Enable all cpus in Exynos5420
v3 cover Enable all cpus in Exynos5420
Exynos5420 is an octacore SoC. This patch series enables the remaining 4 cores.
Changes in v2:
- Changed the cpu node @unit-address value to reg property value.
Changes in v3:
- Removed leading 0x from @unit-address value.
Chander Kashyap (2):
clocksource: mct: extend mct to support 8 local interrupts for
Exynos5420
arm: dt: Exynos5420: populate cpu node enteries to 8 cpus
arch/arm/boot/dts/exynos5420.dtsi | 37 +++++++++++++++++++++++++++++++++++-- drivers/clocksource/exynos_mct.c | 4 ++++ 2 files changed, 39 insertions(+), 2 deletions(-)
Signature · 1 line
1.7.9.5
PATCH v3 1/2 clocksource: mct: extend mct to support 8 local interrupts for Exynos5420
Exynos5420 is octacore SoC from Samsung. Hence extend exynos-mct clocksource driver to support 8 local interrupts.
Also extend dt entries for 8 interrupts.
--- arch/arm/boot/dts/exynos5420.dtsi | 9 +++++++-- drivers/clocksource/exynos_mct.c | 4 ++++ 2 files changed, 11 insertions(+), 2 deletions(-)
arch/arm/boot/dts/exynos5420.dtsi +7 -2
@@ -69,7 +69,8 @@ compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, + <8>, <9>, <10>, <11>; clocks = <&clock 1>, <&clock 315>; clock-names = "fin_pll", "mct";
@@ -84,7 +85,11 @@ <4 &gic 0 120 0>, <5 &gic 0 121 0>, <6 &gic 0 122 0>, - <7 &gic 0 123 0>; + <7 &gic 0 123 0>, + <8 &gic 0 128 0>, + <9 &gic 0 129 0>, + <10 &gic 0 130 0>, + <11 &gic 0 131 0>; }; };
drivers/clocksource/exynos_mct.c +4 -0
@@ -71,6 +71,10 @@ enum {MCT_L1_IRQ ,MCT_L2_IRQ ,MCT_L3_IRQ , +MCT_L4_IRQ , +MCT_L5_IRQ , +MCT_L6_IRQ , +MCT_L7_IRQ , MCT_NR_IRQS, };
Signature · 1 line
1.7.9.5
PATCH v3 2/2 arm: dt: Exynos5420: populate cpu node enteries to 8 cpus
In reply to Chander KashyapExynos5420 is octacore SoC from samsung.
Hence populate all the cpu node enteries.
--- arch/arm/boot/dts/exynos5420.dtsi | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
arch/arm/boot/dts/exynos5420.dtsi +28 -0
@@ -57,6 +57,34 @@ reg = <0x3>; clock-frequency = <1800000000>; }; + + cpu4: cpu at 100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clock-frequency = <1000000000>; + }; + + cpu5: cpu at 101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <1000000000>; + }; + + cpu6: cpu at 102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <1000000000>; + }; + + cpu7: cpu at 103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <1000000000>; + }; }; clock: clock-controller at 0x10010000 {
Signature · 1 line
1.7.9.5
PATCH v3 2/2 arm: dt: Exynos5420: populate cpu node enteries to 8 cpus
Quoted 1 line · Chander Kashyap
Exynos5420 is octacore SoC from samsung.
s/octacore/octa-core ?
s/samsung/Samsung
Quoted 1 line
Hence populate all the cpu node enteries.
s/cpu/CPU ?
s/enteries/entries
Quoted 1 line
Signed-off-by Chander Kashyap<[email protected]>
Subjects of the dts patches normally start with "ARM: dts:".
I guess this all could be corrected while the patch is being applied to the platform maitainter's tree.
--
Thanks,
Sylwester
PATCH v3 2/2 arm: dt: Exynos5420: populate cpu node enteries to 8 cpus
Hi Kukgin,
Quoted 15 lines · Sylwester Nawrocki
Quoted 2 lines · Chander Kashyap
Exynos5420 is octacore SoC from samsung.
s/octacore/octa-core ?
s/samsung/SamsungQuoted 1 line
Hence populate all the cpu node enteries.
s/cpu/CPU ?
s/enteries/entries
Quoted 7 lines
Quoted 1 line
Signed-off-by Chander Kashyap<[email protected]>Subjects of the dts patches normally start with "ARM: dts:".
I guess this all could be corrected while the patch is being applied to the platform maitainter's tree.
Shall i send a version or you will take these.
Quoted 4 lines
--
Thanks,
Sylwester
Signature · 2 lines
with warm regards, Chander Kashyap
PATCH v3 2/2 arm: dt: Exynos5420: populate cpu node enteries to 8 cpus
Quoted 23 lines · Chander Kashyap
Hi Kukgin,
Quoted 18 lines · Sylwester Nawrocki
Quoted 2 lines · Chander Kashyap
Exynos5420 is octacore SoC from samsung.
s/octacore/octa-core ?
s/samsung/SamsungQuoted 1 line
Hence populate all the cpu node enteries.
s/cpu/CPU ?
s/enteries/entriesQuoted 1 line
Signed-off-by Chander Kashyap<[email protected]>
Quoted 7 lines
Quoted 4 lines
Subjects of the dts patches normally start with "ARM: dts:".
I guess this all could be corrected while the patch is being applied to the platform maitainter's tree.
Shall i send a version or you will take these.
Please re-send :-)
Thanks,
Kukjin
v3 cover Enable all cpus in Exynos5420
In reply to Chander KashyapQuoted 10 lines · Chander Kashyap
Exynos5420 is an octacore SoC. This patch series enables the remaining 4 cores.
Changes in v2:
- Changed the cpu node @unit-address value to reg property value.
Changes in v3:
- Removed leading 0x from @unit-address value.Chander Kashyap (2):
clocksource: mct: extend mct to support 8 local interrupts forExynos5420
Quoted 9 lines
arm: dt: Exynos5420: populate cpu node enteries to 8 cpus
arch/arm/boot/dts/exynos5420.dtsi | 37 +++++++++++++++++++++++++++++++++++-- drivers/clocksource/exynos_mct.c | 4 ++++ 2 files changed, 39 insertions(+), 2 deletions(-)--
1.7.9.5
Hi Kukjin, can you please take these patches.
Signature · 2 lines
with warm regards, Chander Kashyap