Skip to contentSkip to conversation

powerpc/mpc85xx: Fix the I2C bus speed error on p1022

PATCH New Yuantian.Tang at freescale.com 2 participants 2 messages Sep 6, 2013 – Sep 9, 2013 PowerPC

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 powerpc/mpc85xx: Fix the I2C bus speed error on p1022

From: Tang Yuantian <[email protected]>

The source clock frequency of I2C bus on p1022 is the platform(CCB) clock, not CCB/2. The wrong source clock frequency leads to wrong I2C bus speed setting. so, fixed it.

---
fix bug: ENGR00274019

 arch/powerpc/cpu/mpc85xx/speed.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
arch/powerpc/cpu/mpc85xx/speed.c +2 -1
index 65cc7c0..75c92cc 100644
@@ -415,7 +415,8 @@ int get_clocks (void)
 	 * AN2919.
 	 */
 #if defined(CONFIG_MPC8540) || defined(CONFIG_MPC8541) || \
-	defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555)
+	defined(CONFIG_MPC8560) || defined(CONFIG_MPC8555) || \
+	defined(CONFIG_P1022)
 	gd->arch.i2c1_clk = sys_info.freq_systembus;
 #elif defined(CONFIG_MPC8544)
 	/*
Signature · 1 line
1.8.0
#1 lore raw

PATCH 1/1 powerpc/mpc85xx: Fix the I2C bus speed error on p1022

Hello Yuantian.Tang at freescale.com,

Am 06.09.2013 04:45, schrieb Yuantian.Tang at freescale.com:

Quoted 6 lines

From: Tang Yuantian<[email protected]>

The source clock frequency of I2C bus on p1022 is the platform(CCB) clock, not CCB/2. The wrong source clock frequency leads to wrong I2C bus speed setting. so, fixed it.

Quoted 6 lines

---
fix bug: ENGR00274019

  arch/powerpc/cpu/mpc85xx/speed.c | 3 ++-
  1 file changed, 2 insertions(+), 1 deletion(-)

Applied to u-boot-i2c.git

Thanks!

bye,
Heiko

Signature · 2 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany