ARM: tegra: add fuses as device randomness
Subsystems (3)
PATCH 1/1 ARM: tegra: add fuses as device randomness
From: Stephen Warren <[email protected]>
Various fuses on Tegra include information that's unique to an individual chip, or a subset of chips. Call add_device_randomness() with this data to perturb the initial state of the random pool.
--- arch/arm/mach-tegra/fuse.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 54 insertions(+)
arch/arm/mach-tegra/fuse.c +54 -0
@@ -21,14 +21,26 @@#include <linux/kernel.h> #include <linux/io.h> #include <linux/export.h> +#include <linux/random.h> #include <linux/tegra-soc.h> #include "fuse.h" #include "iomap.h" #include "apbio.h" +/* Tegra20 only */ #define FUSE_UID_LOW 0x108#define FUSE_UID_HIGH 0x10c + +/* Tegra30 and later */ +#define FUSE_VENDOR_CODE 0x200 +#define FUSE_FAB_CODE 0x204 +#define FUSE_LOT_CODE_0 0x208 +#define FUSE_LOT_CODE_1 0x20c +#define FUSE_WAFER_ID 0x210 +#define FUSE_X_COORDINATE 0x214 +#define FUSE_Y_COORDINATE 0x218 +#define FUSE_SKU_INFO 0x110#define TEGRA20_FUSE_SPARE_BIT 0x200
@@ -112,21 +124,51 @@ u32 tegra_read_chipid(void)return readl_relaxed (IO_ADDRESS (TEGRA_APB_MISC_BASE ) +0x804 ); } +static void __init tegra20_fuse_init_randomness (void ) +{ +u32 randomness[2 ]; + + randomness[0 ] =tegra_fuse_readl (FUSE_UID_LOW ); + randomness[1 ] =tegra_fuse_readl (FUSE_UID_HIGH ); + +add_device_randomness (randomness,sizeof (randomness)); +} + +/* Applies to Tegra30 or later */ +static void __init tegra30_fuse_init_randomness (void ) +{ +u32 randomness[7 ]; + + randomness[0 ] =tegra_fuse_readl (FUSE_VENDOR_CODE ); + randomness[1 ] =tegra_fuse_readl (FUSE_FAB_CODE ); + randomness[2 ] =tegra_fuse_readl (FUSE_LOT_CODE_0 ); + randomness[3 ] =tegra_fuse_readl (FUSE_LOT_CODE_1 ); + randomness[4 ] =tegra_fuse_readl (FUSE_WAFER_ID ); + randomness[5 ] =tegra_fuse_readl (FUSE_X_COORDINATE ); + randomness[6 ] =tegra_fuse_readl (FUSE_Y_COORDINATE ); + +add_device_randomness (randomness,sizeof (randomness)); +} +void __init tegra_init_fuse (void ) {u32 id; +u32 randomness[5 ];u32 reg =readl (IO_ADDRESS (TEGRA_CLK_RESET_BASE +0x48 )); reg |=1 <<28 ;writel (reg,IO_ADDRESS (TEGRA_CLK_RESET_BASE +0x48 )); reg =tegra_fuse_readl (FUSE_SKU_INFO ); + randomness[0 ] = reg; tegra_sku_id = reg &0xFF ; reg =tegra_apb_readl (TEGRA_APB_MISC_BASE +STRAP_OPT ); + randomness[1 ] = reg; tegra_bct_strapping = (reg &RAM_ID_MASK ) >>RAM_CODE_SHIFT ; id =tegra_read_chipid (); + randomness[2 ] = id; tegra_chip_id = (id >>8 ) &0xff ;switch (tegra_chip_id) {
@@ -149,6 +191,18 @@ void __init tegra_init_fuse(void) tegra_revision =tegra_get_revision (id);tegra_init_speedo_data (); + randomness[3 ] = (tegra_cpu_process_id <<16 ) | tegra_core_process_id; + randomness[4 ] = (tegra_cpu_speedo_id <<16 ) | tegra_soc_speedo_id; + +add_device_randomness (randomness,sizeof (randomness)); +switch (tegra_chip_id) { +case TEGRA20 : +tegra20_fuse_init_randomness (); +case TEGRA30 : +case TEGRA114 : +default : +tegra30_fuse_init_randomness (); + } pr_info("Tegra Revision: %s SKU: %d CPU Process: %d Core Process: %d\n", tegra_revision_name[tegra_revision],
Signature · 1 line
1.8.1.5
PATCH 1/1 ARM: tegra: add fuses as device randomness
Quoted 8 lines · Stephen Warren
From: Stephen Warren <[email protected]>
Various fuses on Tegra include information that's unique to an individual chip, or a subset of chips. Call
add_device_randomness()with this data to perturb the initial state of the random pool.Suggested-by Linus Walleij <[email protected]>Signed-off-by Stephen Warren <[email protected]>
Nice! Acked-by FWIW.
Yours,
Linus Walleij
Stephen Warren
AppliedPATCH 1/1 ARM: tegra: add fuses as device randomness
In reply to Stephen WarrenQuoted 5 lines · Stephen Warren
From: Stephen Warren <[email protected]>
Various fuses on Tegra include information that's unique to an individual chip, or a subset of chips. Call
add_device_randomness()with this data to perturb the initial state of the random pool.
I have applied this patch to Tegra's for-3.13/soc branch.