powerpc/p2041: fix I2C controller's offset
PATCH 1/1 powerpc/p2041: fix I2C controller's offset
Without this patch, SPD access will fail which leads to DDR init fail.
--- include/configs/P2041RDB.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
include/configs/P2041RDB.h +2 -2
@@ -354,10 +354,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_I2C_FSL #define CONFIG_SYS_FSL_I2C_SPEED 400000#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000#define CONFIG_SYS_FSL_I2C2_SPEED 400000#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100/* * RapidIO
Signature · 1 line
1.7.0.4
PATCH 1/1 powerpc/p2041: fix I2C controller's offset
Hi Xie,
Quoted 25 lines · Shaohui Xie
Without this patch, SPD access will fail which leads to DDR init fail.
Signed-off-by Shaohui Xie <[email protected]>--- include/configs/P2041RDB.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)include/configs/P2041RDB.h +2
-3@@ -354,10 +354,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_I2C_FSL #define CONFIG_SYS_FSL_I2C_SPEED 400000#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000#define CONFIG_SYS_FSL_I2C2_SPEED 400000#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100/* * RapidIO --
Quoted 2 lines
1.7.0.4
Yes that appears to fix the problem. Thanks for the quick turn around.
PATCH 1/1 powerpc/p2041: fix I2C controller's offset
Quoted 33 lines · Chris Packham
Hi Xie,
Quoted 25 lines · Shaohui Xie
Without this patch, SPD access will fail which leads to DDR init fail.
Signed-off-by Shaohui Xie <[email protected]>--- include/configs/P2041RDB.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)include/configs/P2041RDB.h +2
-3@@ -354,10 +354,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_I2C_FSL #define CONFIG_SYS_FSL_I2C_SPEED 400000#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000#define CONFIG_SYS_FSL_I2C2_SPEED 400000#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100/* * RapidIO -- Quoted 2 lines
1.7.0.4
Yes that appears to fix the problem. Thanks for the quick turn around.
Quoted 2 lines
Tested-by Chris Packham <[email protected]>
Thanks for the feedback. I will take it in u-boot-mpc85xx.
York
PATCH 1/1 powerpc/p2041: fix I2C controller's offset
Hello York,
Am 10.09.2013 23:14, schrieb York Sun:
Quoted 10 lines · Chris Packham
Quoted 9 lines
Hi Xie,
Quoted 6 lines · Shaohui Xie
Without this patch, SPD access will fail which leads to DDR init fail.
Signed-off-by Shaohui Xie<[email protected]>--- include/configs/P2041RDB.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
Thanks for this fix!
Quoted 23 lines
Quoted 23 lines
Quoted 18 lines
include/configs/P2041RDB.h +2
-3@@ -354,10 +354,10 @@ unsigned long get_board_sys_clk(unsigned long dummy);#define CONFIG_SYS_I2C_FSL #define CONFIG_SYS_FSL_I2C_SPEED 400000#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000#define CONFIG_SYS_FSL_I2C2_SPEED 400000#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100/* * RapidIO -- Quoted 2 lines
1.7.0.4
Yes that appears to fix the problem. Thanks for the quick turn around.
Quoted 1 line
Quoted 1 line
Tested-by Chris Packham<[email protected]>
Thanks for testing.
Quoted 1 line
Thanks for the feedback. I will take it in u-boot-mpc85xx.
Ah, Ok, I am fine with this, so:
bye,
Heiko
Signature · 2 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany