Skip to contentSkip to conversation

dual port onboard 82546EB checksum errors

it really is text/plain :P David Ford 2 participants 2 messages Apr 19, 2007

lore
Share & tools
lore

David Ford

author
#0 lore raw

I have a rackmount server that has a dual port onboard 82546EB card.

I've googled and seen this card apparently active with other users but I seem to only get checksum errors.

[    0.194129] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[    0.194234] Copyright (c) 1999-2006 Intel Corporation.
[    0.194405] ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 51 (level,
low) -> IRQ 16
[    0.458732] e1000: 0000:04:09.0: e1000_probe: (PCI:66MHz:64-bit)
00:04:23:cd:93:d2
[    0.489766] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[    0.489889] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 30 (level,
low) -> IRQ 17
[    0.721071] e1000: 0000:03:07.0: e1000_probe: The EEPROM Checksum
Is Not Valid
[    0.742509] ACPI: PCI interrupt for device 0000:03:07.0 disabled
[    0.742614] e1000: probe of 0000:03:07.0 failed with error -5
[    0.742731] ACPI: PCI Interrupt 0000:03:07.1[B] -> GSI 31 (level,
low) -> IRQ 18
[    0.973865] e1000: 0000:03:07.1: e1000_probe: The EEPROM Checksum
Is Not Valid
[    0.995304] ACPI: PCI interrupt for device 0000:03:07.1 disabled
[    0.995405] e1000: probe of 0000:03:07.1 failed with error -5

03:07.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 01)
03:07.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 01)
04: 09.0 Ethernet controller: Intel Corporation 82545GM Gigabit Ethernet Controller (rev 04)

03:07.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 01)
Subsystem: Intel Corporation Unknown device 341a
Flags: 66MHz, medium devsel, IRQ 17
Memory at fe5c0000 (64-bit, non-prefetchable) [size=128K] I/O ports at 2040 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-

03:07.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 01)
Subsystem: Intel Corporation Unknown device 341a
Flags: 66MHz, medium devsel, IRQ 18
Memory at fe5e0000 (64-bit, non-prefetchable) [size=128K] I/O ports at 2000 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-

04:09.0 Ethernet controller: Intel Corporation 82545GM Gigabit Ethernet Controller (rev 04)
Subsystem: Intel Corporation PRO/1000 MT Server Adapter
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at fe8c0000 (64-bit, non-prefetchable) [size=128K] Memory at fe880000 (64-bit, non-prefetchable) [size=256K] I/O ports at 3000 [size=64]
Expansion ROM at fe840000 [disabled] [size=256K]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device

The 82545GM card comes up fine but the 46EB card does not.

This is 2.6.20-gentoo-r6

I'll be happy to fulfill information request if needed. Any suggestions that'd help me get the 46EB working?

Thank you,
David

#1 lore raw

please copy netdev, or better yet [email protected] in the future for e1000 issues like this. Feel free to move the conversation there, if you would like.

Quoted 71 lines · David Ford

I have a rackmount server that has a dual port onboard 82546EB card.

I've googled and seen this card apparently active with other users but I seem to only get checksum errors.

[    0.194129] Intel(R) PRO/1000 Network Driver - version 7.3.15-k2-NAPI
[    0.194234] Copyright (c) 1999-2006 Intel Corporation.
[    0.194405] ACPI: PCI Interrupt 0000:04:09.0[A] -> GSI 51 (level,
low) -> IRQ 16
[    0.458732] e1000: 0000:04:09.0: e1000_probe: (PCI:66MHz:64-bit)
00:04:23:cd:93:d2
[    0.489766] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[    0.489889] ACPI: PCI Interrupt 0000:03:07.0[A] -> GSI 30 (level,
low) -> IRQ 17
[    0.721071] e1000: 0000:03:07.0: e1000_probe: The EEPROM Checksum
Is Not Valid
[    0.742509] ACPI: PCI interrupt for device 0000:03:07.0 disabled
[    0.742614] e1000: probe of 0000:03:07.0 failed with error -5
[    0.742731] ACPI: PCI Interrupt 0000:03:07.1[B] -> GSI 31 (level,
low) -> IRQ 18
[    0.973865] e1000: 0000:03:07.1: e1000_probe: The EEPROM Checksum
Is Not Valid
[    0.995304] ACPI: PCI interrupt for device 0000:03:07.1 disabled
[    0.995405] e1000: probe of 0000:03:07.1 failed with error -5

03:07.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 01)
03:07.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 01)
04: 09.0 Ethernet controller: Intel Corporation 82545GM Gigabit Ethernet Controller (rev 04)

03:07.0 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 01)
Subsystem: Intel Corporation Unknown device 341a
Flags: 66MHz, medium devsel, IRQ 17
Memory at fe5c0000 (64-bit, non-prefetchable) [size=128K] I/O ports at 2040 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-

03:07.1 Ethernet controller: Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) (rev 01)
Subsystem: Intel Corporation Unknown device 341a
Flags: 66MHz, medium devsel, IRQ 18
Memory at fe5e0000 (64-bit, non-prefetchable) [size=128K] I/O ports at 2000 [size=64]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-

04:09.0 Ethernet controller: Intel Corporation 82545GM Gigabit Ethernet Controller (rev 04)
Subsystem: Intel Corporation PRO/1000 MT Server Adapter
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at fe8c0000 (64-bit, non-prefetchable) [size=128K] Memory at fe880000 (64-bit, non-prefetchable) [size=256K] I/O ports at 3000 [size=64]
Expansion ROM at fe840000 [disabled] [size=256K]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device

Quoted 6 lines

The 82545GM card comes up fine but the 46EB card does not.

This is 2.6.20-gentoo-r6

I'll be happy to fulfill information request if needed. Any suggestions that'd help me get the 46EB working?

We haven't heard of any reports about this, can you get us some more information about the platform this is in?
lspci -vv
dmesg (full version)
you can comment out the eeprom check and mac address check, rebuild the driver and load it, then run
ethtool -e ethX
on the ports that are failing, without bringing the interface 'up'

you may have a hardware failure, or you could be having bus issues. The eeprom read is the first point that we try to read a register from the adapter so if register reads are failing this is the symptom you will see.