Skip to contentSkip to conversation

powerpc/B4860: enable PBL tool for B4860

PATCH New shh.xie at gmail.com 2 participants 2 messages Sep 22, 2013 – Sep 27, 2013

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 powerpc/B4860: enable PBL tool for B4860

From: Shaohui Xie <[email protected]>

Use a default RCW of protocol 0x2A_0x98, and a PBI configure file which uses CPC1 as 512KB SRAM, then PBL tool can be used on B4860 to build a pbl boot image.

---
 board/freescale/b4860qds/b4_pbi.cfg |   27 +++++++++++++++++++++++++++
 board/freescale/b4860qds/b4_rcw.cfg |    7 +++++++
 include/configs/B4860QDS.h          |    2 ++
 3 files changed, 36 insertions(+), 0 deletions(-)
 create mode 100644 board/freescale/b4860qds/b4_pbi.cfg
 create mode 100644 board/freescale/b4860qds/b4_rcw.cfg
board/freescale/b4860qds/b4_pbi.cfg new file +27 -0
new file mode 100644
index 0000000..57b726e
@@ -0,0 +1,27 @@
+#PBI commands
+#Initialize CPC1
+09010000 00200400
+09138000 00000000
+091380c0 00000100
+#Configure CPC1 as 512KB SRAM
+09010100 00000000
+09010104 fff80009
+09010f00 08000000
+09010000 80000000
+#Configure LAW for CPC1
+09000d00 00000000
+09000d04 fff80000
+09000d08 81000012
+#Configure alternate space
+09000010 00000000
+09000014 ff000000
+09000018 81000000
+#Configure SPI controller
+09110000 80000403
+09110020 2d170008
+09110024 00100008
+09110028 00100008
+0911002c 00100008
+#Flush PBL data
+09138000 00000000
+091380c0 00000000
board/freescale/b4860qds/b4_rcw.cfg new file +7 -0
new file mode 100644
index 0000000..7bf0066
@@ -0,0 +1,7 @@
+#PBL preamble and RCW header
+aa55aa55 010e0100
+# serdes protocol 0x2A_0x98
+140e0018 0f001218 00000000 00000000
+54980000 9000a000 f8025000 a9000000
+01000000 00000000 00000000 0001b1f8
+00000000 14000020 00000000 00000011
include/configs/B4860QDS.h +2 -0
index 3082d00..05c1632 100644
@@ -32,6 +32,8 @@
 #ifdef CONFIG_RAMBOOT_PBL
 #define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
+#define CONFIG_PBLPBI_CONFIG $(SRCTREE)/board/freescale/b4860qds/b4_pbi.cfg
+#define CONFIG_PBLRCW_CONFIG $(SRCTREE)/board/freescale/b4860qds/b4_rcw.cfg
 #endif
 
 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
Signature · 1 line
1.7.0.4
#1 lore raw

PATCH 1/1 powerpc/B4860: enable PBL tool for B4860

Quoted 8 lines · shh.xie at gmail.com

From: Shaohui Xie <[email protected]>

Use a default RCW of protocol 0x2A_0x98, and a PBI configure file which uses CPC1 as 512KB SRAM, then PBL tool can be used on B4860 to build a pbl boot image.

---

Applied to u-boot-mpc85xx/next, pending merging to u-boot-mpc85xx/master branch.

York