Skip to contentSkip to conversation

Add support for Newflow NanoBone board

PATCH Superseded Mark Jackson 1 participant 2 messages Sep 25, 2013 – Oct 4, 2013

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 Add support for Newflow NanoBone board

NanoBone Specification:
-----------------------
CPU:
TI AM335x

Memory:
256MB DDR3
128MB NOR flash
128KB FRAM

Ethernet:
2 x 10/100 connected to SMSC LAN8710 PHY

USB:
1 x USB2.0 Type A

I2C:
2Kbit EEPROM (Microchip 24AA02)
RTC (Maxim DS1338)
GPIO Expander (Microchip MCP23017)

Expansion connector:
6 x UART
1 x MMC/SD
1 x USB2.0

---
Changes in v3:
- Added MMC support
- Fixed regulator limits

Changes in v2:
- Reworked to use existing device nodes as suggested by Javier

 MAINTAINERS                       |    6 +
 arch/arm/boot/dts/Makefile        |    1 +
 arch/arm/boot/dts/am335x-nano.dts |  431 +++++++++++++++++++++++++++++++++++++
 3 files changed, 438 insertions(+)
 create mode 100644 arch/arm/boot/dts/am335x-nano.dts
MAINTAINERS +6 -0
index e61c2e8..8a4c9d9 100644
@@ -6062,6 +6062,12 @@ L:	linux-omap at vger.kernel.org
 S:	Maintained
 F:	drivers/gpio/gpio-omap.c
 
+OMAP/NEWFLOW NANOBONE MACHINE SUPPORT
+M:	Mark Jackson <[email protected]>
+L:	linux-omap at vger.kernel.org
+S:	Maintained
+F:	arch/arm/boot/dts/am335x-nano.dts
+
 OMFS FILESYSTEM
 M:	Bob Copeland <[email protected]>
 L:	linux-karma-devel at lists.sourceforge.net
arch/arm/boot/dts/Makefile +1 -0
index e95af3f..543e837 100644
@@ -184,6 +184,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	am335x-evmsk.dtb \
 	am335x-bone.dtb \
 	am335x-boneblack.dtb \
+	am335x-nano.dtb \
 	am3517-evm.dtb \
 	am3517_mt_ventoux.dtb \
 	am43x-epos-evm.dtb
arch/arm/boot/dts/am335x-nano.dts new file +431 -0

431 lines not on this page · raw message

Signature · 1 line
1.7.9.5
#1 lore raw
Quoted 21 lines · Mark Jackson

NanoBone Specification:
-----------------------
CPU:
TI AM335x

Memory:
256MB DDR3
128MB NOR flash
128KB FRAM

Ethernet:
2 x 10/100 connected to SMSC LAN8710 PHY

USB:
1 x USB2.0 Type A

I2C:
2Kbit EEPROM (Microchip 24AA02)
RTC (Maxim DS1338)
GPIO Expander (Microchip MCP23017)

Quoted 7 lines

Expansion connector:
6 x UART
1 x MMC/SD
1 x USB2.0

<snip>

Any chance someone could accept / comment on this patch ?

Cheers
Mark J.