powerpc/tool/pbl: fix pbl image compiling process
PATCH 1/1 powerpc/tool/pbl: fix pbl image compiling process
From: Shaohui Xie <[email protected]>
Previous process of compiling a PBL boot image is:
1: make <board_name_config>
2: make u-boot.pbl
for example:
make T4240QDS_SDCARD_config
make u-boot.pbl
Now the process is:
1: make <board_name>
for example:
make T4240QDS_SDCARD
Also, updated README.pblimage.
--- Makefile | 1 + doc/README.pblimage | 15 ++++++--------- 2 files changed, 7 insertions(+), 9 deletions(-)
Makefile +1 -0
@@ -397,6 +397,7 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin +ALL-$(CONFIG_RAMBOOT_PBL) += $(obj)u-boot.pbl ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin ALL-$(CONFIG_SPL_FRAMEWORK) += $(obj)u-boot.img ALL-$(CONFIG_TPL) += $(obj)tpl/u-boot-tpl.bin
doc/README.pblimage +6 -9
@@ -14,20 +14,17 @@ Building PBL Boot Image and boot steps 1. Building PBL Boot Image. The default Image is u-boot.pbl. - For eSPI boot(available on P3041/P4080/P5020): + For eSPI boot(available on P2041/P3041/P4080/P5020/P5040/T4240): To build the eSPI boot image: - make <board_name>_SPIFLASH_config - make u-boot.pbl + make <board_name>_SPIFLASH - For SD boot(available on P3041/P4080/P5020): + For SD boot(available on P2041/P3041/P4080/P5020/P5040/T4240): To build the SD boot image: - make <board_name>_SDCARD_config - make u-boot.pbl + make <board_name>_SDCARD - For Nand boot(available on P3041/P5020): + For Nand boot(available on P2041/P3041/P5020/P5040): To build the NAND boot image: - make <board_name>_NAND_config - make u-boot.pbl + make <board_name>_NAND 2. pblimage support available with mkimage utility will generate Freescale PBL
Signature · 1 line
1.7.0.4
PATCH 1/1 powerpc/tool/pbl: fix pbl image compiling process
Quoted 58 lines · shh.xie at gmail.com
From: Shaohui Xie <[email protected]>
Previous process of compiling a PBL boot image is:
1: make <board_name_config>
2: make u-boot.pblfor example:
makeT4240QDS_SDCARD_config
make u-boot.pblNow the process is:
1: make <board_name>for example:
makeT4240QDS_SDCARDAlso, updated README.pblimage.
Signed-off-by Shaohui Xie <[email protected]>--- Makefile | 1 + doc/README.pblimage | 15 ++++++--------- 2 files changed, 7 insertions(+), 9 deletions(-)Makefile +1
-0@@ -397,6 +397,7 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin +ALL-$(CONFIG_RAMBOOT_PBL) += $(obj)u-boot.pbl ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin ALL-$(CONFIG_SPL_FRAMEWORK) += $(obj)u-boot.img ALL-$(CONFIG_TPL) += $(obj)tpl/u-boot-tpl.bindoc/README.pblimage +4
-6@@ -14,20 +14,17 @@ Building PBL Boot Image and boot steps 1. Building PBL Boot Image. The default Image is u-boot.pbl. - For eSPI boot(available on P3041/P4080/P5020): + For eSPI boot(available on P2041/P3041/P4080/P5020/P5040/T4240): To build the eSPI boot image: - make <board_name>_SPIFLASH_config - make u-boot.pbl + make <board_name>_SPIFLASH - For SD boot(available on P3041/P4080/P5020): + For SD boot(available on P2041/P3041/P4080/P5020/P5040/T4240): To build the SD boot image: - make <board_name>_SDCARD_config - make u-boot.pbl + make <board_name>_SDCARD
doc/README.pblimage Building PBL Boot Image and boot steps · line 30
Quoted 10 lines
doc/README.pblimage +2
-3- For Nand boot(available on P3041/P5020): + For Nand boot(available on P2041/P3041/P5020/P5040): To build the NAND boot image: - make <board_name>_NAND_config - make u-boot.pbl + make <board_name>_NAND 2. pblimage support available with mkimage utility will generate Freescale PBL
Tom,
Can I get your ack since this patch changes Makefile?
York
PATCH 1/1 powerpc/tool/pbl: fix pbl image compiling process
In reply to shh.xie at gmail.comQuoted 13 lines · shh.xie at gmail.com
From: Shaohui Xie <[email protected]>
Previous process of compiling a PBL boot image is:
1: make <board_name_config>
2: make u-boot.pblfor example:
makeT4240QDS_SDCARD_config
make u-boot.pblNow the process is:
1: make <board_name>
Quoted 7 lines
for example:
makeT4240QDS_SDCARDAlso, updated README.pblimage.
Signed-off-by Shaohui Xie <[email protected]>---
Applied to u-boot-mpc85xx/next, pending merging to u-boot-mpc85xx/master branch.
York