traffic is around 124KB/s on system monitor (no other process using Internet).
I have set the number of jobs in the local conf file as '9' and
I have re-initialted the command from the same directory once the previous build failed.
Quoted 15 lines · Arun M Kumar
NOTE: Resolving any missing task queue dependencies
NOTE: multiple providers are available for runtime libasound-module-bluez (bluez4, bluez5)
NOTE: consider defining aPREFERRED_PROVIDERentry to match libasound-module-bluez
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
Currently 1 running tasks (1587 of 5917):
*0: linux-yocto-3.8.13+gitAUTOINC+e7f42a416a_aa76cc2840-r4.2do_fetch(pid 2006)*-----------------------------------------------------------------------------------------------------------------------
Quoted 9 lines
It has been like this for the past 4 Hours. Internet download Traffic is around 124KB/s on system monitor (no other process using Internet).
I have set the number of jobs in the local conf file as '9' and
I have re-initialted the command from the same directory once the previous build failed.
this 'task' is actually doing a 'git clone' of the entire linux-yocto kernel repository. The SRC_URI is
SRC_URI = "git:// git.yoctoproject.org/linux-yocto-3.8.git;protocol=git;bareclone=1;branch=${KBRANCH},${KMETA};name=machine,meta"
so, it might very well just go well , but it's slow. it should be 'cloning' in this folder:
<build>/downloads/git2/git.yoctoproject.org.linux-yocto-3.8.git
you should be able to see that folder size growing, if not, then there can be a problem.