board/bsc9131rdb: Update IFC timings for NAND flash
PATCH v2 1/1 board/bsc9131rdb: Update IFC timings for NAND flash
Current IFC timings for NAND flash are not able to support existing K9F1G08U0B and new K9F1G08U0D flash.
so Update the timings to support both.
Signed-off-by Prabhakar Kushwaha <[email protected]>
---
Changes for v2: updated subject
include/configs/BSC9131RDB.h | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
include/configs/BSC9131RDB.h +8 -8
@@ -181,18 +181,18 @@ extern unsigned long get_sdram_size(void); | CSOR_NAND_PB(64)) /*Pages Per Block = 64*//* NAND Flash Timing Params */ -#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x08) \ - | FTIM0_NAND_TWP(0x06) \ - | FTIM0_NAND_TWCHT(0x03) \ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x03) \ + | FTIM0_NAND_TWP(0x05) \ + | FTIM0_NAND_TWCHT(0x02) \ | FTIM0_NAND_TWH(0x04)) -#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x18) \ - | FTIM1_NAND_TWBE(0x23) \ - | FTIM1_NAND_TRR(0x08) \ +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x1C) \ + | FTIM1_NAND_TWBE(0x1E) \ + | FTIM1_NAND_TRR(0x07) \ | FTIM1_NAND_TRP(0x05))#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x08) \ | FTIM2_NAND_TREH(0x04) \ - | FTIM2_NAND_TWHRE(0x3f)) -#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x22) + | FTIM2_NAND_TWHRE(0x11)) +#define CONFIG_SYS_NAND_FTIM3 FTIM3_NAND_TWW(0x04)#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE }#define CONFIG_SYS_MAX_NAND_DEVICE 1
Signature · 1 line
1.7.9.5
PATCH v2 1/1 board/bsc9131rdb: Update IFC timings for NAND flash
Quoted 10 lines · Prabhakar Kushwaha
Current IFC timings for NAND flash are not able to support existing K9F1G08U0B and new K9F1G08U0D flash.
so Update the timings to support both.
Signed-off-by Prabhakar Kushwaha <[email protected]>---
Changes for v2: updated subject
Applied to u-boot-mpc85xx/next, pending merging to u-boot-mpc85xx/master branch.
York