: Please pull u-boot-imx
Hi Albert,
please pull from u-boot-imx, thanks !
The following changes since commit 8386ca8bea7a6a8469c3b6a99313afb642e6cbeb:
Revert "standalone-examples: support custom GCC lib" (2013-09-12
10:27:29 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-imx.git master
for you to fetch changes up to ce7a7f5e6bda35d7d0972be07b6983552d1a2cb2:
i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID (2013-09-27 13:53:35
+0200)
----------------------------------------------------------------
Andrew Gabbasov (1):
mx6: Fix calculation of emi_slow clock rate
Elie De Brauwer (1):
mxs_nand: Fix ECC strength for NAND flash with OOB size of 224
Eric Nelson (2):
i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10 i.MX6DQ/DLS: Add pad MX6_PAD_GPIO_1__USB_OTG_ID
Fabio Estevam (17):
mx6sabresd: Add LVDS splash screen support
wandboard: Use imx6dl-wandboard.dtb for the solo version
mx6sabresd: Avoid hang when HDMI cable is not connected
mx6sabresd: Reset counter to prevent error message
mmc: fsl_esdhc: Check the result from malloc()
mx35pdk: Remove CONFIG_SYS_CACHELINE_SIZE
mx6sabresd: Return error if cpu_eth_init() fails
mx6qsabreauto: Return error if cpu_eth_init() fails
net: fec_mxc: Add support for mx6 solo-lite
mx6slevk: Add Ethernet support
mx28evk: Fix checkpatch warning
doc: README.mxs: Add instruction to install 'libssl-dev'
mx6sabresd: Fix the fdt file for the mx6dl version
net: fec_mxc: Fix timeouts during tftp transfer
mx28evk: Propagate the error if cpu_eth_init() fails
mx28evk: Propagate the error if cpu_eth_init() fails
mx35pdk: Fix error handling in board_late_init()
Marek Vasut (6):
tools: mxsboot: Mark the FCB pages as valid
ARM: mxs: Sort the mx23evk and mx23_olinuxino
ARM: mxs: Document the power block initialization
ARM: mxs: Receive r0 and r1 passed from BootROM
ARM: mxs: Add Creative ZEN XFi3 board
ARM: mxs: Add SanDisk Sansa Fuze+ board
Markus Niebel (1):
ARM: arch-mx6: fix PLL2_PFD2_FREQ
Pierre Aubert (1):
mx6: Fix use of improper value in enable_ipu_clock
Robert Winkler (1):
imx: nitrogen6x/mx6qsabrelite: Fix bug in board_video_skip
Stefano Babic (1):
Merge branch 'master' of git://git.denx.de/u-boot-arm
York Sun (1):
tools/imximage.c: Fix compiling warning
trem (3):
mx27: add missing constant for mx27
apf27: add support for the armadeus APF27 board
apf27: add FPGA support for the apf27 board
arch/arm/cpu/arm926ejs/mx27/asm-offsets.c | 5 + arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 5 +- arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 209 +++++++++++ arch/arm/cpu/arm926ejs/mxs/start.S | 50 ++- arch/arm/cpu/armv7/mx6/clock.c | 40 +- arch/arm/include/asm/arch-mx27/imx-regs.h | 6 +- arch/arm/include/asm/arch-mx6/clock.h | 1 + arch/arm/include/asm/arch-mx6/crm_regs.h | 2 +- arch/arm/include/asm/arch-mx6/iomux.h | 5 + arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 6 +- arch/arm/include/asm/arch-mx6/mx6q_pins.h | 1 + arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 12 + arch/arm/include/asm/arch-mxs/sys_proto.h | 5 +- board/armadeus/apf27/Makefile | 33 ++ board/armadeus/apf27/apf27.c | 256 +++++++++++++ board/armadeus/apf27/apf27.h | 489 +++++++++++++++++++++++++ board/armadeus/apf27/fpga.c | 224 +++++++++++ board/armadeus/apf27/fpga.h | 25 ++ board/armadeus/apf27/lowlevel_init.S | 168 +++++++++ board/bluegiga/apx4devkit/spl_boot.c | 4 +- board/boundary/nitrogen6x/nitrogen6x.c | 4 +- board/creative/xfi3/Makefile | 31 ++ board/creative/xfi3/spl_boot.c | 134 +++++++ board/creative/xfi3/xfi3.c | 224 +++++++++++ board/denx/m28evk/m28evk.c | 2 + board/denx/m28evk/spl_boot.c | 4 +- board/freescale/mx23evk/spl_boot.c | 4 +- board/freescale/mx28evk/iomux.c | 4 +- board/freescale/mx28evk/mx28evk.c | 4 +- board/freescale/mx35pdk/mx35pdk.c | 10 +- board/freescale/mx6qsabreauto/mx6qsabreauto.c | 2 +- board/freescale/mx6sabresd/mx6sabresd.c | 169 +++++++-- board/freescale/mx6slevk/mx6slevk.c | 68 ++++ board/olimex/mx23_olinuxino/spl_boot.c | 4 +- board/sandisk/sansa_fuze_plus/Makefile | 31 ++ board/sandisk/sansa_fuze_plus/sfp.c | 388 ++++++++++++++++++++ board/sandisk/sansa_fuze_plus/spl_boot.c | 140 +++++++ board/schulercontrol/sc_sps_1/spl_boot.c | 4 +- boards.cfg | 3 + doc/README.mxs | 5 + drivers/mmc/fsl_esdhc.c | 2 + drivers/mtd/nand/mxs_nand.c | 3 + drivers/net/fec_mxc.c | 4 +- drivers/net/fec_mxc.h | 4 +- include/configs/apf27.h | 388 ++++++++++++++++++++ include/configs/mx35pdk.h | 1 - include/configs/mx6sabresd.h | 4 + include/configs/mx6slevk.h | 14 + include/configs/sansa_fuze_plus.h | 70 ++++ include/configs/wandboard.h | 4 +- include/configs/xfi3.h | 69 ++++ tools/imximage.c | 8 +- tools/mxsboot.c | 10 +- 53 files changed, 3269 insertions(+), 93 deletions(-) create mode 100644 board/armadeus/apf27/Makefile create mode 100644 board/armadeus/apf27/apf27.c create mode 100644 board/armadeus/apf27/apf27.h create mode 100644 board/armadeus/apf27/fpga.c create mode 100644 board/armadeus/apf27/fpga.h create mode 100644 board/armadeus/apf27/lowlevel_init.S create mode 100644 board/creative/xfi3/Makefile create mode 100644 board/creative/xfi3/spl_boot.c create mode 100644 board/creative/xfi3/xfi3.c create mode 100644 board/sandisk/sansa_fuze_plus/Makefile create mode 100644 board/sandisk/sansa_fuze_plus/sfp.c create mode 100644 board/sandisk/sansa_fuze_plus/spl_boot.c create mode 100644 include/configs/apf27.h create mode 100644 include/configs/sansa_fuze_plus.h create mode 100644 include/configs/xfi3.h
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de =====================================================================
Hi Stefano,
Quoted 138 lines · Stefano Babic
Hi Albert,
please pull from u-boot-imx, thanks !
The following changes since commit
8386ca8bea7a6a8469c3b6a99313afb642e6cbeb:Revert "standalone-examples: support custom GCC lib" (2013-09-12
10:27:29 -0400)are available in the git repository at:
git://www.denx.de/git/u-boot-imx.gitmasterfor you to fetch changes up to
ce7a7f5e6bda35d7d0972be07b6983552d1a2cb2:i.MX6DQ/DLS: Add pad
MX6_PAD_GPIO_1__USB_OTG_ID(2013-09-27 13:53:35
+0200)----------------------------------------------------------------
Andrew Gabbasov (1):
mx6: Fix calculation ofemi_slowclock rateElie De Brauwer (1):
mxs_nand: Fix ECC strength for NAND flash with OOB size of 224Eric Nelson (2):
i.MX6DL/S: add drive-strength back to pads DISP0_DAT2/DAT10 i.MX6DQ/DLS: Add padMX6_PAD_GPIO_1__USB_OTG_IDFabio Estevam (17):
mx6sabresd: Add LVDS splash screen support
wandboard: Use imx6dl-wandboard.dtb for the solo version
mx6sabresd: Avoid hang when HDMI cable is not connected
mx6sabresd: Reset counter to prevent error message
mmc:fsl_esdhc: Check the result frommalloc()
mx35pdk: RemoveCONFIG_SYS_CACHELINE_SIZE
mx6sabresd: Return error ifcpu_eth_init()fails
mx6qsabreauto: Return error ifcpu_eth_init()fails
net:fec_mxc: Add support for mx6 solo-lite
mx6slevk: Add Ethernet support
mx28evk: Fix checkpatch warning
doc: README.mxs: Add instruction to install 'libssl-dev'
mx6sabresd: Fix the fdt file for the mx6dl version
net:fec_mxc: Fix timeouts during tftp transfer
mx28evk: Propagate the error ifcpu_eth_init()fails
mx28evk: Propagate the error ifcpu_eth_init()fails
mx35pdk: Fix error handling inboard_late_init()Marek Vasut (6):
tools: mxsboot: Mark the FCB pages as valid
ARM: mxs: Sort the mx23evk andmx23_olinuxino
ARM: mxs: Document the power block initialization
ARM: mxs: Receive r0 and r1 passed from BootROM
ARM: mxs: Add Creative ZEN XFi3 board
ARM: mxs: Add SanDisk Sansa Fuze+ boardMarkus Niebel (1):
ARM: arch-mx6: fixPLL2_PFD2_FREQPierre Aubert (1):
mx6: Fix use of improper value inenable_ipu_clockRobert Winkler (1):
imx: nitrogen6x/mx6qsabrelite: Fix bug inboard_video_skipStefano Babic (1):
Merge branch 'master' ofgit://git.denx.de/u-boot-armYork Sun (1):
tools/imximage.c: Fix compiling warningtrem (3):
mx27: add missing constant for mx27
apf27: add support for the armadeus APF27 board
apf27: add FPGA support for the apf27 boardarch/arm/cpu/arm926ejs/mx27/asm-offsets.c | 5 + arch/arm/cpu/arm926ejs/mxs/spl_boot.c | 5 +- arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 209 +++++++++++ arch/arm/cpu/arm926ejs/mxs/start.S | 50 ++- arch/arm/cpu/armv7/mx6/clock.c | 40 +- arch/arm/include/asm/arch-mx27/imx-regs.h | 6 +- arch/arm/include/asm/arch-mx6/clock.h | 1 + arch/arm/include/asm/arch-mx6/crm_regs.h | 2 +- arch/arm/include/asm/arch-mx6/iomux.h | 5 + arch/arm/include/asm/arch-mx6/mx6dl_pins.h | 6 +- arch/arm/include/asm/arch-mx6/mx6q_pins.h | 1 + arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 12 + arch/arm/include/asm/arch-mxs/sys_proto.h | 5 +- board/armadeus/apf27/Makefile | 33 ++ board/armadeus/apf27/apf27.c | 256 +++++++++++++ board/armadeus/apf27/apf27.h | 489 +++++++++++++++++++++++++ board/armadeus/apf27/fpga.c | 224 +++++++++++ board/armadeus/apf27/fpga.h | 25 ++ board/armadeus/apf27/lowlevel_init.S | 168 +++++++++ board/bluegiga/apx4devkit/spl_boot.c | 4 +- board/boundary/nitrogen6x/nitrogen6x.c | 4 +- board/creative/xfi3/Makefile | 31 ++ board/creative/xfi3/spl_boot.c | 134 +++++++ board/creative/xfi3/xfi3.c | 224 +++++++++++ board/denx/m28evk/m28evk.c | 2 + board/denx/m28evk/spl_boot.c | 4 +- board/freescale/mx23evk/spl_boot.c | 4 +- board/freescale/mx28evk/iomux.c | 4 +- board/freescale/mx28evk/mx28evk.c | 4 +- board/freescale/mx35pdk/mx35pdk.c | 10 +- board/freescale/mx6qsabreauto/mx6qsabreauto.c | 2 +- board/freescale/mx6sabresd/mx6sabresd.c | 169 +++++++-- board/freescale/mx6slevk/mx6slevk.c | 68 ++++ board/olimex/mx23_olinuxino/spl_boot.c | 4 +- board/sandisk/sansa_fuze_plus/Makefile | 31 ++ board/sandisk/sansa_fuze_plus/sfp.c | 388 ++++++++++++++++++++ board/sandisk/sansa_fuze_plus/spl_boot.c | 140 +++++++ board/schulercontrol/sc_sps_1/spl_boot.c | 4 +- boards.cfg | 3 + doc/README.mxs | 5 + drivers/mmc/fsl_esdhc.c | 2 + drivers/mtd/nand/mxs_nand.c | 3 + drivers/net/fec_mxc.c | 4 +- drivers/net/fec_mxc.h | 4 +- include/configs/apf27.h | 388 ++++++++++++++++++++ include/configs/mx35pdk.h | 1 - include/configs/mx6sabresd.h | 4 + include/configs/mx6slevk.h | 14 + include/configs/sansa_fuze_plus.h | 70 ++++ include/configs/wandboard.h | 4 +- include/configs/xfi3.h | 69 ++++ tools/imximage.c | 8 +- tools/mxsboot.c | 10 +- 53 files changed, 3269 insertions(+), 93 deletions(-) create mode 100644 board/armadeus/apf27/Makefile create mode 100644 board/armadeus/apf27/apf27.c create mode 100644 board/armadeus/apf27/apf27.h create mode 100644 board/armadeus/apf27/fpga.c create mode 100644 board/armadeus/apf27/fpga.h create mode 100644 board/armadeus/apf27/lowlevel_init.S create mode 100644 board/creative/xfi3/Makefile
Quoted 9 lines
create mode 100644 board/creative/xfi3/spl_boot.c create mode 100644 board/creative/xfi3/xfi3.c create mode 100644 board/sandisk/sansa_fuze_plus/Makefile create mode 100644 board/sandisk/sansa_fuze_plus/sfp.c create mode 100644 board/sandisk/sansa_fuze_plus/spl_boot.c create mode 100644 include/configs/apf27.h create mode 100644 include/configs/sansa_fuze_plus.h create mode 100644 include/configs/xfi3.h
Applied to u-boot-arm/master, thanks!
Amicalement,
Signature · 1 line
Albert.