Skip to contentSkip to conversation

i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework

PATCH Superseded Heiko Schocher 2 participants 3 messages Aug 30, 2013 – Sep 2, 2013

Subsystems (2)
Arm (32-bit) I2C

v3 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

Heiko Schocher

author
#0 lore raw

PATCH v3 1/1 i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework

- add omap24xx driver to new multibus/multiadpater support
- adapted all config files, which uses this driver

Tested on the am335x based siemens boards rut, dxr2 and pxm2 posted here:
http://patchwork.ozlabs.org/patch/263211/

Signed-off-by Heiko Schocher <[email protected]>
Cc Tom Rini <[email protected]>
Cc Lars Poeschel <[email protected]>
Cc Steve Sakoman <[email protected]>
Cc Thomas Weber <[email protected]>
Cc Tom Rix <[email protected]>
Cc Grazvydas Ignotas <[email protected]>
Cc Enric Balletbo i Serra <[email protected]>
Cc Luca Ceresoli <[email protected]>
Cc Igor Grinberg <[email protected]>
Cc Ilya Yanok <[email protected]>
Cc Stefano Babic <[email protected]>
Cc Nishanth Menon <[email protected]>
Cc Pali Roh?r <[email protected]>
Cc Peter Barada <[email protected]>
Cc Nagendra T S <[email protected]>
Cc Michael Jones <[email protected]>
Cc Raphael Assenat <[email protected]>

---
- changes for v2:
rebased against u-boot-ti 425faf74cd8189c87919f7e72a0101c684ee3b9f
- changes for v3:
rebase against: u-boot-it 901ce27c6f018992b7dd6c08d3c98cf217cc4c96 add siemens boards (rut, dxr2 and pxm2)

---
 README                                         |  13 ++
 arch/arm/cpu/armv7/omap-common/clocks-common.c |   3 +-
 arch/arm/cpu/armv7/omap3/board.c               |   2 +-
 arch/arm/cpu/armv7/omap3/clock.c               |   2 +-
 arch/arm/include/asm/arch-am33xx/i2c.h         |   6 +-
 board/compulab/cm_t35/Makefile                 |   2 +-
 board/compulab/cm_t35/cm_t35.c                 |   2 +-
 board/compulab/cm_t35/eeprom.h                 |   2 +-
 board/logicpd/am3517evm/am3517evm.c            |   4 +-
 board/overo/overo.c                            |   2 +-
 board/phytec/pcm051/board.c                    |   4 +-
 board/siemens/common/board.c                   |   4 +-
 board/ti/am335x/board.c                        |   2 +-
 board/ti/am3517crane/am3517crane.c             |   4 +-
 board/ti/evm/evm.c                             |   4 +-
 drivers/i2c/Makefile                           |   4 +-
 drivers/i2c/omap24xx_i2c.c                     | 172 ++++++++++++++++---------
 include/configs/am335x_evm.h                   |   1 -
 include/configs/am3517_crane.h                 |   8 +-
 include/configs/am3517_evm.h                   |   8 +-
 include/configs/cm_t35.h                       |   8 +-
 include/configs/devkit8000.h                   |   8 +-
 include/configs/dig297.h                       |   8 +-
 include/configs/igep00x0.h                     |   8 +-
 include/configs/mcx.h                          |   8 +-
 include/configs/nokia_rx51.h                   |   8 +-
 include/configs/omap3_beagle.h                 |   9 +-
 include/configs/omap3_evm_common.h             |   9 +-
 include/configs/omap3_logic.h                  |  10 +-
 include/configs/omap3_mvblx.h                  |   9 +-
 include/configs/omap3_overo.h                  |   9 +-
 include/configs/omap3_pandora.h                |   8 +-
 include/configs/omap3_sdp3430.h                |   8 +-
 include/configs/omap3_zoom1.h                  |   8 +-
 include/configs/omap3_zoom2.h                  |   8 +-
 include/configs/omap4_common.h                 |   9 +-
 include/configs/pcm051.h                       |   9 +-
 include/configs/siemens-am33x-common.h         |   9 +-
 include/configs/tam3517-common.h               |  11 +-
 include/configs/ti_armv7_common.h              |   9 +-
 include/configs/tricorder.h                    |   8 +-

41 Dateien ge?ndert, 238 Zeilen hinzugef?gt(+), 192 Zeilen entfernt(-)

README +13 -0
index 78aa5a5..a30ea31 100644
@@ -1974,6 +1974,19 @@ CBFS (Coreboot Filesystem) support
 		  - CONFIG_SYS_I2C_PPC4XX_CH0 activate hardware channel 0
 		  - CONFIG_SYS_I2C_PPC4XX_CH1 activate hardware channel 1
 
+		- drivers/i2c/omap24xx_i2c.c
+		  - activate this driver with CONFIG_SYS_I2C_OMAP24XX
+		  - CONFIG_SYS_OMAP24_I2C_SPEED speed channel 0
+		  - CONFIG_SYS_OMAP24_I2C_SLAVE slave addr channel 0
+		  - CONFIG_SYS_OMAP24_I2C_SPEED1 speed channel 1
+		  - CONFIG_SYS_OMAP24_I2C_SLAVE1 slave addr channel 1
+		  - CONFIG_SYS_OMAP24_I2C_SPEED2 speed channel 2
+		  - CONFIG_SYS_OMAP24_I2C_SLAVE2 slave addr channel 2
+		  - CONFIG_SYS_OMAP24_I2C_SPEED3 speed channel 3
+		  - CONFIG_SYS_OMAP24_I2C_SLAVE3 slave addr channel 3
+		  - CONFIG_SYS_OMAP24_I2C_SPEED4 speed channel 4
+		  - CONFIG_SYS_OMAP24_I2C_SLAVE4 slave addr channel 4
+
 		additional defines:
 
 		CONFIG_SYS_NUM_I2C_BUSES
arch/arm/cpu/armv7/omap-common/clocks-common.c +2 -1
index 7580594..fc70595 100644
@@ -786,7 +786,8 @@ void gpi2c_init(void)
 	static int gpi2c = 1;
 
 	if (gpi2c) {
-		i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+		i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED,
+			 CONFIG_SYS_OMAP24_I2C_SLAVE);
 		gpi2c = 0;
 	}
 }
arch/arm/cpu/armv7/omap3/board.c +1 -1
index 7d1f8d9..2922816 100644
@@ -98,7 +98,7 @@ void spl_board_init(void)
 	gpmc_init();
 #endif
 #ifdef CONFIG_SPL_I2C_SUPPORT
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
 }
 #endif /* CONFIG_SPL_BUILD */
arch/arm/cpu/armv7/omap3/clock.c +1 -1
index 9f989ff..14fc7e8 100644
@@ -708,7 +708,7 @@ void per_clocks_enable(void)
 	sr32(&prcm_base->iclken_per, 17, 1, 1);
 #endif
 
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
 	/* Turn on all 3 I2C clocks */
 	sr32(&prcm_base->fclken1_core, 15, 3, 0x7);
 	sr32(&prcm_base->iclken1_core, 15, 3, 0x7);	/* I2C1,2,3 = on */
arch/arm/include/asm/arch-am33xx/i2c.h +3 -3
index 8bfa53f..8642c8f 100644
@@ -4,8 +4,8 @@
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
-#ifndef _I2C_H_
-#define _I2C_H_
+#ifndef _I2C_AM33XX_H_
+#define _I2C_AM33XX_H_
 
 #define  I2C_BASE1		0x44E0B000
 #define  I2C_BASE2		0x4802A000

@@ -62,4 +62,4 @@ struct i2c {
 #define I2C_IP_CLK			48000000
 #define I2C_INTERNAL_SAMPLING_CLK	12000000
 
-#endif /* _I2C_H_ */
+#endif /* _I2C_AM33XX_H_ */
board/compulab/cm_t35/Makefile +1 -1
index 6d07947..9014d2a 100644
@@ -11,7 +11,7 @@ include $(TOPDIR)/config.mk
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += eeprom.o
+COBJS-$(CONFIG_SYS_I2C_OMAP34XX) += eeprom.o
 COBJS-$(CONFIG_LCD) += display.o
 
 COBJS	:= cm_t35.o leds.o $(COBJS-y)
board/compulab/cm_t35/cm_t35.c +1 -1
index 3caa5be..1dd3647 100644
@@ -470,7 +470,7 @@ static void setup_net_chip_gmpc(void)
 		&ctrl_base->gpmc_nadv_ale);
 }
 
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
 /*
  * Routine: reset_net_chip
  * Description: reset the Ethernet controller via TPS65930 GPIO
board/compulab/cm_t35/eeprom.h +1 -1
index 02ffbb1..a07559d 100644
@@ -10,7 +10,7 @@
 #ifndef _EEPROM_
 #define _EEPROM_
 
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
 int cm_t3x_eeprom_read_mac_addr(uchar *buf);
 u32 cm_t3x_eeprom_get_board_rev(void);
 #else
board/logicpd/am3517evm/am3517evm.c +2 -2
index 1cabc80..33709bd 100644
@@ -98,8 +98,8 @@ static void am3517_evm_musb_init(void)
  */
 int misc_init_r(void)
 {
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C_OMAP34XX
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
 
 	dieid_num_r();
board/overo/overo.c +1 -1
index aace42a..9ac35d2 100644
@@ -92,7 +92,7 @@ int get_board_revision(void)
 {
 	int revision;
 
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
+#ifdef CONFIG_SYS_I2C_OMAP34XX
 	unsigned char data;
 
 	/* board revisions <= R2410 connect 4030 irq_1 to gpio112             */
board/phytec/pcm051/board.c +2 -2
index e40b0bd..a2ad650 100644
@@ -91,7 +91,7 @@ void set_mux_conf_regs(void)
 {
 	/* Initalize the board header */
 	enable_i2c0_pin_mux();
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 
 	enable_board_pin_mux();
 }

@@ -108,7 +108,7 @@ void sdram_init(void)
  */
 int board_init(void)
 {
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 
 	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
board/siemens/common/board.c +2 -2
index 6279c32..32d2ee4 100644
@@ -42,7 +42,7 @@ void set_mux_conf_regs(void)
 {
 	/* Initalize the board header */
 	enable_i2c0_pin_mux();
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(0);
 	if (read_eeprom() < 0)
 		puts("Could not get board ID.\n");
 

@@ -67,7 +67,7 @@ int board_init(void)
 #if defined(CONFIG_HW_WATCHDOG)
 	hw_watchdog_init();
 #endif /* defined(CONFIG_HW_WATCHDOG) */
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_set_bus_num(0);
 	if (read_eeprom() < 0)
 		puts("Could not get board ID.\n");
board/ti/am335x/board.c +1 -1
index cc04426..f78af9a 100644
@@ -249,7 +249,7 @@ const struct dpll_params *get_dpll_ddr_params(void)
 	struct am335x_baseboard_id header;
 
 	enable_i2c0_pin_mux();
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 	if (read_eeprom(&header) < 0)
 		puts("Could not get board ID.\n");
board/ti/am3517crane/am3517crane.c +2 -2
index 5eb97ff..a649697 100644
@@ -43,8 +43,8 @@ int board_init(void)
  */
 int misc_init_r(void)
 {
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C_OMAP34XX
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
 
 	dieid_num_r();
board/ti/evm/evm.c +2 -2
index c71c218..81dd081 100644
@@ -146,8 +146,8 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
 int misc_init_r(void)
 {
 
-#ifdef CONFIG_DRIVER_OMAP34XX_I2C
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+#ifdef CONFIG_SYS_I2C_OMAP34XX
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE);
 #endif
 
 #if defined(CONFIG_CMD_NET)
drivers/i2c/Makefile +2 -2
index 37ccbd1..f32daea 100644
@@ -17,8 +17,6 @@ COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
 COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
 COBJS-$(CONFIG_I2C_MXS) += mxs_i2c.o
 COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
-COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
-COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
 COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o
 COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
 COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o

@@ -30,6 +28,8 @@ COBJS-$(CONFIG_SYS_I2C) += i2c_core.o
 COBJS-$(CONFIG_SYS_I2C_FSL) += fsl_i2c.o
 COBJS-$(CONFIG_SYS_I2C_FTI2C010) += fti2c010.o
 COBJS-$(CONFIG_SYS_I2C_PPC4XX) += ppc4xx_i2c.o
+COBJS-$(CONFIG_SYS_I2C_OMAP24XX) += omap24xx_i2c.o
+COBJS-$(CONFIG_SYS_I2C_OMAP34XX) += omap24xx_i2c.o
 COBJS-$(CONFIG_SYS_I2C_SOFT) += soft_i2c.o
 COBJS-$(CONFIG_SYS_I2C_TEGRA) += tegra_i2c.o
 COBJS-$(CONFIG_ZYNQ_I2C) += zynq_i2c.o
drivers/i2c/omap24xx_i2c.c +108 -64

348 lines not on this page · raw message

include/configs/am335x_evm.h +0 -1
index eae5a19..b2c8ea8 100644
@@ -180,7 +180,6 @@
 #define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
 #define CONFIG_BAUDRATE			115200
 
-/* I2C Configuration */
 #define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
include/configs/am3517_crane.h +4 -4
index 1fd2508..73207f9 100644
@@ -142,10 +142,10 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
include/configs/am3517_evm.h +4 -4
index 6500878..fa44597 100644
@@ -136,10 +136,10 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 #undef CONFIG_CMD_NET
 #undef CONFIG_CMD_NFS
include/configs/cm_t35.h +4 -4
index bc5b66c..c301697 100644
@@ -140,10 +140,10 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
 #define CONFIG_I2C_MULTI_BUS
include/configs/devkit8000.h +4 -4
index cb79b4e..670945a 100644
@@ -90,10 +90,10 @@
 #define CONFIG_DOS_PARTITION		1
 
 /* I2C */
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* TWL4030 */
 #define CONFIG_TWL4030_POWER		1
include/configs/dig297.h +4 -4
index 30e3908..e066f7b 100644
@@ -123,10 +123,10 @@
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
include/configs/igep00x0.h +4 -4
index 9982cf6..e1a92f0 100644
@@ -124,10 +124,10 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
include/configs/mcx.h +4 -4
index 85ae016..5a2a693 100644
@@ -137,10 +137,10 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* RTC */
 #define CONFIG_RTC_DS1337
include/configs/nokia_rx51.h +4 -4
index cfc5f12..40a77ff 100644
@@ -157,10 +157,10 @@
 #undef CONFIG_CMD_SETGETDCR		/* DCR support on 4xx */
 
 #define CONFIG_OMAP3_SPI
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
include/configs/omap3_beagle.h +4 -5
index c1245e7..aa8de324e 100644
@@ -161,11 +161,10 @@
 #undef CONFIG_CMD_IMLS		/* List all found images	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_I2C_MULTI_BUS		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_VIDEO_OMAP3	/* DSS Support			*/
 
 /*
include/configs/omap3_evm_common.h +4 -5
index edf6543..bc7d24e 100644
@@ -88,11 +88,10 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * PISMO support
include/configs/omap3_logic.h +4 -6
index ee6db51..b49c5a1 100644
@@ -118,12 +118,10 @@
 /*
  * I2C
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
include/configs/omap3_mvblx.h +4 -5
index 0c88419..6eaeeae 100644
@@ -128,11 +128,10 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_FPGA
 
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
-#define CONFIG_I2C_MULTI_BUS		1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
include/configs/omap3_overo.h +4 -5
index 88380a4..8344028 100644
@@ -98,11 +98,10 @@
 #define CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
include/configs/omap3_pandora.h +4 -4
index 91a2568..4f36d07 100644
@@ -111,10 +111,10 @@
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
include/configs/omap3_sdp3430.h +4 -4
index a5e469c..57929d7 100644
@@ -114,10 +114,10 @@
 /*
  * I2C for power management setup
  */
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* OMITTED:  single 1 Gbit MT29F1G NAND flash */
include/configs/omap3_zoom1.h +4 -4
index c747d52..fdc4ab9 100644
@@ -118,10 +118,10 @@
 #undef CONFIG_CMD_NFS		/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
include/configs/omap3_zoom2.h +4 -4
index cb8c7ec..f749740 100644
@@ -138,10 +138,10 @@
 #undef CONFIG_CMD_NFS			/* NFS support			*/
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /*
  * TWL4030
include/configs/omap4_common.h +4 -5
index e9f2383..97d5a6b 100644
@@ -73,11 +73,10 @@
 #define CONFIG_ARCH_CPU_INIT
 
 /* I2C  */
-#define CONFIG_HARD_I2C			1
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
-#define CONFIG_I2C_MULTI_BUS		1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* TWL6030 */
 #ifndef CONFIG_SPL_BUILD
include/configs/pcm051.h +4 -5
index d4d4d79..a5c3f6b 100644
@@ -173,11 +173,10 @@
 /* I2C Configuration */
 #define CONFIG_I2C
 #define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP24XX_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP24XX
 #define CONFIG_CMD_EEPROM
 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
include/configs/siemens-am33x-common.h +4 -5
index 6593425..0438d9c 100644
@@ -133,11 +133,10 @@
 /* I2C Configuration */
 #define CONFIG_I2C
 #define CONFIG_CMD_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP24XX_I2C
-
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	OMAP_I2C_STANDARD
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP24XX
 
 /* Defines for SPL */
 #define CONFIG_SPL
include/configs/tam3517-common.h +5 -6
index c215f0b..e47b4f7 100644
@@ -117,14 +117,13 @@
 #undef CONFIG_CMD_IMLS
 
 #define CONFIG_SYS_NO_FLASH
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		400000
-#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	400000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 #define CONFIG_SYS_I2C_EEPROM_ADDR	0x50		/* base address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1		/* bytes of address */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW	0x07
-#define CONFIG_DRIVER_OMAP34XX_I2C
-
 
 /*
  * Board NAND Info.

@@ -371,7 +370,7 @@ struct tam3517_module_info {
 
 #define TAM3517_READ_EEPROM(info, ret) \
 do {								\
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);	\
+	i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); \
 	if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,		\
 		(void *)info, sizeof(*info)))			\
 		ret = 1;					\
include/configs/ti_armv7_common.h +4 -5
index e89e874..72a4ec5 100644
@@ -60,12 +60,11 @@
 
 /* I2C IP block */
 #define CONFIG_I2C
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_DRIVER_OMAP24XX_I2C
 #define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP24XX
 
 /* MMC/SD IP block */
 #define CONFIG_MMC
include/configs/tricorder.h +4 -4
index a9b2714..8ceb93a 100644
@@ -80,10 +80,10 @@
 #define CONFIG_DOS_PARTITION
 
 /* I2C */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP34XX_I2C	1
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
+#define CONFIG_SYS_I2C_OMAP34XX
 
 /* TWL4030 */
 #define CONFIG_TWL4030_POWER
Signature · 1 line
1.7.11.7
#1 lore raw

PATCH v3 1/1 i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 26 lines · Heiko Schocher

- add omap24xx driver to new multibus/multiadpater support
- adapted all config files, which uses this driver

Tested on the am335x based siemens boards rut, dxr2 and pxm2 posted here:
http://patchwork.ozlabs.org/patch/263211/

Signed-off-by Heiko Schocher <[email protected]>
Cc Tom Rini <[email protected]>
Cc Lars Poeschel <[email protected]>
Cc Steve Sakoman <[email protected]>
Cc Thomas Weber <[email protected]>
Cc Tom Rix <[email protected]>
Cc Grazvydas Ignotas <[email protected]>
Cc Enric Balletbo i Serra <[email protected]>
Cc Luca Ceresoli <[email protected]>
Cc Igor Grinberg <[email protected]>
Cc Ilya Yanok <[email protected]>
Cc Stefano Babic <[email protected]>
Cc Nishanth Menon <[email protected]>
Cc Pali Roh?r <[email protected]>
Cc Peter Barada <[email protected]>
Cc Nagendra T S <[email protected]>
Cc Michael Jones <[email protected]>
Cc Raphael Assenat <[email protected]>
Quoted 6 lines

---
- changes for v2:
rebased against u-boot-ti 425faf74cd8189c87919f7e72a0101c684ee3b9f
- changes for v3:
rebase against: u-boot-it 901ce27c6f018992b7dd6c08d3c98cf217cc4c96 add siemens boards (rut, dxr2 and pxm2)

Did you grab a beagleboard xM or similar and test / fix the problem I found yesterday?

- --
Tom
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/

iQIcBAEBAgAGBQJSII9yAAoJENk4IS6UOR1WUm4P/0/BkXWVjBXMt/Hd4xjySMhJ wna1yxCuHuYqBgiDJO1nOZp2e6dez7RGerm9uey8vNow4wAeTwM2qPOm1URAzi+Z 5cWhxGlchxKOnNfFHwJ7CU48lMsZx5deYD5WrfGKM4/NoMOIBqCDc78QmZU/wycz r0cYCF2Mzmcs1nGoYl+sCJdXwbBuOslUatp2ooNP54yTG77gFximD/NxW3YVONY1 hgYphSxS2okXPV3zWNGKJ3ajfU055kYvcSieoKCVpQ2X/bBGBojTSyxV7A2fFGOU sAQQoSVJJP/D10OJsb+SX/d38oQYBAGWeUQqkla0lE3RG0e2CKpfMLz8kOfqzohg sY/L6j75YXq83YFbtA4TyT16bOZLsQ1gpFe3L4d69k1eOEAbUfDcd46POYeaSgIz rkh8X8snkwxnQOcLnFDGQgmV58ToZRI/3BoZbLsDjKbl0Rx9t135pD5o7pRvx9ZK 4q/SI9Eivh4KhZBwHXTvQwpEZqFD06jb4RRHsGJucI4o4gpQ8oCmV78EvEwjA87+ qAVInpME8HqQXuvzG77Rs/7q69krgFyqAK2BAyaUA9plaLjCfvUv+FMmyGRzHrYE ppMp1cqj+bJy/jyzIhKaiuy4/6xeraGPW6Ew5LOyYJx97ZWCQgGeaO+JKP6BdmMQ rgfuW4+DyNFrFTre57S/
=YcDu
-----END PGP SIGNATURE-----

author
#2 lore raw

PATCH v3 1/1 i2c, omap24xx: convert driver to new mutlibus/mutliadapter framework

Hello Tom,

Am 30.08.2013 14:26, schrieb Tom Rini:

Quoted 37 lines

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Quoted 26 lines · Heiko Schocher

- add omap24xx driver to new multibus/multiadpater support
- adapted all config files, which uses this driver

Tested on the am335x based siemens boards rut, dxr2 and pxm2 posted here:
http://patchwork.ozlabs.org/patch/263211/

Signed-off-by Heiko Schocher<[email protected]>
Cc Tom Rini<[email protected]>
Cc Lars Poeschel<[email protected]>
Cc Steve Sakoman<[email protected]>
Cc Thomas Weber<[email protected]>
Cc Tom Rix<[email protected]>
Cc Grazvydas Ignotas<[email protected]>
Cc Enric Balletbo i Serra<[email protected]>
Cc Luca Ceresoli<[email protected]>
Cc Igor Grinberg<[email protected]>
Cc Ilya Yanok<[email protected]>
Cc Stefano Babic<[email protected]>
Cc Nishanth Menon<[email protected]>
Cc Pali Roh?r<[email protected]>
Cc Peter Barada<[email protected]>
Cc Nagendra T S<[email protected]>
Cc Michael Jones<[email protected]>
Cc Raphael Assenat<[email protected]>
Quoted 6 lines

---
- changes for v2:

   rebased against u-boot-ti 425faf74cd8189c87919f7e72a0101c684ee3b9f

- changes for v3:
rebase against: u-boot-it 901ce27c6f018992b7dd6c08d3c98cf217cc4c96 add siemens boards (rut, dxr2 and pxm2)

Quoted 2 lines

Did you grab a beagleboard xM or similar and test / fix the problem I found yesterday?

I try to do this ASAP...

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany