Skip to contentSkip to conversation

arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot

PATCH Superseded Jens Scharsig (BuS Elektronik) 3 participants 3 messages Sep 18, 2013

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot

From: "Jens Scharsig (BuS Elektronik)" <[email protected]>

Since UBIFS is enabled for cpux9k2, more malloc space is needed. For the current uboot 2013.10-rcX the size is to small, this will fix the startup problems by increasing the mallog space.

---
 include/configs/eb_cpux9k2.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/eb_cpux9k2.h +1 -1
index ccc7bd0..7aca74b 100644
@@ -83,7 +83,7 @@
  * Size of malloc() pool
  */
 
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 520*1024)
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)
 
 /*
  * sdram
Signature · 1 line
1.8.1.4
#1 lore raw

PATCH 1/1 arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot

Dear Jens Scharsig,

Quoted 16 lines · Jens Scharsig (BuS Elektronik)

From: "Jens Scharsig (BuS Elektronik)" <[email protected]>

Since UBIFS is enabled for cpux9k2, more malloc space is needed. For the current uboot 2013.10-rcX the size is to small, this will fix the startup problems by increasing the mallog space.

---
 include/configs/eb_cpux9k2.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/configs/eb_cpux9k2.h +0 -0
index ccc7bd0..7aca74b 100644

include/configs/eb_cpux9k2.h line 86

Quoted 5 lines
include/configs/eb_cpux9k2.h +1 -1
@@ -83,7 +83,7 @@
  * Size of malloc() pool
  */
 
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 520*1024)
+#define CONFIG_SYS_MALLOC_LEN		(1024 * 1024)

are you sure 1MiB is enough? We had from time to time problems initializing an unsafe closed UBI (about 512MiB). With 4MiB malloc arena however we never had these problems.

Best regards

Andreas Bie?mann

#2 lore raw

PATCH 1/1 arm: atmel: cpux9k2: increase malloc space to fix crash on start u-boot

Dear Andreas Bie?mann:

Quoted 4 lines

are you sure 1MiB is enough? We had from time to time problems initializing an unsafe closed UBI (about 512MiB). With 4MiB malloc arena however we never had these problems.

Thank you for informations. To prevent future problems, I will send a 4MiB version (V2) tomorrow.

Regards

Jens