wireless kernel driver porting
Hi all, I've bought a USB wireless TA bundled with GPL Linux drivers for 2.6.11 kernel series.
The driver seems to compile fine with 2.6.15-gentoo-r1 on x86, but can't be used on x86_64 systems. Technical support can't provide a porting of the driver in the short time.
It seems that there are no driver included in the current kernel tree for this wireless TA:
Conitech Dakota Wireless TA 56Mbps.
The driver provided is the IS89C35 Wireless Linux Driver 3.0.47.0, copyrighted by Winbond Electronic Corporation, ISSC and released with MODULE_LICENSE("GPL");
I haven't a ftp server where to put the driver tarball so if you can help me tell me where I can send an email with the driver as attachment ~500kb. Please CC me in your reply, I'm not subscribed to the list.
___________________________________
Vinci i biglietti per FIFA World Cup in Germania! yahoo.it/concorso_messenger
Quoted 3 lines
Hi all, I've bought a USB wireless TA bundled with GPL Linux drivers for 2.6.11 kernel series.
Hi. Maybe I can help u providing some http space. I also bought "Conitech Dakota Wireless TA 56Mbps" but drivers are currently not working: my version is "hal_059"...
Adding support for IDE on nCS5 on an ARM7
I'm working on getting the IDE subsystem to communicate with an IDE device wired to nCS5 on a CLEP7312 board. I have0x50000000 set to be remapped to 0xfe100000 but whenever I try to access the registers I get kernel crashes. I'm sure I'm doing something wrong, since this works on a 2.6 kernel... but I don't know where to find what I'm doing wrong.
Could somebody perhaps let me know if they know what I'm doing wrong, or point me in the right direction of the relevant documentation?
The error below is from trying to access as 32-bit wide blocks, same thing happens if I try to read it as an 8-bit block...
It also does the same thing if I don't do the mapping and try to access at the physical base address... but of course I shouldn't be doing that anyways right?
Thanks,
Sam
Segfault:
-------------------------------------------------------------------------IO_SYSCON1 = 0x000401C0IO_SYSCON2 = 0x00040100IO_SYSCON3 = 0x00040026IO_MEMCFG1 = 0x00000080IO_MEMCFG2 = 0xFFFDBD00
inb_ide(0xfe100007)
Unable to handle kernel paging request at virtual address fe100004 pgd = c0024000 [fe100004] *pgd=00000000 Internal error: Oops: e3c11005 [#1] CPU: 0 PC is at ide_inb+0x70/0xe0 LR is at _spin_unlock_irqrestore+0x14/0x1c pc : [<c012e668>] lr : [<c014da10>] Not tainted
sp : c01e1ef8 ip : 00000000 fp : c01e1f10
r10: c0036848 r9 : 60000013 r8 : 00000000
r7 : c01bc6a8 r6 : fe100007 r5 : c01bc698 r4 : 000088b7 r3 : fe100004 r2 : c018517c r1 : c0176bf4 r0 : 00000017
Flags: nZCv IRQs on FIQs on Mode SVC_32 Segment kernel
Control: 217B
Table: C0024017 DAC: 00000017
Process swapper (pid: 1, stack limit = 0xc01e0250)
Stack: (0xc01e1ef8 to 0xc01e2000)
1ee0: 000088b7 c01bc698
1f00: c01bc698 c01e1f28 c01e1f14 c012fec8 c012e608 c01bce9c 00000003 c01e1f60 1f20:c01e1f2c c013133c c012fea8 c01e1f58 00000006 c00c062c c01bce9c 00000003
1f40: c01e1f78 c0036d64 00000000 00000000 c0036848 c01e1f90 c01e1f64 c01324f0 1f60:c0131258 00000001 00000001 00000001 00000001 00000000 c003682c c01e0000
1f80: c0036d64 c01e1fa0 c01e1f94 c0035d38 c0132488 c01e1ff4 c01e1fa4 c0039100 1fa0:c0035d38 00000001 c0039e44 c0042f20 00000000 00000000 c0039058 c0049a34
1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0:
00000000 00000000 00000000 c01e1ff8 c0049a34 c0039068 82504000 60208006
Backtrace: [<c012e5f8>] (ide_inb+0x0/0xe0) from [<c012fec8>] (ide_wait_not_busy+0x30/0x74) r6 = C01BC698 r5 = C01BC698 r4 = 000088B7 [<c012fe98>] (ide_wait_not_busy+0x0/0x74) from [<c013133c>] (probe_hwif+0xf4/0x7c0) r5 = 00000003 r4 = C01BCE9C [<c0131248>] (probe_hwif+0x0/0x7c0) from [<c01324f0>] (ideprobe_init+0x78/0x160) [<c0132478>] (ideprobe_init+0x0/0x160) from [<c0035d38>] (ide_generic_init+0x10/0x1c) r7 = C0036D64 r6 = C01E0000 r5 = C003682C r4 = 00000000 [<c0035d28>] (ide_generic_init+0x0/0x1c) from [<c0039100>] (init+0xa8/0x274) [<c0039058>] (init+0x0/0x274) from [<c0049a34>] (do_exit+0x0/0x770) Code: e1a01006 e59f006c ebfc66c7 e3c63003 (e5934000) <0>Kernel panic - not syncing: Attempted to kill init! -------------------------------------------------------------------------
#define EP7312_PHYS_IDE CS5_PHYS_BASE
#define EP7312_VIRT_IDE (0xfe100000)
-------------------------------------------------------------------------
Mapping line:
static struct map_desc edb7211_io_desc[] __initdata = {
{ /* Phatnoise IDE */
.virtual = EP7312_VIRT_IDE,
.pfn = __phys_to_pfn(EP7312_PHYS_IDE),
.length = SZ_1M,
.type = MT_DEVICE,
},
};
Machine definition:
-------------------------------------------------------------------------MACHINE_START(CLEP7212, "Cirrus Logic 7212/7312")
/* Maintainer: Nobody */
.phys_io = 0x80000000,
.io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
.boot_params = 0xc0000100,
.fixup = fixup_clep7312,
.map_io = clps711x_map_io,
.init_irq = clps711x_init_irq,
.timer = &clps711x_timer,MACHINE_END