Skip to contentSkip to conversation

Trying to install some cpan modules - dumper.so wrong ELF class???

DISCUSSION JC 2 participants 4 messages Sep 14, 2013 – Sep 27, 2013

lore
Share & tools
lore

JC

author
#0 lore raw

Hi,

I need a few CPAN modules. For most of them I had no issue with a common recipe, but I end up with issues on Net::SDP

here's my recipe :
SUMMARY = "Collection of Perl modules for working with shairport."
SECTION = "libs"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"

SRC_URI = "http://www.cpan.org/modules/by-module/Net/${BPN}-${PV}.tar.gz "

SRC_URI[md5sum] = "bb70cb8ebb7ca57c20ac134ac4499e66"
SRC_URI[sha256sum] = "f43fa0f8f9705ae66a4084d13691c2ad7724b381424d368404c3d825bc5782f0"

require cpan.inc

and cpan.inc is :
S= "${WORKDIR}/${BPN}-${PV}"

inherit cpan

do_compile() {
    export LIBC="$(find ${STAGING_DIR_TARGET}/${base_libdir}/ -name 

'libc-*.so')"
cpan_do_compile
}

Here's the error message:

Can't load '/media/yocto/var_yocto/var_yocto/rpi-build/tmp/sysroots/qemuarm/usr/lib/perl/5.14.3/auto/Data/Dumper/Dumper.so' for module Data::Dumper: /media/yocto/var_yocto/var_yocto/rpi-build/tmp/sysroots/qemuarm/usr/lib/perl/5.14.3/auto/Data/Dumper/Dumper.so: wrong ELF class: ELFCLASS32 at /media/yocto/var_yocto/var_yocto/rpi-build/tmp/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.3/XSLoader.pm li

Does it ring a bell to anyone ???

Regards
Jay

#1 lore raw

Hi Yoctoers,

Anyone got any idea about this previous mail ?

Quoted 26 lines · JC

I need a few CPAN modules. For most of them I had no issue with a common recipe, but I end up with issues on Net::SDP

here's my recipe :
SUMMARY = "Collection of Perl modules for working with shairport."
SECTION = "libs"
LICENSE = "MIT"
LIC_FILES_CHKSUM = "file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"

SRC_URI = "http://www.cpan.org/modules/by-module/Net/${BPN}-${PV}.tar.gz "

SRC_URI[md5sum] = "bb70cb8ebb7ca57c20ac134ac4499e66"
SRC_URI[sha256sum] = "f43fa0f8f9705ae66a4084d13691c2ad7724b381424d368404c3d825bc5782f0"

require cpan.inc

and cpan.inc is :
S= "${WORKDIR}/${BPN}-${PV}"

inherit cpan

do_compile() {
   export LIBC="$(find ${STAGING_DIR_TARGET}/${base_libdir}/ -name 'libc-*.so')"
   cpan_do_compile
}
Quoted 7 lines

Here's the error message:

Can't load '/media/yocto/var_yocto/var_yocto/rpi-build/tmp/sysroots/qemuarm/usr/lib/perl/5.14.3/auto/Data/Dumper/Dumper.so' for module Data::Dumper: /media/yocto/var_yocto/var_yocto/rpi-build/tmp/sysroots/qemuarm/usr/lib/perl/5.14.3/auto/Data/Dumper/Dumper.so: wrong ELF class: ELFCLASS32 at /media/yocto/var_yocto/var_yocto/rpi-build/tmp/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.3/XSLoader.pm li

Does it ring a bell to anyone ???

I'd be willing to fix it, but I simply have no clue where to start :(

Regards
Jay

#2 lore raw
Quoted 1 line · Jean-Charles JC Verdié
Quoted 1 line

Can't load '/media/yocto/var_yocto/var_yocto/rpi-build/tmp/sysroots/qemuarm/usr/lib/perl/5.14.3/auto/Data/Dumper/Dumper.so' for module Data::Dumper: /media/yocto/var_yocto/var_yocto/rpi-build/tmp/sysroots/qemuarm/usr/lib/perl/5.14.3/auto/Data/Dumper/Dumper.so: wrong ELF class: ELFCLASS32 at /media/yocto/var_yocto/var_yocto/rpi-build/tmp/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.3/XSLoader.pm li

this is reaching out to native-perl mods there. seems its not cross compiler friendly
look out for variables that are being used to construct path for XSLoader.pm and use
the correct target paths

author
#3 lore raw
Quoted 7 lines · Khem Raj
Quoted 1 line · Jean-Charles JC Verdié
Quoted 1 line

Can't load '/media/yocto/var_yocto/var_yocto/rpi-build/tmp/sysroots/qemuarm/usr/lib/perl/5.14.3/auto/Data/Dumper/Dumper.so' for module Data::Dumper: /media/yocto/var_yocto/var_yocto/rpi-build/tmp/sysroots/qemuarm/usr/lib/perl/5.14.3/auto/Data/Dumper/Dumper.so: wrong ELF class: ELFCLASS32 at /media/yocto/var_yocto/var_yocto/rpi-build/tmp/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.3/XSLoader.pm li

this is reaching out to native-perl mods there. seems its not cross compiler friendly
look out for variables that are being used to construct path for XSLoader.pm and use
the correct target paths

Actually, it seems that this package does not provide the regular .PL file expected by cpan.
I found out a way to generate it, and I could compile. But as you can see it uses perl native (I get an x86-64 build), and it's trying to install on my / directory instead of the rootfs:

ERROR: Logfile of failure stored in: /media/yocto/yocto/rpi/tmp/work/armv6-vfp-poky-linux-gnueabi/Net-SDP/0.07-r0/temp/log.do_install.30179 Log data follows:

| DEBUG: Executing shell function do_install
| Building Net-SDP
| WARNING: Can't figure out install path for types: bindoc libdoc
| Files will not be installed.
| !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
| ERROR: Can't create '/usr/lib/perl/site_perl/5.14.3/Net'
| mkdir /usr/lib/perl/site_perl: Permission denied at /media/yocto/yocto/rpi/tmp/sysroots/x86_64-linux/usr/lib/perl-native/perl//5.14.3/ExtUtils/Install.pm line 494
|
| !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
|  at /media/yocto/yocto/rpi/tmp/sysroots/x86_64-linux/usr/lib/perl-native/perl/5.14.3/Module/Build/Base.pm line 3569

FWIW, I can do the manual operations in qemu so it's really a matter of using target perl instead of hosted perl I think :(

I'm investigating a little bit more or I will post additional information for help :)

Thanks anyway,
Regards
Jay