jq: new package
PATCH 1/1 jq: new package
jq is like sed for JSON data - you can use it to slice and filter and map and transform structured data with the same ease that sed, awk, grep and friends let you play with text.
---
The package description is as per the author - not my words.
--- package/Config.in | 1 + package/jq/Config.in | 8 ++++++++ package/jq/jq.mk | 13 +++++++++++++ 3 files changed, 22 insertions(+) create mode 100644 package/jq/Config.in create mode 100644 package/jq/jq.mk
package/Config.in +1 -0
@@ -108,6 +108,7 @@ if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS source "package/grep/Config.in" endif source "package/intltool/Config.in" +source "package/jq/Config.in" source "package/make/Config.in" source "package/libtool/Config.in" source "package/m4/Config.in"
package/jq/Config.in new file +8 -0
@@ -0,0 +1,8 @@ +config BR2_PACKAGE_JQ + bool "jq" + help + jq is like sed for JSON data - you can use it to slice and filter + and map and transform structured data with the same ease that sed, + awk, grep and friends let you play with text. + + http://stedolan.github.io/jq/
package/jq/jq.mk new file +13 -0
@@ -0,0 +1,13 @@ +################################################################################ +# +# jq +# +################################################################################ + +JQ_VERSION = 1.3 +JQ_SITE = http://github.com/stedolan/jq/archive +JQ_AUTORECONF = YES +JQ_LICENSE = jq license +JQ_LICENSE_FILES = COPYING + +$(eval $(autotools-package))
Signature · 1 line
1.7.9.5
PATCH 1/1 jq: new package
Quoted 49 lines · Danomi Manchego
jq is like sed for JSON data - you can use it to slice and filter and map and transform structured data with the same ease that sed, awk, grep and friends let you play with text.
Signed-off-by Danomi Manchego <[email protected]>---
The package description is as per the author - not my words.
---package/Config.in | 1 + package/jq/Config.in | 8 ++++++++ package/jq/jq.mk | 13 +++++++++++++ 3 files changed, 22 insertions(+)create mode 100644 package/jq/Config.in
create mode 100644package/jq/jq.mkpackage/Config.in +0
-0@@ -108,6 +108,7 @@ if BR2_PACKAGE_BUSYBOX_SHOW_OTHERSsource "package/grep/Config.in"
endif
source "package/intltool/Config.in"
+source "package/jq/Config.in"
source "package/make/Config.in"
source "package/libtool/Config.in"
source "package/m4/Config.in"package/jq/Config.in new file +8
-0@@ -0,0 +1,8 @@ +config BR2_PACKAGE_JQ + bool "jq" + help + jq is like sed for JSON data - you can use it to slice and filter + and map and transform structured data with the same ease that sed, + awk, grep and friends let you play with text. + + http://stedolan.github.io/jq/package/jq/jq.mk new file +0
-0
package/jq/jq.mk line 8
Quoted 8 lines
package/jq/jq.mk new file +8
-0@@ -0,0 +1,13 @@ +################################################################################ +# +# jq +# +################################################################################ + +JQ_VERSION = 1.3 +JQ_SITE = http://github.com/stedolan/jq/archive
The buildroot manual talks about a slightly different url for github packages. It's there a specific reason you're not using that one?
package/jq/jq.mk line 13
Quoted 5 lines
package/jq/jq.mk new file +5
-0+JQ_AUTORECONF = YES +JQ_LICENSE = jq license +JQ_LICENSE_FILES = COPYING + +$(eval $(autotools-package))
Are there no dependencies?
No need for threads, c++, or any of that?
Best regards,
Thomas
PATCH 1/1 jq: new package
Hi Thomas,
Quoted 52 lines · Thomas De Schampheleire
Quoted 51 lines · Danomi Manchego
jq is like sed for JSON data - you can use it to slice and filter and map and transform structured data with the same ease that sed, awk, grep and friends let you play with text.
Signed-off-by Danomi Manchego <[email protected]>---
The package description is as per the author - not my words.
---package/Config.in | 1 + package/jq/Config.in | 8 ++++++++ package/jq/jq.mk | 13 +++++++++++++ 3 files changed, 22 insertions(+)create mode 100644 package/jq/Config.in
create mode 100644package/jq/jq.mkpackage/Config.in +0
-0@@ -108,6 +108,7 @@ if BR2_PACKAGE_BUSYBOX_SHOW_OTHERSsource "package/grep/Config.in"
endif
source "package/intltool/Config.in"
+source "package/jq/Config.in"
source "package/make/Config.in"
source "package/libtool/Config.in"
source "package/m4/Config.in"package/jq/Config.in new file +8
-0@@ -0,0 +1,8 @@ +config BR2_PACKAGE_JQ + bool "jq" + help + jq is like sed for JSON data - you can use it to slice and filter + and map and transform structured data with the same ease that sed, + awk, grep and friends let you play with text. + + http://stedolan.github.io/jq/package/jq/jq.mk new file +2
-0@@ -0,0 +1,13 @@ +################################################################################ +#
Quoted 8 lines
package/jq/jq.mk line 8
Quoted 6 lines
package/jq/jq.mk new file +6
-0+# jq +# +################################################################################ + +JQ_VERSION = 1.3 +JQ_SITE = http://github.com/stedolan/jq/archiveThe buildroot manual talks about a slightly different url for github packages. It's there a specific reason you're not using that one?
Yes, I saw the github documentation in the on-line documentation, so I tried this:
JQ_SITE = http://github.com/stedolan/jq/tarball/$(JQ_VERSION)
But it didn't work - after a github redirection or two, I got 404.
Quoted 8 lines
package/jq/jq.mk line 13
Quoted 5 lines
package/jq/jq.mk new file +5
-0+JQ_AUTORECONF = YES +JQ_LICENSE = jq license +JQ_LICENSE_FILES = COPYING + +$(eval $(autotools-package))Are there no dependencies?
No need for threads, c++, or any of that?
No, none that I can see - the source is all .c, and no pthread hits when I grep for "thread".
Do you use a particular defconfig to verify this?
Quoted 3 lines
Best regards,
Thomas
PATCH 1/1 jq: new package
Hi Danomi,
Quoted 53 lines
Hi Thomas,
Quoted 49 lines · Thomas De Schampheleire
Quoted 48 lines · Danomi Manchego
jq is like sed for JSON data - you can use it to slice and filter and map and transform structured data with the same ease that sed, awk, grep and friends let you play with text.
Signed-off-by Danomi Manchego <[email protected]>---
The package description is as per the author - not my words.
---package/Config.in | 1 + package/jq/Config.in | 8 ++++++++ package/jq/jq.mk | 13 +++++++++++++ 3 files changed, 22 insertions(+)create mode 100644 package/jq/Config.in
create mode 100644package/jq/jq.mkpackage/Config.in +0
-0@@ -108,6 +108,7 @@ if BR2_PACKAGE_BUSYBOX_SHOW_OTHERSsource "package/grep/Config.in"
endif
source "package/intltool/Config.in"
+source "package/jq/Config.in"
source "package/make/Config.in"
source "package/libtool/Config.in"
source "package/m4/Config.in"package/jq/Config.in new file +8
-0@@ -0,0 +1,8 @@ +config BR2_PACKAGE_JQ + bool "jq" + help + jq is like sed for JSON data - you can use it to slice and filter + and map and transform structured data with the same ease that sed, + awk, grep and friends let you play with text. + + http://stedolan.github.io/jq/package/jq/jq.mk new file +0
-0
Quoted 8 lines
Quoted 8 lines
package/jq/jq.mk line 7
Quoted 8 lines
package/jq/jq.mk new file +7
-0@@ -0,0 +1,13 @@ +################################################################################ +# +# jq +# +################################################################################ + +JQ_VERSION = 1.3
JQ_VERSION = jq-1.3
Regards,
Jerzy
Quoted 31 lines
Quoted 2 lines
package/jq/jq.mk line 8
Quoted 1 line
package/jq/jq.mk new file +1
-0+JQ_SITE = http://github.com/stedolan/jq/archiveThe buildroot manual talks about a slightly different url for github packages. It's there a specific reason you're not using that one?
Yes, I saw the github documentation in the on-line documentation, so I tried this:
JQ_SITE= http://github.com/stedolan/jq/tarball/$(JQ_VERSION)But it didn't work - after a github redirection or two, I got 404.
Quoted 7 lines
package/jq/jq.mk line 13
Quoted 5 lines
package/jq/jq.mk new file +5
-0+JQ_AUTORECONF = YES +JQ_LICENSE = jq license +JQ_LICENSE_FILES = COPYING + +$(eval $(autotools-package))Are there no dependencies?
No need for threads, c++, or any of that?No, none that I can see - the source is all .c, and no pthread hits when I grep for "thread".
Do you use a particular defconfig to verify this?
Quoted 3 lines
Best regards,
Thomas_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
PATCH 1/1 jq: new package
Jerzy,
Quoted 4 lines · Jerzy Grzegorek
Quoted 1 line
Quoted 1 line
Quoted 1 line
+JQ_VERSION = 1.3
JQ_VERSION= jq-1.3
Ah, you're right, specifying version as "jq-1.3" work with the github rule in the buildroot users manual. Though, then you get a tarball called "jq-jq-1.3.tar.gz", which seems odd.
Is it better to use the normal github site and get this strange name? That section of the manual says "Packages on github often don?t have a download area with release tarballs." But this package *does* have a download area, to get "jq-1.3.tar.gz" and older version. So I'm thinking that I can keep as is.
No?
Danomi -
PATCH 1/1 jq: new package
Hi,
Quoted 26 lines · Danomi Manchego
Jerzy,
Quoted 4 lines · Jerzy Grzegorek
Quoted 1 line
Quoted 1 line
Quoted 1 line
+JQ_VERSION = 1.3
JQ_VERSION= jq-1.3Ah, you're right, specifying version as "jq-1.3" work with the github rule in the buildroot users manual. Though, then you get a tarball called "jq-jq-1.3.tar.gz", which seems odd.
Is it better to use the normal github site and get this strange name? That section of the manual says "Packages on github often don?t have a download area with release tarballs." But this package *does* have a download area, to get "jq-1.3.tar.gz" and older version. So I'm thinking that I can keep as is.
No?
Danomi -
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
PATCH 1/1 jq: new package
In reply to Danomi ManchegoHi,
Quoted 4 lines · Danomi Manchego
Jerzy,
On Wed, Sep 25, 2013 at 10:14 AM, Jerzy Grzegorek
<[email protected]> wrote:
Quoted 8 lines
Quoted 4 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line
+JQ_VERSION = 1.3
JQ_VERSION= jq-1.3Ah, you're right, specifying version as "jq-1.3" work with the github rule in the buildroot users manual. Though, then you get a tarball called "jq-jq-1.3.tar.gz", which seems odd.
The fact is, you should actually use:
JQ_VERSION = 1.3JQ_SITE = http://github.com/stedolan/jq/tarball/jq-$(JQ_VERSION)
Quoted 7 lines
Is it better to use the normal github site and get this strange name? That section of the manual says "Packages on github often don?t have a download area with release tarballs." But this package *does* have a download area, to get "jq-1.3.tar.gz" and older version. So I'm thinking that I can keep as is.
Quoted 7 lines
No?
Danomi -
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
Cheers,
Lionel